How To Make Simple Creamy Coffee Milk

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 6

How to Make Simple Creamy Coffee Milk

Ingredients:
 1 teaspoon of coffee powder
 1½ spoons of full cream milk
 ½ teaspoon of sugar (you can skip this because full cream milk is fairly sweet)
 A cup of water

Utensils that we need:


 A teaspoon
 A cup

Steps:

1. Take the coffee powder, sugar, and full cream milk in the cup.
2. Whisk the mixture rigorously by using the spoon until its color becomes light brown.
3. Heat a cup of water in pan and wait until it’s boiled.
4. After that, pour the boiled water into the cup that has the mixture of coffee cream in it.
5. Then, stir it well by the spoon.
6. Once done, a cup of hot coffee milk is ready to be served.
How to Clean a Washing Machines

Materials:

 White vinegar or baking soda


 Microfiber cloth or sponge
 Old toothbrush
 Dish soap
 Clean, dry cloth or towel

Procedure:

1. Check the manufacturer’s instructions. Before you start cleaning, check your washing
machine’s manual for any specific cleaning instructions provided by the manufacturer.
2. Wipe down the exterior of the washing machine with a damp microfiber cloth or sponge. If
there are stubborn stains, mix a solution of water and a small amount of dish soap to clean
the surfaces.
3. Run an empty cycle with hot water to clean the drum. Add either 1 cup of white vinegar or 1/2
cup of baking soda to the detergent dispenser. This helps remove any detergent residue, mold,
and mildew.
4. Clean the Dispensers and Seals:
a. Remove the detergent, fabric softener, and bleach dispensers (if applicable) from the
machine.
b. Soak them in a solution of equal parts water and white vinegar for about 15-20 minutes.
Scrub any remaining residue with an old toothbrush.
c. Wipe the rubber seals around the door with a vinegar-soaked cloth to remove any mold or
mildew.
5. Clean the Filter (if applicable):
a. Check your washing machine for a lint filter or debris trap. If present, consult your manual
on how to remove and clean it.
b. Rinse the filter under running water and remove any accumulated lint or debris.
6. Clean the Drain Pump (if applicable):
Some washing machines have a drain pump filter that may need cleaning. Refer to your
manual for instructions on how to access and clean it.
7. To remove any remaining residue and odors, run a maintenance wash. You can do this by
running an empty hot water cycle with 1 cup of white vinegar or 1/2 cup of baking soda.
8. After completing the cleaning cycles, leave the washing machine door open for a while to
allow the drum to air out and prevent the growth of mold or mildew.
9. Once the interior is cleaned, wipe down the exterior of the machine with a clean, dry cloth.
10. Regular Maintenance:
a. To prevent future buildup, leave the door open after each wash to allow the drum to dry.
b. Clean the dispensers and wipe the rubber seals regularly.
c. Perform a maintenance wash with vinegar or baking soda every few months.
How to Use Camera

Materials you need:

 A digital camera DSLR or pocket camera or the others camera that you have.
 The object. You can find something that interesting like buildings, human, animals, plants, or
the others.

Steps:

1. Handle the camera and turn on it.


2. Center the object in the LCD and manage the z00m. Control until you get the best view.
3. When you are ready to take the picture, hold the shutter speed and various other calculations.
4. Then, a light should appear that let you know the camera is set to go.
5. After that, press shutter all the way down.

(Sumber: issu.com)
How to Use Printer

Materials you need:

 A printer
 Some papers
 A laptop

Steps:

1. Plug in the power cable of the printer and turn it on.


2. Go to your laptop/computer and find the “printer setting”.
3. Click “Add a printer” and follow the further instructions that appear.
4. It is ready to use.
How to Use a Blender

Materials you need:

 A blender
 Some fruits, vegetables, ice, milk, or any kind of food and drinks.

Steps:

1. Cut the ingredients into smaller pieces if the ingredients were solid and big.
2. Prepare the blender jar, make sure to clean it before we use it and put the blender blades on
the bottom of the jar.
3. Place the blender jar on the blender machine.
4. Insert the plug into the electricity socket.
5. Put all of the ingredients into the blender jar.
6. Add some water to help the blender mix the ingredients evenly.
7. Close the lid and cover the blender jar tightly.
8. Start the blender by pressing the speed button, you can start from the medium speed.
9. Wait until we get the right texture of the mixture, we can adjust the speed and also add some
more water if necessary.
10. Open the blender and pour the mixture into a glass or bowl.
11. After the usage, don’t forget to clean the blender jar, lid, and blades.

(Sumber: kampunginggris.online)
How to Operate The Computer

Materials you need:

A computer and a set of computer devices.

Steps:

How to operate the computer consists of three stages, they are how to turn on the computer, how
to operate the computer itself, and how to turn off the computer.

1. How to Turn On The Computer

Before turning on the computer, there are several things to be aware of to make sure devices
such as keyboard, mouse, monitor and a power cable in a state of connected to the power supply
and make sure the PC is installed the Operating System. Here are the steps to turn on the
computer:

1. Press the power button on the CPU.


2. Push of a power button on the monitor.
3. Wait a few moments until the loading process window pops up windows and computer/PC is
ready for use.

After that, unplug it from the wall socket. Its aim is to save power and to anticipate the
occurrence of electrical short circuit.

(Sumber: belajarbahasainggrisku.id)

You might also like