MOUNT ZION COLLEGE OF ENGINEERING AND

TECHNOLOGY

Lena Vilakku, Pudukkottai.

CS3691- EMBEDDED SYSTEMS AND IOT

LABORATORY

LA LAB MANUAL

Regulation : 2021

Branch : B.E - CSE

Year & Semester : III Year / VI Semester

 ANNA UNIVERSITY CHENNAI
Regulation 2021
CS3691 LABARATORY

SYLLABUS

LIST OF EXPERIMENTS

1. Write 8051 Assembly Language experiments using simulator.

2. Test data transfer between registers and memory.
3. Perform ALU operations.
4. Write Basic and arithmetic Programs Using Embedded C.
5. Introduction to Arduino platform and programming
6. Explore different communication methods with IoT devices (Zigbee, GSM,
Bluetooth)
7. Introduction to Raspberry PI platform and python programming
8. Interfacing sensors with Raspberry PI
9. Communicate between Arduino and Raspberry PI using any wireless medium
10. Setup a cloud platform to log the data
11. Log Data using Raspberry PI and upload to the cloud platform
12. Design an IOT based system

TOTAL: 30 PERIODS
 EXP NO: 1
8051 Assembly Language program using Keil simulator
DATE

AIM:
To write 8051 Assembly Language Program for an 8-bit addition using Keil simulator and
execute it.

SOFTWARE REQUIRED:

S.No Software Requirements Quantity

1 MCU 8051 IDE 1

INTRODUCTION TO 8051 SIMULATORS:

A simulator is software that will execute the program and show the results exactly
to the program running on the hardware, if the programmer finds any errors in the
program while simulating the program in the simulator, he can change the program and
re-simulate the code and get the expected result, before going to the hardware testing.
The programmer can confidently dump the program in the hardware when he simulates
his program in the simulator and gets the expected results.
8051 controller is a most popular 8-bit controller which is used in a large number
of embedded applications and many programmers write programs according to their
application. So testing their programs in the software simulators is a way. Simulators
will help the programmer to understand the errors easily and the time taken for the
testing is also decreased.
These simulators are very useful for students because they do need not to build the
complete hardware for testing their program and validate their program very easily in an
interactive way.

List of 8051 Simulators:

The list of simulators is given below with their features:

EDSIM 51:
This is a virtual 8051 interfaced with virtual peripherals like 7 segment
display, motor, keypad, UART etc. This simulator is exclusively for students developed
by James Rogers,. The features of this simulator are
 Have virtual peripherals like ADC, DAC with scope to display, comparator etc.
 Supports only assembly language
 IDE is completely written in JAVA and supports all the OS.
 Completely free and with user guide, examples, etc.
8051 IDE:
This simulation software is exclusively for the Windows operating system
(98/xp). The features of this simulator are
 Text editor, assembler, and software simulate in one single program.
 Has facilities like Breakpoint setter, execute to break point, predefined

simulator watch window, etc.

 It is available in both free version and paid version.

KEIL µVision:
KEIL is the most popular software simulator. It has many features like
interactive IDE and supports both C and assembly languages for compilation and simulation.

MCU 8051:
MCU 8051 is an 8051 simulator that is very simple to use and has an interactive
IDE (Integrated Development Environment). It is developed by Martin Osmera and most
important of all is that it is completely free. There are many features for this IDE they are

 It supports both C and assembly language for compilation and simulationIt has

an in-built source code editor, graphical notepad, ASCII charts, Assembly

symbol viewer, etc. It also supports several 8051 ICs like at89c51, A89S52, 8051,
8052, etc.
 It will support certain electronic simulations like LED, 7segment display, LCD

etc. which will help in giving the output when you interface these things to the
hardware directly.
 It has tools like hex decimal editors, base converters, special calculator, file

converters, inbuilt hardware programmers, etc.

 It has syntax validation, pop base auto-completion etc.

INSTALLATION OF MCU 8051 IDE:

To start writing a new program, you need to create a new project. Navigate to project
—> New project. Then save the new project in a folder.
After saving the file, a new window will pop up asking you to select your microcontroller.
As discussed, we are using AT89C51/AT89C51ED2/AT89C52, so select this controller
under the Microchip section (as Atmel is now a part of Microchip).

Select ‘Yes’ in the next pop-up, as we do not need this file in our project.

Our project workspace is now ready!

From here, we need to create a file where we can write our C code. Navigate to File —
> New. Once the file is created, save it with .c extension in the same project folder.
 Next type the assembly code and debug the code.

PROCEDURE

1. Create a new project, go to “Project” and close the current project “Close Project”.
2. Next Go to the Project New Project and Create New Project.

3. Write a program on the editor window and save it with .

4. Choose any directory to save the file.

5. Add this source file to Group and click on “Build Target” or F7.
6. Go to debugging mode to see the result of simulation by clicking Run or step run.8.
7. Next click the play button to see the output.
 PROGRAM:

ORG 0000H
CLR C
MOV A, #20H
ADD A, #21H
MOV R0, A
END

OUTPUT:

RESULT:
Thus the 8051 assembly language program for addition using simulator has been
executed successfully.
EXP NO: 2
Test data transfer between registers and memory
DATE

AIM:
To write and execute an Assembly language program to transfer data between
registers and memory.

SOFTWARE REQUIRED:

S.No Software Requirements Quantity

1 MCU 8051 IDE 1

PROCEDURE

1. Create a new project, go to “Project” and close the current project “Close Project”.

2. Next Go to the Project New Project and Create New Project.

3. Write a program on the editor window and save it with .

4. Choose any directory to save the file.

5. Add this source file to Group and click on “Build Target” or F7.

6. Go to debugging mode to see the result of simulation by clicking Run or step run.8.

7. Next click the play button to see the output.

PROGRAM: [TYPE - I]

ORG 0000H
CLR C
MOV R0, #55H
MOV R1, #6FH
MOV A, R0
MOV 30H, A
MOV A, R1
MOV 31H, A
END
 OUTPUT:

PROGRAM: [TYPE - II]

ORG 0000H
CLR C
MOV R0, #30H
MOV R1, #40H
MOV R7, #06H
BACK: MOV A, @R0
MOV @R1, A
INC R0
INC R1
DJNZ R7, BACK
END

OUTPUT:

RESULT:
Thus the 8051 assembly language program for data transfer from registers to
memory using simulator has been executed successfully.
EXP NO: 3
ALU OPERATIONS
DATE

AIM:
To write and execute the ALU program using the Keil simulator.

SOFTWARE TOOLS REQUIRED:

S.No Software Requirements Quantity

1 MCU 8051 IDE 1

PROCEDURE:

1. Create a new project, go to “Project” and close the current project “Close Project”.
2. Next Go to the Project New μVision Project.

3. Create New Project Select Device for Target.

4. Select the device AT89C51ED2 or AT89C51 or AT89C52

5. Add Startup file Next go to “File” and click “New”.
6. Write a program on the editor window and save it with .asm extension.
7. Add this source file to Group and click on “Build Target” or F7.
8. Go to debugging mode to see the result of simulation by clicking Run or step run.

PROGRAM:

ORG 0000H CLR C

//ADDITION MOV
A, #20H ADD A,
#21H MOV 41H, A

//SUBTRACTION
MOV A, #20H SUBB A,
#18H MOV 42H, A

//MULTIPLICATION MOV
A, #03H
MOV B, #04H
MUL AB MOV
43H, A

//DIVISION MOV
A, #95H MOV B,
#10H DIV AB
MOV 44H, A MOV
45H, B

//AND
MOV A, #25H
MOV B, #12H
ANL A, B MOV
46H, A

//OR
MOV A, #25H
MOV B, #15H
ORL A, B MOV
47H, A

//XOR
MOV A, #45H
MOV B, #67H

XRL A, B MOV
48H, A

//NOT
MOV A, #45H CPL
A
MOV 49H, A END

OUTPUT:

RESULT:
Thus the 8051 assembly language program to perform ALU operations using
simulator has been executed successfully.
EXP NO: 4a
WRITE BASIC PROGRAMS USING EMBEDDED C
DATE

AIM:
To write a basic embedded C program to control a port 0 pin 0 connected to an
8051microcontroller using a Keil simulator.

SOFTWARE REQUIRED:

S.No Software Requirements Quantity

1 Keil μvision5 IDE 1

INSTALLATION OF KEIL SOFTWARE:

Set up Keil IDE for Programming

Keil µVision IDE is a popular way to program MCUs containing the 8051 architectures.
It supports over 50 microcontrollers and has good debugging tools including logic
analyzers and watch windows.
In this article, we will use the AT89C51ED2 microcontroller, which has:
 64 KB FLASH ROM
 On-chip EEPROM
 256 Bytes RAM
 In-System programming for uploading the program
 3 Timer/counters
 SPI, UART, PWM

The Keil µVision icon.

To start writing a new program, you need to create a new project. Navigate to project
—> New µVision project. Then save the new project in a folder.

After saving the file, a new window will pop up asking you to select your microcontroller.
As discussed, we are using AT89C51/AT89C51ED2/AT89C52, so select this controller
under the Microchip section (as Atmel is now a part of Microchip).
Select ‘Yes’ in the next pop-up, as we do not need this file in our project.

Our project workspace is now ready!

From here, we need to create a file where we can write our C code. Navigate to File —
> New. Once the file is created, save it with .c extension in the same project folder.

Next, we have to add that .c or .asm file to our project workspace. Select Add Existing
Files and then select the created .c or .asm file to get it added.
The workspace and project file are ready.

PROCEDURE:

1. Create a new project, go to “Project” and close the current project “Close Project”.

2. Next Go to the Project New μVision Project.

3. Create a New Project Select Device for the Target.

4. Select the device AT89C51ED2 or AT89C51 or AT89C52

5. Add Startup file Next go to “File” and click “New”.

6. Write a program on the editor window and save it with .asm extension.

7. Add this source file to Group and click on “Build Target” or F7.

8. Go to debugging mode to see the result of the simulation by clicking Run or Step

run.
PROGRAM:
#include<REG51.h> int
i,j;
sbit LED = P2^0; void
main()
{
while(1)
{
LED = 0;
for(j=0;j<10000;j++);
LED = 1;
for(j=0;j<10000;j++);
}
}

OUTPUT:

RESULT:

Thus the basic embedded C program to control a port 0 pin 0 connected to an

8051microcontroller using a Keil simulator has been executed successfully.
 EXP NO: 4b
ARITHMETIC PROGRAMS USING EMBEDDED C
DATE

AIM:
To write an embedded C program for addition, subtraction, multiplication, and
division using the Keil simulator.

SOFTWARE REQUIRED:

S.No Software Requirements Quantity

1 Keil μvision5 IDE 1

PROCEDURE
1. Create a new project, go to “Project” and close the current project “Close Project”.

2. Next Go to the Project New μvision Project.

3. Create New Project Select Device for Target.

4. Select the device AT89C51ED2 or AT89C51 or AT89C52

5. Add Startup file Next go to “File” and click “New”.

6. Write a program on the editor window and save it with the .asm extension.

7. Add this source file to Group and click on “Build Target” or F7.

8. Go to debugging mode to see the result of the simulation by clicking Run or Step

run.

PROGRAM:
#include<REG51.H>
unsigned char a, b; void
main()
{
a=0x10;
b=0x04;
P0=a-b;
P1=a+b;
P2=a*b;
P3=a/b;
while(1);
}

OUTPUT:

Port P0=
Port P1=
Port P2=
Port P3=

RESULT:
Thus arithmetic ( addition, subtraction, multiplication and division) program using
embedded C has been executed successfully.
EXP NO: 5a
INTRODUCTION TO THE ARDUINO PLATFORM
DATE

AIM:
To study the basics of Arduino Uno board and Arduino IDE 2.0 software.

Hardware & SOFTWARE TOOLS REQUIRED:

S.No. Hardware & Software Requirements Quantity

1 Arduino IDE 2.0 1
2 Arduino Uno Board 1

INTRODUCTION TO ARDUINO:

Arduino is a project, open-source hardware, and software platform used to design and
build electronic devices. It designs and manufactures microcontroller kits and single-
board interfaces for building electronics projects. The Arduino boards were initially
created to help students with the non-technical background. The designs of Arduino
boards use a variety of controllers and microprocessors. Arduino is an easy-to-use open
platform for creating electronic projects. Arduino boards play a vital role in creating
different projects. It makes electronics accessible to non-engineers, hobbyists, etc.
The various components present on the Arduino boards are a Microcontroller, Digital
Input/output pins, USB Interface and Connector, Analog Pins, reset buttons, Power
buttons, LEDs, Crystal oscillators, and Voltage regulators. Some components may differ
depending on the type of board. The most standard and popular board used over time is
Arduino UNO. The ATmega328 Microcontroller present on the UNO board makes it
rather powerful than other boards. There are various types of Arduino boards used for
different purposes and projects. The Arduino Boards are organized using the Arduino
(IDE), which can run on various platforms. Here, IDE stands for Integrated
Development Environment. Let's discuss some common and best Arduino boards.
TYPES OF ARDUINO BOARDS
1) Arduino UNO

Arduino UNO is based on an ATmega328P microcontroller. It is easy to use compared

to other boards, such as the Arduino Mega board, etc. The Arduino UNO includes 6
analog pin inputs, 14 digital pins, a USB connector, a power jack, and an ICSP (In-
Circuit Serial Programming) header. It is the most used and of standard form from the
list of all available Arduino Boards.

2) Arduino Nano

The Arduino Nano is a small Arduino board based on ATmega328P or ATmega628

Microcontroller. The connectivity is the same as the Arduino UNO board. The Nano
board is defined as a sustainable, small, consistent, and flexible microcontroller board. It
is small in size compared to the UNO board. The devices required to start our projects
using the Arduino Nano board are Arduino IDE and mini- USB. The Arduino Nano
includes an I/O pin set of 14 digital pins and 8 analog pins. It also includes 6 Power pins
and 2 Reset pins.

3) Arduino Mega

The Arduino Mega is based on the ATmega2560 Microcontroller. The ATmega2560 is

an 8-bit microcontroller. We need a simple USB cable to connect to the computer and
the AC to DC adapter or battery to get started with it. It has the advantage of working
with more memory space. The Arduino Mega includes 54 I/O digital pins and 16
Analog Input/Output (I/O), ICSP header, a reset button, 4 UART (Universal
Asynchronous Reciever/Transmitter) ports, USB connection, and a power jack.

4) Arduino Micro
The Arduino Micro is based on the ATmega32U4 Microcontroller. It consists of 20 sets
of pins. The 7 pins from the set are PWM (Pulse Width Modulation) pins, while 12 pins
are analog input pins. The other components on board are a reset button, a 16MHz
crystal oscillator, an ICSP header, and a micro-USB connection. The USB is built in the
Arduino Micro board.

5) Arduino Leonardo

The basic specification of the Arduino Leonardo is the same as the Arduino Micro. It is
also based on the ATmega32U4 Microcontroller. The components present on the board
are 20 analog and digital pins, a reset button, a 16MHz crystal oscillator, an ICSP header,
and a micro USB connection.

6) Arduino Due
The Arduino Due is based on the 32-bit ARM core. It is the first Arduino board that has
been developed based on the ARM Microcontroller. It consists of 54 Digital
Input/Output pins and 12 Analog pins. The Microcontroller present on the board is the
Atmel SAM3X8E ARM Cortex-M3 CPU. It has two ports, namely, a native USB port
and a Programming port. The micro side of the USB cable should be attached to the
programming port.
7) Arduino Lilypad

The Arduino LilyPad was initially created for wearable projects and e-textiles. It is
based on the ATmega168 Microcontroller. The functionality of Lilypad is the same as
other Arduino Boards. It is a round, lightweight board with a minimal number of
components to keep the size of the board small. The Arduino Lilypad board was designed
by Sparkfun and Leah. It was developed by Leah Buechley. It has 9 digital I/O pins.

8) Arduino Bluetooth

The Arduino Bluetooth board is based on ATmega168 Microcontroller. It is also named

as Arduino BT board. The components present on the board are 16 digital pins, 6
analog pins, reset button, 16MHz crystal oscillator, ICSP header, and screw terminals.
The screw terminals are used for power. The Arduino Bluetooth Microcontroller board
can be programmed over the Bluetooth as a wireless connection.

9) Arduino Diecimila

The Arduino Diecimila is also based on the ATmeg628 Microcontroller. The board
consists of 6 analog pin inputs, 14 digital Input/Output pins, a USB connector, a power
jack, an ICSP (In-Circuit Serial Programming) header, and a reset button. We can
connect the board to the computer using the USB and can power on the board with the
help of an AC to DC adapter. The Diecimila was initially developed to mark the 10000
delivered boards of Arduino. Here, Diecimila means 10,000 in Italian.
10) Arduino Robot

The Arduino Robot is called as the tiny computer. It is widely used in robotics. The board
comprises of the speaker, five-button, color screen, two motors, an SD card reader, a
digital compass, two potentiometers, and five floor sensors. The Robot Library can be
used to control the actuators and the sensors.

11) Arduino Ethernet

The Arduino Ethernet is based on the ATmega328 Microcontroller. The board consists
of 6 analog pins, 14 digital I/O pins, crystal oscillator, reset button, ICSP header, a
power jack, and an RJ45 connection. With the help of the Ethernet shield, we can
connect our Arduino board to the internet.

12) Arduino Zero

The Arduino Zero is generally called as the 32-bit extension of the Arduino UNO. It is
based on ATmel's SAM21 MCU. The board consists of 6 analog pin inputs, 14 digital
Input/Output pins, a USB connector, a power jack, and an ICSP (In-Circuit Serial
Programming) header, UART port pins, a power header, and AREF button. The
 Embedded debugger of Atmel is also supported by the Arduino Zero. The function of
Debugger is to provide a full debug interface, which does not require additional
hardware.

13) Arduino Esplora

The Arduino Esplora boards allow easy interfacing of sensors and actuators. The outputs
and inputs connected on the Esplora board make it unique from other types of Arduino
boards. The board includes outputs, inputs, a small microcontroller, a microphone, a
sensor, a joystick, an accelerometer, a temperature sensor, four buttons, and a slider.

14) Arduino Pro Micro

The structure of Arduino Pro Micro is similar to the Arduino Mini board, except the
Microcontroller ATmega32U4. The board consists of 12 digital Input/output pins, 5
PWM (Pulse Width Modulation) pins, Tx and Rx serial connections, and 10-bit ADC
(Analog to Digital Converter).

INTRODUCTION TO ARDUINO UNO:

The Arduino UNO is a standard board of Arduino. Here UNO means 'one' in Italian. It
was named UNO to label the first release of Arduino Software. It was also the first USB
board released by Arduino. It is considered a powerful board used in various projects.
Arduino. cc developed the Arduino UNO board. Arduino UNO is based on an
ATmega328P microcontroller. It is easy to use compared to other boards, such as the
Arduino Mega board, etc. The board consists of digital and analog Input/Output pins (I/O),
shields, and other circuits. The Arduino UNO includes 6 analog pin inputs, 14 digital pins,
a USB connector, a power jack, and an ICSP (In-Circuit Serial Programming) header. It is
programmed based on IDE, which stands for Integrated Development Environment. It can
run on both online and offline platforms. The IDE is common to all available boards of
Arduino.

The Arduino board is shown below:

The components of Arduino UNO board are shown below:

Let's discuss each component in detail.

 ATmega328 Microcontroller- It is a single-chip Microcontroller of the ATmel

family. The processor code inside it is of 8-bit. It combines Memory (SRAM,
EEPROM, and Flash), Analog to Digital Converter, SPI serial ports, I/O
lines, registers, timers, external and internal interrupts, and oscillator.
 ICSP pin - The In-Circuit Serial Programming pin allows the user to program
using the firmware of the Arduino board.
  Power LED Indicator- The ON status of the LED shows the power is activated.
When the power is OFF, the LED will not light up.
 Digital I/O pins- The digital pins have the value HIGH or LOW. The pins
numbered from D0 to D13 are digital pins.
 TX and RX LED's- The successful flow of data is represented by the lighting of
these LED's.
 AREF- The Analog Reference (AREF) pin is used to feed a reference voltage to
the Arduino UNO board from the external power supply.
 Reset button- It is used to add a Reset button to the connection.
 USB- It allows the board to connect to the computer. It is essential for the
programming of the Arduino UNO board.
 Crystal Oscillator- The Crystal oscillator has a frequency of 16MHz, which makes
the Arduino UNO a powerful board.
 Voltage Regulator- The voltage regulator converts the input voltage to 5V.
 GND- Ground pins. The ground pin acts as a pin with zero voltage.
 Vin- It is the input voltage.
 Analog Pins- The pins numbered from A0 to A5 are analog pins. The function of
Analog pins is to read the analog sensor used in the connection. It can also act as
GPIO (General Purpose Input Output) pin.

TECHNICAL SPECIFICATIONS OF ARDUINO UNO

The technical specifications of the Arduino UNO are listed below:
o There are 20 Input/Output pins present on the Arduino UNO board. These 20 pins
include 6 PWM pins, 6 analog pins, and 8 digital I/O pins.
o The PWM pins are Pulse Width Modulation capable.
o The crystal oscillator present in Arduino UNO comes with a frequency of 16MHz.
o It also has an Arduino-integrated WIFI module. Such Arduino UNO board is
based on the Integrated WIFI ESP8266 Module and ATmega328P microcontroller.
o The input voltage of the UNO board varies from 7V to 20V.
o Arduino UNO automatically draws power from the external power supply. It can
also draw power from the USB.
ARDUINO UNO PINOUT
The Arduino UNO is a standard board of Arduino, which is based
on an ATmega328P microcontroller. It is easier to use than other types of Arduino
Boards.
The Arduino UNO Board, with the specification of pins, is shown below:
Let's discuss each pin in detail.
ATmega328 Microcontroller- It is a single chip Microcontroller of the ATmel family.
The processor core inside it is of 8-bit. It is a low-cost, low powered, and a simple
microcontroller. The Arduino UNO and Nano models are based on the ATmega328
Microcontroller.
Voltage Regulator: The voltage regulator converts the input voltage to 5V. The primary
function of voltage regulator is to regulate the voltage level in the Arduino board. For
any changes in the input voltage of the regulator, the output voltage is constant and
steady.
GND - Ground pins. The ground pins are used to ground the circuit.
TXD and RXD: TXD and RXD pins are used for serial communication. The TXD is
used for transmitting the data, and RXD is used for receiving the data. It also represents
the successful flow of data.

USB Interface: The USB Interface is used to plug-in the USB cable. It allows the board
to connect to the computer. It is essential for the programming of the Arduino UNO
board.
RESET: It is used to add a Reset button to the connection.
SCK: It stands for Serial Clock. These are the clock pulses, which are used to
synchronize the transmission of data.
MISO: It stands for Master Input/ Slave Output. The save line in the MISO pin is
used to send the data to the master.
VCC: It is the modulated DC supply voltage, which is used to regulate the IC's used in
the connection. It is also called as the primary voltage for IC's present on the Arduino
board. The Vcc voltage value can be negative or positive with respect to the GND pin.
Crystal Oscillator- The Crystal oscillator has a frequency of 16MHz, which makes the
Arduino UNO a powerful board.
ICSP: It stands for In-Circuit Serial Programming. The users can program the
Arduino board's firmware using the ICSP pins. The program or firmware with the
advanced functionalities is received by microcontroller with the help of the ICSP header.
The ICSP header consists of 6 pins.
The structure of the ICSP header is shown below:

SDA: It stands for Serial Data. It is a line used by the slave and master to send and
receive data. It is called as a data line, while SCL is called as a clock line.
SCL: It stands for Serial Clock. It is defined as the line that carries the clock data. It is
used to synchronize the transfer of data between the two devices. The Serial Clock is
generated by the device and it is called as master.
SPI: It stands for Serial Peripheral Interface. It is popularly used by the
microcontrollers to communicate with one or more peripheral devices quickly. It uses
conductors for data receiving, data sending, synchronization, and device selection (for
communication).
MOSI: It stands for Master Output/ Slave Input. The MOSI and SCK are driven by the
Master.
SS: It stands for Slave Select. It is the Slave Select line, which is used by the master. It
acts as the enable line. I2C: It is the two-wire serial communication protocol. It stands for
Inter Integrated Circuits. The I2C is a serial communication protocol that uses SCL (Serial
Clock) and SDA (Serial Data) to receive and send data between two devices.
INTRODUCTION TO ARDUINO IDE 2.0:

The Arduino IDE 2.0 is an open-source project, currently in its beta-phase. It is a big
step from it's sturdy predecessor, Arduino IDE 2.0, and comes with revamped UI,
improved board & library manger, autocomplete feature and much more.
In this tutorial, we will go through step by step, how to download and install the software.
Download the editor
Downloading the Arduino IDE 2.0 is done through the Arduino Software page. Here
you will also find information on the other editors available to use.

Requirements
 Windows - Win 10 and newer, 64 bits
 Linux - 64 bits
 Mac OS X - Version 10.14: "Mojave" or newer, 64 bits

Installation
Windows
Download URL: https://www.arduino.cc/en/software
To install the Arduino IDE 2.0 on a Windows computer, simply run the file
downloaded from the software page.

Follow the instructions in the installation guide. The installation may take several minutes.
 You can now use the Arduino IDE 2.0 on your windows computer!

How to use the board manager with the Arduino IDE 2.0
The board manager is a great tool for installing the necessary cores to use your Arduino
boards. In this quick tutorial, we will take a look at how to install one, and choosing the
right core for your board!
Requirements
 Arduino IDE 2.0 installed.
Why use the board manager?
The board manager is a tool that is used to install different cores on your local computer.
So what is a core, and why is it necessary that I install one?
Simply explained, a core is written and designed for specific microcontrollers. As
Arduino have several different types of boards, they also have different type of
microcontrollers.

For example, an Arduino UNO has an ATmega328P, which uses the AVR core, while an
Arduino Nano 33 IoT has a SAMD21 microcontroller, where we need to use the SAMD
core.
In conclusion, to use a specific board, we need to install a specific core.
Installing a core
Installing a core is quick and easy, but let's take a look at what we need to do.
1. Open the Arduino IDE 2.0.
2. With the editor open, let's take a look at the left column. Here, we can see a

couple of icons. Let's click the on the "computer chip" icon.

1. A list will now appear of all available cores. Now let's say we are using an

Nano 33 IoT board, and we want to install the core. Simply enter the name in the
search field, and the right core (SAMD) will appear, where the Nano 33 IoT
features in the description. Click on the "INSTALL" button.

4. This will begin an installation process, which in some cases may take several minutes.
 5. When it is finished, we can take a look at the core in the boards manager column,

where it should say "INSTALLED".

You have now successfully downloaded and installed a core on your machine, and you
can start using your Arduino board!

How to upload a sketch with the Arduino IDE 2.0

In the Arduino environment, we write sketches that can be uploaded to Arduino boards.
In this tutorial, we will go through how to select a board connected to your computer,
and how to upload a sketch to that board, using the Arduino IDE 2.0.
Requirements
 Arduino IDE 2.0 installed.
Verify VS Upload
There are two main tools when uploading a sketch to a board: verify and upload. The
verify tool simply goes through your sketch, checks for errors and compiles it. The
upload tool does the same, but when it finishes compiling the code, it also uploads it to
the board.
A good practice is to use the verifying tool before attempting to upload anything. This is
a quick way of spotting any errors in your code, so you can fix them before actually
uploading the code. Uploading a sketch
Installing a core is quick and easy, but let's take a look at what we need to do.
1. Open the Arduino IDE 2.0.
2. With the editor open, let's take a look at the navigation bar at the top. At the very

left, there is a checkmark and an arrow pointing right. The checkmark is used
to verify, and the arrow is used to upload.
3. Click on the verify tool (checkmark). Since we are verifying an empty sketch, we

can be sure it is going to compile. After a few seconds, we can see the result of the
action in the console (black box in the bottom).

1. Now we know that our code is compiled, and that it is working. Now, before we
can upload the code to our board, we will first need to select the board that we are
using. We can do this by navigating to Tools > Port > {Board}. The board(s) that
are connected to your computer should appear here, and we need to select it by
clicking it. In this case, our board is displayed as COM44 (Arduino UNO).
 5. With the board selected, we are good to go! Click on the upload button, and it

will start uploading the sketch to the board.

6. When it is finished, it will notify you in the console log. Of course, sometimes

there are some complications when uploading, and these errors will be listed here
as well.

you have now uploaded a sketch to your Arduino board!

How to install and use a library with the Arduino IDE 2.0
A large part of the Arduino programming experience is the use of libraries. Thousands
of libraries can be found online, and the best-documented ones can be found and
installed directly through the editor. In this tutorial, we will go through how to install a
library using the library manager in the Arduino IDE 2.0. We will also show how to
access examples from a library that you have installed. Requirements
 Arduino IDE 2.0 installed.
Why use libraries?
Libraries are incredibly useful when creating a project of any type. They make our
development experience much smoother, and there almost an infinite amount out there.
They are used to interface with many different sensors, RTCs, Wi-Fi modules, RGB
matrices and of course with other components on your board.
Arduino has many official libraries, but the real heroes are the Arduino community, who
develop, maintain and improve their libraries on a regular basis.
Installing a library
Installing a library is quick and easy, but let's take a look at what we need to do.
1. Open the Arduino IDE 2.0.
2. With the editor open, let's take a look at the left column. Here, we can see a

couple of icons. Let's click the on the "library" icon.

3. A list will now appear of all available libraries, where we can also search for the

library we want to use. In this example, we are going to install the RTCZero
library. Click on the "INSTALL" button to install the library.

4. This process should not take too long, but allow up to a minute to install it.
 5. When it is finished, we can take a look at the library in the library manager

column, where it should say "INSTALLED".

You have now successfully downloaded and installed a library on your machine.

4Including a library
To use a library, you first need to include the library at the top of the sketch.

Almost all libraries come with already made examples that you can use. These are
accessible through File > Examples > {Library} > {Example}. In this example,
we are choosing the RTCZero > SimpleRTC.
The chosen example will now open up in a new window, and you can start using it
however you want to.

RESULT:

Thus the study of Arduino Platform has been done and ensured its composition with internal
features specifically.
 EXP NO: 5b
INTRODUCTION TO ARDUINO PROGRAMMING
DATE

AIM:
To write and execute different Arduino programming for LED blinking

HARDWARE & SOFTWARE TOOLS REQUIRED:

S.No Hardware & Software Requirements Quantity

1 Arduino IDE 2.0 1
2 LED (any color)
2 Arduino UNO Development Board 1
3 Jumper Wires few
4 Arduino USB Cable 1

5 Resistors 1

CONNECTIONS :

1. Connect the longer leg (anode) of the LED to a digital pin on the Arduino (e.g.,

pin 13).
2. Connect the shorter leg (cathode) of the LED to one leg of the resistor.

3. Connect the other leg of the resistor to the ground (GND) pin on the Arduino.

4. Connect the Arduino board to your computer using a USB cable

PROCEDURE:
1. Launch the Arduino IDE on your computer.

2. Go to "File" -> "New" to create a new sketch.

3. Type the corresponding code into the Arduino IDE

4. Click the checkmark icon (Verify) to check for any errors.

5. If there are no errors, click the right arrow icon (Upload) to upload the code to

your Arduino board.

6. Once the code is uploaded, you should see the LED connected to pin 13 on your

Arduino board blinking on and off with a 1-second interval

PROGRAM:

// Define the pin number for the LED

const int ledPin = 13;

// Setup function runs once when the Arduino is powered on or reset

void setup() {
 // Initialize the digital pin as an output

pinMode(ledPin, OUTPUT);

// Loop function runs repeatedly after the setup function

void loop() {

// Turn the LED on

digitalWrite(ledPin, HIGH);

// Wait for 1 second

delay(1000);

// Turn the LED off

digitalWrite(ledPin, LOW);

// Wait for another 1 second

delay(1000);

OUTPUT:

RESULT:

Thus the LED blinking with Arduino has been verified and observed the output successfully.
EXP NO: 6 Different communication methods with IoT devices
DATE (Zigbee, GSM, Bluetooth)

AIM:
To Explore different communication methods with IoT devices (Zigbee, GSM,
Bluetooth).

DIFFERENT COMMUNICATION METHODS:

IoT devices require reliable and efficient communication methods to transmit data and
interact with other devices or systems. Here are three commonly used communication
methods for IoT devices:

Zigbee:
Zigbee is a low-power wireless communication protocol designed for short-range
communication between devices. It operates on the 2.4 GHz frequency band and
supports mesh networking, allowing devices to communicate with each other through
intermediate nodes. Zigbee is commonly used in home automation, industrial control,
and smart energy applications.

GSM (Global System for Mobile Communications):

GSM is a widely used cellular network technology that enables IoT devices to
connect to the internet using SIM cards. It operates on various frequency bands and
provides wide coverage, making it suitable for applications that require long-range
communication. GSM is commonly used in applications such as asset tracking, remote
monitoring, and smart cities.

Bluetooth:
Bluetooth is a short-range wireless communication technology that operates on the
2.4 GHz frequency band. It is commonly used for connecting IoT devices to
smartphones, tablets, and other nearby devices. Bluetooth Low Energy (BLE) is a
power-efficient version of Bluetooth that is ideal for battery-powered IoT devices.
Bluetooth is widely used in applications such as wearable devices, healthcare monitoring,
and home automation.

Each communication method has its advantages and limitations, and the choice
depends on the specific requirements of the IoT application. Factors to consider include
range, power consumption, data rate, security, and interoperability with other devices or
systems.
RESULT:

Thus the study of different communication methods with IOT has been done and ensured its
composition with internal features specifically.
 EXP NO: 6a
BLUETOOTH COMMUNICATION
DATE

AIM:
To write a program to control an LED using a Bluetooth module.

HARDWARE & SOFTWARE TOOLS REQUIRED:

S.No Hardware & Software Requirements Quantity

1 Arduino IDE 2.0 1
2 Arduino UNO Development Board 1
3 Jumper Wires few
4 Arduino USB Cable 1

5 HC-05 Bluetooth Module 1

CONNECTIONS:

Arduino UNO Pin Bluetooth Module Arduino Development Board

VCC 5V -
GND GND -
2 Tx -
3 Rx -
4 - LED

PROGRAM:

#include<SoftwareSerial.h>
SoftwareSerial mySerial(2,3); //rx,tx
void setup() { mySerial.begin(9600);
Serial.begin(9600);
pinMode(4, OUTPUT);
}

void loop()
{ if(mySerial.available()>0)
{
char data=mySerial.read();
Serial.println(data);
if(data=='1'){ digitalWrite(4,HIGH);
Serial.println("LED ON");
}
 else
if(data=='2'){ digitalWrite(4,LOW)
; Serial.println("LED OFF");
}
}
}

RESULT:

Thus the program to control an LED using a Bluetooth module has been verified and
executed successfully.
 EXP NO: 6b
ZIGBEE COMMUNICATION
DATE

AIM:
To write a program to control an LED using a Zigbee module.

HARDWARE & SOFTWARE TOOLS REQUIRED:

S.No Hardware & Software Requirements Quantity

1 Arduino IDE 2.0 1
2 Arduino UNO Development Board 2
3 Jumper Wires few
4 Arduino USB Cable 2

5 Zigbee Module 2

CONNECTIONS:

TRANSMITTER:

Arduino UNO Pin Zigbee Module

VCC 5V
GND G
2 Tx
3 Rx
PROGRAM:
TRANSMITTER SIDE:

#include<SoftwareSerial.h>
SoftwareSerial mySerial(2,3); //rx,tx
void setup() {
mySerial.begin(9600);
Serial.begin(9600);
}

void loop() {
mySerial.write('A');
Serial.println('A');
delay(100);
mySerial.write('B');
Serial.println('B');
delay(100);
}
 CONNECTIONS:

RECEIVER:
Arduino UNO Pin Zigbee Module Arduino Development Board
- 5V 5V
- G GND
2 Tx -
3 Rx -
4 - LED1

RECEIVER SIDE:

#include<SoftwareSerial.h>
SoftwareSerial mySerial(2,3); //rx,tx
void setup() {
mySerial.begin(9600);
Serial.begin(9600); pinMode(4,
OUTPUT);
}

void loop()
{ if(mySerial.available()>0)
{
char data=mySerial.read();
Serial.println(data);
if(data=='A')
digitalWrite(4,HIGH); else
if(data=='B')
digitalWrite(4,LOW);
}
}

RESULT:
Thus the program to control an LED using a Zigbee module has been verified and executed
successfully.
EXP NO: 7a INTRODUCTION TO THE RASPBERRY PI
DATE PLATFORM

Introduction to Raspberry Pi Pico W:

The Raspberry Pi Pico W is a compact and affordable microcontroller board developed by the
Raspberry Pi Foundation. Building upon the success of the Raspberry Pi Pico, the Pico W variant
brings wireless connectivity to the table, making it an even more versatile platform for embedded
projects. In this article, we will provide a comprehensive overview of the Raspberry Pi Pico W,
highlighting its key features and capabilities.
Features:
 RP2040 microcontroller with 2MB of flash memory
 On-board single-band 2.4GHz wireless interfaces (802.11n)
 Micro USB B port for power and data (and for reprogramming the flash)
 40 pins 21mmx51mm ‘DIP’ style 1mm thick PCB with 0.1″ through-hole pins also with edge
castellations
 Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
 23 GPIO are digital-only, with three also being ADC-capable
 Can be surface mounted as a module
 3-pin ARM serial wire debug (SWD) port
 Simple yet highly flexible power supply architecture
 Various options for easily powering the unit from micro-USB, external supplies, or batteries
 High quality, low cost, high availability
 Comprehensive SDK, software examples, and documentation
 Dual-core Cortex M0+ at up to 133MHz
 On-chip PLL allows variable core frequency
 264kByte multi-bank high-performance SRAM

Raspberry Pi Pico W:
The Raspberry Pi Pico W is based on the RP2040 microcontroller, which was designed by Raspberry Pi
in-house. It combines a powerful ARM Cortex-M0+ processor with built-in Wi-Fi connectivity,
opening up a range of possibilities for IoT projects, remote monitoring, and wireless communication.
The Pico W retains the same form factor as the original Pico, making it compatible with existing Pico
accessories and add-ons.
RP2040 Microcontroller:
At the core of the Raspberry Pi Pico W is the RP2040 microcontroller. It features a dual-core ARM
Cortex-M0+ processor running at 133MHz, providing ample processing power for a wide range of
applications. The microcontroller also includes 264KB of SRAM, which is essential for storing and
manipulating data during runtime. Additionally, the RP2040 incorporates 2MB of onboard flash
memory for program storage, ensuring sufficient space for your code and firmware.

Wireless Connectivity:
The standout feature of the Raspberry Pi Pico W is its built-in wireless connectivity. It includes an
onboard Cypress CYW43455 Wi-Fi chip, which supports dual-band (2.4GHz and 5GHz) Wi-Fi
802.11b/g/n/ac. This allows the Pico W to seamlessly connect to wireless networks, communicate with
other devices, and access online services. The wireless capability opens up new avenues for IoT projects,
remote monitoring and control, and real-time data exchange.

GPIO and Peripherals:

Similar to the Raspberry Pi Pico, the Pico W offers a generous number of GPIO pins, providing
flexibility for interfacing with external components and peripherals. It features 26 GPIO pins, of which
3 are analog inputs, and supports various protocols such as UART, SPI, I2C, and PWM. The Pico W
also includes onboard LED indicators and a micro-USB port for power and data connectivity.

MicroPython and C/C++ Programming:

The Raspberry Pi Pico W can be programmed using MicroPython, a beginner-friendly programming
language that allows for rapid prototyping and development. MicroPython provides a simplified syntax
and high-level abstractions, making it easy for newcomers to get started. Additionally, the

Pico W is compatible with C/C++ programming, allowing experienced developers to leverage the rich
ecosystem of libraries and frameworks available.

Programmable Input/Output (PIO) State Machines:

One of the unique features of the RP2040 microcontroller is the inclusion of Programmable
Input/Output (PIO) state machines. These state machines provide additional processing power and
flexibility for handling real-time data and timing-critical applications. The PIO state machines can be
programmed to interface with custom protocols, generate precise waveforms, and offload tasks from
the main processor, enhancing the overall performance of the system.

Open-Source and Community Support

As with all Raspberry Pi products, the Pico W benefits from the vibrant and supportive Raspberry Pi
community. Raspberry Pi provides extensive documentation, including datasheets, pinout diagrams, and
programming guides, to assist developers in understanding the board’s capabilities. The community
offers forums, online tutorials, and project repositories, allowing users to seek help, share knowledge,
and collaborate on innovative projects.

The Raspberry Pi Pico W brings wireless connectivity to the popular Raspberry Pi Pico microcontroller
board. With its powerful RP2040 microcontroller, built-in Wi-Fi chip, extensive GPIO capabilities, and
compatibility with MicroPython and C/C++ programming, the Pico W offers a versatile and affordable
platform for a wide range of embedded projects. Whether you are a

RESULT:
Thus the study of Raspberry Pi has been done and ensured its composition with internal
features specifically.
EXP NO: 7b
INTRODUCTION TO PYTHON PROGRAMMING
DATE

Getting Started with Thonny MicroPython (Python) IDE:

If you want to program your ESP32 and ESP8266 with MicroPython firmware, it’s very handy to use
an IDE. you’ll have your first LED blinking using MicroPython and Thonny IDE.

What is MicroPython?
MicroPython is a Python 3 programming language re-implementation targeted for microcontrollers and
embedded systems. MicroPython is very similar to regular Python. Apart from a few exceptions, the
language features of Python are also available in MicroPython. The most significant difference between
Python and MicroPython is that MicroPython was designed to work under constrained conditions.
Because of that, MicroPython does not come with the entire pack of standard libraries. It only includes
a small subset of the Python standard libraries, but it includes modules to easily control and interact with
the GPIOs, use Wi-Fi, and other communication protocols.

Thonny IDE:
Thonny is an open-source IDE which is used to write and upload MicroPython programs to different
development boards such as Raspberry Pi Pico, ESP32, and ESP8266. It is extremely interactive and
easy to learn IDE as much as it is known as the beginner-friendly IDE for new programmers. With the
help of Thonny, it becomes very easy to code in Micropython as it has a built-in debugger that helps to
find any error in the program by debugging the script line by line.

You can realize the popularity of Thonny IDE from this that it comes pre-installed in Raspian OS
which is an operating system for a Raspberry Pi. It is available to install on r Windows, Linux, and
Mac OS.
A) Installing Thonny IDE – Windows PC
Thonny IDE comes installed by default on Raspbian OS that is used with the Raspberry Pi board. To
install Thonny on your Windows PC, follow the next instructions:
1. Go to https://thonny.org
2. Download the version for Windows and wait a few seconds while it downloads.

4. Follow the installation wizard to complete the installation process. You just need to click “Next”.
5. After completing the installation, open Thonny IDE. A window as shown in the following figure
should open.

CONNECTIONS:

Raspberry Pi Pico Raspberry Pi Pico

Pin Development Board
GP16 LED
PROGRAM

LED:
from machine import Pin
import time
LED = Pin(16, Pin.OUT)
while True:
LED.value(1)
time.sleep(1)
LED.value(0)
time.sleep(1)

CONNECTIONS:

Raspberry Pi Pico Raspberry Pi Pico

Pin Development Board
(RGB)
GP16 R
GP17 G
GP18 B
GND COM

RGB:
from machine import Pin
from time import sleep_ms,sleep
r=Pin(16,Pin.OUT) y=Pin(17,Pin.OUT)
g=Pin(18,Pin.OUT)

while True: r.value(1)

sleep_ms(1000)
r.value(0)
sleep_ms(1000)
y.value(1) sleep(1)
y.value(0) sleep(1)
g.value(1) sleep(1)
g.value(0) sleep(1)
CONNECTIONS:

Raspberry Pi Pico Raspberry Pi Pico

Pin Development Board
GP16 LED
GP15 SW1

SWITCH CONTROLLED LED:

from machine import Pin from
time import sleep
led=Pin(16,Pin.OUT)
sw=Pin(15,Pin.IN)
while True:
bt=sw.value() if
bt== True:
print("LED ON")
led.value(1) sleep(2)
led.value (0) sleep(2)
led.value (1) sleep(2)
led.value(0) sleep(2)
else:
print("LED OFF")
sleep(0.5)

RESULT:

Thus the study of Python programming has been done and ensured its composition with
internal features specifically.
EXP NO: 8
INTERFACING SENSORS WITH RASPBERRY PI
DATE

AIM:
To interface the IR sensor and Ultrasonic sensor with Raspberry Pico.

HARDWARE & SOFTWARE TOOLS REQUIRED:

S.No Hardware & Software Requirements Quantity

1 Thonny IDE 1
2 Raspberry Pi Pico Development Board 1
3 Jumper Wires few
4 Micro USB Cable 1

5 IR Sensor 1

6 Ultrasonic sensor 1

CONNECTIONS:

Raspberry Pi Pico Raspberry Pi Pico

IR Sensor Module
Pin Development Board
GP16 BUZZER -
GP15 - OUT
- 5V VCC
- GND GND

PROGRAM:

IR Sensor:
from machine import Pin from
time import sleep
buzzer=Pin(16,Pin.OUT)
ir=Pin(15,Pin.IN)
while True:
ir_value=ir.value() if
ir_value== True:
print("Buzzer OFF")
buzzer.value(0)
else:
print("Buzzer ON")
buzzer.value (1)
sleep(0.5)
 CONNECTIONS:

Raspberry Pi Pico Raspberry Pi Pico

Ultrasonic Sensor Module
Pin Development Board
GP16 BUZZER -
GP15 - ECHO
GP14 - TRIG
- 5V VCC
- GND GND

ULTRASONIC SENSOR:
from machine import Pin, PWM import
utime
trigger = Pin(14, Pin.OUT)
echo = Pin(15, Pin.IN) buzzer
= Pin(16, Pin.OUT)

def measure_distance():
trigger.low()
utime.sleep_us(2)
trigger.high()
utime.sleep_us(5)
trigger.low()
while echo.value() == 0: signaloff =
utime.ticks_us()
while echo.value() == 1: signalon =
utime.ticks_us()

timepassed = signalon - signaloff distance =

(timepassed * 0.0343) / 2 return distance
while True:
dist = measure_distance()
print(f"Distance : {dist} cm") if
dist <= 10:
buzzer.value(1)
utime.sleep(0.01)
else:
buzzer.value(0)
utime.sleep(0.01)
utime.sleep(0.5)

RESULT:

Interfacing the IR sensor and Ultrasonic sensor with Raspberry Pico has been verified and
executed successfully.
 EXP NO: 9 COMMUNICATE BETWEEN ARDUINO AND
DATE RASPBERRY PI

AIM:
To write and execute the program to Communicate between Arduino and Raspberry PI
using any wireless medium (Bluetooth)

HARDWARE & SOFTWARE TOOLS REQUIRED:

S.No Hardware & Software Requirements Quantity

1 Thonny IDE 1
2 Raspberry Pi Pico Development Board 1
3 Arduino Uno Development Board 1
4 Jumper Wires few
5 Micro USB Cable 1
6 Bluetooth Module 2
CONNECTIONS:

Arduino UNO Pin Arduino Development Board Bluetooth Module

2 - Tx
3 - Rx
- GND GND
- 5V 5V

PROGRAM:

MASTER ARDUINO:
#include<SoftwareSerial.h>
SoftwareSerial mySerial(2,3); //rx,tx
void setup() {
mySerial.begin(9600);
}

void loop() {
mySerial.write('A');
delay(1000);
mySerial.write('B');
delay(1000);
}
 CONNECTIONS:

Raspberry Pi Pico Raspberry Pi Pico

Bluetooth Module
Pin Development Board
GP16 LED -
VCC - +5V
GND - GND
GP1 - Tx
GP0 - Rx

SLAVE
RASPBERRY PI PICO
from machine import Pin, UART uart =
UART(0, 9600)
led = Pin(16, Pin.OUT)

while True:
if uart.any() > 0:
data = uart.read()
print(data)
if "A" in data: led.value(1)
print('LED on \n')
uart.write('LED on \n')
elif "B" in data: led.value(0)
print('LED off \n')
uart.write('LED off \n')

RESULT:
Thus the program to Communicate between Arduino and Raspberry PI using any wireless
medium (Bluetooth) has been verified and executed successfully.
EXP NO: 10
CLOUD PLATFORM TO LOG THE DATA
DATE

AIM:
To set up a cloud platform to log the data from IoT devices.

HARDWARE & SOFTWARE TOOLS REQUIRED:

S.No. Software Requirements Quantity

1 Blynk Platform 1

CLOUD PLATFORM-BLYNK:

Blynk is a smart platform that allows users to create their Internet of Things applications without the
need for coding or electronics knowledge. It is based on the idea of physical programming & provides a
platform to create and control devices where users can connect physical devices to the Internet and
control them using a mobile app.

Setting up Blynk 2.0 Application

To control the LED using Blynk and Raspberry Pi Pico W, you need to create a Blynk project and
set up a dashboard in the mobile or web application. Here’s how you can set up the dashboard:

Step 1: Visit blynk.cloud and create a Blynk account on the Blynk website. Or you can simply sign in
using the registered Email ID.

Step 2: Click on +New Template.

Step 3: Give any name to the Template such as Raspberry Pi Pico W. Select ‘Hardware Type’ as
Other and ‘Connection Type’ as WiFi.

So a template will be created now.

Step 4: Now we need to add a ‘New Device’ now.

Select a New Device from ‘Template’.

elect the device from a template that you created earlier and also give any name to the device. Click on
Create.

A new device will be created. You will find the Blynk Authentication Token Here. Copy it as it is
necessary for the code.

Step 5: Now go to the dashboard and select ‘Web Dashboard’.

From the widget box drag a switch and place it on the dashboard screen.

Step 6:

On the switch board click on Settings and here you need to set up the Switch. Give any title to it and Create
Datastream as Virtual Pin.

Configure the switch settings as per the image below and click on create.
With this Blynk dashboard set up, you can now proceed to program the Raspberry Pi Pico W board to
control the LED.

Step 7:

To control the LED with a mobile App or Mobile Dashboard, you also need to setup the Mobile Phone
Dashboard. The process is similarly explained above.

Install the Blynk app on your smartphone The Blynk app is available for iOS and Android. Download and
install the app on your smartphone. then need to set up both the Mobile App and the Mobile Dashboard
in order to control the LED with a mobile device. The process is explained above.

1. Open Google Play Store App on an android phone

2. Open Blynk.App
3. Log In to your account (using the same email and password)
4. Switch to Developer Mode
5. Find the “Raspberry Pi Pico Pico W” template we created on the web and tap on it
6. Tap on the “Raspberry Pi Pico Pico W” template (this template automatically comes because we
created it on our dashboard).
7. tap on plus icon on the left-right side of the window
8. Add one button Switch
9. Now We Successfully Created an android template
10. it will work similarly to a web dashboard template

RESULT:

Thus the a cloud platform to log the data from IoT devices has been verified and executed
successfully
 EXP NO: 11 Log Data using Raspberry PI and upload it to the cloud
DATE platform

AIM:
To write and execute the program Log Data using Raspberry PI and upload it to the cloud
platform

HARDWARE & SOFTWARE TOOLS REQUIRED:

S.No Hardware & Software Requirements Quantity

1 Thonny IDE 1
2 Raspberry Pi Pico Development Board few
3 Jumper Wires 1

4 Micro USB Cable 1

CONNECTIONS:

Raspberry Pi Pico Raspberry Pi Pico

LCD Module
Pin Development Board
- 5V VCC
- GND GND
GP0 - SDA
GP1 - SCL

PROGRAM:
from machine import Pin, I2C, ADC
from utime import sleep_ms
from pico_i2c_lcd import I2cLcd import
time
import network
import BlynkLib

adc = machine.ADC(4)
i2c=I2C(0, sda=Pin(0), scl=Pin(1), freq=400000)
I2C_ADDR=i2c.scan()[0]
lcd=I2cLcd(i2c,I2C_ADDR,2,16)

wlan = network.WLAN()
wlan.active(True)
wlan.connect("Wifi_Username","Wifi_Password")

BLYNK_AUTH = 'Your_Token'

# connect the network wait =

10
while wait > 0:
if wlan.status() < 0 or wlan.status() >= 3: break
wait -= 1
print('waiting for connection...')
time.sleep(1)
 # Handle connection error if
wlan.status() != 3:
raise RuntimeError('network connection failed') else:
print('connected')
ip=wlan.ifconfig()[0]
print('IP: ', ip)

"Connection to Blynk" #
Initialize Blynk
blynk = BlynkLib.Blynk(BLYNK_AUTH)

lcd.clear()

while True:
ADC_voltage = adc.read_u16() * (3.3 / (65536))
temperature_celcius = 27 - (ADC_voltage - 0.706)/0.001721
temp_fahrenheit=32+(1.8*temperature_celcius) print("Temperature in
C: {}".format(temperature_celcius)) print("Temperature in F:
{}".format(temp_fahrenheit))

lcd.move_to(0,0)
lcd.putstr("Temp:")
lcd.putstr(str(round(temperature_celcius,2)))
lcd.putstr("C ")
lcd.move_to(0,1)
lcd.putstr("Temp:")
lcd.putstr(str(round(temp_fahrenheit,2)))
lcd.putstr("F")
time.sleep(5)

blynk.virtual_write(3, temperature_celcius)
blynk.virtual_write(4, temp_fahrenheit)
blynk.log_event(temperature_celcius)

blynk.run()

time.sleep(5)

RESULT:

The program for Log Data using Raspberry PI and upload it to the cloud platform has been verified
and executed successfully.
EXP NO: 12
Design an IOT-based system
DATE

AIM:
To design a Smart Home Automation IOT-based system

HARDWARE & SOFTWARE TOOLS REQUIRED:

S.No Hardware & Software Requirements Quantity

1 Thonny IDE 1
2 Raspberry Pi Pico Development Board few
3 Jumper Wires 1

4 Micro USB Cable 1

5 LED or Relay 1

CONNECTIONS:

Raspberry Pi Pico Raspberry Pi Pico

Pin Development Board
GP16 LED 1

PROGRAM:

import time import

network import
BlynkLib
from machine import Pin
led=Pin(16, Pin.OUT)

wlan = network.WLAN()
wlan.active(True)
wlan.connect("Wifi_Username","Wifi_Password")
BLYNK_AUTH = 'Your_Token'
# connect the network wait =
10
while wait > 0:
if wlan.status() < 0 or wlan.status() >= 3: break
wait -= 1
print('waiting for connection...')
time.sleep(1)

# Handle connection error if

wlan.status() != 3:
raise RuntimeError('network connection failed') else:
print('connected')
ip=wlan.ifconfig()[0]
print('IP: ', ip)

"Connection to Blynk" #
Initialize Blynk
blynk = BlynkLib.Blynk(BLYNK_AUTH)

# Register virtual pin handler

@blynk.on("V0") #virtual pin V0
def v0_write_handler(value): #read the value if
int(value[0]) == 1:
led.value(1) #turn the led on else:
led.value(0) #turn the led off
while True:
blynk.run()

RESULT:
The design of an IOT system has been verified and modeled successfully.