Advanced Engineering Materials

UNIT 2 SEMICONDUCTOR
DEVICES

2.1. INTRODUCTION
In the previous chapter we have studied Band theory of solids, Fermi energy concept along with
energy band structure of metals, insulators and semiconductors. Also, the details regarding current
conduction in intrinsic and extrinsic semiconductors and their energy band diagrams at 0K and at
higher temperatures were discussed. One of the important successes of the band theory of solids
was theoretical understanding of semiconductors and their physical properties which we will learn
in this unit.
There are various devices which having wide range of applications in Electronics. All
these devices are based on Semiconductor theory. In this chapter we are going to study Types of
Semiconductor diode, the characteristics and working of devices like P-N junction diode, Tunnel
Diode, Zener Diode, LED and Photodiode and their applications. We will also discuss Hall effect
and its applications, applications of diode as rectifier, types of Transistors and applications of
Transistor as amplifier in CB and CE mode.

2.2. PN JUNCTION DIODE

 A PN junction diode is also known as a semiconductor diode. It is formed when a P-

type and an N-type semiconductor are joined metallurgically.
 It allows current flow in one direction only.
 Hence, it can act as rectifier to convert ac voltage to dc voltage.
 A PN junction diode is schematically represented by the symbol shown in fig.2.1.

Fig2.1: Symbolic representation of PN junction diode

 The arrowhead indicates the conventional direction of current flow when the diode is
forward biased.
 The P-side of the diode is positive and is called anode.
 The N-side is the cathode and is the negative terminal when the diode is forward biased.
 The word ‘diode’ stands for two electrodes- anode and cathode.

2.3. FORMATION OF POTENTIAL BARRIER IN PN JUNCTION DIODE

1
 Advanced Engineering Materials

Fig.2.2: Illustration of depletion region in P-N junction diode

 A PN junction is formed when P-type and N-type semiconductor are joined metallurgically.
The boundary between P-region and N-region is called PN junction.
 In P-region, holes are majority charge carriers and in N-region, electrons are majority
charge carriers. This creates concentration gradient near the junction.
 Therefore, the holes from P-region move towards N-region and electrons from N-
region moves to P-region when PN junction is formed due to concentration gradient.
 When the hole from P-region enters the N-region, it combines with electron over there and
electron -hole pair disappears, this is called recombination process.
 Similarly, when electron from N-region enters the P-region, it is surrounded by large no. of
holes, which leads to recombination process.
 Further, the holes coming out of P-region leave behind negative acceptor ions and
electrons from N-region leaves behind positive donor ions near to the junction.
 This leads to the formation of depletion region. Thus, depletion region is a narrow region
of oppositely charged ions on either side of PN junction which is depleted of mobile
charge carriers (Fig.1).
 These oppositely charged ions produces electric field E directed from N region to P
region at the junction.
 The electric field establishes potential difference Vo at the junction, which act as a
barrier for majority charge carriers to cross the junction, hence called as potential
barrier.

QUE : Explain the formation of depletion region in a pn junction diode.
(3) [Summer-04, 11, 12 &16]
QUE : How is depletion region formed in a junction of the diode. (3) [Winter-
16]
QUE : What is meant by depletion region ? (2) [Summer-17]
QUE : Explain the mechanism of formation of depletion layer in P-N Junction diode.
How does the potential barrier arise in the process? (5) [Winter-09]
QUE : Explain the formation of potentiel barrier across the junction of semiconductor
diode. (3) [Summer-05]

2.3.1. UNBIASED PN-JUNCTION

 When a PN-junction diode is not connected with any external supply it is called as
unbiased.
 Once equilibrium is attained no net current will flow through it, hence diode is at
equilibrium.

2
 Advanced Engineering Materials

 The electric field establishes potential difference Vo at the junction, which act as a barrier
for majority charge carriers to cross the junction.
 The oppositely charged ions produces electric field E at the junction directed as shown in
fig. 2.3(a).

2.3.2. BIASING OF PN-JUNCTION DIODE

 When dc voltage is applied to the diode it is said to be biased.
 A PN-junction diode is biased in two ways:(1) Forward biasing (2) Reverse biasing.
(1) Forward biasing:
 When positive terminal of battery is connected to the P-region and negative terminal of
source (battery) is connected to the N-region, the diode is said to be forward biased.
 If this external applied voltage ‘V’ becomes greater than the value of the potential barrier
Vo, the potential barrier’s opposition will be overcome.
 The width of depletion region reduces.
 The potential barrier reduces by value (Vo – V) as shown in fig.2.3(b).
 Hence majority charge carriers start crossing the junction and large current starts flowing.
 Vo is approx. 0.7 volts for silicon and 0.3 volts for germanium.

(2) Reverse biasing:

 When negative terminal of battery is connected to the P-region and positive terminal of
source (battery) is connected to the N-region, the diode is said to be reverse biased.
 The width of depletion region increases.
 The potential barrier increases to (Vo + V) as shown in fig.2.3(c).
 Hence majority charge carriers are unable to cross the junction.
 The direction of electric field supports the flow of minority charge carriers across the
junction, hence a small amount of current flows.

Fig. 2.3 (a) Unbiased diode(b) Forward biasing (c) Reverse biasing

2.4 DRIFT & DIFFUSION CURRENT

2.4.1. DRIFT CURRENT
 The charge carriers start drifting due to the application of electric field to the
semiconductor and produces drift current.
 For drift current, external electric field is essential.
 Its value depends upon the carrier concentration and external electric field.
 More the temperature, more is the drift current.
DIFFUSION CURRENT
 Due to the concentration gradient in a semiconductor, the charge carriers move from
higher concentration level towards lower concentration level to maintain the equilibrium
and this movement of carriers produces diffusion current.
 For diffusion current, external electric field is not required.
 It depends upon the rate of change of carrier concentration per unit length.

3
 Advanced Engineering Materials

 More the doping more is the diffusion current.

QUE : What is drift and diffusion current ? (2) [Summer-14]

QUE : Explain drift and diffusion current. (2) [Summer-11, Winter-14]
QUE : Explain the terms (i) drift current (ii) diffusion current. (3) [Winter-17]
QUE : Differentiate between drift and diffusion currents. (3) [Summer-03, Winter-18]

2.5. V-I CHARACTERSTICS AND WORKING OF PN-JUNCTION DIODE

Fig.2.4 shows forward as well as reverse characteristics of PN junction diode.

Fig.2.4: V-I characteristics of P-N junction diode.

Forward Bias:
 When the junction is forward biased, practically no current flows until the barrier voltage
is overcome.
 With further increase in voltage, current starts flowing & curve has a linear rise like an
ordinary conductor.
 The voltage at which current starts flowing through the diode is known as cut- in
voltage.
 It is the minimum value of voltage required to overcome potential barrier across the
junction.
 This voltage is 0.3 for Germanium and 0.7 V for silicon.
 The current in forward bias mode is large (in mA) due to the movement of majority
charge carriers across the junction.

Reverse Bias:
 When a junction is reversed biased, junction resistance increases with the increase in
reverse biased voltage (potential barrier) & very small current flow through it due to
minority charge carriers.
 As reverse voltage increases, the minority charge carriers acquire sufficient kinetic
energy.
 These accelerated charge carriers cross the junction and ionize the semiconductor atoms
in the depletion region leading to generation of free electrons and holes.
 These electrons and holes in turn get accelerated and cause further ionization of atoms in
P and N regions.

4
 Advanced Engineering Materials

 This process is called Avalanche breakdown and leads to sharp increase in current at a
reverse bias voltage called breakdown voltage.
 Thus, breakdown voltage is the applied reverse voltage at which large current flows
through the diode.
 In reverse bias condition the current through diode is very small in the range of μA due to
movement of minority charge carriers.

2.6 PN JUNCTION DIODE AS RECTIFIER

The process in which alternating voltage or alternating current is converted into direct
voltage or direct current is known as rectification. In our country domestic supply has a
voltage 220V(rms) varying at a frequency 50Hz. For operating most of the electronic
equipment, dc voltage is required. Hence it is necessary to convert ac voltage of main power
supply to dc voltage.
The device used for this conversion process is called as rectifier. The junction diode
has the property of offering low resistance and allowing current to flow through it in the
forward biased condition. This property is used in the process of rectification.

A PN junction diode can be used as:

 Half wave rectifier
 Full wave rectifier
 Bridge rectifier.

2.6.1 HALF WAVE RECTIFIER:

Fig.2.5: Half wave rectifier

 Half Wave Rectifier is a circuit which converts ac signal to dc signal by employing a
single PN junction diode for rectification purpose as shown in fig.2.5.
 In half wave rectifier circuit, an alternating voltage is applied to a single diode
connected in series with a load resistor RL.
 An ac signal full wave consists of half positive and half negative wave. PN junction
diode conducts during only one half- cycle of the input ac cycle.
 During a positive half cycle diode D is forward based hence conducts and transfers the
half wave. Diode offers low resistance hence a large current I L flows through the load
resistor RL. Output voltage Vo develops across RL and transfers the half wave.
 During a negative half cycle, diode D is reverse biased hence does not conduct.
Therefore, IL=0 and hence gives no output (Vo=0). This implies that negative half cycle
of input voltage is not utilized for delivering power to the load.
 As the output contains only positive half cycles i.e., unidirectional half waves, the circuit
is called as half wave rectifier.

2.6.2 FULL WAVE RECTIFIER:

5
 Advanced Engineering Materials

Fig.2.6: Full wave rectifier

 Full Wave Rectifier is a circuit which converts ac signal to dc signal by using two PN
junction diodes for rectification purpose as shown in fig.2.6.
 In full wave rectifier circuit, diodes conduct (One diode conduct during each half
cycle) during both the half cycles of input ac voltage.
 A full wave ac signal input consists of half positive and half negative wave. It is
provided to the full wave rectifier from a transformer with a centre -tapped secondary
winding.
 During a positive half cycle of secondary voltage, diode D1 is forward biased hence
conducts and transfer the half wave. Current IL flows through diode D1, the load
resistor RL and the upper half-winding of the secondary. Output voltage Vo develops
across RL. D2 is reverse biased.
 During a negative half cycle, diode D2 is forward biased hence conducts and transfer
the half wave. Current IL flows through diode D2, the load resistor RL and the lower
half-winding of the secondary. D1 is reverse biased.
 The direction of current flows through the load resistor RL in both cases is same.
 During both the half cycles, current IL passes through the load resistor RL and produces
output voltage Vo. Thus, in Full wave rectifier, both the half cycles are utilized to
produce the output.
 As the output contains only positive continuous series of positive half cycles of
alternating voltage i.e., unidirectional waves for each input half wave, the circuit is
called as Full wave rectifier. The input and output wave forms are as shown in fig.2.6.

2.6.3 BRIDGE RECTIFIER

Fig.2.7: Bridge rectifier

 The bridge rectifier is constructed by using four individual rectifying diodes

connected in a closed loop “bridge” configuration to produce the desired output.

6
 Advanced Engineering Materials

 The main advantage of this bridge circuit is that it does not require a special centre
tapped transformer, thereby reducing its size and cost.
 The single secondary winding is connected to one side of the diode bridge network
and the load (RL) to the other side as shown in fig.2.7.
 The four diodes labelled D1 to D4 are arranged in “series pairs” with only two diodes
conducting current during each half cycle.
 During the positive half cycle of the supply, diodes D1 and D3 conduct in series while
diodes D2 and D4 are reverse biased and the current IL flows through the load (RL) is
as shown in fig.2.7.
 During the negative half cycle of the supply, diodes D2 and D4 conduct in series, but
diodes D1 and D3 are switched “OFF” as they are now reverse biased. The current IL
flowing through the load (RL) is in the same direction as before.
 As the current flowing through the load is unidirectional, so the voltage developed
across the load is also unidirectional, the same as for the previous two diode full-
wave rectifier.
2.7 ZENER DIODE
 Zener diode is a specially designed ordinary P-N junction diode, which is heavily doped
to have a very sharp and almost vertical breakdown.
 They are exclusively operated under reverse bias conditions and designed to operate in
breakdown region without damage.
 The device was named after Clarence Zener, who discovered this electrical property.
 The commonly used schematic symbol for Zener diode is shown in Fig.2.8.

Fig: 2.8: Symbolic representation of Zener diode

2.7.1. V-I CHARACTERSTICS AND WORKING OF ZENER DIODE

Fig.2.9: V-I Characteristics of Zener diode.

 The Forward bias characteristics of Zener diode are same as that of normal PN Junction
diode.

7
 Advanced Engineering Materials

 When the applied forward bias voltage ‘VF’ is less than the cut in voltage, the current is
negligibly small. When VF becomes greater than cut in voltage,current starts increasing
rapidly.
 In reverse bias mode, current is due to minority charge carriers.
 Since the P and N-regions are heavily doped, the depletion layer at the junction will be
very narrow.
 The reverse bias voltage set up a strong electric field across the narrow depletion layer.
This field is strong enough to cause rupture of covalent bonds of atoms. Therefore, there
is a generation of a large number of electron-hole pairs, leading to a sharp increase in the
reverse current.
 When reverse bias is increased, a voltage is reached when the diode starts conducting
heavily and the reverse current increases sharply. This voltage is called Zener breakdown
voltage(Vz).
 A Zener diode maintains a constant voltage across its terminals when the reverse bias
exceeds the breakdown voltage. Therefore, it is used as voltage regulator.

2.7.2. APPLICATIONS OF ZENER DIODE

 Zener diode is used as voltage regulator.

 It is used as a fixed reference voltage in a network for biasing and comparison.
 It is used for calibrating voltmeters.
 It is used for avoiding meter damage by accidental application of excessive voltage.

QUE: Explain forward and reverse bias characteristics of zener diode. (4) [Summer-13]
QUE: Explain V-I characteristics of Zener Diode. (3) [Summer -15, 16]

2.7.3. DIFFERENCE BETWEEN ZENER BREAKDOWN AND AVALANCHE

BREAKDOWN

Table 2.1: Differences between Zener breakdown and avalanche breakdown

Zener breakdown Avalanche breakdown

1.This occurs at junctions which are heavily 1.This occurs at junctions which are lightly
doped with narrow depletion region. doped with wide depletion layer.

2.This breakdown voltage sets up a very strong 2.In this case, electric field is not strong enough
electric field across this narrow layer. to produce Zener type breakdown.

3.The electric field is very strong to rupture the 3.The minority carriers collide with atoms in the
covalent bonds thereby generating electron depletion region, which breaks the covalent
hole pairs. So even a small increase in reverse bonds and electron-hole pairs are generated.
voltage is capable of producing large number Newly generated charge carriers are accelerated
of current carriers. Hence the junction has a by the electric field which results in more
very low resistance. This leads to Zener collision and generates avalanche of charge

8
 Advanced Engineering Materials

breakdown carriers. This leads to avalanche breakdown.

4. Once Zener breakdown occurs, after the 4. Once avalanche breakdown occurs, junction
reverse voltage is removed from the diode, the gets destroyed completely and it cannot regain
junction gets back to its normal position. back its position.
5. Zener breakdown occurs when the operating 5.Avalanche breakdown occurs when the
voltage is between 5 to 8 Volts. operating voltage is greater than 8 Volts

2.8 TUNNEL DIODE

 Tunnel diode is a heavily doped P-N junction diode with high conductivity of about 1000
times greater than a conventional junction diode. This is because the width of the
depletion layer is reduced to extremely small value of the order of 100A0.
 Operation of tunnel diode utilizes the phenomenon of tunneling of electrons through the
potential barrier of the junction.
 It exhibits negative resistance i.e., current through the diode decreases with the increase in
voltage.
 This diode is also known as Esaki diode called after the name of the inventor Dr. Leo
Esaki, received Nobel Prize in physics in 1973.
 The commonly used schematic symbol of tunnel diode is shown in Fig.2.10.

Fig.2.10: Symbolic representation of tunnel diode

2.8.1. V-I CHARACTERSTICS AND WORKING OF TUNNEL DIODE

Fig. 2.11: V-I characteristics of tunnel diode

 As a forward voltage across the tunnel diode is increased from zero, electron from N
region ’tunnel’ through potential barrier to the P region. As a result, diode current
increases until the peak point ‘P’ is reached. Till then the diode exhibits positive
resistance.
 As the voltage is increased beyond VP, the tunneling action start deceasing & diode
current decreases till valley point ‘V’ is reached. In the region between peak point &
valley point current decreases and the diode shows negative resistance (i.e., When the
forward bias is increased, the current decreases).
 When forward bias is increased beyond valley point voltage V v , the tunnel diode behaves
as a normal diode. The diode current increases with increase in forward voltage.

2.8.2. APPLICATIONS OF TUNNEL DIODE

9
 Advanced Engineering Materials

 When operated in the negative region, they can be used as oscillator.

 They are used in low power amplifiers.
 They can be used as switching device in computers.
 Since tunnel diodes are more resistant to nuclear radiation, they are used in space applications
like amplifiers for satellite communications.

QUE: Explain V-I characteristics of tunnel diode. (3) [Winter-12]

QUE: What is tunnel diode, draw and explain its V-I characteristics.

2.9 PHOTO DIODE

 A photodiode is a type of light detector, used to convert the light energy into electrical
energy (current or voltage) based on the mode of operation of the device.
 It is also called as light sensor.
 Typical photodiode materials are Silicon, Germanium, Indium Gallium Arsenide
Phosphide and Indium gallium arsenide.
 The symbol of the diode is shown in fig,2.12.

Fig.2.12: Symbol of photodiode

2.9.1. V-I CHARACTERISTICS AND WORKING OF PHOTODIODE:

Fig.2.13: Working Principle of photodiode

 The Photodiode works in reverse bias mode.

 In this mode, the depletion region has large width.
 When reverse biased is applied to the diode, a small amount of current due to minority
charge carriers is produced.

10
 Advanced Engineering Materials

 This current is obtained without the incidence of light radiation and hence called as
leakage current or dark current.
 Working Principle: When light photons of sufficient energy h  Eg are incident on
the depletion layer, electrons and holes are generated. This mechanism is called the inner
photoelectric effect.
 If the absorption of light takes place in the depletion region, then the charge carriers are
removed from the junction by the inbuilt electric field of the depletion region.
 Therefore, the holes move toward the anode, and electrons move toward the cathode, and
a photocurrent is generated as shown in fig.2.13.
 The V-I characteristics of photodiode is shown in fig.2.14.
 This current depends upon the intensity of incident radiation.
 The amount of photocurrent generated increases as light intensity (IL) increases.
 The total current through the diode is the sum of dark current and photocurrent.
 To maximize the sensitivity of photodiode we need to minimize the dark current.

Fig.2.14: V-I characteristics of photodiode

Modes of Operation:
The operating modes of the photodiode include three modes, namely Photovoltaic mode,
Photoconductive mode, an avalanche diode mode.
Photovoltaic Mode:
 In this mode, the diode is not connected to power source. We do not bias the diode.
 When the light falls in such condition on the photodiode, it excites the electrons to higher
energy state and results in electrons to move towards cathode terminal and holes towards
anode terminal. This process creates a potential difference between two terminals.
Photoconductive Mode:
 In photoconductive mode, the diode is connected to the power source and diode is reverse
biased.
 The reverse voltage application will increase the depletion layer’s width.
 When the light falls on the photodiode creates a pair of electrons and holes which move
in the opposite direction due to biased voltage.
Avalanche Diode Mode:
 An Avalanche photodiode is operated at reverse bias close to the breakdown voltage.
 When reverse-biased, there is a creation of strong fields in the junction region.
 When a photon generates an electron-hole pair, the pair flows through the junction.
Because of the strong fields in the junction, the electron gains enough energy to cause
ionisation of neutral atoms and secondary electrons and holes are generated.

11
 Advanced Engineering Materials

 Thus, a multiplication (or avalanche) process takes place (hence the name), and a
substantial current is generated from few initial photons as shown in fig.2.15.
 The avalanche photodiodes are good for those optical systems where intensity of
incoming light signal is very low.

Fig.2.15: Avalanche photodiode

2.9.3 APPLICATIONS:

We can use the photodiode in

 smoke detectors to sense smoke and fire,
 a solar panel as solar cells,
 barcode scanner for character recognition,
 the obstacle detection system,
 printers as page presence and page counter,
 Optical message transmission,
 Fibre optics-based communication network as photo detector.
 It is also used as Position sensor.

2.10 LIGHT EMITTING DIODE(LED)

 LED is a specially made forward biased P-N junction diode, which emits light due to
electron-hole recombination, when energized.
 This works on the principle of electroluminescence, the process in which electrical energy
is converted into light energy.
 Henry Joseph Round was the first person to observe the phenomenon of
electroluminescence in 1907 and invent the first LED.
 It is operated only in forward bias.
 The symbol of LED is shown in Fig. 2.16.

Fig. 2.16: Symbolic representation of LED

2.10.1. V-I CHARACTERSTICS AND WORKING OF LED

12
 Advanced Engineering Materials

Fig. 2.17(a): Working of LED diode Fig. 2.17 (b): V-I characteristics of LED

 When Light Emitting Diode (LED) is forward biased, the free electrons from N-side and
the holes from P-side move towards the junction as shown in fig.2.17(a)
 Like ordinary diode, the forward current is negligible up to a certain value of forward
applied voltage due to the potential barrier across the PN-junction.
 When free electrons reach the junction, they overcome the potential barrier and
recombine with the holes.
 In the similar way, holes from p-side recombine with electrons in the depletion
region. Because of the recombination of free electrons and holes in the depletion region,
the width of depletion region decreases.
 The recombination of free electrons and holes leads to generation of light.
 The wavelength of light emitted and its color depends on Energy Gap (Eg) of material
used in making of LED.
ℎ𝑐 ℎ𝑐
 The wavelength of light emitted 𝜆 = where 𝐸𝑔 = ℎ𝜈 = . For light to be emitted in
𝐸𝑔 𝜆
visible region, Energy gap 𝐸𝑔 should be between 1.77eV to 3.11eV.
 Silicon and Germanium have bandgap energies that correspond to infrared light which is
not visible. Energy gap 𝐸𝑔 of Silicon is 1.1eV and that of Germanium is 0.72eV. They are
known as indirect- bandgap semiconductors. This means, its not possible for electrons
and holes to recombine directly and form a photon. Instead, you get a phonon (type of
lattice vibration) which is effectively heat.
 An LED requires a direct- bandgap semiconductors having Energy gap ≥ 1.8eV. This can
happen very efficiently in materials like Gallium Arsenide Phosphide (GaAsP) 𝐸𝑔 =
1.9eV and Gallium Phosphide (GaP) 𝐸𝑔 = 2.26eV.The Energy released in these
materials produces intense visible light.
 The V-I characteristics of LED is shown in fig. 2.17(b).When the voltage applied
overcomes the Energy gap(potential barrier), current increases rapidly as more number of
charge carriers cross the PN junction. This voltage above which the diode start
conducting is called cut-in voltage of LED.
 The voltage after cut-in value remains almost constant once LED starts conducting like
ordinary diode, but current increases rapidly.

2.10.2. APPLICATIONS OF LIGHT EMITTING DIODE

 LED are commonly used as indicator in electronic circuits.
 They are used in electronic calculators to display the numbers.
 They are used in digital meters & electronic clocks.
 Infrared LEDs can be used as a source in optical fiber communications.

13
 Advanced Engineering Materials

 LEDs are used in Burglar alarms systems, Calculators, Picture phones, Traffic signals, Digital
computers, Microprocessors, Digital watches, Automotive heat lamps, Camera flashes and
Aviation lighting.

2.10.3 ADVANTAGES OVER FILAMENT LAMPS

 Low operational voltage and less power is required to operate.

 Fast action and no warm-up time required.
 Long life.
 Fast on-off switching capacity.
 Emits monochromatic light.
 Smaller in size and lighter in weight.

QUE: What is LED? Draw and explain its V-I characteristics.

2.11. TRANSISTORS
 Transistor was invented in 1947 by American Physicists Bardeen, Brattain and Schockley
at Bell Telephone laboratories.
 A transistor is a semiconductor device that contains three regions separated by two
distinct PN junctions. The two junctions are EB junction and CB junctions.
 The central region is called base.
 The two outer regions are called emitter and collector.
 There are two types of charge carriers, electrons and holes hence transistor is called
bipolar transistor.
 Transistor can be viewed as two PN junction diodes arranged back-to-back with base
being common to both the diodes.
 As soon as the two junctions are formed, majority charge carriers diffuse and form two
depletion layers. Depletion layer is narrow at EB junction and wide at CB junction.

QUE : What is a transistor ? (1) [Winter-18]

There are two types of transistors:

1.NPN transistor--P-type sandwiched between two N-type.
2.PNP transistor--N-type sandwiched between two P-type.

14
 Advanced Engineering Materials

Fig.2.18: Block diagram and Symbolic representation of NPN & PNP transistor

2.11.1 FUNCTIONS OF THREE REGIONS IN TRANSISTOR:

Emitter, Base and Collector are three regions in a transistor.
Emitter:
 It emits charge carriers.
 It is heavily doped and has moderate size.
 It is located at the one end of transistor.
Base:
 The base controls the flow of charge carriers from emitter to the collector. Therefore, it
acts as a gate between emitter and collector.
 It has minimum thickness and is lightly doped.
 It makes the central region of a transistor.
Collector:
 It collects the charge carriers coming from the base.
 It has largest size with moderate doping. It is moderately doped.
 It is at the other end of a transistor.

2.11.2 Biasing of transistor

 The Emitter-Base (EB) junction of transistor is always forward biased, and Collector-
Base (CB) junction of transistor is always reverse biased.
 Therefore, it works in an active mode. Hence, it transfers current from low resistance
region (EB) to high resistance region (CB).
 It is seen that almost same current flows through the two junctions.
 Thus, the device is called as transistor- the shortened form of transfer resistor.

2.11.3. EXPLAIN WHY:

Base region is lightly doped:

 If base region is heavily doped, more holes would be present in the base (for NPN
transistor).
 The incoming electrons would then undergo more recombination with holes in base.
 This would decrease the no. of electrons entering the collector region.
 Hence the collector current will decrease and base current will increase.
 But in transistor circuits, more collector current and less base current is required.
 Hence to minimize base current base region is lightly doped.

15
 Advanced Engineering Materials

Base region is narrow:

 The main function of the base is to control the number of charge carriers from emitter to
collector and hence offers easy and quick diffusion of carriers into collector region.
 If the width of the base is more, then it would lead to more number of recombination
causing an increase in base current.
 But in transistor circuits, more collector current and less base current is required.
 Hence to offer quick diffusion of charge carriers and to keep base current to a minimum
amount, the base region is made narrow.

Emitter is heavily doped:

 The main function of the transistor is to emit charge carriers.
 In transistor circuit it is required that a maximum number of majority carriers are injected
into the base so that the emitter current IE will be large.
 Hence to provide large no. of charge carriers emitter is heavily doped as compared to base
and collector.

Collector region is larger:

 The main function of collector is to collect all the charge carriers coming from base.
 Due to the movement of minority charge carriers across the reverse biased collector base
junction, large amount of heat is produced as the minority charge carriers acquire large
amount of kinetic energy.
 Hence to collect all the charge carriers and to dissipate away the heat, the collector region
is made larger.

QUE: Explain why in a transistor (i) The base is thin and lightly doped (ii) The collector
is large in size. (2) [Winter-12, 15]
QUE : Why the base region is thin and lightly doped in a transistor ? Explain.
(3) [Winter-16]
QUE: Explain the function of emitter, base and collector in a transistor.
(3) [Winter-12, Summer-18]
QUE: Explain why the emitter is heavily doped? (1) [Winter-18]

2.12 CIRCUIT CONFIGURATION

COMMON BASE CONFIGURATION:

Fig.2.19: Transistor in common base configuration

In this circuit, Base terminal is made common to both input and output circuits.

COMMON EMITTER CONFIGURATION:

16
 Advanced Engineering Materials

Fig.2.20: Transistor in common emitter configuration

In this circuit, Emitter terminal is made common to both input and output circuits.

COMMON COLLECTOR CONFIGURATION:

Fig.2.21: Transistor in common collector configuration

In this circuit, collector terminal is made common to both input and output circuits.

2.13. TRANSISTOR ACTION

Fig.2.22: Working of Transistor in common base mode

1. Consider an NPN transistor biased by using two batteries VEE& VCC as shown in fig.2.22
The emitter base junction is kept at forward biased by battery VEE & collector biased
junction is kept as reverse biased junction by battery VCC.
2. As emitter base junction is forward biased the electron from emitter (E) moved towards
base (B) & holes from base (B) moves towards emitter (E). Since emitter is highly doped
& base is lightly doped, the emitter current IE is practically due to electron moving from
emitter to base.
3. On entering the base region, electrons recombine with small no. of available holes in the
base region, causing base current IB. Since the base region is light doped, the
recombination is very less & hence IB is very less.

17
 Advanced Engineering Materials

4. The electrons experience a very strong electric field due to reversed biased CB junction &
get swept into the collector region. This constitutes collector current IC. Maximum number
of electrons flow from emitter into the collector. This is possible due to light doping &
small size of base region.
5. The total emitter current IE is given by ---------- (1)
IE = IB + IC

2.14 APPLICATIONS OF TRANSISTOR

 It is used in switching electronic circuits.
 It is used as an amplifier.
 It is used in integrated circuits.

2.14.1 Application of Transistor as amplifier

Transistor can work in three different regions like active region, cutoff region & saturation
region. They are turned off while working in the cut-off region and turned on while working
in the saturation region. Transistors work as an amplifier when they work in the active region.
The main function of a transistor as an amplifier is to enhance the input signal. The input of
the amplifier is a voltage otherwise current, where the output will be an amplified input
signal.

I. Common Emitter transistor amplifier:

A transistor in which the emitter terminal is made common for both the input and the output
circuit connections is known as common emitter configuration. When this configuration is
provided with alternating current (AC) supply and operated in between both positive and the
negative halves of a.c. cycle to generate the specific output signal is known as common
emitter amplifier. In this type of configuration, the input is applied at the base terminal and
the output is to be collected across the collector terminal. Emitter terminal is common in both
the cases of input as well as output as shown in fig.2.23.

Fig.2.23: Common Emitter Transistor Amplifier

In this circuit, the Emitter Base junction is forward biased using base - emitter battery VEB
and collector -Base junction is reverse biased using collector - emitter battery Vcc. The low
input signal is applied to the emitter-base junction and the amplified output is obtained across
the Rc load connected in the collector circuit. The collector current is controlled by base

18
 Advanced Engineering Materials

current. When input signal is applied to the base, very small change in base current produces
very large changes in collector current. Therefore, the current gain is substantially high.

a) D.C current Gain: It is the ratio of collector current to base current. It is denoted by
‘β’.

𝐼𝐶
∴ 𝑑. 𝑐 𝑐𝑢𝑟𝑟𝑒𝑛𝑡 𝑔𝑎𝑖𝑛, 𝛽 = 𝐼𝐵
--------------- (1)
b) A.C current Gain: It is the ratio of change in collector current to change in base
current. It is denoted by ‘βac’.

∆𝐼
∴ 𝑎. 𝑐 𝑐𝑢𝑟𝑟𝑒𝑛𝑡 𝑔𝑎𝑖𝑛, 𝛽𝑎𝑐 = (∆𝐼𝐶 ) --------------- (2)
𝐵 𝑎𝑐

The value of β is between 20 to 500.

c) A.C. Voltage Gain: It is the ratio of the a.c output voltage to a.c. input voltage. It is
denoted by AV.
𝑉𝑂 𝑅
∴ 𝑎. 𝑐 𝑉𝑜𝑙𝑡𝑎𝑔𝑒 𝑔𝑎𝑖𝑛, 𝐴𝑉 = 𝑉𝑖
= = - β 𝑅𝐶 ---------------- (3)
𝐵

where RB is the input resistance.

The negative sign indicates that the output voltage is opposite with the phase of input
voltage.

d) Power gain
The power gain Ap is the product of the current gain and voltage gain.

Ap = βac * Av
The power gain is also defined as the ratio of change in output power to the change in
input power.

II. Common base transistor Amplifier:

In common base configuration, emitter is the input terminal, collector is the output terminal
and base terminal is connected as a common terminal for both input and output.

Fig.2.24: Common Base Transistor Amplifier

19
 Advanced Engineering Materials

Fig.2.24 shows NPN transistor connected in Common Base configuration. The transistor is
biased to operate in the active region. The battery VEE forward biases the EB junction and the
battery VCC reverse biases CB junction. As signal source Vi is connected to input circuit and a
load resistance RL is connected in output circuit. An output voltage Vo is developed across RL.
The input circuit has a low resistance. Hence a small change in the signal voltage will cause a
significant change in the collector current due to transistor action. Thus, a large voltage drop
occurs when collector current flows through load resistor. Hence a weak signal applied in
input circuit gets amplified in the collector circuit. The output voltage is in phase with the
input signal.

a) Current gain (amplification factor): The ratio of the change in the collector current
to the change in the emitter current at constant collector to base voltage (V CB) is
called the current amplification factor α.

∆𝐼𝐶
𝐶𝑢𝑟𝑟𝑒𝑛𝑡 𝑔𝑎𝑖𝑛 𝛼 = ( ) --------------- (5)
∆𝐼𝐸 𝑉
𝐶𝐵

The value of the current amplification factor α is always less than 1. The typical current gain
of a common base amplifier is 0.98.
b) Voltage Gain (G): It is the ratio of output signal voltage to input signal voltage.

𝑉𝑂
𝑽𝒐𝒍𝒕𝒂𝒈𝒆 𝒈𝒂𝒊𝒏 𝑨𝑽 = 𝑉𝑖
-------------- (6)

The emitter current variation ∆𝐼𝐸 due to emitter-base voltage variation is taken as
𝑉𝑖
∆𝐼𝐸 = 𝑟𝑖
---------------- (7)
The change in collector current ∆𝐼𝐶 due to variation in emitter current ∆𝐼𝐸 is given by

∆𝐼𝐶 = 𝛼 ∆𝐼𝐸 ----------------- (8)

𝑉
This current ∆𝐼𝐶 causes a voltage drop, 𝑉𝑂 = ∆𝐼𝐶 𝑅𝐿 = 𝛼 ∆𝐼𝐸 𝑅𝐿 = α 𝑟 𝑖 𝑅𝐿
𝑖
𝑉𝑂 𝑅𝐿
∴ 𝑽𝒐𝒍𝒕𝒂𝒈𝒆 𝒈𝒂𝒊𝒏 𝑨𝑽 = =α
𝑉𝑖 𝑟𝑖
𝑅𝐿
= 𝑟𝑖
as α ≅ 1

𝑅𝐿 is order of kilo- ohms, hence 𝑅𝐿 >> 𝑟𝑖 .Therefore, 𝑉𝑂 is larger than 𝑉𝑖 indicating that
the transistor amplifies a small input voltage to large output voltage.

2.14.2 Relation between α and β:

∆𝐼 ∆𝐼
𝐶𝑢𝑟𝑟𝑒𝑛𝑡 𝑔𝑎𝑖𝑛 𝛼 = (∆𝐼𝐶 ) and 𝛽 = (∆𝐼𝐶 )
𝐸 𝑉𝐶𝐵 𝐵 𝑉𝐶𝐸

Since 𝐼𝐸 = 𝐼𝐵 + 𝐼𝐶

∆𝐼𝐸 = ∆𝐼𝐵 + ∆𝐼𝐶

20
 Advanced Engineering Materials
∆𝐼𝐸 ∆𝐼 ∆𝐼
Dividing by ∆𝐼𝐶 , ∆𝐼𝐶
= ∆𝐼𝐵 + ∆𝐼𝐶
𝐶 𝐶

∆𝐼𝐸 ∆𝐼𝐵
= +1
∆𝐼𝐶 ∆𝐼𝐶

1 1
or 𝛼
= 𝛽+1

𝛼
or 𝛽 =
1−𝛼

Hall effect
2.15. HALL EFFECT
Statement:

 If a metal or a semiconductor carrying a current, I is placed in a transverse magnetic field

B, a potential difference VH is produced in a direction normal to both the magnetic field
and current directions. This is known as Hall Effect.

Fig. 2.25: Hall Effect setup

Determination of Hall Voltage

 Consider a thin wafer of P-type semiconductor crystal with holes the majority charge
carriers.

 Let an electric field be applied to the it which produces a current I in the x-direction in the
crystal.

 The Current through the semiconductor wafer is given by

I = p e A 𝑣𝑑 ----------- (1)

where ‘p’ is the concentration of holes, ’A’ is the area of cross section area of the end face of

Semiconductor wafer = w t and 𝑣𝑑 is the drift velocity of holes.

 The current density is given by Jx = I / A

J x = p e 𝑣𝑑 ----------- (2)

 Let the magnetic field B be applied in the Z-direction.

21
 Advanced Engineering Materials

 The holes experience a Lorentz force FL due to the transverse magnetic field B and they
are deflected towards the front face and make it positively charged while the rear face
becomes negatively charged.
 Hence, a potential VH called the Hall Voltage is developed between the front and rear
face. In the equilibrium state
FE = FL

e E H = B e 𝑣𝑑

or EH = B𝑣𝑑 ----------- (3)

𝑉𝐻
Since EH = 𝑤
where ‘w’ is the width of the wafer.

𝑉𝐻
Therefore 𝑤
= Bvd -------------(4)

𝐻 𝑉
Hence vd = 𝐵𝑤 ------------ (5)

Equation (5) can be used to calculate drift velocity of holes.

𝐽𝑥
From Eq. (2) 𝑣𝑑 = -------------- (6)
𝑝𝑒

Therefore Eqn. (5) and Eqn. (6) we get

𝑉𝐻 𝐽𝑥
𝑣𝑑 = =
𝐵𝑤 𝑝𝑒

𝐽𝑥
or VH = w 𝐵
𝑝𝑒

𝐼 𝐼
or VH = w B since curent density Jx =
𝐴𝑝𝑒 𝐴

 If ‘t’is the thickness of semiconductor plate of area, A = wt, substituting value of A we

get,
𝒘𝑩𝑰 𝑩𝑰
Hall Voltage VH = 𝒑𝒆𝒘𝒕 = 𝒑𝒆𝒕 ---------- (7)

 With the direction of magnetic field and current as taken above, the sign of the Hall
Voltage is positive.
 For an N-type semiconductor, Hall Volatge will be negative for same direction of current
and Magnetic field.
 Thus knowing the sign of Hall Voltage, the type of semiconductor and sign of majority
charge carrier can be known.
2.15.1. Hall coefficient RH : Hall coefficient RH is defined as Hall electric field per unit current
density per unit magnetic induction.
𝑉𝐻 𝐽
𝐸𝐻 𝐵 𝑥
𝑤 𝑝𝑒
RH = = = [using eqn. (4.31)]
𝐽𝑥 𝐵 𝐽𝑥 𝐵 𝐽𝑥 𝐵

𝐵𝐽𝑥 1
or RH = = --------- (8)
𝑝𝑒.𝐽𝑥 𝐵 𝑝𝑒

𝐵𝐼
Since Hall voltage VH = 𝑝𝑒𝑡

22
 Advanced Engineering Materials
𝑅𝐻 𝐵𝐼
or VH = 𝑡
----------- (9)

Equation 9 gives the relation between Hall voltage and Hall coefficient.

2.15.2. HALL MOBILITY (µH): Hall mobility is defined as drift velocity acquired by the
charge carriers per unit electric field.
𝑣𝑑
∴ Hall mobility µH = ------------- (10)
𝐸

As J= p e 𝑣𝑑

And J = σ E

where, σ is the conductivity of the material

∴ p e 𝑣𝑑 = σE
𝒗𝒅 σ
or 𝑬
= 𝑝𝑒

𝒗𝒅 σ
∴ µH = = = RH σ ----------- (11)
𝑬 𝑝𝑒

1
where RH = 𝑝𝑒

Thus knowing RH and σ, Mobility of electrons and holes can be calculated using eqn.11.

2.15.3. CONCENTRATION OF MAJORITY CHARGE CARRIERS:

1 1
 RH = 𝑝𝑒
Hence hole concentration p = 𝑅𝐻 𝑒
for p- type semiconductor.
1
 For N-type Semiconductor, n = - 𝑅 𝑒.
𝐻
 Thus Carrier concentration in P type and N-type semiconductor can be calculated
using RH value.

2.15.4. DRIFT VELOCITY (vd):

 According to the equilibrium condition, FE = FL, we have
𝑉𝐻
𝑒 = 𝑒 𝐵 𝑣𝑑
𝑤

𝑽𝑯
∴ 𝒗𝒅 = --------------- (12)
𝑩𝒘
 Drift velocity can be calculated by using Hall voltage VH & magnetic field B and width of
the wafer w.
2.15.5. HALL ANGLE θH:
 The net electric field E in the semiconductor is a vector sum of Ex and EH. it acts at an
angle θH to the x-axis, where θH is called as Hall angle.
𝐸𝐻
tan 𝜃𝐻 = 𝐸𝑥
------------------ (13)

𝑉𝐻 𝐽 𝐸𝑋
But 𝐸𝐻 = 𝑤
= 𝐵 𝑝𝑒 and 𝐽 = 𝜌
since 𝐽 = 𝜎𝐸𝑋
𝐵𝐽
Thus, eqn. (12)becomes tan 𝜃𝐻 =
𝑝𝑒𝜌𝐽

23
 Advanced Engineering Materials
𝐵
or tan 𝜃𝐻 =
𝑝𝑒𝜌

1 1
But = 𝑅𝐻 𝑎𝑛𝑑 =𝜎
𝑝𝑒𝜌 𝜌

∴ tan 𝜃𝐻 = 𝜎 𝑅𝐻 𝐵 --------------- (14)

or tan 𝜃𝐻 = 𝜇𝐻 𝐵 as 𝜇𝐻 = 𝜎𝑅𝐻 --------------- (15)

QUE: Explain the phenomenon of Hall Effect and obtain an expression of Hall voltage
developed in rectangular specimen of conductor at equilibrium. (4) [Winter-13]
QUE: Explain the induction of hall Voltage in a semiconductor carrying current and placed
in transverse magnetic field. Also obtain an expression for Hall Coefficient. (4) [Summer-14]
QUE: What is Hall Effect? Obtain an expression for Hall coefficient. (4) [Winter-14]
QUE: What is Hall Effect? Derive the relation for Hall voltage and Hall coefficient.
(4) [Summer -15]
QUE: Derive the expression for Hall voltage and Hall coefficient for extrinsic semiconductor.
(4) [Winter-15, Summer-19]
QUE: What is Hall Effect? Obtain an expression for Hall coefficient for a specimen having
only one type of charge carriers. (4) [Summer-16]
QUE: Explain the formation of Hall voltage developed in an extrinsic semiconductor and
obtain the expression for Hall coefficient. (4) [Winter-16]
QUE: What is Hall Effect? Obtain an expression for Hall voltage if p type semiconductor
material is used. (2+3) [Summer-17, Winter-18]
QUE: What is Hall Effect? With a well labeled diagram obtain an expression for Hall
coefficient for an extrinsic semiconductor. (4) [Winter-
08,09 &17, Summer-08]
QUE: Explain the phenomenon of Hall Effect and obtain an expression for Hall voltage for
an extrinsic semiconductor. (4) [Summer-18, Winter-06,
07]
QUE: Explain Hall Effect. Obtain an expression for Hall coefficient and Hall mobility in case
of extrinsic semiconductor. (6) [Summer-11, 12]
QUE: What is Hall Effect? Derive the relation for Hall voltage and Hall coefficient.
(5) [Winter-12]

2.15.6. THE IMPORTANCE OF HALL EFFECT

In the field of semiconductor Hall effect helps

1. To determine the drift velocity of charge carriers.

2. To determine the sign of charge carriers.
3. To determine the charge carrier concentration.
4. To determine the mobility of charge carriers if conductivity of the material is known.
5. To measure variable magnetic fields up to frequency of 1012Hz.
6. To measure extremely heavy currents, where conventional ammeter cannot be used.

2.15.7. EFFECT OF TEMPERATURE ON HALL COEFFICIENT

 In metals, Hall coefficient does not depend on temperature.
 Hence concentration of free electrons does not vary with temperature.

24
 Advanced Engineering Materials

 In semiconductors, Hall coefficient decreases with the rise in temperature.

 Thus, the concentration of free electrons increases with temperature.

1.14.8. SIGNIFICANCE OF HALL EFFECT

 Hall Effect experiment showed that it is the negative charge carriers namely electrons are
responsible for electrical conduction in metals.
 It also showed that there exist two types of charge carriers in semiconductors.

QUE : Explain Hall effect and its significance. Give its application. (5) [Summer-07]
QUE : What is Hall effect ? What are its applications? What is the effect of temperature on Hall
coefficient for semiconductors? (6) [Summer-09]
QUE : Explain Hall effect and its importance. (3)[Summer-05, Winter-11]

List of formulae:
𝐵𝐼 𝐵𝐼
1.Hall voltage VH = RH = 𝑛𝑒𝑡 where ‘t’ = thickness of sample.
𝑡
1 1
2.Hall coefficient RH = − 𝑛𝑒 for N-Type and RH = 𝑝𝑒 forP-Type.
where ‘n’ or ‘p’ = Electron or hole (carrier) concentration.
3.Drift velocity 𝑣𝑑 = 𝜇𝐻 E or
𝑉
4.Drift velocity 𝑣𝑑 = 𝐵 𝐻𝑤
5. Hall mobility𝜇𝐻 = RH σ and w= width of the sample.
6. Hall Angle𝜃𝐻 = tan−1 (𝜇𝐻 𝐵).
𝐼
7.Current gain (CB mode) α = 𝐼𝐶 .
𝐸
𝐼𝐶
8. Current gain (CE mode) β = 𝐼 .
𝐵
9.Emitter current 𝐼𝐸 = 𝐼𝐶 + 𝐼𝐵 .
𝑉
10. Collector current, IC = 𝑅𝐶
𝐶

Solved Problems:
1. In Hall coefficient experiment a current of 0.25 A is sent through a metal strip having
thickness 0.2 mm and width 5 mm. The Hall voltage is found to be 0.15 mV when a magnetic
field of 2000 Gauss is used. Calculate (a) carrier concentration (b) drift velocity of the
carriers. (4)[Summer-03,07,08,10
&13]

Ans. Given: I = 0.25A,

thickness t= 0.2mm= 0.2×10-3m,
w= 5mm= 5×10-3m,
VH = 0.15mV=0.15×10-3V.
B =2000Gauss = 2000×10-4T.
n=? and 𝑣𝑑 =?

25
 Advanced Engineering Materials
𝑩𝑰 𝟐𝟎𝟎𝟎×𝟏𝟎−𝟒 ×𝟎.𝟐𝟓
Solution: VH= =
𝒏𝒆𝒕 𝒏×𝟏.𝟔𝟎𝟐×𝟏𝟎−𝟏𝟗 ×𝟎.𝟐×𝟏𝟎−𝟑

𝟐𝟎𝟎𝟎×𝟏𝟎−𝟒 ×𝟎.𝟐𝟓
or 0.15 × 10−3 =
𝒏×𝟏.𝟔𝟎𝟐×𝟏𝟎−𝟏𝟗 ×𝟎.𝟐×𝟏𝟎−𝟑
2000𝑋10−4 ×0.25
Hence Carrier concentration ‘n’ = 0.15×10−3×1.602×10−19×0.2×10−3 = 1.04 × 1025 /𝑚3

𝑉𝐻 0.15×10−3
Drift velocity 𝑣𝑑 = 𝐵𝑤
= 2000×10−4×5×10−3 = 0.15m/s.

2.The resistivity of doped silicon crystal is 9.27 ×10-3 ohm-m and Hall coefficient is 3.84 ×10-4
m3/C. Assuming that the conduction is by a single type of charge carrier, calculate the
density (carrier concentration) and mobility of carriers. (4)[Winter-09,12 &17, Summer-09]
Ans.
Given: Resistivity ρ = 9.27 ×10-3 ohm-m,
Hall coefficient RH = -3.84×10-4 m3/C,
Density (carrier concentration) n =?
Mobility of carriers μ=?
Solution:
1 1
Density (carrier concentration) = n= R 𝑒 = 3.84×10−4×1.602×10−19 = 1.6 × 1022/m3.
H
𝑅𝐻 3.84×10−4
𝜇𝐻 = Hall mobility = RH σ = = = 0.0414 m2/V.s.
𝜌 9.27×10−3

3. A specimen of a semiconductor is 1mm thick and 1cm wide. A magnetic flu× density of
0.5 T is applied parallel to 1mm edge and Hall voltage contacts are attached to measure the
voltage across the width of the sample. The current flowing length –wise through the sample
is 10mA.If the Hall coefficient of the material is 3.66×10-4m3/C, compute the voltage between
the Hall contacts. ii) If the resistivity of the material is 8.93×10-3Ω.m, find the Hall angle.
Ans.
Given: Thickness‘t’= 1mm =10-3m,
width ‘w’=1cm=0.01m,
B=0.5T,
I =10mA= 10×10-3A,
RH = 3.66×10-4m3/C,
ρ= 8.93×10-3Ω.m,
find Hall voltage
𝐵𝐼 0.5×10×10−3
Solution: VH = RH 𝑡
= 3.66×10-4 10 −3
= 1.86×10-4 volts.

4. An electric field of 100 V/m is applied to a sample of n-type semiconductor whose Hall
coefficient is -0.0125 m3/C. determine the current density in the sample assuming e = 0.36
m2 /Vs. (3) [Winter-06]

Ans.
Given: E=100V/m,
RH = 0.0125 m3/C,
e = 0.36 m2 /V.s
Find J.
𝜇𝑒 𝐸 0.36×100
Solution: Current density J = σE = 𝑅𝐻
= 0.0125
= 2880A/m2.
5. A specimen of a semiconductor is 1mm thick is placed in transverse magnetic field of 0.5T.
If the current flowing through the sample is 10mA, find (i) Hall angle(ii)Hall voltage if the
Hall coefficient of the material is 3.66x10-4 m3/C and the resistivity of the material is 8.93x10-
3
Ω.

Ans.

26
 Advanced Engineering Materials

Given: t = 1 mm= 10-3m

w = 1 mm = 10-3 m
B = 0.5 T
I = 10 mA = 10 x10-3A
RH = 3.66x10-4 m3/C
ρ = 8.93x 10-3 Ω-m.
VH=?
θH=?
𝐵𝐼 0.5×10−2
Solution:VH = RH 𝑡
= 3.66×10-4 10−3
= 1.83mV.
1 1
θH = tan−1(μH B) = tan−1(𝑅𝐻 ρ 𝐵) = tan−1(3.66 × 10−4 × 8.93×10−3 × 0.5)
= tan−1(0.0205) =1.17o
6. A semiconducting plate of thickness 2mm is placed in a magnetic field of 0.6 wb/m2
normal to its thickness. If the current of value 1.5x10-2A flows along its length, calculate the
Hall voltage if the Hall coefficient is 3.6x10-4 m3C-1.
Ans.
Given: t = 2 mm= 2x10-3m
B = 0.6 wb/m2
I = 1.5x10-2A
RH = 3.6 x10-4 m3/C
VH=?

𝐵𝐼 0.6×1.5×10−2
Solution:VH = RH 𝑡
= 3.6×10-4 2×10 −3
= 1.62 mV.

7.A semiconductor of width 4 mm is subjected to transverse magnetic field. The drift

velocity of electrons under this magnetic field is 3x103 m/sec. Calculate Hall voltage, if the
applied magnetic field is 4 wb/m2.
Ans.
Given: w=4mm=4 x10-3m
vd =3 x103m
B= 4 wb/m2

𝐒𝐨𝐥𝐮𝐭𝐢𝐨𝐧: 𝑉𝐻 = 𝐵𝑣𝑑 𝑤 = 4 × 3 × 103 × 4 × 10−3 = 48 V

8. The Hall coefficient of certain silicon specimen is found to be -7.5×10-5 m3/C at a certain
temperature. If the conductivity is found to be 200mho/m, calculate density of charge
carriers and their mobility. (3M, W-2013)
Ans.
Given: Hall coefficient RH = -7.5×10-5 m3/C,
Conductivity 𝜎 = 200mho/m.
(1) n=? (2) μ =?
1
(1) RH = − 𝑛𝑒
1
or n = − R
H𝑒
1
=− = 8.32×1022/m3.
−(7.5×10−5 ×1.602×10 −19

(2) 𝜇𝐻 = Hall mobility = RH σ

= 7.5 × 10−5 ×200mho/m
= 0.015 m2/V.s

27
 Advanced Engineering Materials

___________________________________________________________________________

9. N-type germanium sample has a donor density of 1021 / m3. It is arranged in a Hall
experiment having magnetic field of 0.5 T and the current density is 500 A/m2. Find the Hall
voltage if the sample is 3 mm wide. (3M, S-2014)

Ans.

Given: n = donor density of 10 21 / m3,

B= 0.5T,
Current density ‘J’= 500 A/m2,
width of sample ‘w’= 3mm = 3×10-3m.
Hall Voltage VH =?
𝑉𝐻
𝐸
RH = 𝐽 𝐻𝐵 = 𝑤
𝐽𝑥 𝐵
𝑥
𝑉𝐻 1
= =
𝑤𝐽𝑥 𝐵 𝑛𝑒
𝑤𝐽𝑥 𝐵
or 𝑉𝐻 = 𝑛𝑒
3×10−3 ×500×0.5
=
1021 ×1.602×10−19
= 4.68×10-3Volts= 4.68mV

10. Calculate the value of Hall angle for a given semiconductor from given data. R H = 3.66
×10-4 m3/C, ρ = 8.3 ×10-3 Ω-m, B= 0.5 Wb/m2. (2M, W-2012)

Ans.:
Given: RH = 3.66 ×10-4 m3/C,
Ρ = 8.3 ×10-3 Ω-m,
B= 0.5 Wb/m2.
Hall angle θH =?
Hall angle θH = tan−1(μH B)
1
= tan−1(𝑅𝐻 ρ 𝐵)
1
= tan−1(3.66 × 10−4 × 8.3×10−3 × 0.5)
= tan−1(0.02205)
=1.263o

11. Find d.c. current gain for a PNP transistor in a common emitter mode if collector
current is 2mA and base current is 20μA. (3M, W-2016)
Ans.

Given: Ic = 2mA,
IB = 20μA,
β =?
IC
Solution: β=
IB

2mA
=
20μA

2×10−3
= = 100.
20×10−6

28
 Advanced Engineering Materials

12. In an NPN transistor in a common base configuration emitter current is 2mA and base
current is 20μA.What are the values of collector current and current gain?
(3M, W-2011, 2017)
Ans.:

Given: IE = 2mA,

IB = 20μA =20×10-3mA = 0.02mA,

(1) IC =? (2) α =?

Solution: (1) IC = IE - IB = (2-0.02) mA

= 1.98 mA
I 1.98mA
(2) α = IC = 2mA
= 0.99
E

13.When a diode is forward biased a current of 50 mA flows through it. When it is reverse
biased the current drops to 20 nA. What is the ratio of forward to reverse current?

Ans.:
Given: Forward current, 𝐼𝐹 = 50 𝑚𝐴 = 50 × 10−3 𝐴
Reverse current, 𝐼𝑅 = 20 𝑛𝐴 = 20 × 10−9 𝐴
𝐼𝐹 50 ×10 −3 𝐴
Solution: = = 2.5 × 106
𝐼𝑅 20 ×10 −9 𝐴

14. A transistor is connected in the CE configuration. The collector supplies voltage of 10V
and the voltage drop across 500 ohms is 0.6V. If α = 0.96, find the (i) Collector-emitter
current (ii) emitter current (iii) base current.
Ans.
Given: VCC = 10 V
Voltage drops across collector VC = 0.6 V
RC = 500 ohms
Current gain = α = 0.96,
(1) VCE =? (2) IE =? (3) IB =?

Solution: i) VCE = VCC - VC = 10-0.6 = 9.4V

𝐼
ii) α = (𝐼𝐸𝐶 )

𝑉𝐶 0.6
Collector current, IC = = = 1.2 𝑚𝐴
𝑅𝐶 500

𝐼 1.2 𝑚𝐴
𝑜r I E = 𝛼𝐶 = 0.96 = 1.25 mA
iii) IB = I E - IC = 1.25mA - 1.2 mA = 0.05mA.

15. For a transistor working as a common base amplifier, current gain is 0.96. If the emitter
current is 7.2mA, then calculate the base current.

Ans.
Given α = 0.96
IE = 7.2mA
IB =?
IB =?
Solution: Current gain α = IC / IE
Therefore IC = αIE = 0.96 x7.2 = 6.91 mA

29
 Advanced Engineering Materials

IB = IE – IC

IB = 7.2 mA - 6.91 mA

IB = 0.29 mA.

16. In a npn transistor circuit, the collector current is 15 mA. If 95% of the electrons emitted
by the emitter reaches the collector, what is the base current?

Ans.
Given: Collector current, IC = 15 mA
IC = 95% IE
IB =?
Solution: Since IC = 95% IE , IC = 0.95 IE
𝐼𝐶
𝐼𝐸 = 0.95
Since IE = IB + IC
Base current, IB = IE – IC
𝐼
IB = IE – IC = 𝐶 − 𝐼𝐶
0.95
15
𝐼𝐵 = − 15 = 0.79 mA
0.95

17.The base current of a transistor is 105 μA and collector current is 2.05 mA. Determine the
value of β, IE, and α. A change of 27 μA in the base current produces a change of 0.65 mA in
the collector current. Find βa.c.
Ans.
Given: IB = 105 μA =105 × 10-6 A,
IC = 2.05 mA = 2.05 × 10-3A
(1) IE =? (2) α =? (3) β =? (4) βa.c.=?

Solution: (1) IE = IB + IC
= (105 × 10-6 +2.05 × 10-3) A
= 2.155 × 10-3 A
(2) α = IC / IE= 2.05 × 10-3A /2.155 × 10-3A
= 0.95
(3) β = IC / IB = 2.05 × 10-3A /105 × 10-6 A
= 19.52
(4) ΔIB = 27μA = 27 × 10-6 A
ΔIC = 0.65mA = 0.65 × 10-3 A
β = ΔIC / ΔIB = 0.65 × 10-3 A/27 × 10-6 A
=24.1

18.A transistor has current gain factor α = 0.95. the transistor is connected in common-
emitter configuration. Calculate the change in collector current when the base current is
changed by 0.1 mA.

Ans.
Given: α = 0.95
Change in base current ΔIB = 0.1 mA
∆𝐼𝐶 = ?
Solution: ΔIC = β ΔIB
𝛼
But, 𝛽 = 1− 𝛼
𝛼
∴ ∆𝐼𝐶 = ∆𝐼𝐵
1− 𝛼
0.95
∆𝐼𝐶 = (0.1) = 1.9 𝑚𝐴
1 − 0.95

Question Bank

30
 Advanced Engineering Materials

Q1. What is PN junction diode. Explain the characteristics of PN junction diode in forward and
reverse bias mode.
Q2. What do you understand by avalanche breakdown process in reverse bias PN junction diode.
Q3. What is rectification?
Q4. Explain how PN junction diode can be used as half wave rectifier.
Q5. What is bridge wave rectifier? Explain its working.
Q6. Explain the working of full wave rectifier.
Q7. What is the advantage of bridge rectifier over full wave rectifier?
Q8. How is half wave rectification different from full wave rectification, explain with the
help of diagram.
Q9. Draw circuit symbol of Zener diode.
Q10. What is Zener diode. Explain its VI characteristics in forward and reverse bias.
Q11. State the applications of Zener diode.
Q12. What is Zener breakdown process? Explain.
Q13. Write a note on LED.
Q14.What are uses and applications of LED?
Q15. Explain the construction and working of LED.
Q16. Why Silicon and Germanium cannot be used in fabrication of LED.
Q17. Draw V-I characteristics of photodiode. Explain dark current.
Q18.What is a photodiode. Explain its working principle.
Q19. What are the modes of operation of photodiode?
Q20. State the applications of photo diode.
Q21.Draw the circuit symbol of (1) Tunnel diode (2) Photodiode.
Q22.What is tunnel diode. Explain its working.
Q23. State the applications of tunnel diode.
Q24. Write short notes on
(a)Zener diode (b) Tunnel diode (c) LED (d) Photodiode
Q25.How does a transistor work as amplifier in Common base mode?
Q26. Define (1) current gain α (2) current gain β (3) Voltage gain A v.
Q27.Define Voltage gain Av in Common emitter and common base mode of an amplifier.
Q28. Give the relation between current gain α and β.
Q29. Explain the formation of energy bands in solids on the basis of band theory of solids.
Q.30 Distinguish between conductors, semiconductors and insulators.
Q.31 Prove that the probability function is symmetrical about EF at all temperatures except zero.
Q.32 Explain in brief the concept of Fermi energy. Derive an expression for Fermi energy in
intrinsic semiconductor.
Q.33 Define Fermi level.
Q.34 Draw energy band diagram for N- type semiconductor at 0 K and T K.
Q.35 Draw energy band diagram for P- type semiconductor at 0 K and T K.
Q.35When donor impurities are added to a semiconductor, the concentration of holes decreases.
Explain with reasons.
Q.36 Distinguish between intrinsic and extrinsic semiconductors with suitable examples.
Q.37 Explain the detailed mechanism of current conduction in N-type and P-type semiconductors.
Q.38Explain Hall effect. Obtain an expression for Hall coefficient and density of charge carriers
for a P- type semiconductor.
Q.39 Explain the formation of potential barrier across the junction region of semiconductor diode.
Q.40 Explain the concept of diffusion current and drift current in a P-N junction diode.
Q.41 Draw the energy band diagram for symmetrically doped P-N junction when it is (i) Forward
biased (ii) Reverse biased.
Q.42 Explain why in a transistor: (i) Base is thin & lightly doped (ii) Collector region has large

31
 Advanced Engineering Materials

area (iii) Emitter is heavily doped.

Q.43 Explain the action NPN and PNP transistor when operated in Common base mode.
Q.44 Explain the action NPN and PNP transistor when operated in Common emitter mode.
Q. 45 Explain the input and output characteristics of NPN transistor when operated in Common
base mode.
Q.46 Explain the input and output characteristics of NPN transistor when operated in Common
emitter mode.
Q.47 What is current gain in a transistor? Derive its relation for common base mode and common
emitter mode transistor.
Q.48 What is tunnel diode, draw and explain its V-I characteristics.
Q.49 What is Zener diode, draw and explain its V-I characteristics.
Q.50 What is LED? Which factor decides the colour emitted out of it. Draw and explain its V-I
characteristics.
Q.51. A strip of n-type germanium semiconductor of width 1mm and thickness 1mm has a Hall
coefficient 102m3/C.If magnetic field used is 0.1T and current through the sample is 1mA,
determine the Hall voltage produced and also find carriers concentration of electron.
(3M Winter-2015, Summer-2019)
(Ans. VH = 1mV, concentration of electron = n = 6.24X1016/m3.)
Q.52. In Hall coefficient experiment a current of 2.5mA is sent through a metal strip having
thickness 0.2 mm and width 5 mm. The Hall voltage is found to be 0.15 mV when a magnetic field
of 200 Gauss is used. Calculate (a) carrier concentration (b) drift velocity of the carriers.
(3M, Summer-2016) (Ans. n= 1.04×1022/m3, vd = 1.5m/s.)
Q.53.Calculate the value of Hall voltage if observed Hall coefficient 5m3/C for a current of 1mA
flowing through a specimen of 20 mm thickness placed suitably in a magnetic field of flux density
1.0 wb/m2. (3M, Summer-2018) (Ans. VH =0 .01 V)
Q.54. If the emitter current is 6 mA and collector current is 5.75mA, calculate the value of D.C.
current gain in common base mode. (3M, Summer-2018) (Ans. α = 0.958)
Q.55. In a common base connection, current amplification factor is 0.9. If the emitter current is
1mA, determine the value of base current. (Ans.0.1 mA)
Q.34. In a common base configuration, IC = 0.95 mA and IB = 0.05 mA. Find the value of α.
(Ans. 0.95)
Q.56. In a common base configuration, α = 0.95. The voltage drops across 2 kΩ resistance which
is connected in the collector is 2V. Find the base current. (Ans. 0.05 mA)

Q.57. Calculate IE in a transistor for which β = 50 and IB = 20 μA. (Ans.1.02 mA)

*********

32
 Advanced Engineering Materials

33