6kVA Inverter ETP23006-C1A1 (01075389) Datasheet Draft-05 - (20200716)

Inverter
ETP23006-C1A1
Introduction
The Inverter converts DC power into 220V AC power to provide high performance and uninterrupted
AC power supply for AC devices.
Features
 Reliable: Supports N+1 backup
 Easy maintenance: Hot swap and online replacement Inverter
 Intelligent: Remote management
Scenario
 Communication site with AC equipment
Specifications
System Specifications
Dimensions (H× W × D) 43.6mm×442mm×330mm
Weight ≤ 15 Kg
Heat Dissipation Mode Air cooling
Protection Level IP20
Output Capacity 6kVA max
Number of DC Input Channels 1*200A (Terminal)
Current 150A max
Voltage 43.2 ~ 58 V, Rated 48V
DC Input Undervoltage Alarm Threshold 45V
Overvoltage Alarm Threshold 58V
Undervoltage Protection Threshold Protection point：42V，Restoring point: 45V
Overvoltage Protection Threshold Protection point：60V，Restoring point58V
The current version automatically becomes invalid after a new version is released. Release Date：2020-07-16
Specifications
Number of AC Output Channels 1*63A (Circuit breaker)
Output Voltage 220 Vac±2%
Output Frequency 50Hz±1%
Output Surge Protection 30KA/30KA
Peak Efficiency ≥94%

AC Output
Output Power Factor 0.8
105%≤ Load ≤125%, the value is greater than 1min.

Overload Capability 125%< Load ≤150%, the value is greater than 5s. 150%< Load ≤200%, the value is
greater than 1s
Output Current Peak Coefficient 3:1
Output Parallel Function Support
Communication Port CAN
DC Input Overvoltage or undervoltage
Protection Function AC Output Overvoltage, undervoltage, overcurrent, over-power, short-circuit protection
Temperature Overtemperature protection
Insulation Resistance Not less than 2M
Audio Noise <60DB
Reference Standards for & CE passed the TUV and CE certification, obtained the CB certificate
Certification IEC/EN 62368、60950，TLC ，RoHS，Reach，WEEE
Operating Temperature -40ºC – +75ºC（+55°C derating）
Storage Temperature –40℃- +75℃（without package）

Working Environment
Altitude 0 - 5000 m （1ºC per 200 m temperature derating from 2000 to 5000 m ）
Relative Humidity 5% - 95% （no condensation）
ACDB220-63-12B
AC Power Distribution Boxes
Introduction
The AC power distribution box (ACDB220-63-12B) is used for AC power distribution. It provides 12 16A
AC outputs and can be used with the inverter. The power distribution box supports the integrated
installation of the 19-inch support and provides good surge protection capability.
Specifications
Product Type ACDB220-63-12B

Dimensions (W× D× H) 442mm × 330mm × 43.6mm
Weight About 8kg
Maintenance Mode Front

System
Cabling Mode Front
Installation Mode 19-inch rack installation
Protection Level IP20
Input Mode Single-phase 220Vac
Input Current 63A max

AC
Pow er AC Output 12-channel 16A MCB
Distribution
Surge Protection 30kA，8/20us
Ground Bar 12-channel M4
Operating Temperature -40℃~+55℃
Storage Temperature -40℃~+70℃

Environment
Relative Humidity 5%-95%（no condensation）
Altitude 0～4000m （1ºC per 200 m temperature derating from 2000 to 4000 m ）
Copyright © Huawei Technologies Co., Ltd. 2020. All rights reserved. HUAWEI TECHNOLOGIES CO., LTD.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Huawei Industrial Base
General Disclaimer Bantian Longgang
The information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating results, future product Shenzhen 518129, P.R. China
portfolio, new technology, etc. There are a number of factors that could cause actual results and developments to differ materially from those expressed or implied in the
predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an offer nor an acceptance. Huawei may change the information Tel: +86-755-28780808
at any time without notice.
www.huawei.com

6kVA Inverter ETP23006-C1A1 (01075389) Datasheet Draft-05 - (20200716)

Uploaded by

Copyright:

Available Formats

6kVA Inverter ETP23006-C1A1 (01075389) Datasheet Draft-05 - (20200716)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

6kVA Inverter ETP23006-C1A1 (01075389) Datasheet Draft-05 - (20200716)

Uploaded by

Copyright:

Available Formats

Inverter

Heat Dissipation Mode Air cooling

Protection Level IP20

Output Capacity 6kVA max

Number of DC Input Channels 1*200A (Terminal)

Current 150A max

Voltage 43.2 ~ 58 V, Rated 48V

DC Input Undervoltage Alarm Threshold 45V

Overvoltage Alarm Threshold 58V

Undervoltage Protection Threshold Protection point：42V，Restoring point: 45V

Overvoltage Protection Threshold Protection point：60V，Restoring point58V

Output Voltage 220 Vac±2%

Output Frequency 50Hz±1%

Output Surge Protection 30KA/30KA

Peak Efficiency ≥94%

105%≤ Load ≤125%, the value is greater than 1min.

Output Current Peak Coefficient 3:1

Output Parallel Function Support

Communication Port CAN

DC Input Overvoltage or undervoltage

Protection Function AC Output Overvoltage, undervoltage, overcurrent, over-power, short-circuit protection

Temperature Overtemperature protection

Insulation Resistance Not less than 2M

Audio Noise <60DB

Operating Temperature -40ºC – +75ºC（+55°C derating）

Storage Temperature –40℃- +75℃（without package）

Relative Humidity 5% - 95% （no condensation）

Product Type ACDB220-63-12B

Weight About 8kg

Maintenance Mode Front

Installation Mode 19-inch rack installation

Protection Level IP20

Input Mode Single-phase 220Vac

Input Current 63A max

Ground Bar 12-channel M4

Operating Temperature -40℃~+55℃

Storage Temperature -40℃~+70℃

You might also like