Motherboard

P5LP-LE
(Leonite)

More user manuals on ManualsBase.com

 E2905
Checklist

First Edition V1
October 2006

Contents
P5LP-LE (Leonite) specifications summary ........................................ iii
1. Motherboard layout ................................................................. 1
2. Central Processing Unit (CPU) ................................................. 2
3. System memory ...................................................................... 5
4. Expansion slots ........................................................................ 8
5. Jumpers ................................................................................. 11
6. Connectors ............................................................................ 12
6.1 Rear panel connectors ............................................. 12
6.2 Internal connectors .................................................. 14

ii

More user manuals on ManualsBase.com

 P5LP-LE specifications summary
CPU LGA775 socket for the Intel® Pentium® 4 and
Conroe processor in the 775-land package

Chipset Northbridge: Intel® 945G Graphics Memory and

Controller Hub (GMCH)
Southbridge: Intel® ICH7DH

Front Side Bus 1066 MHz

(FSB)

Memory Dual-channel memory architecture

4 x 240-pin DIMM sockets support unbuffered
non-ECC 4 GB 667/533/400 MHZ DDR2 memory
modules

Expansion slots 1 x PCI Express™ x16 slot for discrete graphics card
3 x PCI slots

Rear panel 1 x PS/2 keyboard port

1 x PS/2 mouse port
1 x IEEE 1394a port
1 x LAN (RJ-45) port
6 x audio ports support 8-channel audio configuration
4 x USB 2.0 ports support hot-plug function
1 x VGA port
1 x Coaxial SPDIF out port
1 x Coaxial SPDIF in port

Internal connectors 1 x Floppy connector

1 x IDE connector
1 x 24-pin ATX power connector
1 x 4-pin ATX 12 V power connector
4 x Serial ATA connectors
1 x IEEE 1394a connector
2 x USB 2.0 connectors
1 x CPU fan connector
1 x System fan connector
1 x Internal audio connector
1 x Digital audio connector
1 x Front headphone connector
1 x System panel connector

Storage Southbridge supports:

- 2 x Ultra DMA 100/66 hard disk drives
- 4 x Serial ATA hard disk drives with hot-swap
function

(continued on the next page)

iii

More user manuals on ManualsBase.com

 P5LP-LE specifications summary
Audio Southbridge supports 8-channel audio configuration
with Intel® High Definition Audio CODEC
Realtek ALC888 High Definition Audio CODEC

LAN Intel® 82562GT 10/100 Mbps Fast Ethernet

LAN PHY

IEEE 1394 Agere LFW3227 two IEEE 1394a ports

PC health ASUS F8000 for CPU, system, and chassis fan

monitoring control, motherboard and CPU temperature

BIOS features 4 Mb SPI Flash ROM

HP BIOS with enhanced ACPI, DMI, Green, and PnP
Features Plus

Form factor Micro-ATX form factor: 9.6 in x 9.6 in

* Specifications are subject to change without notice

iv

More user manuals on ManualsBase.com

 1. Motherboard layout

24.5cm (9.6in)

PS/2KBMS CLPWD
T: Mouse
B: Keyboard

F8000
SPDIF
LGA775

DDR2 XMM1 (64 bit,240-pin module)

DDR2 XMM2 (64 bit,240-pin module)

DDR2 XMM3 (64 bit,240-pin module)

DDR2 XMM4 (64 bit,240-pin module)
VGA

ATXPWR

FLOPPY
Bottom:
T:USB1 Top: ATX12V
B:USB2 1394

24.5cm (9.6in)
USB2.0
Top: SYS_FAN3
T: USB3 RJ-45

P5LP-LE
B: USB4 CPU_FAN
Intel®
945G
Top: GMCH
Subwoofer Speaker Out
Center
Top:Line In Rear Speaker Out
Below
Center:Line Out Side Speaker Out

IDE
Below:Mic In

PCIEX16

CR2032 3V
PCI1 Lithium Cell
CMOS Power

Intel® CLRTC

PCI2 ICH7DH SATA2 SATA4

Agere
LFW3227 SATA1 SATA3

ALC888
PC3
SPDIF2 F_1394 FRONT_USB1 BUZZ1
F_LINE_IN F_PANEL
F_AUDIO
FRONT_USB2

ASUS P5LP-LE (Leonite) 1

More user manuals on ManualsBase.com

 2. Central Processing Unit (CPU)
The motherboard comes with a surface mount LGA775 socket designed for
the Intel® Pentium® 4 and Conroe processor in the 775-land package.

• Your boxed Intel® Pentium® 4 processor package should

come with installation instructions for the CPU, heatsink, and the
retention mechanism. If the instructions in this section do not match
the CPU documentation, follow the latter.
• Upon purchase of the motherboard, make sure that the PnP cap is
on the socket and the socket contacts are not bent. Contact your
retailer immediately if the PnP cap is missing, or if you see any
damage to the PnP cap/socket contacts/motherboard components.
ASUS will shoulder the cost of repair only if the damage is shipment/
transit-related.
• Keep the cap after installing the motherboard. ASUS will process
Return Merchandise Authorization (RMA) requests only if the
motherboard comes with the cap on the LGA775 socket.
• The product warranty does not cover damage to the socket
contacts resulting from incorrect CPU installation/removal, or
misplacement/loss/incorrect removal of the PnP cap.

Installing the CPU

To install a CPU:

1. Locate the CPU socket on the motherboard.

P5LP-LE

P5LP-LE (Leonite) CPU Socket 775

Before installing the CPU, make sure that the socket box is facing
towards you and the load lever is on your left.

2 ASUS P5LP-LE (Leonite)

More user manuals on ManualsBase.com

 2. Press the load lever with your thumb (A), then move it to the left (B)
until it is released from the retention tab.

Retention tab
A
Load lever PnP cap

B This side of the

socket box should
face you.

To prevent damage to the socket pins, do not remove the PnP cap
unless you are installing a CPU.

3. Lift the load lever in the

direction of the arrow to a 135º
angle.

4. Lift the load plate with your

thumb and forefinger to a B
100º angle (A), then push
the PnP cap from the load
plate window to remove (B). A

Load plate

5. Position the CPU over

the socket, making
sure that the gold
triangle is on the
bottom-left corner of
the socket. The
Alignment key
socket alignment key
should fit into the
CPU notch. Gold triangle mark

ASUS P5LP-LE (Leonite) 3

More user manuals on ManualsBase.com

 6. Close the load plate (A), then A
push the load lever (B) until
it snaps into the retention
tab.
B

The CPU fits in only one correct orientation. DO NOT force the CPU into
the socket to prevent bending the connectors on the socket and
damaging the CPU!

Notes on Intel® Hyper-Threading Technology

• This motherboard supports Intel® Pentium® 4 processor in the

775-land package with Hyper-Threading Technology.
• Hyper-Threading Technology is supported under Windows® XP/2003
Server and Linux 2.4.x (kernel) and later versions only. Under Linux,
use the Hyper-Threading compiler to compile the code. If you are
using any other operating systems, disable the Hyper-Threading
Techonology item in the BIOS to ensure system stability and
performance.
• Installing Windows® XP Service Pack 1 or later version is recommended.
• Make sure to enable the Hyper-Threading Technology item in BIOS
before installing a supported operating system.
• For more information on Hyper-Threading Technology, visit
www.intel.com/info/hyperthreading.

To use the Hyper-Threading Technology on this motherboard:

1. Install an Intel® Intel® Pentium® 4 processor that supports

Hyper-Threading Technology.
2. Power up the system and enter the BIOS Setup. Under the Advanced
Menu, make sure that the item Hyper-Threading Technology is set to
Enabled. The item appears only if you installed a CPU that supports
Hyper-Threading Techonology.
3. Reboot the computer.

4 ASUS P5LP-LE (Leonite)

More user manuals on ManualsBase.com

 3. System memory
The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline
Memory Module (DIMM) sockets.
A DDR2 module has the same physical dimensions as a DDR DIMM but has a
240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are
notched differently to prevent installation on a DDR DIMM socket.
The following figure illustrates the location of the DDR2 DIMM sockets.

XMM2
XMM3

XMM4
XMM1
P5LP-LE

P5LP-LE (Leonite) 240-pin DDR2 DIMM sockets

3.1 Memory configurations

You can install 256 MB, 512 MB, and 1 GB DDR2 SDRAM DIMMs into the
DIMM sockets using the memory configurations in this section.

• Installing DDR2 DIMMs other than the recommended configurations

may cause memory sizing error or system boot failure. Use any of
the recommended configurations on the next page.
• Install only i d e n t i c a l (the same type and size) DDR2 DIMM pairs
using the recommended configurations.
• Make sure that the memory frequency matches the CPU FSB (Front
Side Bus). Refer to the Memory frequency/CPU FSB synchronization
table on the next page.
• This motherboard does not support double-sided 16-bit DDR DIMMs.
• Do not create a three-DIMM configuration in dual-channel mode. The
third DIMM is ignored in the dual-channel operation.

ASUS P5LP-LE (Leonite) 5

More user manuals on ManualsBase.com

 Recommended memory configurations

Sockets
Mode DIMM1 DIMM2 DIMM3 DIMM4
Single-channel (1) Installed — — —
(2) — Installed — —
(3) — — Installed —
(4) — — — Installed
Dual-channel* (1) Installed — Installed —
(2) — Installed — Installed
(3) Installed Installed Installed Installed

* Use only identical DDR2 DIMM pairs.

Memory frequency/CPU FSB synchronization

CPU FSB DDR DIMM Type Memory Frequency

1066 MHz PC2-5300/PC2-4200 667/533 MHz
800 MHz PC2-5300/PC2-4200/PC2-3200 667/533/400 MHz
533 MHz PC2-5300/PC2-4200/PC2-3200 667/533/400 MHz

6 ASUS P5LP-LE (Leonite)

More user manuals on ManualsBase.com

 3.2 Installing a DDR2 DIMM

Unplug the power supply before adding or removing DIMMs or other

system components. Failure to do so can cause severe damage to both
the motherboard and the components.

To install a DIMM: 2
DDR2 DIMM notch
3
1. Unlock a DIMM socket by
pressing the retaining clips
outward.
2. Align a DIMM on the socket
such that the notch on the
DIMM matches the break on 1
the socket.
3. Firmly insert the DIMM into the
socket until the retaining clips
snap back in place and the
DIMM is properly seated.
Unlocked retaining clip

• A DDR2 DIMM is keyed with a notch so that it fits in only one

direction. Do not force a DIMM into a socket to avoid damaging the
DIMM.
• The DDR2 DIMM sockets do not support DDR DIMMs. Do not install
DDR DIMMs to the DDR2 DIMM sockets.

3.3 Removing a DDR2 DIMM

To remove a DIMM:
2
1. Simultaneously press the retaining
clips outward to unlock the DIMM.

Support the DIMM lightly 1

with your fingers when
pressing the retaining
1 DDR2 DIMM notch
clips. The DIMM might get
damaged when it flips out
with extra force.

2. Remove the DIMM from the socket.

ASUS P5LP-LE (Leonite) 7

More user manuals on ManualsBase.com

 4. Expansion slots
In the future, you may need to install expansion cards. The following
sub-sections describe the slots and the expansion cards that they support.

Make sure to unplug the power cord before adding or removing

expansion cards. Failure to do so may cause you physical injury and
damage motherboard components.

4.1 Installing an expansion card

To install an expansion card:

1. Before installing the expansion card, read the documentation that

came with it and make the necessary hardware settings for the card.
2. Remove the system unit cover (if your motherboard is already
installed in a chassis).
3. Remove the bracket opposite the slot that you intend to use. Keep
the screw for later use.
4. Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
5. Secure the card to the chassis with the screw you removed earlier.
6. Replace the system cover.

4.2 Configuring an expansion card

After installing the expansion card, configure it by adjusting the software
settings.

1. Turn on the system and change the necessary BIOS settings, if any.
2. Assign an IRQ to the card. Refer to the tables on the next page.
3. Install the software drivers for the expansion card.

When using PCI cards on shared slots, ensure that the drivers support
“Share IRQ” or that the cards do not need IRQ assignments; otherwise,
conflicts will arise between the two PCI groups, making the system
unstable and the card inoperable. Refer to the table on the next page for
details.

8 ASUS P5LP-LE (Leonite)

More user manuals on ManualsBase.com

 Standard interrupt assignments

IRQ Standard Function

0 System Timer
1 Standard 101/102-key or Microsoft® Natural PS/2 Keyboard
2 Programmable Interrupt Controller
3 Intel® USB Enhanced Host Controller
3 Intel® USB Universal Host Controller
4 Intel® USB Universal Host Controller
6 Standard Floppy Disk Controller
7 ECP Printer Port
8 System CMOS/Real Time Clock
9 SCI IRQ used by ACPI Bus
10 Intel® PCI Express Root Port
10 Intel® VGA Controller
10 Intel® ICH7DH High Definition Audio Controller
10 Intel® USB Universal Host Controller
11 VIA OHCI Compliant IEEE 1394 Host Controller
11 Intel® ICH7DH Integrated LAN Controller
12 Microsoft® Port Mouse
13 Numeric Data Processor
14 Intel® USB Universal Host Controller
14 Intel® Ultra ATA Storage Controllers
14 Intel® SMBus Controller

IRQ assignments for this motherboard

A B C D E F
PCI slot 1 — — — shared — —
PCI slot 2 shared — — — — —
PCI slot 3 — used — — — —
Onboard LAN — — — — — used
Onboard 1394 controller — — — — used —

ASUS P5LP-LE (Leonite) 9

More user manuals on ManualsBase.com

 PCI Express slot
This motherboard has one PCI
Express slot, which supports a
164-pin x16 interface graphics
card.

PCI slots
There are three 32-bit PCI slots on
this motherboard. The slots
support PCI cards such as a LAN
card, SCSI card, USB card, and
other cards that comply with PCI
specifications.

10 ASUS P5LP-LE (Leonite)

More user manuals on ManualsBase.com

 5. Jumpers
Clear RTC RAM (3-pin CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in
CMOS. You can clear the CMOS memory of date, time, and system
setup parameters by erasing the CMOS RTC RAM data. The onboard
button cell battery powers the RAM data in CMOS, which include
system setup information such as system passwords.
To erase the RTC RAM:

1. Turn OFF the computer and unplug the power cord.

2. Move the jumper cap from pins 2-3 (Normal) to pins 1-2 (Clear
CMOS). Keep the cap on pins 1-2 for about 5~10 seconds, then
move the cap back to pins 2-3.
3. Plug the power cord and turn ON the computer.
4. Hold down the <Del> key during the boot process and enter BIOS
setup to re-enter data.

Except when clearing the RTC RAM, never remove the cap from the
default position. Removing the cap will cause system boot failure!
P5LP-LE

CLRTC
3
2 2
1
Clear CMOS Normal
P5LP-LE (Leonite) (Default)
Clear RTC RAM

Clear password (3-pin CLPWD)

This jumper allows you to clear the password if you forgot your
password.
CLPWD
3
2 2
1
Clear Password Normal
(Default)
P5LP-LE

P5LP-LE (Leonite)
Clear password setting

ASUS P5LP-LE (Leonite) 11

More user manuals on ManualsBase.com

 6. Connectors
6.1 Rear panel connectors
4
5
1 2 3
6

15 14 13 12 11 10

1. P S / 2 m o u s e p o r t ( g r e e n ) . This port is for a PS/2 mouse.

2. I E E E 1 3 9 4 a p o r t . This 6-pin IEEE 1394a port provides high-speed
connectivity for audio/video devices, storage peripherals, PCs, or
portable devices.
3. L A N ( R J - 4 5 ) p o r t . This port allows connection to a Local Area
Network (LAN) through a network hub.
4. S i d e S p e a k e r O u t p o r t ( g r a y ) . This port connects to the side
speakers in an 8-channel audio configuration.
5. R e a r S p e a k e r O u t p o r t ( b l a c k ) . This port connects to the rear
speakers on a 4-channel, 6-channel, or 8-channel audio configuration.
6. C e n t e r / S u b w o o f e r p o r t ( y e l l o w o r a n g e ) . This port connects
the center/subwoofer speakers.
7. L i n e I n p o r t ( l i g h t b l u e ) . This port connects a tape, CD, DVD
player or other audio sources.
8. L i n e O u t p o r t ( l i m e ) . This port connects a headphone or a
speaker. In 4-channel, 6-channel, and 8-channel mode, the function of
this port becomes Front Speaker Out.
9. M i c r o p h o n e p o r t ( p i n k ) . This port connects a microphone.

12 ASUS P5LP-LE (Leonite)

More user manuals on ManualsBase.com

 Audio 2, 4, 6, or 8-channel configuration

Port Headset/
2-channel 4-channel 6-channel 8-channel
Light Blue Line In Line In Line In Line In
Lime Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink Mic In Mic In Mic In Mic In
Yellow Orange - - Center/Subwoofer Center/Subwoofer
Black - Rear Speaker Out Rear Speaker Out Rear Speaker Out
Gray - - - Side Speaker Out

1 0 . U S B 2 . 0 p o r t s 3 a n d 4 . These two 4-pin Universal Serial Bus

(USB) ports are available for connecting USB 2.0 devices.
1 1 . U S B 2 . 0 p o r t s 1 a n d 2 . These two 4-pin Universal Serial Bus
(USB) ports are available for connecting USB 2.0 devices.
1 2 . V i d e o G r a p h i c s A d a p t e r p o r t . This 15-pin port is for a VGA
monitor or other VGA-compatible devices.
1 3 . C o a x i a l S / P D I F O u t p o r t . This port connects an external audio
output device via a coaxial S/PDIF cable.
1 4 . C o a x i a l S / P D I F I n p o r t . This port connects an external audio input
device via a coaxial S/PDIF cable.
1 5 . P S / 2 k e y b o a r d p o r t ( p u r p l e ) . This port is for a PS/2 keyboard.

ASUS P5LP-LE (Leonite) 13

More user manuals on ManualsBase.com

 6.2 Internal connectors
This section describes and illustrates the internal connectors on the
motherboard.
1. Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the provided floppy disk drive (FDD) signal cable.
Insert one end of the cable to this connector, then connect the other
end to the signal connector at the back of the floppy disk drive.

Pin 5 on the connector is removed to prevent incorrect cable connection

when using an FDD cable with a covered Pin 5.

PIN 1 FLOPPY
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
P5LP-LE

P5LP-LE (Leonite) Floppy disk drive connector

14 ASUS P5LP-LE (Leonite)

More user manuals on ManualsBase.com

 2. IDE connector (40-1 pin IDE)
This connector is for an Ultra DMA 100/66 signal cable. The Ultra DMA
100/66 signal cable has three connectors: a blue connector for the
primary IDE connector on the motherboard, a black connector for an
Ultra DMA 100/66 IDE slave device (optical drive/hard disk drive), and
a gray connector for an Ultra DMA 100/66 IDE master device (hard disk
drive). If you install two hard disk drives, you must configure the
second drive as a slave device by setting its jumper accordingly. Refer
to the hard disk documentation for the jumper settings.

• Pin 20 on the IDE connector is removed to match the covered hole

on the Ultra DMA cable connector. This prevents incorrect insertion
when you connect the IDE cable.
• Use the 80-conductor IDE cable for Ultra DMA 100/66 IDE devices.

IDE
NOTE: Orient the red markings
(usually zigzag) on the IDE
ribbon cable to PIN 1.
P5LP-LE

P5LP-LE (Leonite) IDE connector PIN 1

ASUS P5LP-LE (Leonite) 15

More user manuals on ManualsBase.com

 3. ATX power connectors (24-pin ATXPWR, 4-pin ATX12V)
These connectors are for an ATX power supply. The plugs from the
power supply are designed to fit these connectors in only one
orientation. Find the proper orientation and push down firmly until the
connectors completely fit.

• Do not forget to connect the 4-pin ATX +12 V power plug;

otherwise, the system will not boot up.
• Make sure that your ATX 12V power supply can provide 8A on the
+12V lead and at least 1A on the +5-volt standby lead (+5VSB).
The minimum recommended wattage is 230W, or 300W for a fully
configured system. The system can become unstable and might
experience difficulty powering up if the power supply is inadequate.
• You must install a PSU with a higher power rating if you intend to
install additional devices.

ATXPWR

ATX12V +3 Volts +3 Volts

GND +12V DC -12 Volts +3 Volts
Ground Ground
PSON# +5 Volts
P5LP-LE

Ground Ground
Ground +5 Volts
GND +12V DC
Ground Ground
-5 Volts Power OK
+5 Volts +5V Standby
+5 Volts +12 Volts
+5 Volts +12 Volts
P5LP-LE (Leonite) ATX power connectors Ground +3 Volts

16 ASUS P5LP-LE (Leonite)

More user manuals on ManualsBase.com

 4. Serial ATA connectors
(7-pin SATA1 [black], SATA2 [white], SATA3 [blue],
SATA4 [yellow])
These connectors are for the Serial ATA signal cables for Serial ATA
hard disk drives.

SATA2 SATA4

RSATA_TXP2
RSATA_TXN2

RSATA_RXP2
RSATA_RXN2

RSATA_TXP4
RSATA_TXN4

RSATA_RXP4
RSATA_RXN4
GND

GND

GND

GND

GND

GND
P5LP-LE

SATA1 SATA3

RSATA_TXP3
RSATA_TXN3

RSATA_RXP3
RSATA_RXN3
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND

GND

GND

GND
P5LP-LE (Leonite) SATA connectors

Important notes on Serial ATA

• Install the Windows® 2000 Service Pack 4 or the Windows® XP
Service Pack1 before using Serial ATA.
• When using the connectors in S t a n d a r d I D E mode, connect the
primary (boot) hard disk drive to the SATA1 connector. Refer to the
table below for the recommended SATA hard disk drive connections.

Serial ATA hard disk drive connection

Connector Color Setting Use

SATA1 Black Master Boot Disk

SATA2 White Master Boot Disk
SATA3 Blue Slave Data Disk
SATA4 Yellow Slave Data Disk

ASUS P5LP-LE (Leonite) 17

More user manuals on ManualsBase.com

 5. IEEE 1394a connector (10-1 pin F_1394)
This connector is for an IEEE 1394a port. Connect the IEEE 1394a
module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
P5LP-LE

+12V
TPB-
GND

GND
TPA-
F_1394
1
TPA+
GND
TPB+
+12V
P5LP-LE (Leonite) IEEE 1394 connector

NEVER connect a U S B c a b l e to the IEEE 1394a connector. Doing so

will damage the motherboard!

6. USB connectors (10-1 pin FRONT_USB1, FRONT_USB2)

These connectors are for USB 2.0 ports. Connect the USB/GAME
module cable to any of these connectors, then install the module to a
slot opening at the back of the system chassis. These USB connectors
comply with USB 2.0 specification that supports up to 480 Mbps
connection speed.

FRONT_USB1 FRONT_USB2
USB_P5+

USB_P5+
USB_P5-

USB_P5-
USB+5V

USB+5V
P5LP-LE

GND

GND
NC
GND
USB_P6+
USB_P6-
USB+5V

NC
GND
USB_P6+
USB_P6-
USB+5V

P5LP-LE (Leonite) USB 2.0 connectors

Never connect a 1 3 9 4 c a b l e to the USB connectors. Doing so will

damage the motherboard!

18 ASUS P5LP-LE (Leonite)

More user manuals on ManualsBase.com

 7. CPU and System fan connectors
(4-pin CPU_FAN, 3-pin SYS_FAN3)
The fan connectors support cooling fans of 350 mA ~ 740 mA
(8.88 W max.) or a total of 1 A~2.22 A (26.64 W max.) at +12 V.
Connect the fan cables to the fan connectors on the motherboard,
making sure that the black wire of each cable matches the ground pin
of the connector.

Do not forget to connect the fan cables to the fan connectors.

Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! DO NOT place jumper caps on the
fan connectors.

CPU_FAN SYS_FAN3
P5LP-LE

Rotation
+12V
GND
+12V
PWN
Rotation
GND

P5LP-LE (Leonite) Fan connectors

8. Internal audio connector (F_LINE_IN)

This connector allows you to receive stereo audio input from sound
sources such as a CD-ROM, TV tuner, or MPEG card.
P5LP-LE

F_LINE_IN
AUX_LCR
SENSE
GND
AUX_RCR

P5LP-LE (Leonite) Internal audio connector

ASUS P5LP-LE (Leonite) 19

More user manuals on ManualsBase.com

 9. Digital audio connector (3-pin SPDIF2 )
This connector is for an additional Sony/Philips Digital Interface
(S/PDIF) port(s). Connect the S/PDIF module cable to this connector,
then install the module to a slot opening at the back of the system
chassis.

The S/PDIF module is purchased separately.

P5LP-LE

SPDIF2
(White)
+5V
SPDIF_OUT
GND

P5LP-LE (Leonite) Digital audio connector

10. Front panel audio connector (10-1-pin F_AUDIO)

This connector is for a chassis-mounted front panel headphone port.
MIC2_R
MIC2_L
SENSE
LIN2_R
LIN2-L

1
P5LP-LE

F_AUDIO
LIN2_RTU

MIC2_RTU
AUDIO_PRES#
GND

P5LP-LE (Leonite) Front panel audio connector

20 ASUS P5LP-LE (Leonite)

More user manuals on ManualsBase.com

 1 1 . System panel connector (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.

Reset HDD LED

HDLED+
HDLED-
Ground
Reset
P5LP-LE

NC
F_PANEL

GND
PWR
PLED-
PLED+
Power Button Power LED
P5LP-LE (Leonite) System panel connector

• System power LED

This 2-pin connector is for the system power LED. Connect the
chassis power LED cable to this connector. The system power LED
lights up when you turn on the system power, and blinks when the
system is in sleep mode.
• Hard disk drive activity
This 2-pin connector is for the HDD Activity LED. Connect the HDD
Activity LED cable to this connector. The IDE LED lights up or flashes
when data is read from or written to the HDD.
• Power/Soft-off button
This connector is for the system power button. Pressing the power
button turns the system ON or puts the system in SLEEP or SOFT-OFF
mode depending on the BIOS settings. Pressing the power switch for
more than four seconds while the system is ON turns the system OFF.
• Reset button
This 2-pin connector is for the chassis-mounted reset button for
system reboot without turning off the system power.

ASUS P5LP-LE (Leonite) 21

More user manuals on ManualsBase.com

22 ASUS P5LP-LE (Leonite)