Scribd Logo
Upload

Welcome to Scribd!

  • 8 views

    ضبط الاعدادات الاساسية مع Telnet and SSH

    Uploaded by

    mhmad4m44
    This document discusses Cisco IOS levels and switch configuration. It describes configuring VLANs on a switch to separate traffic for different departments. VLANs 10, 20 and 30 are created for HR, IT and Finance. Ports are assigned to each VLAN and an IP address is configured on each VLAN interface to allow DHCP addressing for client devices in each VLAN subnet. A trunk port is also configured to allow traffic between the VLANs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ضبط الاعدادات الاساسية مع Telnet and SSH

    Uploaded by

    mhmad4m44
    8 views31 pages
    This document discusses Cisco IOS levels and switch configuration. It describes configuring VLANs on a switch to separate traffic for different departments. VLANs 10, 20 and 30 are created for HR, IT and Finance. Ports are assigned to each VLAN and an IP address is configured on each VLAN interface to allow DHCP addressing for client devices in each VLAN subnet. A trunk port is also configured to allow traffic between the VLANs.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document discusses Cisco IOS levels and switch configuration. It describes configuring VLANs on a switch to separate traffic for different departments. VLANs 10, 20 and 30 are created for HR, IT and Finance. Ports are assigned to each VLAN and an IP address is configured on each VLAN interface to allow DHCP addressing for client devices in each VLAN subnet. A trunk port is also configured to allow traffic between the VLANs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    8 views31 pages

    ضبط الاعدادات الاساسية مع Telnet and SSH

    Uploaded by

    mhmad4m44
    This document discusses Cisco IOS levels and switch configuration. It describes configuring VLANs on a switch to separate traffic for different departments. VLANs 10, 20 and 30 are created for HR, IT and Finance. Ports are assigned to each VLAN and an IP address is configured on each VLAN interface to allow DHCP addressing for client devices in each VLAN subnet. A trunk port is also configured to allow traffic between the VLANs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 31

    ‫مستويات سيسكو في برمجة اﻷجهزة‬

    Router> (User Executive Mode) ‫مستوى المستخدم‬

    Router> Enable (Privilege Executive Mode) ‫مستوى الوصول‬

    Router# Configure Terminal (Global Configuration Mode) ‫مستوى اﻹعدادات‬

    (Other Specific Configuration Mode) ‫مستوى إعدادات المنفذ‬


    Router(Config)# interface fast Ethernet 0/1
    Router(Config-if)# interface fast Ethernet 0/1
    ‫مستويات سيسكو في برمجة اﻷجهزة‬
    Router> Enable
    ‫لضبط المنطقة الزمنية‬
    Router# Configure Terminal
    Router(Config)# clock timezone Yemen 3

    Router> Enable ‫لضبط الوقت و التاريخ‬


    Router# clock set 10:10:10 25 Aug 2021

    Router> Enable
    Router# terminal history size 30
    ‫لتخزين عدد اﻷوامر‬
    Router# show history
    Router>enable
    Router# configure terminal
    Router# hostname ………. CCNA
    Router(config)# line console 0
    Router(config-line)# Password cisco1234
    Router(config)#enable password 111*
    Router(config)#enabe secret 111*
    Router(config-line)# login
    Router#exit
    Router# copy ruinng–config startup-config
    Router #wr
    Router(config)# enable password 12345*
    : ‫لتشفير مستوى اﻻعدادات‬
    Router(config)# enable secret 12345*

    Router(config)# Service password-encryption -:‫لتشفير كلمة المرور نستخدم اﻷمر‬

    Router>
    Router# show running-config : ‫لعرض ملف اﻻعدادات‬
    Router# show ip interface brief
    Server Configuration
    IP Address 192.168.1.1
    Subnet 255.255.255.0
    Gateway 192.168.1.1
    DNS 8.8.8.8
    PC1- Configuration
    IP Address 192.168.1.2
    Subnet 255.255.255.0
    Gateway 192.168.1.1
    DNS 8.8.8.8
    PC2- Configuration
    IP Address 192.168.1.3
    Subnet 255.255.255.0
    Gateway 192.168.1.1
    DNS 8.8.8.8
    PC> ping 192.168.1.1
    VLAN
    Switch > enable
    Switch# configure terminal
    Switch(config)# vlan 1
    Switch(config-vlan)# name Business
    Switch(config-vlan)# exit
    Switch(config)# vlan 2
    Switch(config-vlan)# name IT
    Switch(config-vlan)# exit
    Switch(config)# vlan 3
    Switch(config-vlan)# name Management
    Switch(config-vlan)# exit
    Switch(config)# interface fastethernet 0/1
    Switch(config-if)# switchport access vlan 1
    Switch(config-if)# exit
    Switch(config)# interface fastethernet 0/8
    Switch(config-if)# switchport access vlan 2
    Switch(config-if)# exit
    Switch(config)# interface fastethernet 0/14
    Switch(config-if)# switchport access vlan 3
    Switch(config)# exit
    Switch# copy runing-config startup-config
    Switch>enable
    Switch#configure terminal
    Switch(config)#vlan 10
    Switch(config-vlan)#name HR
    Switch(config-vlan)#exit
    Switch(config)#interface range fastEthernet 0/1-8
    Switch(config-if-range)#switchport mode access
    Switch(config-if-range)#switchport access vlan 10
    Switch(config-if-range)#exit
    Switch(config)#vlan 20
    Switch(config-vlan)#name IT
    Switch(config-vlan)#exit
    Switch(config)#interface range fastEthernet 0/9-16
    Switch(config-if-range)#switchport mode access
    Switch(config-if-range)#switchport access vlan 20
    Switch(config-if-range)#exit
    Switch(config)#vlan 30
    Switch(config-vlan)#name Finance
    Switch(config-vlan)#exit
    Switch(config)#interface range fastEthernet 0/17- 24
    Switch(config-if-range)#switchport mode access
    Switch(config-if-range)#switchport access vlan 30
    Switch(config-if-range)#exit
    Switch(config)#interface gigabitEthernet 0/1
    Switch(config-if)#switchport mode trunk
    Switch(config-if)#exit
    Switch(config)#exit
    Switch#
    Switch#show vlan
    Switch#show interfaces trunk
    Switch>enable
    Switch# configure terminal
    Switch(config)#interface vlan 10
    Switch(config-if)#ip add 192.168.10.1 255.255.255.0
    Switch(config-if)#no shutdown
    Switch(config-if)#exit
    Switch(config)#
    Switch(config)#ip dhcp pool MY_LAN
    Switch(dhcp-config)#network 192.168.10.0 255.255.255.0
    Switch(dhcp-config)#default-router 192.168.10.1
    Switch(dhcp-config)#dns-server 192.168.10.10
    Switch(config)#interface vlan 20
    Switch(config-if)#ip add 192.168.20.1 255.255.255.0
    Switch(config-if)#no shutdown
    Switch(config-if)#exit
    Switch(config)#
    Switch(config)#ip dhcp pool MY_LAN
    Switch(dhcp-config)#network 192.168.20.0 255.255.255.0
    Switch(dhcp-config)#default-router 192.168.20.1
    Switch(dhcp-config)#dns-server 192.168.20.10
    Switch(config)#interface vlan 30
    Switch(config-if)#ip add 192.168.30.1 255.255.255.0
    Switch(config-if)#no shutdown
    Switch(config-if)#exit
    Switch(config)#
    Switch(config)#ip dhcp pool MY_LAN
    Switch(dhcp-config)#network 192.168.30.0 255.255.255.0
    Switch(dhcp-config)#default-router 192.168.30.1
    Switch(dhcp-config)#dns-server 192.168.30.10
    Switch(dhcp-config)#exit
    Switch(config)#exit
    Switch#

    You might also like