Cybersecurity Unit-2 Notes

1
UNIT -II: Cybercrime Mobile and Wireless Devices:
1. Introduction,
2. Proliferation (Growth) of Mobile and Wireless Devices,
3. Trends in Mobility,
4. Credit Card Frauds in Mobile and Wireless Computing Era,
5. Security Challenges Posed by Mobile Devices,
6. Registry Settings for Mobile Devices,
7. Authentication Service Security,
8. Attacks on Mobile/Cell Phones,
9. Mobile Devices: Security Implications for Organizations,
10.Organizational Measures for Handling Mobile,
11.Organizational Security Policies and Measures in Mobile Computing Era,
12.Laptops.
Prepared by:Suraj B S
2
Introduction
 In this modern era, the rising importance of electronic gadgets (i.e., mobile hand-held
devices) – which became an integral part of business, providing connectivity with the
Internet outside the office – brings many challenges to secure these devices from being a
victim of cybercrime.
 In the recent years, the use of laptops, personal digital assistants (PDAs), and mobile
phones has grown from limited user communities to widespread desktop replacement and
broad deployment.
 By the end of 2008 around 1.5 billion individuals around the world had the Internet
access.
 In November 2007, mobile phone users were numbered 3.3 billion, with a growing
proportion of those mobile devices enabled for the Internet access.
 The complexity of managing these devices outside the walls of the office is something
that the information technology (IT) departments in the organizations need to address.
 Remote connection has extended from fixed location dial-in to wireless-on-the-move, and
smart hand-held devices such as PDAs have become networked, converging with mobile
phones.
 Furthermore, the maturation of the PDA and advancements in cellular phone technology
have converged into a new category of mobile phone device: the Smartphone.
 Smartphones combine the best aspects of mobile and wireless technologies and blend
them into a useful business tool.
 Although IT departments of organizations as yet are not swapping employees’ company-
provided PDAs (as the case may be) for the Smartphones, many users may bring these
devices from home and use them in the office.
 Thus, the larger and more diverse community of mobile users and their devices increase
the demands on the IT function to secure the device, data and connection to the network,
keeping control of the corporate assets, while at the same time supporting mobile user
productivity.
 Clearly, these technological developments present a new set of security challenges to the
global organizations.
Proliferation (Growth) of Mobile and Wireless Devices

 Today, incredible advances are being made for mobile devices.
 The trend is for smaller devices and more processing power.
 A few years ago, the choice was between a wireless phone and a simple PDA. Now the
buyers have a choice between high-end PDAs with integrated wireless modems and small
phones with wireless Web-browsing capabilities.
 A simple hand-held mobile device provides enough computing power to run small
applications, play games and music, and make voice calls.
 As the term “mobile device” includes many products. We first provide a clear distinction
among the key terms: mobile computing, wireless computing and hand-held devices.
 Let us understand the concept of mobile computing and the various types of devices.
Mobile computing
Mobile computing is “taking a computer and all necessary files and software out into the
field.” Many types of mobile computers have been introduced since 1990s.
3
 They are as follows:

1. Portable computer: It is a general-purpose computer that can be easily moved from one
place to another, but cannot be used while in transit, usually because it requires some
“setting-up” and an AC power source.
2. Tablet PC: It lacks a keyboard, is shaped like a slate or a paper notebook and has features
of a touch screen with a stylus and handwriting recognition software. Tablets may not be best
suited for applications requiring a physical keyboard for typing, but are otherwise capable of
carrying out most tasks that an ordinary laptop would be able to perform.
3. Internet tablet: It is the Internet appliance in tablet form. Unlike a Tablet PC, the Internet
tablet does not have much computing power and its applications suite is limited. Also it
cannot replace a general-purpose computer. The Internet tablets typically feature an MP3 and
video player, a Web browser, a chat application and a picture viewer.
4. Personal digital assistant (PDA): It is a small, usually pocket-sized, computer with
limited functionality. It is intended to supplement and synchronize with a desktop computer,
giving access to contacts, address book, notes, E-Mail and other features.
5. Ultramobile PC: It is a full-featured, PDA-sized computer running a general-purpose
operating system (OS).
6. Smartphone: It is a PDA with integrated cell phone functionality. Current Smartphones
have a wide range of features and installable applications.
7. Carputer: It is a computing device installed in an automobile. It operates as a wireless
computer, sound system, global positioning system (GPS) and DVD player. It also contains
word processing software and is Bluetooth compatible.
8. Fly Fusion Pentop computer: It is a computing device with the size and shape of a pen. It
functions as a writing utensil, MP3 player, language translator, digital storage device and
calculator.
Wireless computing
 Wireless refers to the method of transferring information between a computing device
(such as a PDA) and a data source (such as an agency database server) without a physical
connection.
 Not all wireless communication technologies are mobile. For example, lasers are used in
wireless data transfer between buildings, but cannot be used in mobile communications at
this time.
 Mobile simply describes a computing device that is not restricted to a desktop, that is, not
tethered. As more personal devices find their way into the enterprise, corporations are
realizing cybersecurity threats that come along with the benefits achieved with mobile
solutions.
 Mobile computing does not necessarily require wireless communication. In fact, it may
not require communication among devices at all.
 Thus, while “wireless” is a subset of “mobile,” in most cases, an application can be
mobile without being wireless.
 Smart hand-helds are defined as hand-held or pocket-sized devices that connect to a
wireless or cellular network, and can have software installed on them; this includes
networked PDAs and Smartphones.
Trends in Mobility
 Mobile computing is moving into a new era, third generation (3G), which promises
greater variety in applications and have highly improved usability as well as speedier
networking.
4
 “iPhone” from Apple and Google-led “Android” phones are the best examples of this
trend and there are plenty of other developments that point in this direction.
 This smart mobile technology is rapidly gaining popularity and the attackers (hackers and
crackers) are among its biggest fans.
 It is worth noting the trends in mobile computing; this will help readers to realize the
seriousness of cybersecurity issues in the mobile computing domain.
 Figure 3.3 shows the different types of mobility and their implications.
Popular types of attacks against 3G mobile networks are as follows:

1. Malwares, viruses and worms: Although many users are still in the transient process of
switching from 2G, 2.5G to 3G, it is a growing need to educate the community people and
provide awareness of such threats that exist while using mobile devices. Here are few
examples of malware(s) specific to mobile devices:
• Skull Trojan: It targets Series 60 phones equipped with the Symbian mobile OS.
• Cabir Worm: It is the first dedicated mobile-phone worm; infects phones running on
Symbian OS and scans other mobile devices to send a copy of itself to the first vulnerable
phone it finds through Bluetooth Wireless technology. The worst thing about this worm is
that the source code for the Cabir-H and Cabir-I viruses is available online.
• Mosquito Trojan: It affects the Series 60 Smart phones and is a cracked version of
“Mosquitos” mobile phone game.
• Brador Trojan: It affects the Windows CE OS by creating a svchost.exe file in the
Windows start-up folder which allows full control of the device. This executable file is
conductive to traditional worm propagation vector such as E-Mail file attachments (refer
to Appendix C).
• Lasco Worm: It was released first in 2005 to target PDAs and mobile phones running
the Symbian OS. Lasco is based on Cabir’s source code and replicates over Bluetooth
connection.
5
2. Denial-of-service (DoS): The main objective behind this attack is to make the system
unavailable to the intended users. Virus attacks can be used to damage the system to make the
system unavailable.
3. Overbilling attack: Overbilling involves an attacker hijacking a subscriber’s IP address
and then using it (i.e., the connection) to initiate downloads that are not “Free downloads” or
simply use it for his/her own purposes. In either case, the legitimate user is charged for the
activity which the user did not conduct.
4. Spoofed policy development process (PDP): These types of attacks exploit the
vulnerabilities in the GTP [General Packet Radio Service (GPRS) Tunneling Protocol].
5. Signaling-level attacks: The Session Initiation Protocol (SIP) is a signaling protocol used
in IP multimedia subsystem (IMS) networks to provide Voice Over Internet Protocol (VoIP)
services. There are several vulnerabilities with SIP-based VoIP systems.
Credit Card Frauds in Mobile and Wireless Computing Era

 These are new trends in cybercrime that are coming up with mobile computing – mobile
commerce (M- Commerce) and mobile banking (M-Banking).
 Credit card frauds are now becoming commonplace given the ever- increasing power and
the ever-reducing prices of the mobile hand-held devices, factors that result in easy
availability of these gadgets to almost anyone.
 Mobile credit card transactions are now very common; new technologies combine low-
cost mobile phone technologies with the capabilities of a point-of-sale (POS) terminal.
 Today belongs to “mobile computing,” that is, anywhere anytime computing.
 The developments in wireless technology have fuelled this new mode of working for
white collar workers.
 Wireless credit card processing is a very desirable system, because it allows businesses to
process transactions from mobile locations quickly, efficiently and professionally.
 It is most often used by businesses that operate mainly in a mobile environment.
 Figure 3.4 shows the basic flow of transactions involved in purchases done using credit
cards.
6
 Credit card companies, normally, do a good job of helping consumers resolve identity
(ID) theft problems once they occur. But they could reduce ID fraud even more if they
give consumers better tools to monitor their accounts and limit high-risk transactions
 Figure 3.5, the basic flow is as follows:
1. Merchant sends a transaction to bank;
2. The bank transmits the request to the authorized cardholder
[not short message service (SMS)];
3. The cardholder approves or rejects (password protected);
4. The bank/merchant is notified;
5. The credit card transaction is completed.
(Box 3.2). Tips to Prevent Credit Card Frauds

 The current topic is about credit card frauds in mobile and wireless computing era,
however, we would like to include these tips to prevent credit card frauds[8] caused
due to individual ignorance about a few known facts.
Do’s
1. Put your signature on the card immediately upon its receipt.
2. Make the photocopy of both the sides of your card and preserve it at a safe place to
remember
the card number, expiration date in case of loss of card.
3. Change the default personal identification number (PIN) received from the bank before
doing any transaction.
4. Always carry the details about contact numbers of your bank in case of loss of your
card.
5. Carry your cards in a separate pouch/card holder than your wallet.
6. Keep an eye on your card during the transaction, and ensure to get it back immediately.
7
7. Preserve all the receipts to compare with credit card invoice.

8. Reconcile your monthly invoice/statement with your receipts.
9. Report immediately any discrepancy observed in the monthly invoice/statement.
10. Destroy all the receipts after reconciling it with the monthly invoice/statement.
11. Inform your bank in advance, about any change in your contact details such as home
address, cell phone number and E-Mail address.
12. Ensure the legitimacy of the website before providing any of your card details.
13. Report the loss of the card immediately in your bank and at the police station, if
necessary.
Dont’s
1. Store your card number and PINs in your cell.
2. Lend your cards to anyone.
3. Leave cards or transaction receipts lying around.
4. Sign a blank receipt (if the transaction details are not legible, ask for another receipt to
ensure the amount instead of trusting the seller).
5. Write your card number/PIN on a postcard or the outside of an envelope.
6. Give out immediately your account number over the phone (unless you are calling to a
company/ to your bank).
7. Destroy credit card receipts by simply dropping into garbage box/dustbin.
Types and Techniques of Credit Card Frauds
Traditional Techniques
 The traditional and the first type of credit card fraud is paper-based fraud – application
fraud, wherein a criminal uses stolen or fake documents such as utility bills and bank
statements that can build up useful personally Identifiable Information (PII) to open an
account in someone else’s name.
 Application fraud can be divided into
1. ID theft: Where an individual pretends to be someone else
2. Financial fraud: Where an individual gives false information about his or her financial
status to acquire credit. Illegal use of lost and stolen cards is another form of traditional
technique. Stealing a credit card is either by pickpocket or from postal service before it
reaches its final destination.
Modern Techniques
 Skimming is where the information held on either the magnetic strip on the back of the
credit card or the data stored on the smart chip are copied from one card to another.
 Site cloning and false merchant sites on the Internet are becoming a popular method of
fraud and to direct the users to such bogus/fake sites is called Phishing.
 Such sites are designed to get people to hand over their credit card details without
realizing that they have been directed to a fake weblink /website (i.e., they have been
scammed).
1. Triangulation: It is another method of credit card fraud and works in the fashion as
explained further.
• The criminal offers the goods with heavy discounted rates through a website designed and
hosted by him, which appears to be legitimate merchandise website.
• The customer registers on this website with his/her name, address, shipping address and
valid credit card details.
• The criminal orders the goods from a legitimate website with the help of stolen credit card
8
details and supply shipping address that have been provided by the customer while
registering on the criminal’s website.
• The goods are shipped to the customer and the transaction gets completed.
• The criminal keeps on purchasing other goods using fraudulent credit card details of
different customers till the criminal closes existing website and starts a new one.
2. Credit card generators: It is another modern technique – computer emulation software –
that creates valid credit card numbers and expiry dates. The criminals highly rely on these
generators to create valid credit cards. These are available for free download on the Internet.
Security Challenges Posed by Mobile Devices

 Mobility brings two main challenges to cybersecurity:
o first, on the hand-held devices, information is being taken outside the physically
controlled environment and
o second remote access back to the protected environment is being granted.
 Perceptions of the organizations to these cybersecurity challenges are important in
devising appropriate security operating procedure.
 As the number of mobile device users increases, two challenges are presented:
1. at the device level called “microchallenges” and
2. at the organizational level called “macrochallenges.”
 Some well-known technical challenges in mobile security are: managing the registry
settings and configurations, authentication service security, cryptography security,
Lightweight Directory Access Protocol (LDAP) security, remote access server (RAS )
security, media player control security, networking application program interface (API )
security, etc.
Registry Settings for Mobile Devices
 Let us understand the issue of registry settings on mobile devices through an example:
o Microsoft ActiveSync is meant for synchronization with Windows-powered personal
computers (PCs) and Microsoft Outlook.
o ActiveSync acts as the gateway between Windows-powered PC and Windows
mobile-powered device, enabling the transfer of applications such as Outlook
information, Microsoft Office documents, pictures, music, videos and applications
from a user’s desktop to his/her device.
o In addition to synchronizing with a PC, ActiveSync can synchronize directly with the
Microsoft exchange server so that the users can keep their E-Mails, calendar, notes
and contacts updated wirelessly when they are away from their PCs.
o In this context, registry setting becomes an important issue given the ease with
which various applications allow a free flow of information.
 Thus, establishing trusted groups through appropriate registry settings becomes crucial.
One of the most prevalent areas where this attention to security is applicable is within
“group policy.” Group policy is one of the core operations that are performed by
Windows Active Directory. (Run command box, type GPEDIT.MSC command to initiate the Local Group
Policy Editor)
9
 There is one more dimension to mobile device security: new mobile applications are
constantly being provided to help protect against Spyware, viruses, worms, malware and
other Malicious Codes that run through the networks and the Internet.
 The mobile security issues on a Windows platform is that the baseline security is not
configured properly.
 When you get a computer installed or use a mobile device for the first time, it may not be
100% secure. Even if users go through every Control Panel setting and group policy
option, they may not get the computer to the desired baseline security.
 For example, the only way to get a Windows computer to a security level that will be near
bulletproof is to make additional registry changes that are not exposed through any
interface.
 There are many ways to complete these registry changes on every computer, but some are
certainly more efficient than others.
 Naïve (Innocent) users may think that for solving the problem of mobile device security
there are not many registry settings to tackle.
 However, the reality is far different! The reality of the overall problem becomes prevalent
when you start researching and investigating the abundance of “registry hacks” that are
discussed in Microsoft Knowledge Base articles.
 Figure 3.7 displays an illustration of how some tools allow users to browse to the desired
registry value on their mobile devices.
10
Authentication Service Security

 There are two components of security in mobile computing: security of devices and
security in networks.
 A secure network access involves mutual authentication between the device and the base
stations or Web servers.
 This is to ensure that only authenticated devices can be connected to the network for
obtaining the requested services.
 No Malicious Code can impersonate (imitate) the service provider to trick the device into
doing something it does not mean to. Thus, the networks also play a crucial role in
security of mobile devices.
 Some eminent kinds of attacks to which mobile devices are subjected to are: push attacks,
pull attacks and crash attacks (see Figs. 3.8–3.10).
 Authentication services security is important given the typical attacks on mobile devices
through wireless networks: DoS attacks, traffic analysis, eavesdropping, man-in-the-
middle attacks and session hijacking.
11
12
Cryptographic Security for Mobile Devices

 Cryptographically Generated Addresses (CGA) is Internet Protocol version 6 (IPv6) that
addresses up to 64 address bits that are generated by hashing owner’s public-key address.
 The address the owner uses is the corresponding private key to assert address ownership
and to sign messages sent from the address without a public-key infrastructure (PKI) or
other security infrastructure.
 Deployment of PKI provides many benefits for users to secure their financial transactions
initiated from mobile devices.
 CGA-based authentication can be used to protect IP-layer signaling protocols including
neighbor discovery (as in context-aware mobile computing applications) and mobility
protocols.
 It can also be used for key exchange in opportunistic Internet Protocol Security (IPSec).
Palms (devices that can be held in one’s palm) are one of the most common hand-held
devices used in mobile computing.
 Cryptographic security controls are deployed on these devices.
 For example, the Cryptographic Provider Manager (CPM) in Palm OS5 is a system-
wide suite of cryptographic services for securing data and resources on a palm-powered
device.
 The CPM extends encryption services to any application written to take advantage of
these capabilities, allowing the encryption of only selected data or of all data and
resources on the device.
LDAP (Lightweight Directory Access Protocol) Security for Hand-Held Mobile

Computing Devices
 LDAP is a software protocol for enabling anyone to locate individuals, organizations and
other resources such as files and devices on the network (i.e., on the public Internet or on
the organizations’s Intranet).
 In a network, a directory tells you where an entity is located in the network.
 LDAP is a light weight (smaller Attacker Launches blended attack over rogue ad hoc
network (802.11, bluetooth, infrared) amount of code) version of Directory Access
Protocol (DAP) because it does not include security features in its initial version.
RAS (Remote Access Server) Security for Mobile Devices
 RAS (Remote Access Server) is an important consideration for protecting the business-
sensitive data that may reside on the employees’ mobile devices.
 In terms of cybersecurity, mobile devices are sensitive. Figure 3.11 : organization’s
sensitive data can happen through mobile hand-held devices carried by employees.
13
 In addition to being vulnerable to unauthorized access on their own, mobile devices also
provide a route into the systems with which they connect.
 By using a mobile device to appear as a registered user (impersonating or masquerading)
to these systems, a would-be cracker is then able to steal data or compromise corporate
systems in other ways.
 Another threat comes from the practice of port scanning.
 First, attackers use a domain name system (DNS) server to locate the IP address of a
connected computer. A domain is a collection of sites that are related in some sense.
 Second, they scan the ports on this known IP address, working their way through its
Transmission Control Protocol (TCP)/User Datagram Protocol (UDP) stack to see what
communication ports are unprotected by firewalls.
 For instance, File Transfer Protocol (FTP) transmissions are typically assigned to port 21.
 If this port is left unprotected, it can be misused by the attackers (see Box 3.5).
 Protecting against port scanning requires software that can trap unauthorized incoming
data packets and prevent a mobile device from revealing its existence and ID.
 A personal firewall on a pocket PC or Smartphone device can be an effective protective
screen against this form of attack for the users connecting through a direct Internet or
RAS connection.
Media Player Control Security

 Various leading software development organizations have been warning the users about
the potential security attacks on their mobile devices through the “music gateways.”
 There are many examples to show how a media player can turn out to be a source of
threat to information held on mobile devices.
 For example, in the year 2002, Microsoft Corporation warned about this.
 According to this news item, Microsoft had warned people that a series of flaws in its
Windows Media Player could allow a malicious hacker to hijack people’s computer
systems and perform a variety of actions.
 According to this warning from Microsoft, in the most severe exploit of a flaw, a hacker
could take over a computer system and perform any task the computer’s owner is allowed
to do, such as opening files or accessing certain parts of a network.
Networking API Security for Mobile Computing Applications

 With the advent of electronic commerce (E-Commerce) and its further off -shoot into M-
Commerce, online payments are becoming a common phenomenon with the payment
gateways accessed remotely and possibly wirelessly.
 Furthermore, with the advent of Web services and their use in mobile computing
applications, the API becomes an important consideration.
 Already, there are organizations announcing the development of various APIs to enable
software and hardware developers to write single applications
 Most of these developments are targeted specifically at securing a range of embedded and
consumer products, including those running OSs such as Linux, Symbian, Microsoft
Windows CE and Microsoft Windows Mobile (the last three are the most commonly used
OSs for mobile devices).
 Technological developments such as these provide the ability to significantly improve
cybersecurity of a wide range of consumer as well as mobile devices. Providing a
common software framework, APIs will become an important enabler of new and higher
value services.
14
Attacks on Mobile/Cell Phones

Mobile Phone Theft
 Mobile phones have become an integral part of everbody’s life and the mobile phone has
transformed from being a luxury to a bare necessity.
 Theft of mobile phones has risen dramatically over the past few years.
 Since huge section of working population in India use public transport, major locations
where theft occurs are bus stops, railway stations and traffic signals.
 Many Insurance Companies have stopped offering Mobile Theft Insurance due to a large
number of false claims.
 When anyone looses his/her mobile phone, more than anything “Contact List” and
“Personally Identifiable Information (PII)”, that really matter, are lost
 One might have just thought that his/her cell phone is much safer than a PC that is very
often attacked by viruses; however, criminals made this thought as false statement.
 After PC, the criminals’ (i.e., attackers’) new playground has been cell phones, reason
being the increasing usage of cell phones and availability of Internet using cell phones.
 Another reason is increasing demand for Wi-Fi zones in the metropolitans and extensive
usage of cell phones in the youths with lack of awareness/knowledge about the
vulnerabilities of the technology.
 The following factors contribute for outbreaks on mobile devices:
1. Enough target terminals: Enough terminals or more devices to attack.
2. Enough functionality: The expanded functionality ie. office functionality and
applications also increases the probability of malware.
3. Enough connectivity: Smartphones offer multiple communication options, such as SMS,
MMS, synchronization, Bluetooth, infrared (IR) and WLAN connections.
Box 3.6 | Tips to Secure your Cell/Mobile Phone from being Stolen/Lost
Ensure to note the following details about your cell phone and preserve it in a safe place:
1. Your phone number; 2. the make and model; 3. color and appearance details;
4. PIN and/or security lock code; 5. IMEI number.
The International Mobile Equipment Identity (IMEI)
 It is a number unique to every GSM, WCDMA and iDEN cell phone. It is a 15-digit
number and can be obtained by entering *#06# from the keypad.
 The IMEI number is used by the GSM network to identify valid devices and therefore
can be used to stop a stolen phone from accessing the network in that country.
 For example, if a mobile phone is stolen, the owner can call his or her service
provider and instruct them to “lock” the phone using its IMEI number.
 This will help to stop the usage of phone in that country, even if a SIM is changed.
 Visit the weblink http://www.numberingplans.com/?page=analysis&sub=imeinr to
check all information about your cell phone such as manufacturer, model type and
country of approval of a handset.
 Following are few antitheft software(s) available in the market:
1. GadgetTrak: http://www.gadgettrak.com/products/mobile/
2. Back2u: http://www.bak2u.com/phonebakmobilephone.php
3. Wavesecure: https://www.wavesecure.com/
4. F-Secure: http://www.f-secure.com/
15
Mobile Viruses
 A mobile virus is similar to a computer virus that targets mobile phone data or
applications/software installed in it.
 Virus attacks on mobile devices are no longer an exception or proof-of-concept
nowadays.
 In total, 40 mobile virus families and more than 300(+) mobile viruses have been
identified.
 First mobile virus was identified in 2004 and it was the beginning to understand that
mobile devices can act as vectors to enter the computer network.
 Mobile viruses get spread through two dominant communication protocols – Bluetooth
and MMS.
 Bluetooth virus can easily spread within a distance of 10–30 m, through Bluetooth-
activated phones
 MMS virus can send a copy of itself to all mobile users whose numbers are available in
the infected mobile phone’s address book.
 How to Protect from Mobile Malwares Attacks
Following are some tips to protect mobile from mobile malware attacks:
1. Download or accept programs and content (including ring tones, games, video clips and
photos) only from a trusted source.
2. If a mobile is equipped with Bluetooth, turn it OFF or set it to non-discoverable mode
when it is not in use and/or not required to use.
3. If a mobile is equipped with beam (i.e., IR), allow it to receive incoming beams, only from
the trusted source.
4. Download and install antivirus software for mobile devices.
Mishing
 Mishing is a combination of mobile and Phishing.
 Mishing attacks are attempted using mobile phone technology.
 M-Commerce is fast becoming a part of everyday life. If you use your mobile phone for
purchasing goods/services and for banking, you could be more vulnerable to a Mishing
scam.
 A typical Mishing attacker uses call termed as Vishing or message (SMS) known as
Smishing.
 Attacker will pretend to be an employee from your bank or another organization and will
claim a need for your personal details.
 Attackers are very creative and they would try to convince you with diferent reasons why
they need this information from you.
Vishing
 Vishing is the criminal practice of using social engineering over the telephone system,
most often using features facilitated by VoIP, to gain access to personal and financial
information from the public for the purpose of financial reward.
 The term is a combination of V – voice and Phishing.
 Vishing is usually used to steal credit card numbers or other related data used in ID theft
schemes from individuals.
 The most profitable uses of the information gained through a Vishing attack include:
1. ID theft; 2. purchasing luxury goods and services; 3. transferring money/funds;
4. monitoring the victims’ bank accounts; 5. making applications for loans and credit cards.
16
How Vishing Works

 The criminal can initiate a Vishing attack using a variety of methods, each of which
depends upon information gathered by a criminal and criminal’s will to reach a particular
audience.
1. Internet E-Mail: 2. Mobile text messaging:
3. Voicemail: 4. Direct phone call:
Following are the steps detailing on how direct phone call works:
• The criminal gathers cell/mobile phone numbers located and steals mobile phone numbers
after accessing cellular company.
• The criminal often uses a dialer to call phone numbers of people from a specific region, and
that to from the gathered list of phone numbers.
• When the victim answers the call, an automated recorded message is played to alert the
victim that his/her credit card has had fraudulent activity and/or his/her bank account has had
unusual activity.
The message instructs the victim to call one phone number immediately.
The same phone number is often displayed in the spoofed caller ID, under the name of the
financial company the criminal is pretending to represent.
• When the victim calls on the provided number, he/she is given automated instructions to
enter his/her credit card number or bank account details with the help of phone keypad.
• Once the victim enters these details, the criminal (i.e., visher) has the necessary information
to make fraudulent use of the card or to access the account.
• Such calls are often used to gain additional details such as date of birth, credit card
expiration date, etc.
Some of the examples of vished calls, when victim calls on the provided number after
receiving phished E-Mail and/or after listening voicemail, are as follows:
1. Automated message: Thank you for calling (name of local bank). Your business is
important to us. To help you reach the correct representative and answer your query fully,
please press the appropriate number on your handset after listening to options.
• Press 1 if you need to check your banking details and live balance.
• Press 2 if you wish to transfer funds.
• Press 3 to unlock your online profile.
• Press 0 for any other query.
2. Regardless of what the victim enters (i.e., presses the key), the automated system prompts
him to authenticate himself: “The security of each customer is important to us. To proceed
further, we require that you authenticate your ID before proceeding. Please type your bank
account number, followed by the pound key.”
3. The victim enters his/her bank account number and hears the next prompt: “Thank you.
Now please type your date of birth, followed by the pound key. For example 01 January 1950
press 01011950.”
4. The caller enters his/her date of birth and again receives a prompt from the automated
system: “Thank you. Now please type your PIN, followed by the pound key.”
5. The caller enters his PIN and hears one last prompt from the system: “Thank you.
We will now transfer you to the appropriate representative.” At this stage, the phone call gets
disconnected, and the victim thinks there was something wrong with the telephone line; or
visher may redirect the victim to the real customer service line, and the victim will not be
able to know at all that his authentication was appropriated by the visher.
17
How to Protect from Vishing Attacks
Following are some tips to protect oneself from Vishing attacks:

1. Be suspicious about all unknown callers.
2. Do not trust caller ID. It does not guarantee whether the call is really coming from that
number, that is, from the individual and/or company – caller ID Spoofing is easy.
3. Be aware and ask questions, in case someone is asking for your personal or financial
information.
4. Call them back. If someone is asking you for your personal or financial information, tell
them that you will call them back immediately to verify if the company is legitimate or not.
In case someone is calling from a bank and/or credit card company, call them back using a
number displayed on invoice and/or displayed on website.
5. Report incidents: Report Vishing calls to the nearest cyberpolice cell with the number and
name that appeared on the caller ID as well as the time of day and the information talked
about or heard in a recorded message.
Smishing
 Smishing is a criminal offense conducted by using social engineering techniques similar
to Phishing.
 The name is derived from “SMS PhISHING.”
 SMS can be abused by using different methods and techniques other than information
gathering under cybercrime.
 Smishing uses cell phone text messages to deliver a lure message to get the victim to
reveal his/her PI.
 The popular technique to “hook” (method used to actually “capture” your information)
the victim is either provide a phone number to force the victim to call or provide a
website URL to force the victim to access the URL, wherein, the victim gets connected
with bogus website (i.e., duplicate but fake site created by the criminal) and submits
his/her PI.
 Smishing works in the similar pattern as Vishing.
How to Protect from Smishing Attacks
Following are some tips to protect oneself from Smishing attacks:

1. Do not answer a text message that you have received asking for your PI. Even if the
message seems to be received from your best friend, do not respond, because he/she may not
be the one who has actually sent it.
2. Avoid calling any phone numbers, as mentioned in the received message, to cancel a
membership and/or confirming a transaction which you have not initiated but mentioned in
the message. Always call on the numbers displayed on the invoice and/or appearing in
the bank statements/passbook.
3. Never click on a hot link received through message on your Smartphone or PDA. Hot
links are links that you can click, which will take you directly to the Internet sites.
Smishing messages may have hot links, wherein you click on the link and download Spyware
to your phone without knowing. Once this software has been downloaded, criminals can
easily steal any information that is available on your cell phone and have access to everything
that you do on your cell phone.
18
Hacking Bluetooth
 Bluetooth is an open wireless technology standard used for communication (i.e.,
exchanging data) over short distances (i.e., using short length radio waves) between fixed
and/or mobile device.
 Bluetooth is a short-range wireless communication service/technology that uses the 2.4-
GHz frequency range for its transmission/communication.
 The older standard – Bluetooth 1.0 has a maximum transfer speed of 1 Mbps (megabit per
second) compared with 3 Mbps by Bluetooth 2.0.
 When Bluetooth is enabled on a device, it essentially broadcasts “I’m here, and I’m able
to connect” to any other Bluetooth-based device within range.
 This makes Bluetooth use simple and straightforward, and it also makes easier to identify
the target for attackers.
 The attacker installs special software [Bluetooth hacking tools] on a laptop and then
installs a Bluetooth antenna.
 Whenever an attacker moves around public places, the software installed on laptop
constantly scans the nearby surroundings of the hacker for active Bluetooth connections.
Once the software tool used by the attacker finds and connects to a vulnerable Bluetooth-
enabled cell phone, it can do things like download address book information, photos,
calendars, SIM card details, make long-distance phone calls using the hacked device, bug
phone calls and much more.
Table 3.1 | Bluetooth hacking tools

1. BlueScanner: This tool enables to search for Bluetooth enable device and will try to
extract as much information as possible for each newly discovered device after
connecting it with the target.
2. BlueSniff: This is a GUI-based utility for fi nding discoverable and hidden Bluetooth
enabled devices.
3. BlueBugger: The buggers exploit the vulnerability of the device and access the images,
phonebook, messages and other personal information.
4. Bluesnarfer: If a Bluetooth of a device is switched ON, then Bluesnarfing makes it
possible to connect to the phone without alerting the owner and to gain access to
restricted portions of the stored data.
5. BlueDiving: Bluediving is testing Bluetooth penetration. It implements attacks like
Bluebug and BlueSnarf.
Bluejacking, Bluesnarfing, Bluebugging and Car Whisperer are common attacks that have
emerged as Bluetooth-specific security issues.
1. Bluejacking: It means Bluetooth + Jacking where Jacking is short name for hijack – act of
taking over something. Bluejacking is sending unsolicited messages over Bluetooth to
Bluetooth-enabled devices such as mobile phones, PDAs or computers (within 10-m radius),
Bluejacking is harmless, as bluejacked users generally do not understand what has happened
and hence they may think that their phone is malfunctioning.
2. Bluesnarfing: It is the unauthorized access from a wireless device through a Bluetooth
connection between cell phones, PDAs and computers. This enables the attacker to access a
calendar, contact list, SMS and E-Mails as well as enable attackers to copy pictures and
private videos.
19
3. Bluebugging: It allows attackers to remotely access a user’s phone and use its features
without user’s attention.
4. Car Whisperer: It is a piece of software that allows attackers to send audio to and receive
audio from a Bluetooth-enabled car stereo.
Among the four above-mentioned attacks, Bluesnarfing is claimed to be much more

serious than Bluejacking.
These vulnerabilities are an inevitable result of technological innovation, and device
manufacturers’ continuously research and release firmware upgrades to address new
challenges/problems as they arise.
“Bluetooth and Bluetooth Security” is a separate subject in itself. Readers may visit the
following
websites to explore more on this topic:
• https://www.bluetooth.org/apps/content/
• http://www.bluetooth.com/English/Pages/default.aspx
• http://www.bluetoothhack.info/
Mobile Devices: Security Implications for Organizations

Managing Diversity and Proliferation of Hand-Held Devices
 Cybersecurity is always a primary concern to Most organizations
 Most organizations fail to see the long-term significance of keeping track of who owns
what kind of mobile devices.
 Mobile devices of employees should be registered to the organization.
 When an employee leaves, it is important to remove logical and physical access to
organization networks.
 Thus, mobile devices that belong to the company should be returned to the IT department
and, at the very least, should be deactivated and cleansed.
Unconventional/Stealth Storage Devices

 Compact disks (CDs) and Universal Serial Bus (USB) drives (also called zip drive,
memory sticks) used by employees are the key factors for cyber attacks.
 As the technology is advancing, the devices continue to decrease in size and emerge in
new shapes and sizes –storage devices available nowadays are difficult to detect and have
become a prime challenge for organizational security.
 It is advisable to prohibit the employees in using these devices.
 Not only can viruses, worms and Trojans get into the organization network, but can also
destroy valuable data in the organization network.
 Organization has to have a policy in place to block these ports while issuing the asset to
the employee.
 Employees can connect a USB/small digital camera/MP3 player to the USB port of any
unattended computer and will be able to download confidential data or upload harmful
viruses.
 As the malicious attack is launched from within the organization, firewalls and antivirus
software are not alerted.
 Using “DeviceLock” software solution, one can have control over unauthorized access to
plug and play devices (for more details, visit http://www.devicelock.com/).
20
 The features of the software allows system administrator to:

1. Monitor which users or groups can access USB Ports, Wi-Fi and Bluetooth adapters,
CD read-only memories (CD-ROMs) and other removable devices.
2. Control the access to devices depending on the time of the day and day of the week.
3. Create the white list of USB devices which allows you to authorize only specific
devices that will not be locked regardless of any other settings.
4. Set devices in read-only mode.
5. Protect disks from accidental or intentional formatting.
Threats through Lost and Stolen Devices

 This is a new emerging issue for cybersecurity.
 Often mobile hand-held devices are lost while people are on the move.
 Lost mobile devices are becoming even a larger security risk to corporations.
 A report based on a survey of London’s 24,000 licensed cab drivers quotes that 2,900
laptops, 1,300 PDAs and over 62,000 mobile phones were left in London in cabs in the
year 2001 over the last 6-month period.
 Today this figure (lost mobile devices) could be far larger given the greatly increased
sales and usage of mobile devices.
 The cybersecurity threat under this scenario is scary; owing to a general lack of security
in mobile devices, it is often not the value of the hand-held device that is important but
rather the content that, if lost or stolen, can put a company at a serious risk of
sabotage, exploitation or damage to its professional integrity, as most of the times the
mobile hand-held devices are provided by the organization.
 Most of these lost devices have wireless access to a corporate network and have
potentially very little security, making them a weak link and a major headache for
security administrators.
Protecting Data on Lost Devices

 There are two reasons why cybersecurity needs to protect the data when device is lost :
1. data that are persistently stored on the device and
2. always running applications.
 For protecting data, there are two precautions to prevent disclosure of the data stored on a
mobile device:
1. encrypting sensitive data and
2. encrypting the entire file system.
Organizational Measures for Handling Mobile

Encrypting Organizational Databases
 Critical and sensitive data reside on databases and with the advances in technology,
access to these data is possible through mobiles.
 Through encryption we can protect organization data.
 Two algorithms that are typically used to implement strong encryption of database files:
Rijndael (pronounced rain-dahl or Rhine-doll), a block encryption algorithm, chosen as
the new Advanced Encryption Standard (AES) for block ciphers by the National
Institute of Standards and Technology (NIST).
 The other algorithm used to implement strong encryption of database files is the Multi-
Dimensional Space Rotation (MDSR) algorithm developed by Casio.
21
 The term “strong encryption” is used here to describe these technologies in contrast to the
simple encryption.
 Strong encryption means that it is much harder to break, but it also has a significant
impact on performance.
Including Mobile Devices in Security Strategy

 Organizational IT departments will have to take the accountability for cybersecurity
threats that come through inappropriate access to organizational data from mobile-
device–user employees.
 Encryption of corporate databases is not the end of everything.
 There are technologies available to properly secure mobile devices.
 For example, there are ways to make devices lock or destroy the lost data by sending the
machine a special message.
 Also, some mobile devices have high-powered processors that will support 128-bit
encryption.
 A few things that organization can use are:
1. Implement strong asset management, virus checking, loss prevention and other controls for
mobile systems that will prohibit unauthorized access and the entry of corrupted data.
2. Investigate alternatives that allow a secure access to the company information through a
firewall, such as mobile VPNs.
3. Develop a system of more frequent and thorough security audits for mobile devices.
4. Incorporate security awareness into your mobile training and support programs so that
everyone understands just how important an issue security is within a company’s overall IT
strategy.
5. Notify the appropriate law-enforcement agency and change passwords. User accounts are
closely monitored for any unusual activity for a period of time.
Organizational Security Policies and Measures in Mobile Computing Era

Importance of Security Policies relating to Mobile Computing Devices
 Growth of mobile devices used makes the cybersecurity issue harder than what we would
tend to think.
 People (especially, the youth) have grown so used to their mobiles that they are treating
them like wallets!
 For example, people are storing more types of confidential information on mobile
computing devices than their employers or they themselves know; they listen to music
using their hand-held devices
 One should think about not to keep credit card and bank account numbers, passwords,
confidential E-Mails and strategic information about organization.
 Imagine the business impact if mobile or laptop was lost or stolen, revealing sensitive
customer data such as credit reports, social security numbers (SSNs) and contact
information.
Operating Guidelines for Implementing Mobile Device Security Policies

 Through the following steps we can reduce the risk when mobile device lost or stolen
1. Determine whether the employees in the organization need to use mobile computing
devices or not.
2. Implement additional security technologies like strong encryption, device passwords and
physical locks.
22
3. Standardize the mobile computing devices and the associated security tools being used
with them.
4. Develop a specific framework for using mobile computing devices.
5. Maintain an inventory so that you know who is using what kinds of devices.
6. Establish patching procedures for software on mobile devices.
7. Label the devices and register them with a suitable service.
8. Establish procedures to disable remote access for any mobile.
9. Remove data from computing devices that are not in use
10. Provide education and awareness training to personnel using mobile devices.
Organizational Policies for the Use of Mobile Hand-Held Devices

 There are many ways to handle the matter of creating policy for mobile devices.
 One way is creating a distinct mobile computing policy.
 Another way is including such devices under existing policy.

Laptops
 Laptops, like other mobile devices, enhance the business functions.
 Their mobile access to information anytime and anywhere, they also pose a large threat as
they are portable.
 Wireless capability in these devices has also raised cybersecurity concerns when the
information being transmitted over other, which makes it hard to detect.
 The thefts of laptops have always been a major issue, according to the cybersecurity
industry and insurance company statistics.
 Cybercriminals are targeting laptops that are expensive, to enable them to fetch a quick
profit in the black market.
 Most laptops contain personal and corporate information that could be sensitive.
 Such information can be misused if found by a malicious user.
 The following section provides some countermeasures against the theft of laptops,
thereby avoiding cybersecurity exposures.
3.12.1 Physical Security Countermeasures

 Organizations are heavily dependent upon a mobile workforce with access to information,
no matter where they travel.
 However, this mobility is putting organizations at risk of having a data breach
(Violation) if a laptop containing sensitive information is lost or stolen.
 Hence, physical security is very important to protect the information on the employees’
laptops.
 Physical security countermeasures are as follows.
1. Cables and hardwired locks: The most cost-efficient and ideal solution to safeguard any
mobile device is securing with cables and locks, specially designed for laptops.
2. Laptop safes: Safes made of polycarbonate – the same material that is used in bulletproof
windows, police riot shields and bank security screens – can be used to carry and safeguard
the laptops
3. Motion sensors and alarms: Alarms and motion sensors are very efficient in securing
laptops.
4. Warning labels and stamps: Warning labels containing tracking information and
identification details can be fixed onto the laptop to deter aspiring thieves. These labels
cannot be removed easily and are a low-cost solution to a laptop theft.
1
5. Other measures for Protecting laptops are as follows:
• keeping the laptop close to oneself wherever possible;
• carrying the laptop in a different and unobvious bag
• creating the awareness among the employees about the sensitive information contained inthe
laptop;
• making a copy of the purchase receipt of laptop
• installing encryption software to protect information stored on the laptop;
• using personal firewall software to block unwanted access and intrusion;
• updating the antivirus software regularly;
• tight office security using security guards and securing the laptop by locking it down in
lockers when not in use;
• never leaving the laptop unattended in public places
• disabling IR ports and wireless cards when not in use.
• Choosing a secure OS
• Registering the laptop with the laptop manufacturer to track down the laptop in case of
theft.
• Disabling unnecessary user accounts and renaming the administrator account.
• Backing up data on a regular basis.
A few logical access controls are as follows:
1. Protecting from malicious programs/attackers/social engineering.
2. Avoiding weak passwords/open access.
3. Monitoring application security and scanning for vulnerabilities.
4. Ensuring that unencrypted data/unprotected fi le systems do not pose threats.
5. Proper handling of removable drives/storage mediums/unnecessary ports.
6. Password protection through appropriate passwords rules and use of strong passwords.
7. Locking down unwanted ports/devices.
8. Regularly installing security patches and updates.
9. Installing antivirus software/firewalls/intrusion detection system (IDSs).
10. Encrypting critical file systems.
11. Other countermeasures:
Box 3.13 | Spy Phone Software!!!

Spy Phone software is installed on the mobile/cell phone of employees, if the employers
wants to monitor phone usage. The Spy Phone software is completely hidden from the user,
once it is installed and collects all the available data such as SMS messages, ingoing/outgoing
call history, location tracking, GPRS usage and uploads the collected data to a remote server.
The employer can simply access the designated website hosted by Spy Phone vendor, and
after entering his/her account details, he/she can have full access to all the data collected 24
hours a day, 7 days a week. The employer can access this website through the Internet; hence,
he/she can keep an eye on their employees, regardless where he/she is in the world. The
employer can read all SMS messages (both incoming and outgoing), know who they
(employees) are calling or who is calling them and where they were when the call was
received.
Following are few Spy Phone Software(s) available in the market:
1. SpyPhonePlus: http://www.spyphoneplus.com/
2. FlexiSpy: http://www.flexispy.com/
3. TheSpyPhone: http://www.thespyphone.com/spyphone.html
4. Mobile Spy: http://www.mobile-spy.com/
Preapared by:Suraj B S
2
Tools and Methods Used in Cybercrime

1. Introduction
2. Proxy Servers and Anonymizers,
3. Phishing
4. Password Cracking
5. Key loggers and Spywares
6. Virus and Worms
7. Trojan Horses and Backdoors
8. Steganography
9. DoS and DDoS Attacks
10. SQL Injection
11. Buffer Overflow
12. Attacks on Wireless Networks
3
Introduction
 Different forms of attacks through which attackers target the computer systems are as follows
1. Initial uncovering:
Two steps are involved here.
 In the first step called as reconnaissance, the attacker gathers information about the target on
the Internet websites.
 In the second step, the attacker finds the company’s internal network, such as, Internet
domain, machine names and the company’s Internet Protocol (IP) address ranges to steal the
data.
2. Network probe (investigation) :

 At the network probe stage, the attacker scans the organization information through a “ping
sweep” of the network IP addresses.
 And then a “port scanning” tool is used to discover exactly which services are running on the
target system.
 At this point, the attacker has still not done anything that would be considered as an
abnormal activity on the network or anything that can be classified as an intrusion.
3. Crossing the line toward electronic crime (E-crime):

 Once the attackers are able to access a user account, then they will attempt further exploits to
get an administrator or “root” access.
 Root access is a UNIX term and is associated with the system privileges required to run all
services and access all files on the system (readers are expected to have a basic familiarity
with Unix-based systems).
 “Root” is basically an administrator or super-user access and grants them the privileges to do
anything on the system.
4. Capturing the network:

 At this stage, the attacker attempts to “own” the network.
 The attacker gains the internal network quickly and easily by target systems.
 The next step is to remove any evidence of the attack.
 The attacker will usually install a set of tools that replace existing files and services with
Trojan files and services that have a backdoor password.
5. Grab the data:

 Now that the attacker has “captured the network,” he/she takes advantage of his/her position
to steal confidential data
6. Covering tracks:
 This is the last step in any cyberattack, which refers to the activities undertaken by the
attacker to extend misuse of the system without being detected.
 The attacker can remain undetected for long periods.
 During this entire process, the attacker takes optimum care to hide his/her identity (ID) from
the first step itself.
4
Proxy Servers and Anonymizers

 Proxy server is a computer on a network which acts as an intermediary for
connections with other computers on that network.
 The attacker first connects to a proxy server and establishes a connection with the target
system through existing connection with proxy.
 This enables an attacker to surf on the Web anonymously and/or hide the attack.
 A client connects to the proxy server and requests some services (such as a file, webpage)
available from a different server.
 The proxy server evaluates the request and provides the resource by establishing the
connection to the respective server and/or requests the required service on behalf of the
client.
 Using a proxy server can allow an attacker to hide ID (i.e., become anonymous on the
network).
A proxy server has following purposes:
1. Keep the systems behind the curtain (mainly for security reasons).
2. Speed up access to a resource (through “caching”). It is usually used to cache the webpages
from a web server.
3. Specialized proxy servers are used to filter unwanted content such as advertisements.
4. Proxy server can be used as IP address multiplexer to enable to connect number of computers
on the Internet, whenever one has only one IP address
 One of the advantages of a proxy server is that its cache memory can serve all users.
 If one or more websites are requested frequently, may be by different users, it is likely to be
in the proxy’s cache memory, which will improve user response time.
 An anonymizer or an anonymous proxy is a tool that attempts to make activity on the Internet
untraceable. It accesses the Internet on the user’s behalf, protecting personal information by
hiding the source computer’s identifying information.
 Anonymizers are services used to make Web surfing anonymous by utilizing a website that
acts as a proxy server for the web client.
5
Phishing
 “Phishing” refers to an attack using mail programs to deceive Internet users into disclosing
confidential information that can be then exploited for illegal purposes.
 While checking electronic mail (E-Mail) one day a user finds a message from the bank
threatening to close the bank account if he/she does not reply immediately.
 Although the message seems to be suspicious from the contents of the message, it is difficult
to conclude that it is a fake/false E-Mail.
 This message and other such messages are examples of Phishing – in addition to stealing
personal and financial data – and can infect systems with viruses and also a method of online
ID theft in various cases.
 These messages look authentic and attempt to get users to reveal their personal information.
 It is believed that Phishing is an alternative spelling of “fishing,” as in “to fish for
information.”
 The first documented use of the word “Phishing” was in 1996.
How Phishing Works?

Phishers work in the following ways:
1. Planning: Criminals, usually called as phishers, decide the target.
2. Setup: Once phishers know which business/business house to spoof and who their victims.
3. Attack: the phisher sends a phony message that appears to be from a reputable source.
4. Collection: Phishers record the information of victims entering into webpages or pop-up
windows.
5. Identity theft and fraud: Phishers use the information that they have gathered to make illegal
purchases or commit fraud.
Nowadays, more and more organizations/institutes provide greater online access for their customers
and hence criminals are successfully using Phishing techniques to steal personal information and
conduct ID theft at a global level.
6
Password Cracking
 Password is like a key to get an entry into computerized systems like a lock.
 Password cracking is a process of recovering passwords from data that have been stored in or
transmitted by a computer system.
 Usually, an attacker follows a common approach – repeatedly making guesses for the
password.
The purpose of password cracking is as follows:
1. To recover a forgotten password.
2. As a preventive measure by system administrators to check for easily crackable passwords.
3. To gain unauthorized access to a system.
Manual password cracking is to attempt to logon with different passwords. The attacker followsthe
following
steps:
1. Find a valid user account such as an Administrator or Guest;
2. create a list of possible passwords;
3. rank the passwords from high to low probability;
4. key-in each password;
5. try again until a successful password is found.
Passwords can be guessed sometimes with knowledge of the user’s personal information.Examples of
guessable passwords include:
1. Blank (none);
2. the words like “password,” “passcode” and “admin”;
3. series of letters from the “QWERTY” keyboard, for example, qwerty, asdf or qwertyuiop;
4. user’s name or login name;
5. name of user’s friend/relative/pet;
6. user’s birthplace or date of birth, or a relative’s or a friend’s;
7. user’s vehicle number, office number, residence number or mobile number;
8. name of a celebrity who is considered to be an idol (e.g., actors, actress, spiritual gurus) by the
user;
 An attacker can also create a script file (i.e., automated program) which will be executed to
try each password in a list.
 This is still considered manual cracking, is time-consuming and not usually effective.
 Passwords are stored in a database and password verification process is established into
the system when a user attempts to login or access a restricted resource.
 To ensure confidentiality of passwords, the password verification data is usually not
stored in a clear text format.
 For example, one-way function (which may be either an encryption function or a
cryptographic hash) is applied to the password, possibly in combination with other data, and
the resulting value is stored.
 When a user attempts to login to the system by entering the password, the same function is
applied to the entered value and the result is compared with the stored value. If they match,
user gains the access; this process is called authentication.
7
The most commonly used hash functions can be computed rapidly and the attacker can test these
hashes with the help of passwords cracking tools (see Table 4.3) to get the plain text password.
Password cracking attacks can be classified under three categories as follows:

1. Online attacks;
2. offline attacks;
3. non-electronic attacks (e.g., social engineering, shoulder surfing and dumpster diving).
Online Attacks
 An attacker can create a script file that will be executed to try each password in a list and
when matches, an attacker can gain the access to the system.
 The most popular online attack is man-in-the middle (MITM) attack, also termed as “bucket-
brigade attack” or sometimes “Janus attack.”
 It is a form of active stealing in which the attacker establishes a connection between a victim
and the server to which a victim is connected.
 When a victim client connects to the fraudulent server, the MITM server intercepts the call,
hashes the password and passes the connection to the victim server (e.g., an attacker within
reception range of an unencrypted Wi-Fi wireless access point can insert himself as a man-in-
the-middle).
 This type of attack is used to obtain the passwords for E-Mail accounts on public websites
such as Yahoo, Hotmail and Gmail and can also used to get the passwords for financial
websites that would like to gain the access to banking websites.
Offline Attacks
 Mostly offline attacks are performed from a location other than the target (i.e., either a
computer system or while on the network) where these passwords reside or are used.
 Offline attacks usually require physical access to the computer and copying the password file
from the system onto removable media.
Password guidelines.
1. Passwords used for business E-Mail accounts, personal E-Mail accounts and banking/financial
user accounts should be kept separate.
2. Passwords should be of minimum eight alphanumeric characters (common names or phrases
should be phrased).
3. Passwords should be changed every 30/45 days.
4. Passwords should not be shared with relatives and/or friends.
5. Password used previously should not be used while renewing the password.
6. Passwords of personal E-Mail accounts and banking/financial user accounts should be
changed from a secured system, within couple of days, if these E-Mail accounts has been
accessed from public Internet facilities such as cybercafes/hotels/libraries.
7. Passwords should not be stored under mobile phones/PDAs, as these devices are also prone to
cyberattacks.
8. In case E-Mail accounts/user accounts have been hacked, respective agencies/institutes should
be contacted immediately.
8
Keyloggers and Spywares

 Keystroke logging, often called keylogging, is the practice of noting (or logging) the keys
struck on a keyboard, typically in a covert manner so that the person using the keyboard is
unaware that such actions are being monitored.
 Keystroke logger or keylogger is quicker and easier way of capturing the passwords and
monitoring the victims’ IT savvy behavior. It can be classified as software keylogger and
hardware keylogger.
Software Keyloggers
 Software keyloggers are software programs installed on the computer systems which
usually are located between the OS and the keyboard hardware, and every keystroke is
recorded.
 Software keyloggers are installed on a computer system by Trojans or viruses without the
knowledge of the user.
 Cybercriminals always install such tools on the insecure computer systems available in
public places (i.e., cybercafés, etc) and can obtain the required information about the victim
very easily.
 A keylogger usually consists of two files that get installed in the same directory: a dynamic
link library (DLL) file and an EXEcutable (EXE) file that installs the DLL file and triggers it
to work. DLL does all the recording of keystrokes.
Some Important Keyloggers are as follows

All In One Keylogger Stealth Keylogger Perfect Keylogger
KGB Spy Spy Buddy Elite Keylogger
CyberSpy Powered Keylogger
Hardware Keyloggers
 Hardware keyloggers are small hardware devices.
 These are connected to the PC and/or to the keyboard and save every keystroke into a file or
in the memory of the hardware device.
 Cybercriminals install such devices on ATM machines to capture ATM Cards’ PINs.
 Each keypress on the keyboard of the ATM gets registered by these keyloggers.
 These keyloggers look like an integrated part of such systems; hence, bank customers are
unaware of their presence.
Antikeylogger
 Antikeylogger is a tool that can detect the keylogger installed on the computer system and
also can remove the tool. (Visit http://www.anti-keyloggers.com for more information)
Advantages of using antikeylogger are as follows:
1. Firewalls cannot detect the installations of keyloggers on the systems; hence, antikeyloggers
can detect installations of keylogger.
2. This software does not require regular updates of signature bases to work effectively such as
other antivirus and antispy programs; if not updated, it does not serve the purpose, which makes
the users at risk.
3. Prevents Internet banking frauds. Passwords can be easily gained with the help of installing
9
keyloggers.
4. It prevents ID theft (we will discuss it more in Chapter 5).
5. It secures E-Mail and instant messaging/chatting.
Spywares
 Spyware is a type of malware (i.e., malicious software) that is installed on computers which
collects information about users without their knowledge.
 The presence of Spyware is typically hidden from the user; it is secretly installed on the
user’s personal computer.
 Sometimes, however, Spywares such as keyloggers are installed by the owner
of a shared, corporate or public computer on purpose to secretly monitor other
users.
Some Important Spywares are as follows
Spy. Spector Pro. Spector Pro.
eBlaster. Remotespy . Stealth Recorder Pro.
Stealth Website Logger. Flexispy. Wiretap Professional.
PC PhoneHome. SpyArsenal Print Monitor Pro.
Box 4.3 | Malwares

Malware, short for malicious software, is a software designed to infiltrate a computer system
without the owner’s informed consent. The expression is a general term used by computer
professionals to mean a variety of forms of hostile, intrusive or annoying software or program
code. Malware can be classified as follows:
1. Viruses and worms: These are known as infectious malware. They spread from one computer
system to another with a particular behavior.
2. Trojan Horses: A Trojan Horse,[14] Trojan for short, is a term used to describe malware that
appears,to the user, to perform a desirable function but, in fact, facilitates unauthorized access to
the user’s computer system
3. Rootkits: Rootkits is a software system that consists of one or more programs designed to
obscurethe fact that a system has been compromised.
4. Backdoors: Backdoor[16] in a computer system (or cryptosystem or algorithm) is a method of
bypassing normal authentication, securing remote access to a computer, obtaining access to plain
text and so on while attempting to remain undetected.
5. Spyware:
6. Botnets:
7. Keystroke loggers:
9
Virus and Worms

 Computer virus is a program that can “infect” legitimate programs by modifying them to
include a possibly “evolved” copy of itself.
 Viruses spread themselves, without the knowledge or permission of the users, to potentially
large numbers of programs on many machines.
 A computer virus passes from computer to computer in a similar manner as a biological virus
passes from person to person.
 Viruses may also contain malicious instructions that may cause damage or annoyance; the
combination of possibly Malicious Code with the ability to spread is what makes viruses a
considerable concern.
 Viruses can often spread without any readily visible symptoms.
 A virus can start on event-driven effects (e.g., triggered after a specific number of
executions), time-driven effects (e.g., triggered on a specific date, such as Friday the 13th) or
can occur at random.
Viruses can take some typical actions:
1. Display a message to prompt an action which may set of the virus;
2. delete files inside the system into which viruses enter;
3. scramble data on a hard disk;
4. cause erratic screen behavior;
5. halt the system (PC);
6. just replicate themselves to propagate further harm.
10
 Computer virus has the ability to copy itself and infect the system.
 The term virus is also commonly but erroneously used to refer to other types of malware,
Adware and Spyware programs that do not have reproductive ability.
 A true virus can only spread from one system to another (in some form of executable code)
when its host is taken to the target computer; for instance, when a user sent it over the
Internet or a network, or carried it on a removable media such as CD, DVD or USB drives.
 Viruses can increase their chances of spreading to other systems by infecting files on a
network file system or a file system that is accessed by another system.
 Malware includes computer viruses, worms, Trojans, most Rootkits, Spyware, dishonest
Adware, crimeware and other malicious and unwanted software as well as true viruses.
 Viruses are sometimes confused with computer worms and Trojan Horses, which are
technically different (see Table 4.7 to understand the difference between computer virus and
worm).
 A worm spreads itself automatically to other computers through networks by exploiting
security vulnerabilities, whereas a Trojan is a code/program that appears to be harmless but
hides malicious functions.
 Worms and Trojans, such as viruses, may harm the system’s data or performance.
 Some viruses and other malware have noticeable symptoms that enable computer user to take
necessary corrective actions, but many viruses are surreptitious or simply do nothing for
user’s to take note of them.
 Some viruses do nothing beyond reproducing themselves.
Types of Viruses
1. Boot sector viruses: It infects the storage media on which OS is stored (e.g., hard drives) and
which is used to start the computer system.
2. Program viruses: These viruses become active when the program file (usually with
extensions .bin, .com,.exe, .ovl, .drv) is excuted
3. Multipartite viruses: It is a hybrid of a boot sector and program viruses. It infects program
files along with the boot record when the infected program is active.
11
4. Stealth viruses: It hides itself and so detecting this type of virus is very difficult. It can hiding
itself such a way that antivirus software also cannot detect it. Example for Stealth virus is “Brain
Virus”.
5. Polymorphic viruses: It acts like a “chameleon” that changes its virus signature (i.e., binary
pattern) every time it spreads through the system (i.e., multiplies and infects a new file). Hence,
it is always difficult to detect polymorphic virus with the help of an antivirus program.
6. Macro viruses: Many applications, such as Microsoft Word and Microsoft Excel, support
MACROs (i.e., macrolanguages). These macros are programmed as a macro embedded in a
document. Once macrovirus gets onto a victim’s computer then every document he/she produces
will become infected.
7. Active X and Java Control: All the web browsers have settings about Active X and Java
Controls.
World’s worst worm attacks.
Conficker INF/AutoRun Win32 PSW Win32/Agent
Win32/FlyStudio Win32/Pacex.Gen Win32/Qhost WMA/ TrojanDownloader
The world’s worst virus and worm attacks!!!
Morris Worm ILOVEYOU Nimda Jerusalem
Code Red Melissa MSBlast
Sobig Storm Worm Michelangelo
Trojan Horses and Backdoors

 Trojan Horse is a program in which malicious or harmful code is contained inside apparently
harmless programming or data in such a way that it can get control and cause harm, for
example, ruining the file allocation table on the hard disk.
 A Trojan Horse may get widely redistributed as part of a computer virus.
 The term Trojan Horse comes from Greek mythology about the Trojan War.
 Like Spyware and Adware, Trojans can get into the system in a number of ways, including
from a web browser, via E-Mail.
 It is possible that one could be forced to reformat USB flash drive or other portable device to
eliminate infection and avoid transferring it to other machines
 Unlike viruses or worms, Trojans do not replicate themselves but they can be equally
destructive.
 On the surface, Trojans appear benign and harmless, but once the infected code is executed,
Trojans kick in and perform malicious functions to harm the computer system without the
user’s knowledge.
 For example, waterfalls.scr is a waterfall screen saver as originally claimed by the author;
however, it can be associated with malware and become a Trojan to unload hidden programs
and allow unauthorized access to the user’s PC.
Some typical examples of threats by Trojans are as follows:

1. They erase, overwrite or corrupt data on a computer.
2. They help to spread other malware such as viruses (by a dropper Trojan).
3. They deactivate or interfere with antivirus and firewall programs.
4. They allow remote access to your computer (by a remote access Trojan).
5. They upload and download files without your knowledge.
12
6. They gather E-Mail addresses and use them for Spam.

7. They log keystrokes to steal information such as passwords and credit card numbers.
8. They copy fake links to false websites, display porno sites, play sounds/videos and display
images.
9. They slow down, restart or shutdown the system.
10. They reinstall themselves after being disabled.
11. They disable the task manager.
12. They disable the control panel.
Backdoor
 A backdoor is a means of access to a computer program that bypasses security mechanisms.
A programmer may sometimes install a backdoor so that the program can be accessed for
troubleshooting or other purposes.
 However, attackers often use backdoors that they detect or install themselves as part of an
exploit.
 In some cases, a worm is designed to take advantage of a backdoor created by an earlier
attack.
 A backdoor works in background and hides from the user.
 It is very similar to a virus and, therefore, is quite difficult to detect and completely disable.
 A backdoor is one of the most dangerous parasite, as it allows a malicious person to perform
any possible action on a compromised system.
Following are some functions of backdoor:

1. It allows an attacker to create, delete, rename, copy or edit any file, execute various
commands; change any system settings; alter the Windows registry; run, control and terminate
applications; install arbitrary software and parasites.
2. It allows an attacker to control computer hardware devices, modify related settings, shutdown
or restart a computer without asking for user permission.
3. It steals sensitive personal information, valuable documents, passwords, login names, ID
details; logs user activity and tracks web browsing habits.
4. It records keystrokes that a user types on a computer’s keyboard and captures screenshots.
5. It sends all gathered data to a predefined E-Mail address, uploads it to a predetermined FTP
server or transfers it through a background Internet connection to a remote host.
6. It infects files, corrupts installed applications and damages the entire system.
Following are a few examples of backdoor Trojans:
1. Back Orifice 2. Bifrost: 3. SAP backdoors 4. Onapsis Bizploit:
Follow the following steps to protect your systems from Trojan Horses and
backdoors:
1. Stay away from suspect websites/weblinks:
2. Surf on the Web cautiously:
3. Install antivirus/Trojan remover software:
13
Steganography
 Steganography is the practice of concealing (hiding) a file, message, image, or video within
another file, message, image, or video. The word steganography combines
the Greek words steganos , meaning "covered, concealed, or protected", and graphein
meaning "writing".
 It is a method that attempts to hide the existence of a message or communication.
 Steganography is always misunderstood with cryptography
 The different names for steganography are data hiding, information hiding and digital
watermarking.
 Steganography can be used to make a digital watermark to detect illegal copying of digital
images. Thus, it aids confidentiality and integrity of the data.
 Digital watermarking is the process of possibly irreversibly embedding information into a
digital signal.
 The Digital signal may be, for example, audio, pictures or video.
 If the signal is copied then the information is also carried in the copy.
 In other words, when steganography is used to place a hidden “trademark” in images, music
and software, the result is a technique referred to as “watermarking”
Steganalysis
 Steganalysis is the art and science of detecting messages that are hidden in images,
audio/video files using steganography.
 The goal of steganalysis is to identify suspected packages and to determine whether or not
they have a payload encoded into them, and if possible recover it.
 Automated tools are used to detect such steganographed data/information hidden in the
image and audio and/or video files.

Box 4.7 | Difference between Steganography and Cryptography
Steganography is the art and science of writing hidden messages in such a way that no one apart
from the intended recipient knows the existence of the message; this is in contrast to
cryptography, of the message itself is not disguised, but the content is obscured. It is said that
terrorists use where the existence steganography techniques to hide their communication in
images on the Internet; most popular images are used such as those of fi lm actresses or other
celebrities. In its basic form, steganography is simple.
14
DoS and DDoS Attacks

 A denial-of-service attack (DoS attack) or distributed denial-of-service attack (DDoS attack)
is an attempt to make a computer resource (i.e., information systems) unavailable to its
intended users.
DoS Attacks
 In this type of criminal act, the attacker floods the bandwidth of the victim’s network or
fills his E-Mail box with Spam mail depriving him of the services he is entitled to access or
provide.
 The attackers typically target sites or services hosted on high-profile web servers such
as banks, credit card payment gateways, mobile phone networks and even root name servers
 Buffer overflow technique is employed to commit such kind of criminal attack known as
Spoofing.
 The term IP address Spoofing refers to the creation of IP packets with a forged (spoofed)
source IP address with the purpose of concealing the ID of the sender or impersonating
another computing system.
 A packet is a formatted unit of data carried by a packet mode computer network.
 The attacker spoofs the IP address and floods the network of the victim with repeated
requests.
 As the IP address is fake, the victim machine keeps waiting for response from the attacker’s
machine for each request.
 This consumes the bandwidth of the network which then fails to serve the legitimate requests
and ultimately breaks down.
 The United States Computer Emergency Response Team defines symptoms of DoS attacks to
include:
1. Unusually slow network performance (opening fi les or accessing websites);
2. unavailability of a particular website;
3. inability to access any website;
4. dramatic increase in the number of Spam E-Mails received (this type of DoS attack is termed
as an E-Mail bomb).
The goal of DoS is not to gain unauthorized access to systems or data, but to prevent intended
users (i.e., legitimate users) of a service from using it.
A DoS attack may do the following:
1. Flood a network with traffic, thereby preventing legitimate network traffic.
2. Disrupt connections between two systems, thereby preventing access to a service.
3. Prevent a particular individual from accessing a service.
4. Disrupt service to a specific system or person.
Classification of DoS Attacks

1 Bandwidth attacks: Loading any website takes certain time. Loading means complete
webpage appearing on the screen and system is awaiting user’s input.
2 Logic attacks: These kind of attacks can exploit vulnerabilities in network software such as
web server or TCP/IP stack.
3 Protocol attacks: Protocols here are rules that are to be followed to send data over network.
4 Unintentional DoS attack : This is a scenario where a website ends up denied not due to a
attack by a single individual or group of individuals, but simply due to a sudden enormous spike
in popularity.
15
Types or Levels of DoS Attacks

There are several types or levels of DoS attacks as follows:
1. Flood attack: This is the earliest form of DoS attack and is also known as ping food. It is
based on an attacker simply sending the victim overwhelming number of ping packets, usually
by using the “ping” command, which result into more traffic than the victim can handle.
2. Ping of death attack: The ping of death attack sends oversized Internet Control Message
Protocol (ICMP) packets, and it is one of the core protocols of the IP Suite. It is mainly used by
networked computers’ OSs to send error messages indicating (e.g., that a requested service is not
available or that a host or router could not be reached) datagrams (encapsulated in IP packets) to
the victim.
3. SYN attack: It is also termed as TCP SYN Flooding. In the TCP, handshaking of network
connections is done with SYN and ACK messages.
 An attacker initiates a TCP connection to the server with an SYN.
 The server replies with an SYN-ACK.
 The client then does not send back an ACK, causing the server to allocate memory for the
pending connection and wait.
 This fills up the buffer space for SYN messages on the target system, preventing other
systems on the network from communicating with the target system.
4. Teardrop attack: The teardrop attack is an attack where fragmented packets are forged to
overlap each other when the receiving host tries to reassemble them. IP’s packet
fragmentation algorithm is used to send corrupted packets to confuse the victim and may hang
the system. Th is attack can crash various OSs due to a bug in their TCP/IP fragmentation
reassembly code.
5. Smurf attack: This is a type of DoS attack that floods a target system via spoofed
broadcast ping messages. This attack consists of a host sending an echo request (ping) to a
network broadcast address.
6. Nuke: Nuke is an old DoS attack against computer networks consisting of fragmented or
invalid packets sent to the target.
Tools Used to Launch DoS Attack

1 Jolt2 : The vulnerability allows remote attackers to cause a DoS attack against Windows-based
machines – the attack causes the target machine to consume of the CPU time on processing of
illegal packets.
2 Nemesy : This program generates random packets of spoofed source IP to enable the attacker
to launch DoS attack.
3 Targa : It is a program that can be used to run eight diff erent DoS attacks. Th e attacker has
the option to launch either individual attacks or try all the attacks until one is successful.
4 Crazy Pinger : This tool could send large packets of ICMP(Internet Control Message Protocol) to a
remote target network.
5 SomeTrouble: It is a remote flooder and bomber. It is developed in Delphi.
16
DDoS Attacks
 In a DDoS attack, an attacker may use your computer to attack another computer.
 By taking advantage of security vulnerabilities or weaknesses, an attacker could take control
of your computer.
 He/she could then force your computer to send huge amounts of data to a website or send
Spam to particular E-Mail addresses.
 The attack is “distributed” because the attacker is using multiple computers, including yours,
to launch the DoS attack.
 A DDoS attack is a distributed DoS wherein a large number of zombie systems are
synchronized to attack a particular system.
 The zombie systems are called “secondary victims” and the main target is called “primary
victim.”
 Malware can carry DDoS attack mechanisms – one of the better-known examples of this is
MyDoom.
 Botnet is the popular medium to launch DoS/DDoS attacks.
 Attackers can also break into systems using automated tools that exploit flaws in programs
that listen for connections from remote hosts.
How to Protect from DoS/DDoS Attacks

Computer Emergency Response Team Coordination Center (CERT/CC) offers many preventive
measures from being a victim of DoS attack.[33]
1. Implement router filters. This will lessen your exposure to certain DoS attacks.
2. If such filters are available for your system, install patches to guard against TCP SYN
flooding.
3. Disable any unused or inessential network service.
4. Enable quota systems on your OS if they are available.
5. Observe your system’s performance and establish baselines for ordinary activity.
6. Routinely examine your physical security with regard to your current needs.
7. Use Tripwire or a similar tool to detect changes in configuration information or other files.
8. Invest in and maintain “hot spares” – machines that can be placed into service quickly if a
similar machine is disabled.
9. Invest in redundant and fault-tolerant network configurations.
10. Establish and maintain regular backup schedules
11. Establish and maintain appropriate password policies
17
SQL Injection
 Structured Query Language (SQL) is a database computer language designed for managing
data in relational database management systems (RDBMS).
 SQL injection is a code injection technique that exploits a security vulnerability occurring in
the database layer of an application.
 SQL injection attacks are also known as SQL insertion attacks.
 Attackers target the SQL servers – common database servers used by many organizations to
store confidential data.
 The prime objective behind SQL injection attack is to obtain the information while accessing
a database table that may contain personal information such as credit card numbers, social
security numbers or passwords.
 During an SQL injection attack, Malicious Code is inserted into a web form field or the
website’s code.
 For example, when a user logs in with username and password, an SQL query is sent to the
database to check if a user has valid name and password.
 With SQL injection, it is possible for an attacker to send crafted username and/or password
field that will change the SQL query.
Steps for SQL Injection Attack

Following are some steps for SQL injection attack:
1. The attacker looks for the webpages that allow submitting data, that is, login page, search
page, feedback, etc. The attacker also looks for the webpages that display the HTML commands
such as POST or GET by checking the site’s source code.
2. To check the source code of any website, right click on the webpage and click on “view
source” – source code is displayed in the notepad. The attacker checks the source code of the
HTML, and look for “FORM” tag in the HTML code.
Everything between the <FORM> and </FORM> have potential parameters that might be usefulto
find the vulnerabilities.
<FORM action=Search/search.asp method=post>
<input type=hidden name=A value=C>
</FORM>
3. The attacker inputs a single quote under the text box provided on the webpage to accept the
username and password. This checks whether the user-input variable is interpreted literally by
the server. If the response is an error message such as use “a” = “a” then the website is found
to be susceptible to an SQL injection attack.
4. The attacker uses SQL commands such as SELECT statement command to retrieve data from
the database or INSERT statement to add information to the database.
Here are few examples of variable field text the attacker uses on a webpage to test for SQL
vulnerabilities:
1. Blah’ or 1=1--
2. Login:blah’ or 1=1--
3. Password::blah’ or 1=1--
4. http://search/index.asp?id=blah’ or 1=1--
18
Similar SQL commands may allow bypassing of a login and may return many rows in a table or
even an entire database table because the SQL server is interpreting the terms literally. The
double dashes near the end of the command tell SQL to ignore the rest of the command as a
comment.
Blind SQL Injection

 Blind SQL injection is used when a web application is vulnerable to an SQL injection but the
results of the injection are not visible to the attacker.
 The page with the vulnerability may not be the one that displays data; however, it will
display differently depending on the results of a logical statement injected into the legitimate
SQL statement called for that page.
 This type of attack can become time-intensive because a new statement must be crafted for
each bit recovered.
 There are several tools that can automate these attacks once the location of the vulnerability
and the target information have been established.
How to Prevent SQL Injection Attacks

SQL injection attacks occur due to poor website administration and coding. The following steps can
be taken to prevent SQL injection.
1. Input validation
• Replace all single quotes to two single quotes.
• Sanitize the input: User input needs to be checked and cleaned of any characters or strings that
could possibly be used maliciously. For example, character sequences such as ; , --, select, insert
and xp_ can be used to perform an SQL injection attack.
• Numeric values should be checked while accepting a query string value. Function –
IsNumeric() for Active Server Pages (ASP) should be used to check these numeric values.
• Keep all text boxes and form fields as short as possible to limit the length of user input.
2. Modify error reports: SQL errors should not be displayed to outside users
3. Other preventions
• The default system accounts for SQL server 2000 should never be used.
• Isolate database server and web server.
19
Buffer Overflow
 Buffer overflow, or buffer overrun, is an anomaly where a process stores data in a buffer
outside the memory the programmer has set aside for it.
 This may result unreliable program behavior, including memory access errors, incorrect
results, program termination (a crash) or a breach of system security.
 Buffer overflows can be triggered by inputs that are designed to execute code or alter the way
the program operates.
 They are, thus, the basis of many software vulnerabilities and can be maliciously exploited.
Bounds checking can prevent buffer overflows.
 Programming languages commonly associated with buffer overflows include C and C++,
which provide no built-in protection against accessing or overwriting data in any part of
memory and do not automatically check that data written to an array.
 Buffer overflow occurs when a program or process tries to store more data in a buffer
(temporary data storage area) than it was intended to hold.
 Although it may occur accidentally through programming error, buffer overflow is an
increasingly common type of security attack on data integrity.
 The knowledge of C, C++ or any other high-level computer language (i.e., assembly
language) is essential to understand buffer overflow.
For example,
int main () {
int buffer[10];
buffer[20] = 10;
}
 This C program is a valid program and every compiler can compile it without any errors.
 However, the program attempts to write beyond the allocated memory for the buffer, which
might result in an unexpected behavior.
Types of Buffer Overflow

Stack-Based Buffer Overflow
Stack buffer overflow occurs when a program writes to a memory address on the program’s call
stack outside the intended data structure – usually a fixed length buffer. Here are the
characteristics of stack-based programming:
1. “Stack” is a memory space in which automatic variables (and often function parameters) are
allocated.
2. Function parameters are allocated on the stack and are not automatically initialized by the
system, so they usually have garbage in them until they are initialized.
3. Once a function has completed its cycle, the reference to the variable in the stack is removed.
The attacker may exploit stack-based buffer overflows to manipulate the program in various
ways by overwriting:
1. A local variable that is near the buffer in memory on the stack to change the behavior of the
program that may benefit the attacker.
2. The return address in a stack frame. Once the function returns, execution will resume at the
return address as specified by the attacker, usually a user input-filled buffer.
3. A function pointer, or exception handler, which is subsequently executed.
20
The factors that contribute to overcome the exploits are

1. Null bytes in addresses;
2. Variability in the location of shell code;
3. Differences between environments.
A shell code is a small piece of code used as a payload in the exploitation of softwarevulnerability.
It is called “shell code” because it starts with command shell from which the attacker can controlthe
compromised machine.
NOPs
NOP or NOOP (short form of no operation) is an assembly language instruction/ command that
effectively does nothing at all.
Heap Buffer Overflow
Heap buffer overflow occurs in the heap data area and may be introduced accidentally by an
application programmer, or it may result from a deliberate exploit. The characteristics of stack-
based and heap-based programming are as follows:
1. “Heap” is a “free store” that is a memory space, where dynamic objects are allocated.
2. The heap is the memory space that is dynamically allocated new(), malloc() and calloc()
functions; it is different from the memory space allocated for stack and code.
3. Dynamically created variables (i.e., declared variables) are created on the heap before the
execution program is initialized to zero.
Memory on the heap is dynamically allocated by the application at run-time and normally
contains program data. Exploitation is performed by corrupting this data in specific ways to
cause the application to overwrite internal structures such as linked list pointers.
How to Minimize Buffer Overflow

Although it is difficult to prevent all possible attacks, the following methods will definitely help to
minimize such attacks:
1. Assessment of secure code manually: Buffer overflow occurs when a program or process
tries to store more data in a buffer than it was intended to hold. Developers should be educated
about minimizing the use of functions like strcpy(), strcat(), sprintf() and vsprintf() in C
Language.
2. Disable stack execution: Malicious Code causes input argument to the program, and it resides
in the stack and not in the code segment. Any code that attempts to execute any other code
residing in the stack will cause a segmentation violation.
3. Compiler tools: Over the years, compilers have become more and more aggressive in
optimizations and the checks they perform. Various compiler tools already off er warnings on the
use of unsafe constructs such as gets(), strcpy(), etc. Developers should be educated to
restructure the programming code if such warnings are displayed.
4. Dynamic run-time checks: In this scheme, an application has restricted access to prevent
attacks. This method primarily relies on the safety code being preloaded before an application is
executed. This preloaded component can either provide safer versions of the standard unsafe
functions or it can ensure that return addresses are not overwritten. One example of such a tool is
libsafe. The libsafe library provides a way to secure calls to these functions, even if the function
is not available.
21
Attacks on Wireless Networks

 Wireless technologies have become increasingly popular in day-to-day business and personal
lives.
 Hand-held devices such as the PDAs allow individuals to access calendars, E-Mail addresses,
phone number lists and the Internet.
 Wireless networks extend the range of traditional wired networks by using radio waves to
transmit data to wireless-enabled devices such as laptops and PDAs.
 Wireless networks are generally composed of two basic elements:
(a) access points (APs) and
(b) other wireless-enabled devices, such as laptops radio transmitters and receivers to
communicate or “connect” with each other (see Fig. 4.6).
 APs are connected through physical wiring to a conventional network, and they broadcast
signals with which a wireless device can connect.
 Wireless access to networks has become very common by now in India – for organizations
and for individuals.
The following are different types of “mobile workers”:

1. Tethered/remote worker: This is considered to be an employee who generally remains at a
single point of work, but is remote to the central company systems.
2. Roaming user: This is either an employee who works in an environment (e.g., warehousing,
shop floor, etc.) or in multiple areas (e.g., meeting rooms).
3. Nomad: This category covers employees requiring solutions in semi-tethered (connected)
environments where modem use frequently.
4. Road warrior: This is the ultimate mobile user and spends little time in the office;
22
Important components of wireless network

1. 802.11 networking standards: Institute of Electrical and Electronics Engineers (IEEE)-
802.11 is a family of standards for wireless local area network (WLAN), stating the specifications
and/or requirements for computer communication.
2. Access points: It is also termed as AP. It is a hardware device and/or software that act as a
central transmitter and receiver of WLAN radio signals. Users of wireless device, such as
laptop/PDAs, get connected with these APs, which in turn get connected with the wired LAN.
An AP acts as a communication hub for users to connect with the wired LAN.
3. Wi-Fi hotspots: A hotspot is a site that offers the Internet access by using Wi-Fi technology
over a WLAN. Hotspots are found in public areas (such as coffee shops, public libraries, hotels
and restaurants) and are commonly offered facility throughout much of North America and
Europe.
• Free Wi-Fi hotspots: Wireless Internet service is offered in public areas, free of cost and that to
without any authentication.
• Commercial hotspots: The users are redirected to authentication and online payment to avail
the wireless Internet service in public areas.
4. Service Set IDentifier (SSID): It is the name of 802.11i WLAN and all wireless devices on a
WLAN must use the same SSID to communicate with each other. While setting up WLAN, the
user (or WLAN administrator) sets the SSID, which can be up to 32 characters long so that only
the users who knew the SSID will be able to connect the WLAN. It is always advised to turn
OFF the broadcast of the SSID.
5. Wired equivalence privacy (WEP): Wireless transmission is susceptible to eavesdropping
and to provide confidentiality, WEP was introduced as part of the original 802.11i Protocol in
1997. It is always termed as deprecated security algorithm for IEEE 802.11i WLANs. SSID
along with WEP delivers fair amount of secured wireless network.
6. Wi-Fi protected access (WPA and WPA2): WPA was introduced as an interim standard to
replace WEP to improve upon the security features of WEP. WPA2 provides a stronger
encryption mechanism through Advanced Encryption Standard (AES), which is a requirement
for some corporate and government agencies.
7. Media access control (MAC): It is a unique identifier of each node (i.e., each network
interfaces) of the network and it is assigned by the manufacturer of a network interface card
(NIC) stored in its hardware. MAC address filtering allows only the devices with specific MAC
addresses to access the network.
Tools used for hacking wireless networks

NetStumbler: This tool is based on Windows OS and easily identifies wireless signals being
broadcast within range.
Kismet: This tool detects and displays SSIDs that are not being broadcast which 0is very critical
in finding wireless networks.
Airsnort: This tool is very easy and is usually used to sniff and crack WEP keys
CowPatty: This tool is used as a brute force tool for cracking WPA-PSK and is considered to be
the “New WEP” for home wireless security.
Wireshark (formerly ethereal): Ethereal can scan wireless and Ethernet data and comes with
some robust filtering capabilities. It can also be used to sniff out 802.11 management Beacons
and probes, and subsequently could be used as a tool to sniff out non-broadcast SSIDs.
23
Traditional Techniques of Attacks on Wireless Networks

In security breaches, penetration of a wireless network through unauthorized access is termed as
wireless cracking. There are various methods that demand high level of technological skill and
knowledge, and availability of numerous software tools made it less sophisticated with minimal
technological skill to crack WLANs.
1. Sniffing: The attacker usually installs the sniffers remotely on the victim’s system and
conducts activities such as
• Passive scanning of wireless network;
• detection of SSID;
• colleting the MAC address;
• collecting the frames to crack WEP.
2. Spoofing: The attacker often launches an attack on a wireless network by simply creating a
new network with a stronger wireless signal and a copied SSID in the same area as a original
network. Different types of Spoofing are as follows.
• MAC address Spoofing
• IP Spoofing:
• Frame Spoofing:
3. Denial of service (DoS): We have explained this attack in detail in UNIT-2.
4. Man-in-the-middle attack (MITM): It refers to the scenario wherein an attacker on host A
inserts A between all communications – between hosts X and Y without knowledge of X and Y.
All messages sent by X do reach Y but through A and vice versa. The objective behind this attack
is to merely observe the communication or modify it before sending it out.
5. Encryption cracking: It is always advised that the first step to protect wireless networks is to
use WPA encryption. The attackers always devise new tools and techniques to deconstruct the
older encryption technology, which is quite easy for attackers due to continuous research in this
field. Hence, the second step is to use a long and highly randomized encryption key; this is very
important. It is a little pain to remember long random encryption; however, at the same time
these keys are much harder to crack.
How to Secure the Wireless Networks

Nowadays, security features of Wi-Fi networking products are not that time-consuming and non-
intuitive; however, they are still ignored, especially, by home users. Although following
summarized steps will help to improve and strengthen the security of wireless network, see Table
4.19 to know the available tools to monitor and protect the wireless networks:
1. Change the default settings of all the equipments/components of wireless network (e.g., IP
address/ user IDs/administrator passwords, etc.).
2. Enable WPA/WEP encryption.
3. Change the default SSID.
4. Enable MAC address filtering.
5. Disable remote login.
6. Disable SSID broadcast.
7. Disable the features that are not used in the AP (e.g., printing/music support).
8. Avoid providing the network a name which can be easily identified (e.g., My_Home_Wifi ).
9. Connect only to secured wireless network (i.e., do not autoconnect to open Wi-Fi hotspots).
24
10. Upgrade router’s firmware periodically.

11. Assign static IP addresses to devices.
12. Enable firewalls on each computer and the router.
13. Position the router or AP safely.
14. Turn off the network during extended periods when not in use.
15. Periodic and regular monitor wireless network security.

Cybersecurity Unit-2 Notes

Uploaded by

Copyright:

Available Formats

Cybersecurity Unit-2 Notes

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Cybersecurity Unit-2 Notes

Uploaded by

Copyright:

Available Formats

1

UNIT -II: Cybercrime Mobile and Wireless Devices:

2. Proliferation (Growth) of Mobile and Wireless Devices,

4. Credit Card Frauds in Mobile and Wireless Computing Era,

5. Security Challenges Posed by Mobile Devices,

6. Registry Settings for Mobile Devices,

7. Authentication Service Security,

8. Attacks on Mobile/Cell Phones,

9. Mobile Devices: Security Implications for Organizations,

10.Organizational Measures for Handling Mobile,

11.Organizational Security Policies and Measures in Mobile Computing Era,

Proliferation (Growth) of Mobile and Wireless Devices

 They are as follows:

Popular types of attacks against 3G mobile networks are as follows:

Credit Card Frauds in Mobile and Wireless Computing Era

(Box 3.2). Tips to Prevent Credit Card Frauds

7. Preserve all the receipts to compare with credit card invoice.

Types and Techniques of Credit Card Frauds

Security Challenges Posed by Mobile Devices

Authentication Service Security

Cryptographic Security for Mobile Devices

LDAP (Lightweight Directory Access Protocol) Security for Hand-Held Mobile

RAS (Remote Access Server) Security for Mobile Devices

Media Player Control Security

Networking API Security for Mobile Computing Applications

Attacks on Mobile/Cell Phones

How Vishing Works

How to Protect from Vishing Attacks

Following are some tips to protect oneself from Vishing attacks:

How to Protect from Smishing Attacks

Following are some tips to protect oneself from Smishing attacks:

Table 3.1 | Bluetooth hacking tools

Among the four above-mentioned attacks, Bluesnarfing is claimed to be much more

Mobile Devices: Security Implications for Organizations

Unconventional/Stealth Storage Devices

 The features of the software allows system administrator to:

Threats through Lost and Stolen Devices

Protecting Data on Lost Devices

Organizational Measures for Handling Mobile

Including Mobile Devices in Security Strategy

Organizational Security Policies and Measures in Mobile Computing Era

Operating Guidelines for Implementing Mobile Device Security Policies

Organizational Policies for the Use of Mobile Hand-Held Devices

3.12.1 Physical Security Countermeasures

Box 3.13 | Spy Phone Software!!!

Tools and Methods Used in Cybercrime

2. Network probe (investigation) :

3. Crossing the line toward electronic crime (E-crime):

4. Capturing the network:

5. Grab the data:

Proxy Servers and Anonymizers

How Phishing Works?

Password cracking attacks can be classified under three categories as follows:

Keyloggers and Spywares

Some Important Keyloggers are as follows

Box 4.3 | Malwares

Virus and Worms

Trojan Horses and Backdoors

Some typical examples of threats by Trojans are as follows: