I-1310 Spareparts Mastercopy 04012016

I-1310 | I-1310 - Impactor Crusher
P Y
C O
E R
ST
M A
Spare Parts Manual Reservedele

Reserveonderdelen Reservedeler
Pieces De Rechange Ricambi
Ersatzteile Reservdelar
Repuestos
®
Terex MPE,
Drumquin Road,
Omagh, Co. Tyrone,
N. Ireland, BT78 5PN
+44 (0) 2882 418700
+44 (0) 28 87 244294
Email: [email protected]
www.terex.com
P Y
C O
E R
ST
MA
PARTS BOOK INTRODUCTION
COPYRIGHT
No copies or reproductions may be made from this manual, parts lists or illustrations without
written prior consent of TEREX®. This manual complete or in part must not be loaned to a third party.
FINLAY is a registered trademark for portable screening plant manufactured by TEREX®.
SPARE PARTS – CONTENTS
1. GENERAL INFORMATION………………….………...…...............………………………….............................
2. SPARE PARTS ENQUIRY……………………….................……………………...............................................
3. UNDERSTANDING YOUR MACHINE SERIAL NUMBER.……………………………....................................
4. PARTS SUPPORT - GOOD PRACTISE ADVICE……………………………..................................................
PY
5. HOW TO READ YOUR TRACK IDENTIFICATION PLATE……………………………....................................
O
6. WHERE TO FIND YOUR ENGINE SERIAL PLATE……………………….……..............................................
C
R
7. FINDING THE SOFTWARE VERSION OF YOUR PDM AND PLC.…………...............................................
T E
8. MACHINE NAVIGATION.........................................……………………………...............................................
A S
9. PAINT CODES...............................……..………………….............................................................................
TEREX® FINLAY
DRUMQUIN ROAD, OMAGH, CO.TYRONE N.IRELAND, BT78 5PN
TEL: +44(0)2882 418700
244294 (SALES) - 252740 (TECHNICAL) - 418888 (HELPDESK)
EMAIL: [email protected]
WEBSITE: www.terexfinlay.com
TEREX® reserves the right to change specification without prior notice.

1. GENERAL INFORMATION
• When purchasing Spareparts customers should in their own interest, always use genuine
Terex parts.
• Spare parts must comply with the technical requirements specified by the manufacturer.
• Only spare parts from the original equipment manufacturers can be relied to do so.
• Spares parts that have not been supplied by Terex cannot be relied upon for correct material,
dimensions or finish.
• Terex cannot therefore be responsible for any damage arising from use of any such parts and
the Guarantee will be invalid.
2. SPARE PARTS ENQUIRY
Y
When enquiring please quote:
P
• Machine Serial Number
O
• Part Catalog Figure Number and Item Number
• Part Number
R C
E
• Part Description
T
• Quantity Required
A S
M
NOTE:
Orders for spare parts must be sent to your local dealer.
To find out whom your local dealer is please log on to www.terexfinlay.com and use the Dealer
Search function.
3. UNDERSTANDING YOUR MACHINE SERIAL NUMBER
I-130
2011
TRX00694ADGEB9675
51500 KG
TRX130ICHOM87310
TRX130RSHOMA71029
TRX 00694 A DG E B 9675-

TRX 130RS H OM A 7 1029
PY
O
Terex Model
Check Digit
R C
E
Month Code
S T Plant Code
MA Year Code Sequence Number
Year Code Month Code

2010 A JANUARY 1
2011 B FEBRUARY 2
MARCH 3
2012 C
APRIL 4
2013 D MAY 5
2014 E JUNE 6
F JULY 7
2015
AUGUST 8
SEPTEMBER 9
OCTOBER A
NOVEMBER B
DECEMBER C
4. PARTS SUPPORT - GOOD PRACTISE ADVICE
Be aware there are enquires where the parts should not be supplied without firstly obtaining
the Machine Serial Number and checking the record card. The main components to consider
are:
HYDRAULIC PUMPS
Pumps vary depending on the options fitted to your machine. This is why the pumps are gener-
ally not part-coded in the parts book.
TRACK PARTS
Terex have 3-4 Track suppliers. Each track type is illustrated in the part book. It is important to
select the parts from the correct supplier. See Section 6 Where to find your Track Identification
Y
Plate.
ENGINE PARTS
O P
R C
The engine fitted to your machine can vary due to the customer preference (i.e. Deutz, CAT).
E
Alternatively it can differ due to machine options fitted (some options require a higher spec en-
T
gine) or simply a change over time as suppliers update engines to meet emission regulations.
A S
It is therefore important to obtain the engine serial number to order parts. This information can
M
be obtained from the engine plate, or from the machine record. See Section 7 Where to find
your Engine Serial Plate.
ELECTRICS
Control Panels, PC Boards, Hetronic Remotes - these items are serial number dependant and
will have ther serial numbers located on the part. See Section 8 Finding the Software Version
of your PDM and PLC.
5. WHERE TO FIND YOUR TRACK IDENTIFICATION PLATE
It is necessary when ordering any track spare parts, that all numbers relating to the tracks are
quoted along with your machine serial number..
The identification plate is located on the outside face of each left and right hand track. On
some occasions the Serial Number can be found stamped in the skid plate or track frame. Be-
low is the current range of tracks fitted to our machines.
Track Frame Skid Plate
PY
C O
E R
Identification Plate Locations
S T
MA
6. WHERE TO FIND YOUR ENGINE SERIAL PLATE
It is necessary when ordering any engine spare parts, that all numbers relating to the engine
are quoted along with your machine serial number..
Depending on the engine fitted, the serial plate can be found either on the left / right side of the
engine and in some cases on top. The spares department need all of these numbers in order to
determine the
components that were included with the engine. This permits accurate identification of re-
placement part numbers.
Above
PY
C O
E R
S T
MA
Right Hand Side Left Hand Side
Caterpillar
Deutz
Scania
7. FINDING THE SOFTWARE VERSION OF YOUR PDM AND PLC
It is necessary when ordering a new PLC or PDM that you note all numbers relating to them,
please quote these numbers along with your machine serial number.
When you turn on the screen take note of the details from the bottom of the start up page. The
identification sticker which displays the software version is located on the outside of each the
PLC and PDM.
SOFTWARE VERSION
V2050_PDMng_V00t
22.06.2015 MMG
Y
PDM File:- V2050_PDMng_v00n_Bowl
PLC File:- V2050_PLC_v
P
SOFTWARE VERSION
O
V2050_PLCng_V00t
22.06.2015 MMG
PDM File:- V2050_PDMng_v00n_Bowl
R C
E
PLC File:- V2050_PLC_v
S T
MA
8. MACHINE NAVIGATION
The following will help you determine your location in relation to your machine.
Please note that the Feed End is always the Back of your machine.
Crusher
Right Hand Side
Feed End
Front Back
Y
Discharge
P
End
O
Left Hand Side
R C
T E
S
Screener Right Hand Side
MA
Feed End
Front Back
Discharge
End
Left Hand Side

9. PAINT CODES
Finlay Red - RAL 2002 (RGB 194/51/28)
Terex White - RAL 1013 (RGB 241/235/213)
Terex Grey - RAL 7024 (RGB 85/87/92)
Terex Black - RAL 9005 (RGB 0/0/0)
Terex Red - RAL 3020 (RGB 211/23/31)
PY
C O
E R
S T
MA
P Y
THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK
C O
E R
ST
M A
Table of Contents
Figure Description Page

01-01 I-1310 CRUSHER MACHINE SUMMARY 1
02-01 CHASSIS ASM 3
02-02 WATER PUMP ASM (OPTION) 7
02-03 MAGNET ASM UPTO SERIAL NO. FJP570092 9
02-04 MAGNET ASM FROM SERIAL NO. FJP570093 11
03-01 TRACK ASM 13
03-02 PART LISTINGS FOR 883MKII/I-1310/J-1160 TEREX TRACKS 15
03-03 STRICKLAND TRACKS ASM 19
03-04 STRICKLAND TRACKS - INTERGRATED INTO GEARBOX 21
03-05 TRACKLINE TRACKS ASM 23
04-01 VGF FEEDER BOX ASM 27
04-02 VGF INCLINED ASM 29
PY
04-03 VGF VIBRATING UNIT ASM 31
O
04-04 HOPPER WITH EXTENSIONS OPTION ASM UPTO SERIAL NO. FJP580107 35
C
04-05 HOPPER WITH EXTENSIONS OPTION ASM FROM SERIAL NO. FJP580108 37
05-01
E R
POWERUNIT ASM UPTO SERIAL NO. FJP570050 39
T
05-02 ENGINE COMPARTMENT UPTO SERIAL NO. FJP570050 43
05-03
A S
ENGINE ASM UPTO SERIAL NO. FJP570050 47
M
05-04 POWERUNIT ASM FROM SERIAL NO. FJP570051 UPTO FJP570095 51
05-05 POWERUNIT ASM FROM SERIAL NO. FJP570096 UPTO FJP580134 55

INCLUDING FJP580138
05-06 ENGINE COMPARTMENT FROM SERIAL NO. FJP570051 UPTO FJP580134 59
INCLUDING FJP580138
05-07 ENGINE ASM FROM SERIAL NO. FJP570051 UPTO FJP580134 INCLUDING 63
FJP580138
05-08 POWERUNIT ASM FROM SERIAL NO. FJP580135 EXCLUDING FJP580138 67
05-09 ENGINE COMPARTMENT FROM SERIAL NO. FJP580135 EXCLUDING 71

FJP580138
05-10 ENGINE ASM FROM SERIAL NO. FJP580135 EXCLUDING FJP580138 75
05-11 CONTROL BOX ASM 79
06-01 HYDRAULIC TANK ASM 81
07-01 FUEL TANK ASM 83
08-01 IMPACTOR ASM UPTO SERIAL NO. FJP580134 INCLUDING FJP580138 85
08-02 IMPACTOR ASM FROM SERIAL NO. FJP580135 EXCLUDING FJP580138 89
08-03 ROTOR ASM 93
08-04 IMPACT APRON ASM 95
08-05 SPINDEL SUSPENSION FOR FRONT IMPACT APRON 97
08-06 SPINDEL SUSPENSION FOR REAR IMPACT APRON 99

08-07 INLET DOOR ASM 101
08-08 WEAR PLATES ASM 103
08-09 CRUSHER UNIT HYDRAULICS 107
08-10 GRINDING PATH (OPTION) 109
08-11 IMPACTOR MISCELLANEOUS 1 111
08-16 IMPACTOR MOTOR DRIVE ASM UPTO SERIAL NO. FJP570023 121
08-17 IMPACTOR MOTOR DRIVE ASM FROM SERIAL NO. FJP570024 UPTO 125
FJP580113
08-18 IMPACTOR MOTOR DRIVE ASM FROM SERIAL NO. FJP580114 UPTO 129
FJP580134 INCLUDING FJP580138
08-19 IMPACTOR MOTOR DRIVE ASM FROM SERIAL NO. FJP580135 133
EXCLUDING FJP580138
Y
10-01 MAIN CONVEYOR ASM 137
P
10-02 MAIN CONVEYOR 1ST SECTION ASM 139
O
10-03 MAIN CONVEYOR 2ND SECTION ASM 141
10-04
R C
MAIN CONVEYOR HEAD SECTION ASM UPTO SERIAL NO. FJP580140 145
E
EXCLUDING FJP580135
T
10-05 MAIN CONVEYOR HEAD SECTION ASM FROM SERIAL NO. FJP580141 149
INCLUDING FJP580135
S
10-06 MAIN CONVEYOR TELESCOPICS ASM 153
10-07
10-08
10-09 MA DIRT CONVEYOR ASM (OPTION)
DIRT CONVEYOR 1ST SECTION ASM (OPTION)
DIRT CONVEYOR 2ND SECTION ASM (OPTION)

155
157
161
10-10 DIRT CONVEYOR ASM (TELESCOPIC) (OPTION) 165
10-11 DIRT CONVEYOR 1ST SECTION ASM (TELESCOPIC) (OPTION) 167
10-12 DIRT CONVEYOR 2ND SECTION ASM (TELESCOPIC) (OPTION) 171
11-01 CATWALK ASM 175
12-01 ELECTRIC COMPONENTS 1 177
12-05 ELECTRIC SCHEMATICS 193
13-01 MAIN BUILD HYDRAULICS 1 195

13-06 HYDRAULIC CIRCUIT DIAGRAM WITHOUT WATERPUMP 207
13-07 HYDRAULIC CIRCUIT DIAGRAM WITH WATERPUMP 209
13-08 HOPPER HYDRAULICS 211
13-09 MAIN CONVEYOR HYDRAULICS 213
13-10 DIRT CONVEYOR HYDRAULICS 215
13-11 POWERUNIT HYD 1 FROM FJP570051 UPTO FJP570095 217
13-12 POWERUNIT HYD 2 FROM FJP570051 UPTO FJP570095 221
13-13 POWERUNIT HYD 1 FROM FJP570096 UPTO FJP580134 INCLUDING 225

FJP580138
FJP580138
FJP580138
14-01 UNDERTRAY FEEDER ASM 233
14-02 BY-PASS CHUTE ASM UPTO SERIAL NO. FJP570086 235
14-03 BY-PASS CHUTE ASM FROM SERIAL NO. FJP570087 237
P Y
C O
E R
S T
MA
FIGURE: 01-01
HOPPER WITH EXTENSIONS

OPTION ASM
VGF FEEDER BOX ASM
IMPACTOR ASM
M
POWERUNIT ASM
ILLUSTRATION: ILLUSTRATION 8.3.1
A
HYDRAULIC TANK ASM
NAME: I-1310 CRUSHER MACHINE SUMMARY
MISCELLANEOUS - MAGNET
S
ETC ASM
MAIN CONVEYOR
TELESCOPICS ASM
T
MAIN CONVEYOR ASM
E
CHASSIS ASM
R
DIRT CONVEYOR ASM
TELESCOPIC DIRT
CONVEYOR ASM
C
CATWALK ASM
O P
DIESEL TANK ASM
TRACKS ASM
CONTROL BOX ASM

Y
Page
REV:
MACHINE: I-1310 CRUSHER
1
NAME: I-1310 CRUSHER MACHINE SUMMARY MACHINE: I-1310 CRUSHER
FIGURE: 01-01 REV: A
Item Part No Rev Description Qty
[Figure End]
P Y
C O
E R
S T
MA
Page 2
NAME: CHASSIS ASM MACHINE: I-1310 CRUSHER
ILLUSTRATION: ILLUSTRATION 8.3.2A
20
29
28
24
26
27
14
25
9
Y
8
12
P
11
O
10
C
30
17
2
E R 6
S T 13
MA 1
18
15
21
35
31
3
34
32
33
23
7
22
16
4
19
Page 3
1 1310.01.27 0 TRACK GEARBOX GUARD 1
2 12.04.0003 0 3/4" BRASS GATE VALVE 2
3 1310.01.10 0 BOLT MOUNTING FLAT 3
4 SEE_NOTE_5 0 SEE HYDRAULIC DIAGRAM 2
5 14.02.0023 0 EMERGENCY STOP 4

ORDER PART NO. 14.85.1028
5 14.85.1028 0 EMERGENCY STOP BOX 4
6 1310.01.04 0 FEEDER MOUNTING BRACKET - REAR 2
7 1310.01.20 0 HYD BANK MNT 1
8 1310.01.22 0 MAIN CONVEYOR GUIDE - LHS 1
9 1310.01.21 0 MAIN CONVEYOR GUIDE - RHS 1
PY
10 1310.01.09 1 SIDE GUARD 1
O
12 1310.01.07 1 SPRING SEAT - FRONT 2
C
13 1310.01.06 1 SPRING SEAT - REAR 2
14 381510210
E R 0 381510210 PIN 2
S T
15 1310.01.08 0 TRACK MOUNTING BRACKET 2
A
16 1312.01.05 1 BOLT MOUNTING FLAT 1
M
17 1310.01.05 1 FEEDER MOUNTING BRACKET - FRONT 2
18 1310.01.01 2 CHASSIS MWA 1
19 1310.01.28 0 TRACK GEARBOX GUARD 1
20 1310.01.03 2 MAIN CONV / MAGNET SUPPORT 1
21 31.02.1702 0 MANIFOLD (ORIGINALLY 1175.29.02) 1
24 1310.01.29 0 TOOL BOX MTG BRKT 1
25 12.51.0040 0 TOOL BOX 1

UPTO SERIAL NO. FJP570095 - KEY MATCHES TOOL BOX & IF KEY IS LOST
NEW TOOL BOX PART NO. 12.51.0041 IS REQUIRED ECO4894
25 12.51.0041 0 TOOL BOX 1

FROM SERIAL NO. FJP570096 - TOOL BOX PART NO. 12.51.0041 IS A DIRECT
REPLACEMENT OLD TOOL BOX PART NO. 12.51.0040 ECO4894
25 12.51.0042 0 KEY FOR TOOL BOX PART NO. 12.51.0041 1

FROM SERIAL NO. FJP570096 ECO4894
26 1175.17.33 2 TOOLBOX STRAP 2
Page 4
27 12.02.0028 0 HAMMER LOCK G864 2

QUANITY OF 4 UPTO SERIAL NO. FJP570095 ECO4964
28 12.02.0027 0 CHAIN 2
QUANITY OF 4 UPTO SERIAL NO. FJP570095 ECO4964
29 1310.01.52 0 MAGNET MOUNT 1
30 12.15.0016 0 3/4" X 1/2" NIPPLE 2
31 12.15.0012 0 3/4" HEX NIPPLE 2
32 12.15.0012 0 3/4" HEX NIPPLE 2
33 12.15.0014 0 3/4" FEMALE TEE 2
34 31.10.0749 0 3/4" BSTP X 3/4" TAIL 2
35 12.15.0020 0 1/2" BALL VALVE 2
[Figure End]
P Y
C O
E R
S T
MA
Page 5
P Y
C O
E R
S T
MA
Page 6
FIGURE: 02-02
(FROM FORWARD CONVEYOR CIRCUIT)
M
HYDRAULIC HYDRAULIC WATER WATER
RETURN SUPPLY FEED PUMPED
TO TANK IN IN OUT
NAME: WATER PUMP ASM (OPTION)
ILLUSTRATION: ILLUSTRATION 8.3.2B
SA
TE
WATER
PUMPED
HYDRAULIC OUT
R
SUPPLY
IN
C
WATER
HYDRAULIC
FEED
RETURN
IN
TO TANK
O P Y
Page
REV:
7
NAME: WATER PUMP ASM (OPTION) MACHINE: I-1310 CRUSHER
1 31.12.0383 0 FLOW CONTROL VALVE 1
2 31.10.0437 0 HYDRAULIC GEAR MOTOR DIRECT REPLACEMENT 1

FOR PART NO. 31.12.0392
3 31.12.0385 0 MOTOR MOUNT 1
4 31.12.0386 0 DRIVE COUPLING 1
5 31.12.0387 0 FOOT MOUNT WATER PUMP 1
6 31.12.0388 0 DRY RUNNING STACK 1
7 31.12.0389 0 BASE PLATE 1
8 31.12.0390 0 DRIVE COUPLING COVER 1
9 31.12.0391 0 3 WAY BALL VALVE 1
Y
[Figure End]
O P
R C
TE
A S
M
Page 8
NAME: MAGNET ASM UPTO SERIAL NO. FJP570092 MACHINE: I-1310 CRUSHER
27
24 26
14
17
1
P Y
C O
E R
T
2
A
15
S 19
M
21 18 5
10 8
9
3
20
16
22
23
11
4
12
6
7
13
Page 9
NAME: MAGNET ASM UPTO SERIAL NO. FJP570092 MACHINE: I-1310 CRUSHER
1 12.45.0030 0 FRAME 1
2 12.45.0031 0 MAGNET 1
3 10.25.5230 0 HYDRAULIC MOTOR 1
4 12.45.0032 0 DRIVE PULLEY 1
5 12.45.0033 0 NON-DRIVE PULLEY 1
6 11.02.0300 0 BEARING 4
7 11.02.0302 0 END CAP 3
8 12.45.0034 0 BEARING BACKING PLATE 2
9 12.45.0035 0 BEARING TAKE UP PLATE 2
10 12.45.0036 0 BEARING SPACER PLATE 2
PY
11 12.45.0037 0 SIDE PLATES LH 1
O
12 12.45.0038 0 SIDE PLATES RH 1
C
13 12.45.0039 0 BELT 1
14 12.45.0040
E R 0 EYENUT 4
S T
15 13.04.8445 0 TAPER LOCK 1
A
16 12.45.0041 0 MOTOR MOUNTING PLATE 1
M
17 12.45.0042 0 TOP COVER 1
18 12.45.0043 0 PINCH GUARD DRIVE SIDE 1
19 12.45.0044 0 PINCH GUARD NON DRIVE SIDE 1
20 12.45.0045 0 MOTOR/COUPLING GUARD 1
21 13.06.4005 0 COUPLING HALF 2
22 13.06.4205 0 RUBBER INSERT 1
23 13.04.8448 0 TAPER LOCK 1
24 12.45.0017 0 MAGNET 1
COMPLETE MAGNET ASSEMBLY
26 12.02.0028 0 HAMMER LOCK G864 4
27 12.02.0027 0 CHAIN 4
[Figure End]
Page 10
NAME: MAGNET ASM FROM SERIAL NO. FJP570093 MACHINE: I-1310 CRUSHER
25
18
15
PY
16
1
3
C O 6
R
9
TE
S
14
A
11
21
M 10
14
7
17
4 22 20 19 12 5 13
Page 11
NAME: MAGNET ASM FROM SERIAL NO. FJP570093 MACHINE: I-1310 CRUSHER
1 TXT0400001 0 FRAME DRIVE SIDE 1
2 TXT0400002 0 FRAME NON DRIVE SIDE 1
3 TXT0400003 0 MAGNET 1
4 TXT0400004 0 HYDRAULIC DRIVE MOTOR 1
5 TXT0400005 0 DRIVE PULLEY 1
6 TXT0400006 0 NON DRIVE PULLEY 1
7 TXT0400007 0 BEARING 4
8 TXT0400008 0 BEARING CAP 3
9 TXT0400009 0 BEARING BACKING PLATE 2
10 TXT0400010 0 BEARING TAKE UP PLATE 2
PY
11 TXT0400011 0 BEARING SPACER PLATE 2
O
12 TXT0400012 0 SIDE PLATE DRIVE SIDE 1
C
13 TXT0400013 0 SIDE PLATE NON DRIVE SIDE 1
14 TXT0400014
E R 0 INNER GUARD 2
S T
15 TXT0400015 0 TOP PLATE NON DRIVE SIDE 1
A
16 TXT0400016 0 TOP PLATE DRIVE SIDE 1
M
17 TXT0400017 0 BELT 1
18 TXT0400018 0 EYENUT 1
19 TXT0400019 0 COUPLING ASSEMBLY 1
20 TXT0400020 0 MOTOR MOUNTING PLATE 1
21 TXT0400021 0 LOCATION PLATE 1
22 TXT0400022 0 MOTOR/COUPLING GUARD 1
25 TXT04000100 0 MAGNET COMPLETE 1
[Figure End]
Page 12
NAME: TRACK ASM MACHINE: I-1310 CRUSHER
6
5
2
P Y
CO
E R
S T
MA
1
Page 13
NAME: TRACK ASM MACHINE: I-1310 CRUSHER
1 1310.50.02 0 TRACK ASM LHS 1
2 12.95.0884R 0 TRACK RHS 1
3 683.50.12 0 TRACK STEP 1
4 10.17.0045 0 GREASE HOSE 1
5 10.38.1145 0 GREASE COUPLER 1
6 10.23.5018 0 PRESSURE GUAGE 1
[Figure End]
P Y
C O
E R
S T
MA
Page 14
FIGURE: 03-02
SOME TRACK PARTS

27 DEPEND ON THIS
20 REFERENCE NUMBER,
18 SEE PART LISTINGS
TXG70000100_3
TB**** / *** ** / ****

8
21
M
23 28
6 2 9
7 22
34 14
A
5 15
11
4
S
31 12
19
1
24 26 13
T
16
29 10 35
25
36
E
33
R
3
NAME: PART LISTINGS FOR 883MKII/I-1310/J-1160 TEREX TRACKS
17 40
32 38
C
39
37
O P Y
REV:
Page 15
A
NAME: PART LISTINGS FOR 883MKII/I-1310/J-1160 TEREX TRACKS MACHINE: I-1310 CRUSHER
1 TXC80000100 0 GREASE GUN ADAPTER 1
2 TXF02000101 0 GREASE POINT COVER 2
3 TXF20000101 0 IDLER GUARD ASSY PAIR 2
4 TXF42000102 0 LOCK PIN 2
5 TXF42000103 0 MASTER TRACK PIN 2
6 TXF42000104 0 TRACK SPACER 4
7 TXF42000105 0 WASHER 8
8 TXF42000106 0 TRACK FRAME RH 1
8 TXF42000107 0 TRACK FRAME LH 1
9 TXH04000101 0 HYDRAULIC MOTOR 2
PY
10 TXH15000101 0 MOTION CONTROL VALVE 2
O
11 TXH30000100 0 HOLLOW HEX PLUG - 1/8 22
C
12 TXH30000101 0 HOLLOW HEX PLUG - 1/4 14
13 TXH30000102
E R 0 HOLLOW HEX PLUG - 3/4 4
S T
14 TXH30000103 0 BANJO FITTING 4
A
15 TXH40000101 0 HOSE AND FITTINGS 2
M
16 TXM60000100 0 GREASE NIPPLE 2
17 TXM60000101 0 GREASE USIT RING 2
18 TXN20000101 0 GEAR BOX 2
19 TXN30000102 0 TRACK LINK ASM 2
20 TXN30000103 0 SPROCKET 2
21 TXR050000111 0 BOLT 36
22 TXR050000112 0 HEX SCREW 4
23 TXR05000100 0 SHOE BOLT 392
24 TXR05000101 0 SHOE NUT 392
25 TXR05000106 0 BOLT 56
26 TXR05000107 0 WASHER 128
27 TXR05000109 0 BOLT 36
28 TXR05000110 0 SCREW 4
29 TXR05000119 0 BOLT 4
Page 16
NAME: PART LISTINGS FOR 883MKII/I-1310/J-1160 TEREX TRACKS MACHINE: I-1310 CRUSHER
31 TXT04000112 0 ROLLER GROUP 14
32 TXT04000118 0 TRACK TENSION & RECOIL ASM 2
33 TXT04000117 0 LOOSE IDLER ASM WITH COLLAR 2
34 TXV99000101 0 TRACK SHOE 98
35 TXG70000102GRY 0 LH TRACK 1
35 TXG70000103GRY 0 RH TRACK 1
36 TXN34000101 0 HYDRAULIC TRACK DRIVE 2
37 TXT04000116 0 IDLER GROUP C/W SPRING 2
38 TXT04000111 0 MASTER PIN SET 2

INCLUDES ITEMS 4, 5, 6 & 7
39 TXT04000123 0 LINK ASSEMBLY REPAIR KIT 1
40 TXR050000111 0 BOLT 12
[Figure End]
P Y
C O
E R
S T
MA
Page 17
P Y
C O
E R
S T
MA
Page 18
NAME: STRICKLAND TRACKS ASM MACHINE: I-1310 CRUSHER
ILLUSTRATION: ILLUSTRATION 8.3.4D
P Y
CO
E R
S T
MA
Page 19
NAME: STRICKLAND TRACKS ASM MACHINE: I-1310 CRUSHER
ILLUSTRATION: ILLUSTRATION 8.3.4D
1 12.99.0495 0 TRACK DRIVE GEARBOX C/W HYDRAULIC MOTOR 2
2 12.99.0489 0 SOCKET HEAD CAPSCREW 60
4 12.99.0468 0 OIL FILL/DRAIN PLUG 4
5 12.99.0469 0 GEAR OIL 1

8L
9 12.99.0496 0 DRIVE SPROCKET 2
10 12.99.0487 0 SOCKET HEAD CAPSCREW 60
11 12.99.0387 0 SINGLE FLANGED LOWER ROLLER 16
12 12.99.0388 0 HEX HEAD BOLT 64
13 12.99.0323 0 HARDENED WASHER 64
14 12.99.0327 0 FRONT IDLER GROUP 2
PY
15 12.99.0391 0 IDLER YOKE 2
O
16 12.99.0474 0 HEX HEAD BOLT 8
C
17 12.99.0397 0 SPRING WASHER 8
18 12.99.0330
E R 0 COIL SPRING RECOIL 8
S T
19 12.99.0395 0 GREASE TENSIONER 2
A
20 12.99.0392 0 HEX HEAD BOLT 4
M
21 12.99.0397 0 SPRING WASHER 4
22 12.99.0332 0 TENSIONER GREASE FITTING 2
23 12.99.0333 0 GASKET FOR GREASE FITTING 2
23 12.99.0334 0 GREASE GUN ADAPTOR 1
24 12.99.0493 0 TRACK GROUP 2
25 12.99.0494 0 TRACK LINK ASSEMBLY 2
26 12.99.0337 0 TRACK SHOE 104
27 12.99.0338 0 TRACK SHOE BOLT 416
28 12.99.0339 0 TRACK SHOE NUT 416
29 12.99.0341 0 TRACK REPAIR LINK KIT 1
30 12.99.0340 0 MASTER PIN WITH COLLARS 2
[Figure End]
Page 20
NAME: STRICKLAND TRACKS - INTERGRATED INTO GEARBOX MACHINE: I-1310 CRUSHER
ILLUSTRATION: ILLUSTRATION 8.3.4E
Y
1
O P
R C
TE
A S 1
M1
Parts for Part no:

DL334P-UA145DB-DT23
Page 21
NAME: STRICKLAND TRACKS - INTERGRATED INTO GEARBOX MACHINE: I-1310 CRUSHER
ILLUSTRATION: ILLUSTRATION 8.3.4E
1 12.99.0488 0 HOSE AND FITTING KIT 2
[Figure End]
P Y
C O
E R
S T
MA
Page 22
NAME: TRACKLINE TRACKS ASM MACHINE: I-1310 CRUSHER
ILLUSTRATION: ILLUSTRATION 8.3.4C
P Y
CO
E R
S T
MA
Page 23
1 12.99.0550 0 TRACK FRAME L.H 1
2 12.99.0551 0 TRACK FRAME R.H 1
3 12.99.0552 0 TRACK GUIDE 2
4 12.99.0539 0 TRACK GUIDE BOLT 20

NOT SHOWN
5 12.99.0404 0 TRACK GUIDE WASHER 20
NOT SHOWN
6 12.99.0554 0 HYDRAULIC GEARBOX, TRACKLINE REF: M1456/GNM 2
7 12.99.0553 0 GEARBOX/MOTOR COMPLETE 1

NOT SHOWN
9 12.99.0437 0 GEARBOX MOUNTING BOLT 40
10 12.99.0409 0 WASHER 40
PY
11 12.99.0438 0 HYDRAULIC HOSE KIT 1
NOT SHOWN
O
12 12.99.0439 0 HOSE ASSY - BRAKE LINE GEARBOX/VALVE 2
C
NOT SHOWN
13 12.99.0440 0 HOSE ASSY - DRAIN LINE MOTOR/VALVE 2
R
NOT SHOWN
E
14 12.99.0441 0 SEAL 2
T
NOT SHOWN
S
15 12.99.0442 0 SEAL 2
NOT SHOWN
A
16 12.99.0443 0 ADAPTER 2
M
NOT SHOWN
17 12.99.0444 0 ADAPTER 2
NOT SHOWN
18 12.99.0445 0 ADAPTER 2
NOT SHOWN
19 12.99.0446 0 STEEL MOTION VALVE 2
20 12.99.0447 0 VALVE MOUNTING BOLT 16
21 12.99.0555 0 SPROCKET 2
22 12.99.0556 0 SPROCKET MOUNTING BOLT 32
23 12.99.0409 0 WASHER 32
24 12.99.0557 0 TRACK GROUP COMPLETE 1
25 12.99.0558 0 LINK ASSEMBLY (51 LINK) 2
26 12.99.0528 0 MASTER PIN 2
27 12.99.0529 0 TRACK SHOE 102
28 12.99.0426 0 TRACKSHOE BOLT 408
29 12.99.0417 0 TRACK SHOE NUT 408
30 12.99.0530 0 IDLER GROUP 2
Page 24
31 12.99.0420 0 TRACK ADJUSTER GREASE VALVE 2
32 12.99.0421 0 TRACK ADJUSTER GREASE VALVE GASKET 2
33 12.99.0531 0 SPRING TENSIONER GROUP 2
34 12.99.0532 0 YOKE 2
35 12.99.0533 0 IDLER WHEEL C/W BRACKET & YOKE 2
37 12.99.0534 0 TRACK ROLLER 16
38 12.99.0535 0 ROLLER MOUNTING BOLT 64
39 12.99.0404 0 TRACK GUIDE WASHER 64
40 12.99.0617 0 COMPLETE SINGLE LINK REPAIR KIT 1

NOT SHOWN
[Figure End]
P Y
C O
E R
S T
MA
Page 25
P Y
C O
E R
S T
MA
Page 26
NAME: VGF FEEDER BOX ASM MACHINE: I-1310 CRUSHER
11
P Y
O 3
R C 7
10
8
TE
A S
M
1
2
4
Page 27
NAME: VGF FEEDER BOX ASM MACHINE: I-1310 CRUSHER
1 1310.05.04 0 LHS LINER PLATE 1
2 1310.05.11 0 LOAD CARRIER FLTS 2
3 20.1310.05.05 0 REAR BLANKING RUBBER 1
4 1310.05.05 0 RHS LINER PLATE 1
5 12.11.0028 0 SPRING 10
6 1310.05.03 1 BASE LINER PLATE 1
7 1310.05.07 1 BOLT ON SPRING BUTT 10
8 1310.05.08 1 BOTTOM SPRING BUTT 2
9 1310.05.24 1 SEALING RUBBERCLAMP 1
10 1310.05.06 1 SPRING MOUNT 2
P Y
11 1310.05.01 2 VIBRATORY FEEDER FRAME 1
O
[Figure End]
R C
TE
A S
M
Page 28
NAME: VGF INCLINED ASM MACHINE: I-1310 CRUSHER
10
8
3
2
15
17
21
12
6
1
P Y
C O 18
R
5
19
E 20
4
S T
7
MA
13
14
11
16
9
Page 29
NAME: VGF INCLINED ASM MACHINE: I-1310 CRUSHER
1 20.1310.05.04 0 20.15.0003 - SCREEN MESH CUSHION RUBBER 1
2 1310.05.18 0 BOLT-IN CROSSMEMBER 1
3 1310.05.25 0 GRIZZLY MOUNTING CLAMP 1
4 32.02.01020 0 M20 FORM C FLAT WASHER ZC BS 4320 8
5 26.44.10020 0 METRIC COURSE SET SCREW M10X20 GR 10.9 8
6 1310.05.20 0 MESH CLAMP 1
7 1310.05.02 0 REAR SPACING PLT ASSEMBLY 1
8 21.65.7706 0 SMALL VGF MESH - 30MM APERTURE 1
9 1310.05A 1 FEEDER BED AND VIBRATING UNIT 1

SEE ILLUSTRATION 8.3.33
10 1310.05.16 1 GRIZZLY FRAME LHS PLT - RECYCLING 1
PY
11 1310.05.17 1 GRIZZLY FRAME RHS PLT - RECYCLING 1
O
12 1310.05.19 1 MESH FRAME 1
C
13 20.1310.05.01 1 REAR MESH SEALING RUBBER 1
14 1310.05.24
E R 1 SEALING RUBBERCLAMP 1
S T
15 1310.05.71 0 STEPPED GRIZZLY BARS- 40MM 1
A
16 31.08.0053 0 VIBRATOR ASSEMBLY - 110 (L.M) 1
M
17 1310.05.73 0 BLANKED GRIZZLY CASSETTE 1
OPTION
18 26.41.16160 0 COACH BOLT 4
19 32.12.01016 0 HARDENED WASHER 4
20 1175.08.39 0 SPHERICAL WASHER 4
21 26.24.00016 0 NYLOC NUT 4
[Figure End]
Page 30
NAME: VGF VIBRATING UNIT ASM MACHINE: I-1310 CRUSHER
34
26
12
33
29
9
28
11
14
13
6
15
10
P Y
C O
1
E R
T
2
S 18
5
A
8
M
3
27
4
32
19
7
31
22
9
21
17
24
24
35
23
20
Page 31
1 99.10.0997 0 HOUSING VIB 1
2 99.10.0998 0 DRAIN PLUG 1" MAGNET 4
3 99.10.1000 0 PIPE PLUG 1/2" 1
4 99.10.1002 0 O-RING 4
5 99.10.1004 0 O-RING 1
6 99.10.1007 0 SKIRT 1
7 99.10.1009 0 SKIRT 1
8 99.10.0010 0 CARTRIDGE 4
9 99.10.0012 0 ** USE PART NO. 11.00.0148 ** 4
9 11.00.0148 0 BEARING 4
PY
10 99.10.0014 0 O-RING 2
O
11 99.10.0044 0 BELL HOUSING 1
C
13 99.10.0020
E R 0 COVER 1
S T
14 99.10.0022 0 O-RING 2
A
15 99.10.0025 0 SHAFT 2
M
17 99.10.0028 0 GEAR 2
18 99.10.0030 0 KEY 2
19 99.10.0032 0 END PLATE 2
20 99.10.0034 0 GEARCASE 1
21 99.10.0036 0 PIPE CAP 1
22 99.10.0038 0 BREATHER 1
UPTO SERIAL NO. FJP570023 ECO4304
22 10.23.6555 0 AIR BREATHER 1
FROM SERIAL NO. FJP570024 ECO4304 ITEMS 31 & 32 ADDED
23 99.10.0040 0 PIPE PLUG 1
24 99.10.0042 0 DRAIN PLUG 1
26 12.58.0025 0 1 1/2" BSP BUNG 1
27 99.10.0048 0 RETAINER 2
28 31.10.0043 0 COUPLING - HALF 1
29 31.10.0041 0 COUPLING INSERT 1
31 10.12.0027 0 3/4" BONDED SEAL 1
Page 32
32 10.01.1118 0 3/4" X 3/4" M/M ADAPTOR DIN 3852-A 1
33 31.10.0045 0 COUPLING HALF 1
34 31.10.0046 0 COUPLING - COMPLETE 1

INCLUDES ITEMS 28, 29 AND 33
35 20.1175.05.01 0 VIBRATOR GEARCASE GASKET 1
[Figure End]
P Y
C O
E R
S T
MA
Page 33
P Y
C O
E R
S T
MA
Page 34
NAME: HOPPER WITH EXTENSIONS OPTION ASM UPTO SERIAL NO. MACHINE: I-1310 CRUSHER
FJP580107
18
16
8
21
20
15
1
14
Y
5
O P
6
R C 7
TE
S
19
MA
10
2
17
13
9
12
3
4
11
Page 35
NAME: HOPPER WITH EXTENSIONS OPTION ASM UPTO SERIAL NO. MACHINE: I-1310 CRUSHER
FJP580107
1 10.28.0163 0 HYDRAULIC RAM 2

OPTION
OPTION
3 1310.08.05 0 HOPPER BACK FLAP 1
4 1310.08.04 0 HOPPER REAR EXTENSION 1

OPTION
5 26.24.00030 0 M30 NYLOC NUT 8
OPTION
OPTION
7 26.02.30150 0 M30X150 HINGE EYE BOLT 8
OPTION
8 1310.08.07 0 PIN 4
OPTION
9 1310.08.06 0 RAM GUARD 1
OPTION
10 380308100 0 380308100 PIN 2
11 380308110 0 380308110 PIN
P Y 2
O
OPTION
12 380308150 0 380308150 PIN 1
C
OPTION
R
13 380308160 0 380308160 PIN 1
E
OPTION
14 380308180 0 380308180 PIN 2
T
OPTION
S
15 380208150 0 380208150 PIN 2
A
OPTION
16 1310.08.08 0 VGF MOTOR GUARD 2
17
18 M
1310.08.03
1310.08.02
1
1
HOPPER LHS EXTENSION
OPTION
HOPPER RHS EXTENSION
OPTION
1
19 1310.08.01 3 HOPPER BASE 1
20 1175.08.05 2 WEDGE 1
OPTION
21 1175.08.48 0 CHAIN 1
OPTION
[Figure End]
Page 36
NAME: HOPPER WITH EXTENSIONS OPTION ASM FROM SERIAL NO. MACHINE: I-1310 CRUSHER
FJP580108
15
10
21
14
20
6
5
19
Y
17
O P 18
R C
E
16
S T
MA
1
8
4
9
7
11
13
3
12
Page 37
NAME: HOPPER WITH EXTENSIONS OPTION ASM FROM SERIAL NO. MACHINE: I-1310 CRUSHER
FJP580108
1 380308100 0 380308100 PIN 2
2 380308110 0 380308110 PIN 2

OPTION
3 380308150 0 380308150 PIN 1
OPTION
4 380308160 0 380308160 PIN 1
OPTION
5 380308180 0 380308180 PIN 2
OPTION
6 10.28.0163M 0 10.28.0163 RAM 2
OPTION
7 10.28.0720M 0 10.28.0720 RAM 1
OPTION
8 1160.08.04 1 HOPPER BASE 1
9 1160.08.05 2 HOPPER BACK FLAP 1
10 1310.08.02 2 HOPPER RHS EXTENSION 1
Y
OPTION
P
11 1310.08.03 2 HOPPER LHS EXTENSION 1
O
OPTION
12 1310.08.04 0 HOPPER REAR EXTENSION 1
C
OPTION
R
13 1310.08.06 1 RAM GUARD 1
E
OPTION
14 1310.08.07 0 PIN 4
T
OPTION
S
15 1310.08.08 0 VGF MOTOR GUARD 2
A
16 26.02.30150 0 M30X150 HINGE EYE BOLT 8
M
OPTION
17 26.24.00030 0 M30 NYLOC NUT 8
OPTION
OPTION
19 380208150 0 380208150 PIN 2
OPTION
20 1175.08.05 2 WEDGE 2
OPTION
21 1175.08.48 0 CHAIN 2
OPTION
[Figure End]
Page 38
NAME: POWERUNIT ASM UPTO SERIAL NO. FJP570050 MACHINE: I-1310 CRUSHER
12
25
9
37
30
38
24
29
17
43
16
10
41
42
8
44
28
Y
21
1
40
O 45
23
5
C
39
7
3
R
34
15
E
2
27
S T 20
33
A
14
31
32
M
13
4
36
6
18
26
19
22
11
35
Page 39
1 SEE_NOTE_4 0 SEE ELECTRICAL SECTION 1
2 10.42.0045 0 SOLENOID VALVE 1
3 10.19.5389 0 CABLE 1
4 1310.17.10 0 CATWALK HANDRAIL (POWERUNIT) 1
5 1310.17.07 1 CHEQUERED PLT FLOOR PANEL 1
6 10.19.5387 0 CONTROL VALVE 1
7 10.16.5317 0 CONTROL VALVE 1
8 14.65.0005 0 DESERT SPEC WARNING SIREN 2
9 12.86.3030 0 DOOR LATCH 2
10 12.11.0017 0 GAS STRUT 4
PY
11 1310.17G 0 I-1310RS CAT C9 C/W RAD PACK P/UNIT 1
O
12 12.10.0021 0 HINGE 4
C
13 1175.11.28 0 LADDER PLATE 4
14 1175.11.29
E R 0 LADDER RUNG BOLT ON 1
S T
15 1310.17.14 0 LADDER SUPPORT 1
A
16 14.85.1200 0 NODE CONTROL UNIT 1
M
17 10.35.0024 0 OIL COOLER 1
17 10.35.0047 0 THERMOSTAT FOR OIL COOLER 1
18 12.15.0610 0 CAP 2
19 1310.17.08 0 REAR CATWALK SUPPORT ASM 1
20 20.1175.11.01 0 RUBBER LADDER SIDE MEMBER 2
21 10.42.0046 0 SOLENIOD VALVE 1
23 10.16.5314 0 CONTROL VALVE 1
24 1310.12A 1 HYDRAULIC TANK 1

25 1310.17.03 1 MAIN ACCESS DOOR 1
26 1175.17.20 1 SIDE HANDRAIL 1
27 12.11.0013 1 SPRING 1
28 663.03.32 3 BEACON MNT 1
Page 40
30 1310.17.06 2 SERVICE ACCESS DOOR 1
31 1175.11.16 3 FRONT FIXED LADDER 1
32 1175.17.22 3 GATE 1
33 1175.17.21 3 HANDRAIL / GATE FIXING 1
34 1310.17.01 3 POWERUNIT CRADLE 1
35 1175.17I 4 CONTROL BOX 1

36 1175.11.17 4 FOLD UP LADDER 1
37 12.86.5096 0 STRAP 2
38 1175.17.133 1 HANDLE 2
39 10.16.5353 0 NIMCO HANDLE BRACKET 3
40 10.19.5384 0 HANDLE 2
PY
42 1310.17.25 1 REMOTE LEVER VALVE MNT - 3 BANK 1
O
43 26.44.08040 0 BOLT 2
C
44 1312.17.97 0 REMOTE CABLE END ADAPTOR 1
R
TE
S
[Figure End]
MA
Page 41
P Y
C O
E R
S T
MA
Page 42
NAME: ENGINE COMPARTMENT UPTO SERIAL NO. FJP570050 MACHINE: I-1310 CRUSHER
18
27
26
28
3
2
14
1
23
16
21
25
Y
33
32
P
6
O
12
C
36
13
R
4
E
15
S T 10
29
A
9
17
M
34
19
22
24
5
31
35
30
20
Page 43
1 10.26.0026 0 28MM DOUBLE BODY 1
2 10.26.0055 0 44.5MM DIA PROFILED CLAMP & COVER PLT 1
3 1175.17.78 0 AIR FILTER SUPPORT 1
4 14.77.0500 0 BATTERY ISOLATOR SWITCH 1
5 1175.17.114 0 CAT C9 RADIATOR ROOF 1
6 12.86.3032 0 CATCH PLATE 2
7 1175.17.120 0 COOLPACK LOUVRE PANEL 1
8 1175.17.122 0 ENCLOSURE REAR PANEL CLOSER 1
9 12.11.0031 0 GAS STRUT 2
10 12.86.3031 0 HEAVY DUTY ADJUSTABLE FASTNER 2
PY
11 12.10.0021 0 HINGE 4
O
12 12.86.5061 0 PULL HANDLE END SUPPORT 4
C
13 12.86.5060 0 PULL HANDLE TUBE 2
14 1312.17.13
E R 0 PULL HANDLE WASHER 4
S T
15 12.10.0028 0 HINGE 3
A
16 1312.17.65 1 SAFETY MECHANISM LOCKING ARM 1
M
17 1312.17.62 0 SHIM 1
18 1175.17.83 0 SILENCER HEAT SHIELD 1
19 12.86.3029 0 VISE ACTION COMPRESSION LATCH 1
20 1175.17.113 1 RADIATOR ROOF SUPPORT 2
21 1175.17.84 1 FOOTSTAND 1
22 1312.17.43 1 LHS SIDE PANEL 2
23 1312.17.12 1 POWERUNIT ROOF 1
24 1312.17.08 1 RHS RADIATOR CORNER PANEL 1
25 1312.17.52 1 SANDWICH PLATE FOR CATCH 2
26 1175.17.79 1 SILENCER SUPPORT PLT 2
27 1175.17.82 1 SILENCER SUPPORT STRAP 2
28 1175.17.75 2 ENCLOSURE REAR PANEL RHS 1
29 1312.17.63 2 FILLER CAP ACCESS DOOR 1
Page 44
31 1312.17.03 3 RADIATOR MOUNTING 2
32 1175.17.76 4 ENCLOSURE REAR PANEL LHS 1
33 1312.17.59 4 GAS STRUT FIXING 1
35 1312.17.06 5 RADIATOR ROOF SUPPORT MEMBER 1
36 1312.17.01 6 POWERUNIT FRAME MWA 1
[Figure End]
P Y
C O
E R
S T
MA
Page 45
P Y
C O
E R
S T
MA
Page 46
NAME: ENGINE ASM UPTO SERIAL NO. FJP570050 MACHINE: I-1310 CRUSHER
ILLUSTRATION: M1310_17G_ENGINE
23
22
30
21
5
33
39
26
40
7
29
25
16
20
28
4
Y
2
P
24
8
O
1
43
C
13
38
R
42
E 31
19
T
3
S
14
A 35
17
M
34
15
18
41
9
11
36
27
10
32
12
46
37
45
Page 47
1 12.17.0118 0 MIKALOR CLAMP 3
3 14.71.0014 0 24V STARTER RELAY 1
4 1175.17.89 0 4" STAINLESS STRAIGHT CONNECTION 1
5 12.17.2085 0 RAIN CAP 1
6 12.17.0043 0 5" S/S BELLOW C/W CUFFED ENDS 1
7 10.24.XXXX 0 PUMP - MACHINE SERIAL NO. REQUIRED TO ORDER 1
8 1175.17.123 0 AIR INTAKE PIPE (C9 C/W RAD) 1
9 15.02.0056 0 AIR RESTRICTION INDICATOR 1
10 12.14.3007 0 BATTERY 12V 2
PY
11 20.1312.17.01 0 BATTERY BOX RUBBER 2
O
12 1312.17.38 0 BATTERY SECURING STRAP 2
C
13 15.35.0124 0 COUPLING FLANGE 1
14 15.02.0074
E R 0 C9 AIR FILTER 1
S T
15 15.04.3057 0 CAT C9 ACERT C/W INTEG RAD PACK 350HP 1
A
15 19690272 0 WATER LEVEL SWITCH 1
M
NOT SHOWN
16 12.63.0110 0 COBRAHEAD AIR INLET 1
17 15.02.0079 0 DUST EJECTOR PRECLEANER 1
18 1175.17.100 0 DUST PREVENTION GUARD 1
19 14.86.0012 0 100A INLINE FUSE - REPLACED PART NO. 14.71.0015 2
20 1175.17.103 0 EXHAUST SECTION (MANIFOLD END) 1
21 1175.17.104 0 EXHAUST SECTION (SILENCER END) 1
22 12.17.3916 0 EXHAUST SILENCER BOX 1
23 1175.17.112 0 EXHAUST TAIL PIECE 1
24 15.35.0122 0 COUPLING HUB 1
25 12.70.0410 0 FILTER FOR THE HYDROSTATIC PUMP 1
26 15.04.3315 0 MOORMAN CLAMP (EXHAUST TO TURBO) 1
28 1310.17.13 0 PUMP MOUNTING PLATE 1
Page 48
29 15.31.0099 0 RUBBER LINED CLAMP (95-103MM) 1
30 1175.17.98 0 SCAVENGE HOSE ADAPTOR 1
31 1175.17.105 0 STARTER RELAY AND FUSE BOX MTG PLT 1
32 15.02.0770 0 WATERTRAP COMPLETE C9 ACERT 1
33 15.04.3316 0 WELD ON COUPLING 1
34 1175.17.115 1 C9 ACERT C/W RAD ENGINE CRADLE 1
35 12.09.1054 1 ENGINE MOUNTING 6
36 15.02.0771 0 WATERTRAP ELEMENT 1
37 15.02.0120 0 DIESEL FILTER C9 1
38 15.04.3304 0 OIL FILTER 1

DIRECT REPLACEMENT FOR PREVIOUS OIL FILTER PART NO. 15.02.0032
39 15.02.0072 0 AIR FILTER OUTER C9 1
PY
40 15.02.0070 0 AIR FILTER INNER 1
O
41 10.03.1100 0 1/8 M/F BULKHEAD ADAPTER 1
C
42 117510.05 0 RESTRICTION IND. TO AIR CLEANER PIPE 1
R
45 05050221 0 2" EXHAUST CLAMP U-BOLT STYLE 2
46 1175.17.141 0
TE HEAT SHIELD 1
[Figure End]
A S
M
Page 49
P Y
C O
E R
S T
MA
Page 50
NAME: POWERUNIT ASM FROM SERIAL NO. FJP570051 UPTO MACHINE: I-1310 CRUSHER
FJP570095
14
31
10
29
50
51
52
53
30
32
15
13
19
4
Y
11
45
40
P
23
O
9
35
46
C
38
25
R
1
49
E
47
T 48
12
S
8
5
18
A
3
33
M
24
43
17
37
20
16
42
27
44
21
22
41
36
6
26
34
39
28
Page 51
FJP570095
4 12.86.3032 0 CATCH PLATE 2
6 1312.23.28 0 CHUTE SEAL CLAMP BACK 2
10 12.86.3030 0 DOOR LATCH 1
11 12.11.0014 0 GAS STRUT
P Y 2
O
12 1310.17.28 0 HANDLE COVER PLT 1
13 12.86.3031
R C 0 HEAVY DUTY ADJUSTABLE FASTNER 2
E
14 12.10.0021 0 HINGE 6
15 14.85.1201
S T 0 JMG NODE LARGE CONTROL UNIT 1
A
16 1175.11.28 0 LADDER PLATE 4
17
18 M
1175.11.29
1310.17.14
0
0
LADDER RUNG BOLT ON
LADDER SUPPORT
1
19 10.35.0024 0 OIL COOLER 1
20 1310.17.19 0 PIPE GRD MTG 2
21 12.15.0610 0 CAP 2
22 20.1310.17.01 0 PUNIT SEALING RUBBER 2
26 1310.17I 1 CAT C9 C/W RAD PACK P/UNIT 1

28 1310.17L 1 CONTROL BOX - I-1310 1

29 1310.17.22 1 DOOR MWA STANDARD 1
Page 52
FJP570095

33 1310.17.21 1 POWERUNIT MWA 1
36 1175.17.20 1 SIDE HANDRAIL 1
37 12.11.0013 1 SPRING 1
38 663.03.32 3 BEACON MNT 1
40 1310.17.27 2 POWERUNIT HOSE COVER 1
41 1175.11.16 3 FRONT FIXED LADDER
P Y 1
O
42 1175.17.22 3 GATE 1
43 1175.17.21 3
R C
HANDRAIL / GATE FIXING 1
E
44 1175.11.17 4 FOLD UP LADDER 1
45 26.44.08040
S T
0 BOLT 2
A
47
48
1312.17.98
10.16.5353 M 0
0
REMOTE CABLE END ADAPTOR
NIMCO HANDLE BRACKET

1
49 10.19.5384 0 HANDLE 2
50 12.86.5096 0 STRAP 2
51 1175.17.133 1 HANDLE 2
[Figure End]
Page 53
P Y
C O
E R
S T
MA
Page 54
14
31
10
52
50
51
29
13
4
30
32
54
2
15
Y
45
19
40
P
11
23
O
35
53
9
C 46
12
38
R
25
E
1
56
47
T
49
S
3
8
5
48
A
18
33
M
24
43
17
37
20
16
42
27
55
44
21
41
39
22
36
34
6
26
62
60
28
59
57
63
61
58
Page 55
4 12.86.3032 0 CATCH PLATE 2
10 12.86.3030 0 DOOR LATCH 1
11 12.11.0014 0 GAS STRUT
P Y 2
O
13 12.86.3031
R C 0 HEAVY DUTY ADJUSTABLE FASTNER 2
E
14 12.10.0021 0 HINGE 6
15 14.85.1201
S T 0 JMG NODE LARGE CONTROL UNIT 1
A
16 1175.11.28 0 LADDER PLATE 4
17
18 M
1175.11.29
1310.17.14
0
0
LADDER RUNG BOLT ON
LADDER SUPPORT
1
19 10.35.0025 0 OIL COOLER 1
20 1310.17.19 0 PIPE GRD MTG 2
21 12.15.0610 0 CAP 2
22 20.1310.17.01 0 PUNIT SEALING RUBBER 2
26 1310.17I 2 CAT C9 C/W RAD PACK P/UNIT 1

28 1310.17L 2 CONTROL BOX - I-1310 1

29 1310.17.40 0 OIL COOLER 1
Page 56

33 1310.17.21 4 POWERUNIT MWA 1
36 1175.17.20 1 SIDE HANDRAIL 1
37 12.11.0013 1 SPRING 1
38 663.03.32 3 BEACON MNT 1
41 1175.11.16 3 FRONT FIXED LADDER 1
42 1175.17.22 3 GATE
P Y 1
O
44 1175.11.17 4
R C
FOLD UP LADDER 1
E
45 26.44.08040 0 BOLT 2
46 1312.17.97
S T
0 REMOTE CABLE END ADAPTOR 1
A
48
49
10.16.5353
10.19.5384 M 0
0
NIMCO HANDLE BRACKET
HANDLE
3
50 12.86.5096 0 STRAP 2
51 1175.17.133 1 HANDLE 2
52 1310.17.41 0 VENT 1
53 1310.17.44 0 OIL COOLER MTG BRACKET 1
54 1310.17.43 0 P. UNIT 2
55 1310.10.45 0 PIPE GRD LHS 1
56 1310.10.44 0 PIPE GRD RHS 1
57 1160.17.54 0 LIGHT POLE UPPER SECTION 1

OPTION FROM SERIAL NO. FJP580132 ECO5742
58 1160.17.55 0 LIGHT POLE LOWER SECTION 1
59 12.70.0116 0 24V HALOGEN FLOODLIGHT 4
60 26.24.00016 0 NYLOC NUT 2
Page 57

[Figure End]
P Y
C O
E R
S T
MA
Page 58
NAME: ENGINE COMPARTMENT FROM SERIAL NO. FJP570051 UPTO MACHINE: I-1310 CRUSHER
18
28
27
30
14
1
24
22
16
26
36
34
4
Y
12
O P
9
R C
13
35
E
39
T
25
10
S
31
A
2
38
M
11
23
19
17
5
33
37
32
20
15
7
Page 59
4 12.86.3032 0 CATCH PLATE 2

9 12.11.0031 0 GAS STRUT 2
11 12.10.0021 0 HINGE
P Y 4
O
13 12.86.5060
R C 0 PULL HANDLE TUBE 2
E
14 1312.17.13 0 PULL HANDLE WASHER 4
15 1175.17.87
S T 0 REMOTE STOP BRACKET 1
A
17
18 M
1312.17.62
1175.17.83
0
0
SHIM
SILENCER HEAT SHIELD

1
19 12.86.3029 0 VISE ACTION COMPRESSION LATCH 1
22 1310.17.45 0 FOOTSTAND 1
23 1312.17.43 1 LHS SIDE PANEL 2
Page 60
39 12.10.0028 0 HINGE 3
[Figure End]
P Y
C O
E R
S T
MA
Page 61
P Y
C O
E R
S T
MA
Page 62
NAME: ENGINE ASM FROM SERIAL NO. FJP570051 UPTO FJP580134 MACHINE: I-1310 CRUSHER
INCLUDING FJP580138
ILLUSTRATION: M1310_17I_ENGINE
23
22
30
21
5
33
39
26
40
7
29
25
16
20
28
4
P
2
24
O
8
C
43
13
R
38
E
42
31
T
19
S
3
14
MA 35
17
34
15
18
41
44
9
11
36
27
10
46
32
45
12
37
Page 63
INCLUDING FJP580138
3 14.71.0014 0 24V STARTER RELAY 1
4 1175.17.89 0 4" STAINLESS STRAIGHT CONNECTION 1
5 12.17.2085 0 RAIN CAP 1
6 12.17.0045 0 BELLOW 2
CLAMPS FOR BELLOW USE PART NO. 12.17.0125
6 12.17.0125 0 125MM-135MM BAND CLAMP 2
10 12.14.3007 0 BATTERY 12V
P Y 2
O
12 1312.17.38
R C 0 BATTERY SECURING STRAP 2
E
14 15.02.0074
S T 0 C9 AIR FILTER 1
A
15
16
19690272
M
12.63.0110
0
0
WATER LEVEL SWITCH
NOT SHOWN
COBRAHEAD AIR INLET
1
19 14.86.0012 0 100A INLINE FUSE - REPLACED PART NO. 14.71.0015 2
24 15.35.0122 1 COUPLING HUB 1
Page 64
INCLUDING FJP580138
_ _
30 1175.17.98 0 SCAVENGE HOSE ADAPTOR 1
31 1175.17.105 1 STARTER RELAY AND FUSE BOX MTG PLT 1
34 1175.17.115 2 C9 ACERT C/W RAD ENGINE CRADLE 1
36 15.02.0771 0 WATERTRAP ELEMENT 1
37 15.02.0120 0 DIESEL FILTER C9 1
38 15.04.3304 0 OIL FILTER 1
Y
DIRECT REPLACEMENT FOR PREVIOUS OIL FILTER PART NO. 15.02.0032
P
O
40 15.02.0070 0 AIR FILTER INNER 1
41 10.03.1100 0
R C
1/8 M/F BULKHEAD ADAPTER 1
E
44 26.26.10254
S T
0 10" EYE BOLT 4
A
46 1175.17.141
[Figure End]
M 0 HEAT SHIELD 1
Page 65
P Y
C O
E R
S T
MA
Page 66
NAME: POWERUNIT ASM FROM SERIAL NO. FJP580135 EXCLUDING MACHINE: I-1310 CRUSHER
FJP580138
19
38
23
70
71
40
39
24
21
25
49
43
53
6
7
46
41
69
Y
48
68
P
27
36
67
O
9
54
37
C
8
66
34
55
R
1
65
E
26
64
11
63
T
4
2
S
31
A
35
M
17
20
12
13
51
15
14
32
18
3
28
22
52
30
33
29
47
44
16
61
62
45
57
56
58
60
59
Page 67
FJP580138
1 10.16.5700 0 FLOW REGULATOR 1
2 10.16.5702 0 PRESSURE RELIEF VALVE 1
6 10.35.0024 0 OIL COOLER 1
7 10.35.0025 0 OIL COOLER 1
11 1160.17.46 0 SPLITTER MNT PLT 1
12 1175.11.16 3 FRONT FIXED LADDER
P Y 1
O
13 1175.11.17 4 FOLD UP LADDER 1
14 1175.11.28
R C 0 LADDER PLATE 4
E
15 1175.11.29 0 LADDER RUNG BOLT ON 1
16 1175.17.20
S T 1 SIDE HANDRAIL 1
A
18
19 M
1175.17.22
12.10.0021
3
0
GATE
HINGE
1
20 12.11.0013 1 SPRING 1
21 12.11.0014 0 GAS STRUT 2
22 12.15.0610 0 CAP 2
23 12.86.3030 0 DOOR LATCH 1
25 12.86.3032 1 CATCH PLATE 2
26 1310.10.44 0 PIPE GRD RHS 1

31 1310.17.14 0 LADDER SUPPORT 1
Page 68
FJP580138
32 1310.17.19 0 PIPE GRD MTG 2
33 1310.17.21 14 POWERUNIT MWA 1
39 1310.17.40 2 OIL COOLER 1
40 1310.17.41 0 VENT 1
41 1310.17.44 4 OIL COOLER MTG BRACKET 1
43 1310.17.60 0 OIL COOLER FIXING BRACKET 1
44 1310.17L 2 CONTROL BOX - I-1310
P Y 1
O
45 1310.17T 2 CAT C9 C/W RAD PACK P/UNIT 1
C
R
46 1310.29.01 2 P-UNIT L-MANIFOLD 1
E
48 14.65.0005
S T
0 DESERT SPEC WARNING SIREN 2
A
49 14.85.1201 0 JMG NODE LARGE CONTROL UNIT 1
51
52
20.1175.11.01
20.1310.17.01 M 0
0
RUBBER LADDER SIDE MEMBER
PUNIT SEALING RUBBER

2
53 20.1310.17.02 0 RUBBER ISOLATOR 4
54 663.03.32 3 BEACON MNT 1
56 12.70.0116 0 24V HALOGEN FLOODLIGHT 4

OPTION
57 1160.17.54 0 LIGHT POLE UPPER SECTION 1
OPTION
OPTION
OPTION
60 1160.17.55 0 LIGHT POLE LOWER SECTION 1
OPTION
OPTION
62 26.24.00016 0 NYLOC NUT 2
OPTION
63 10.19.5384 0 HANDLE 2
Page 69
FJP580138
69 26.44.08040 0 BOLT 2
70 12.86.5096 0 STRAP 1
71 1175.17.133 1 HANDLE 1
[Figure End]
P Y
C O
E R
S T
MA
Page 70
NAME: ENGINE COMPARTMENT FROM SERIAL NO. FJP580135 MACHINE: I-1310 CRUSHER
EXCLUDING FJP580138
10
9
27
8
6
26
7
4
29
34
20
17
P
30
O
5
19
R C
14
21
16
18
TE
25
28
S
13
36
33
MA
31
15
12
32
2
3
1
22
23
11
35
24
Page 71
EXCLUDING FJP580138
11 1175.17.87 0 REMOTE STOP BRACKET
P Y 1
O
12 12.10.0021 0 HINGE 4
13 12.10.0028
R C 0 HINGE 3
E
14 12.11.0031 0 GAS STRUT 2
15 12.86.3029
S T 0 VISE ACTION COMPRESSION LATCH 1
A
17
18 M
12.86.3032
12.86.5060
1
0
CATCH PLATE
PULL HANDLE TUBE

2
20 1310.17.45 2 FOOTSTAND 1
27 1312.17.13 0 PULL HANDLE WASHER 4
28 1312.17.43 1 LHS SIDE PANEL 2
Page 72
EXCLUDING FJP580138
32 1312.17.62 0 SHIM 1

[Figure End]
P Y
C O
E R
S T
MA
Page 73
P Y
C O
E R
S T
MA
Page 74
NAME: ENGINE ASM FROM SERIAL NO. FJP580135 EXCLUDING MACHINE: I-1310 CRUSHER
FJP580138
ILLUSTRATION: M1310_17T_ENGINE_REV3
26
13
27
16
19
17
36
35
11
23
10
48
37
24
25
49
Y
28
7
P
18
8
C
15
R
38
12
E
1
T
46
39
5
S
42
A
31
2
M
47
20
32
45
53
44
52
6
30
50
9
41
33
34
14
29
22
51
21
4
Page 75
FJP580138
1 117510.02 1 SCAVENGE HOSE 1
3 117510.12 0 RADIATOR DRAIN PIPE 1
4 117510.13 0 ENGINE OIL SUMP DRAIN PIPE 1
8 10.24.3671 0 DANFOSS 90R180 PUMP-C8 1
12 1175.17.105 1
P Y
STARTER RELAY AND FUSE BOX MTG PLT 1
O
14 1175.17.115
R C 3 C9 ACERT ENGINE CRADLE 1
E
16 1175.17.82
S T 1 SILENCER SUPPORT STRAP 2
A
18
19 M
1175.17.89
1175.17.98
0
0
4" STAINLESS STRAIGHT CONNECTION
SCAVENGE HOSE ADAPTOR

1
21 15.02.0120 0 DIESEL FILTER C9 1
22 12.14.3007 0 BATTERY 12V 2
23 12.17.0045 0 BELLOW 1
CLAMPS FOR BELLOW USE PART NO. 12.17.0125
23 12.17.0125 0 125MM-135MM BAND CLAMP 2
24 12.17.0118 0 MIKALOR CLAMP 3
25 12.17.0170 0 MIKALOR CLAMP 1
26 12.17.2085 0 RAIN CAP 1
28 12.63.0110 0 COBRAHEAD AIR INLET 1
29 1312.17.38 0 BATTERY SECURING STRAP 2
Page 76
FJP580138
31 15.02.0074 0 C9 AIR FILTER 1
34 19690272 0 WATER LEVEL SWITCH 1

NOT SHOWN
39 15.35.0142 0 COUPLING FLANGE & HUB COMPLETE 1
42 14.86.0012 0
P Y
100A INLINE FUSE - REPLACED PART NO. 14.71.0015 2
O
44 26.24.00012 0 NYLOC NUT 1
45 32.02.01012 0
R C
M12 FORM C FLAT WASHER ZC BS 4320 1
E
46 14.71.0014 0 24V STARTER RELAY 1
47 15.04.3304
S
0
T OIL FILTER 1
A
49
50
15.02.0070
15.02.0771 M 0
0
AIR FILTER INNER
WATERTRAP ELEMENT
1
53 1175.17.141 0 HEAT SHIELD 1
[Figure End]
Page 77
P Y
C O
E R
S T
MA
Page 78
NAME: CONTROL BOX ASM MACHINE: I-1310 CRUSHER
5
1
Y
2
O P
R C
TE
A S 4
7
M 9
3
6
Page 79
NAME: CONTROL BOX ASM MACHINE: I-1310 CRUSHER
1 1175.17.45 0 'BELT-WAY' PANEL ASM 1
2 1175.17.138 0 ALUMINIUM HINGE 1

MACHINES UPTO SERIAL NO. FJP570065 ALSO PURCHASE ITEMS 4, 5 & 7
ECO4508
3 12.86.3030 0 DOOR LATCH 1
4 12.11.0032 0 GAS STRUT 1

ECO4508
5 12.11.0036 0 GAS STRUT 1

ECO4508
6 12.86.5080 0 PULL HANDLE 1
7 1175.17.137 1 CONTROL BOX DOOR 1

ECO4508
PY
8 1175.17.40 6 CONTROL BOX MWA 1
O
9 12.87.0683 0 DOCUMENT HOLDER 1
[Figure End]
R C
TE
A S
M
Page 80
NAME: HYDRAULIC TANK ASM MACHINE: I-1310 CRUSHER
17
12
7
9
14
13
P Y
O
RC
10
E
20
T
5
A S 11
2
M 19
15
16
4 18
3 21
22 26
(I-1310 UPTO SERIAL NO. FJP570095) 23 25
(I-1310RS UPTO SERIAL NO. FJS570014)
(C-1540 UPTO SERIAL NO. FCC570035 24
EXCLUDING FCC570027)
Page 81
NAME: HYDRAULIC TANK ASM MACHINE: I-1310 CRUSHER
1 10.12.0026 0 1/2" BONDED SEAL 1

2 10.01.1114 0 1/2" X 1/2" M/M ADAPTOR DIN 3852-A 2
3 10.02.1217 0 1/2X1/2 M/F SWIVEL 90 SWEPT 1
4 10.16.0048 0 BALL VALVE 1
5 10.21.3414 0 DESICCANT AIR BREATHER 1
6 10.08.0014 0 FEMALE BLANKING CAP 1

7 10.22.5020 0 FILLER CAP 1
8 12.10.0021 0 HINGE 2
9 12.86.5080 0 PULL HANDLE 2
10 10.21.3405 0 RETURN FILTER 2
PY
11 10.21.5102 0 SUCTION FILTER 5
O
12 10.23.6652 0 FLOAT LEVEL SWITCH - ORDER PART NO. 10.23.6653 1
C
12 10.23.6653 0 FLOAT LEVEL SWITCH 1
13 20.683.12.01
E R 1 SEAL 1
S T
14 1310.12.01 1 HYDRAULIC TANK LID 1
A
15 20.1175.12.01 1 HYDRUALIC TANK RUBBER MOUNTING 2
M
16 20.1175.12.02 1 RUBBER DISC 8
17 1175.12.03 4 HYDRAULIC TANK COVER 1
18 1175.12.01 5 HYDRAULIC TANK MWA 1
19 10.23.5008 0 FLUID LEVEL/TEMP. GAUGE 1
20 10.21.3406 0 RETURN FILTER ELEMENT 2
21 10.09.0022 0 1" MALE BLANKING P[LUG 1

22 10.16.0050 0 1" LOW PRESSURE BALL VALVE 1
23 10.12.0028 0 1" BONDED SEAL 3
24 10.01.1222 0 1"M X 1"F ADAPTER 1
25 10.02.1222 0 1X1 M/F SWIVEL 90 SWEPT 1
26 10.03.1124 0 BULKHEAD ADAPTER 1
[Figure End]
Page 82
NAME: FUEL TANK ASM MACHINE: I-1310 CRUSHER
3
5
P Y
C O
E R
S T
MA
7
Page 83
NAME: FUEL TANK ASM MACHINE: I-1310 CRUSHER
1 20.1310.13.01 0 DIESEL TANK RUBBER MOUNT 2
2 20.1310.13.02 0 DIESEL TANK RUBBER MOUNT 4
3 1310.13.02 0 DIESEL TANK SUPPORT FRAME 1
4 10.23.5004 0 FUEL LEVEL GUAGE (LONG) 2
5 1310.13.03 0 RUBBER MOUNT CLAMP ASM 4
6 10.09.0014 0 ½" MALE BLANKING PLUG 1
7 1310.13.01 2 DIESEL TANK 1
8 10.22.6750 0 FILLER CAP 1
[Figure End]
P Y
C O
E R
S T
MA
Page 84
NAME: IMPACTOR ASM UPTO SERIAL NO. FJP580134 INCLUDING MACHINE: I-1310 CRUSHER
FJP580138
56
55
54
52
59
60
53
58
46
57
51
23
50
7
49
48
13
47
28
4
2
27
32
1
Y
17
34
P
14
18
O
61
C
62
E R
16
T
33
15
A S
45
M
6
44
30
12
29
8
35
20
9
43
22
37
11
19
10
26
25
31
42
41
38
21
39
36
40
24
Page 85
FJP580138
1 12.15.0400 0 1 1/4" END CAP 1
2 12.08.0025 0 1 1/4" U BOLT 2
3 12.07.0020 0 1 1/4" X 3/4" SOCKET 1
4 10.02.2233 0 1-1/4" M/F ELBOW 1
6 10.28.0721M 0 1310 CHMBR OPEN RAM 2
7 31.10.0749 0 3/4" BSTP X 3/4" TAIL 1
8 13.01.1735 0 BELT 2
9 20.1310.10.03 0 CHAMBER OPENING RUBBER SEAL 1
10 1310.10.17 0 CHAMBER REAR CLOSER PLATE 1
11 1310.10.31 0 CHAMBER RUBBER CLAMP 3
12 1310.10.03 0 CLAMP ASM
P Y 2
O
13 12.05.0610 0 SPRAY NOZZLE 3
14 1310.10.41
R C 0 DISCHARGE GUARDING LHS 1
E
15 1310.10.40 0 DISCHARGE GUARDING RHS 1
16 1310.10.42
S T 0 DISCHARGE GUARDING SIDE PLT 1
A
17 1310.10.43 0 DISCHARGE GUARDING SIDE PLT 1
18
19 M
20.1310.10.05
20.1310.10.04
0
0
FEEDER DISCHARGE SEALING RUBBER
FEEDER REAR SEALING RUBBER

2
20 1310.10.27 0 GUARD MTG PLATE 1
21 12.10.0021 0 HINGE 4
22 20.1310.10.02 0 INTERFACE RUBBER 2
23 1310.10.13 0 PIN 1
24 12.86.5070 0 PULL HANDLE 2
25 13.02.6035 0 PULLEY 1
26 1310.10.29 0 SIDE PLATE 2
27 1312.48.01 0 SPRAYBAR 1
28 20.1312.23.13 0 SPRAYBAR SEALING RUBBER 2
29 380308110 0 380308110 PIN 2
30 380308150 0 380308150 PIN 2
31 13.04.8883 0 5050X125 TAPERLOCK BUSH 1
Page 86
FJP580138
32 1310.10.56 0 CRUSHER DRIVE MOUNTING 1
33 1310.10.35 1 1310 IMPACT CHAMBER 1
34 1310.10.14 1 CHAMBER FRONT CLOSER PLATE 1
35 1310.10.30 1 CLAMP ASM 1
36 1310.10.55 0 DRIVE SIDE GUARD CENTRE PLATE 1

37 1310.10.01 1 HOPPER RHS DEFLECTOR PLT 1
38 1310.10.25 1 INSPECTION HOLE COVER 1
39 1310.10.21 2 CRUSHER DRIVE SIDE GUARD TOP 1

40 1310.10.53 0 DRIVE SIDE GUARD FRONT COVER REAR 1
Y
P
O
41 1310.10.23 2 DRIVE SIDE GUARD FRONT COVER RHS 1
C
R
E
42 1310.10.51 0 FIXED DRIVE SIDE GUARD 1
T
S
A
43 1310.10.26 2 GUARD MNT 1
44
45
1310.10.02
1310.10.05 M 2
2
HOPPER LHS DEFLECTOR PLT
IMPACTOR SPACER - RECYCLING

1
46 1310.10G 1 MOTOR DRIVE ASM - CENTAFLEX COUPLING - EATON 1

47 38.50.08050 0 DIA8X50 ROLL PIN 1
48 1312.10.24 0 COLLAR 1
49 1175.10.17 1 SLEEVE 1
50 1312.10.23 0 ADJUSTER BAR 1
51 1175.10.16 0 WASHER 1
52 1312.10.25 0 ADJUSTER PLATE 1
53 1312.10.22 1 ADJUSTER PIVOT PLATE 1
54 20.1175.10.01 0 RUBBER CUSHION 2
55 26.24.00030 0 M30 NYLOC NUT 2
56 38.50.08040 0 ROLL PIN 1
57 26.24.00030 0 M30 NYLOC NUT 1
Page 87
FJP580138
59 26.44.30130 0 BOLT 1
60 1175.10.14 1 BOSS 1
61 1310.10.46 0 SPANNER 1
62 12.99.0380 0 I-1310(RS) GANTRY C/W HOIST & CHAINS 1

OPTION
[Figure End]
P Y
C O
E R
S T
MA
Page 88
NAME: IMPACTOR ASM FROM SERIAL NO. FJP580135 EXCLUDING MACHINE: I-1310 CRUSHER
FJP580138
38
18
55
44
42
51
8
39
50
31
56
58
29
57
40
41
37
52
59
49
5
28
54
43
30
60
61
Y
53
62
47
4
O P 19
C
27
E R
16
T
17
S
3
A
15
M
2
11
1
25
23
22
48
32
14
45
26
46
20
24
12
13
21
33
35
9
36
34
10
Page 89
FJP580138
1 380308110 0 380308110 PIN 2
2 380308150 0 380308150 PIN 2
3 10.28.0721 0 RAM 2
4 10.28.0722 0 RAM 2
5 31.10.0749 0 3/4" BSTP X 3/4" TAIL 1
6 1175.10.14 1 BOSS 1
7 1175.10.16 0 WASHER 2
8 1175.10.17 1 SLEEVE 1
9 12.10.0021 0 HINGE 4
10 12.86.5070 0 PULL HANDLE 2
11 13.01.1735 0 BELT
P Y 2
O
12 13.02.6035 0 PULLEY 1
13 13.04.8883
R C 0 5050X125 TAPERLOCK BUSH 1
E
14 1310.10.01 3 HOPPER RHS DEFLECTOR PLT 1
15 1310.10.02
S T 4 HOPPER LHS DEFLECTOR PLT 1
A
16 1310.10.03 0 CLAMP ASM 2
17
18 M
1310.10.05
1310.10.13
3
0
IMPACTOR SPACER - RECYCLING
PIN
2
19 1310.10.14 1 CHAMBER FRONT CLOSER PLATE 1
20 1310.10.17 0 CHAMBER REAR CLOSER PLATE 1
21 1310.10.25 1 INSPECTION HOLE COVER 1
22 1310.10.26 2 GUARD MNT 1
23 1310.10.27 0 GUARD MTG PLATE 1
24 1310.10.29 0 SIDE PLATE 2
25 1310.10.30 1 CLAMP ASM 1
26 1310.10.31 1 CHAMBER RUBBER CLAMP 3
27 1310.10.35 1 1310 IMPACT CHAMBER 1
28 1310.10.40 0 DISCHARGE GUARDING RHS 1
29 1310.10.41 0 DISCHARGE GUARDING LHS 1
Page 90
FJP580138
37 1310.10.56 0 CRUSHER DRIVE MOUNTING 1
38 1310.10I 0 MOTOR DRIVE ASM - CENTAFLEX COUPLING - SAUER 1

DANFOSS
39 1312.10.22 1 ADJUSTER PIVOT PLATE 1
40 1312.10.23 0 ADJUSTER BAR 1
P Y
41 1312.10.24 0 COLLAR 1
O
42 1312.10.25 0 ADJUSTER PLATE 1
RC
43 1312.48.01 0 SPRAYBAR 1
E
44 20.1175.10.01 0 RUBBER CUSHION 2
45 20.1310.10.02
S
0
T INTERFACE RUBBER 2
A
46 20.1310.10.04 0 FEEDER REAR SEALING RUBBER 1
M
47 20.1310.10.05 0 FEEDER DISCHARGE SEALING RUBBER 2
48 20.1310.10.08 0 CHAMBER OPENING RUBBER SEAL 1
49 20.1312.23.13 0 SPRAYBAR SEALING RUBBER 3
50 38.50.08040 0 ROLL PIN 1
51 38.50.08050 0 DIA8X50 ROLL PIN 1
52 12.07.0020 0 1 1/4" X 3/4" SOCKET 1
53 12.15.0400 0 1 1/4" END CAP 1
54 10.02.2233 0 1-1/4" M/F ELBOW 1
55 26.44.00030 0 NUT 1
58 26.44.30130 0 BOLT 1
59 12.05.0610 0 SPRAY NOZZLE 3
60 12.08.0025 0 1 1/4" U BOLT 2
61 1310.10.46 2 SPANNER 1
Page 91
FJP580138
62 12.99.0380 0 I-1310(RS) GANTRY C/W HOIST & CHAINS 1

OPTION
[Figure End]
P Y
C O
E R
S T
MA
Page 92
NAME: ROTOR ASM MACHINE: I-1310 CRUSHER
P Y
CO
E R
S T
MA
Page 93
NAME: ROTOR ASM MACHINE: I-1310 CRUSHER
1 12.99.0154 0 SHAFT 1
2 12.99.0156 0 CLAMPING SLEEVE 1
3 12.99.0158 0 BEARING COMPLETE FIXED 1

INCORRECTLY PART NUMBERED, PLEASE ORDER ITEM 3, PART NO.
12.99.0159
3 12.99.0159 0 BEARING COMPLETE - FIXED 1
3 12.99.0167 0 BEARING HOUSING 1
4 12.99.0167 0 BEARING HOUSING 1
4 12.99.0160 0 BEARING COMPLETE LOOSE 1
5 12.99.0162 0 ROLLER BEARING 1
6 12.99.0108 0 ADAPTOR SLEEVE 1
PY
7 12.99.0100 0 BLOW BAR MAGANESE 3
OPTION
O
7 12.99.0102 0 BLOW MARTENSITIC 3
C
7 12.99.0103 0 BLOW MARTENSITIC WITH CERAMIC TIP 3
R
OPTION
7 12.99.0104 0 BLOW BAR HIGH CHROME 3
E
OPTION
T
8 12.99.0106 0 LOCKING KEY C/W BOLT 9
A
12.99.0152
S 0 ROTOR ASSY COMPLETE

WITH SHAFT, BEARINGS & BLOW BARS
1
M
[Figure End]
Page 94
NAME: IMPACT APRON ASM MACHINE: I-1310 CRUSHER
P Y
CO
E R
S T
MA
Page 95
NAME: IMPACT APRON ASM MACHINE: I-1310 CRUSHER
1 12.99.0110 0 MONO FRNT IMPACT APRN 1
2 12.99.0112 0 IMPACT PLT FRNT APRON 2
3 12.00.0030 0 WASHER 8
3 26.46.30120 0 BOLT 8
BOLT WAS ORGINALLY PART NO. 12.99.0114
4 12.99.0168 0 HINGE PIN 2
5 12.99.0172 0 IMPACT ARM 1
6 12.99.0116 0 IMPACT PLT REAR APRON 4
7 12.00.0036 0 WASHER 16
7 26.46.36100 0 BOLT 16
8 12.99.0174 0 IMPACT PLATE 2
PY
9 12.00.0020 0 WASHER 8
O
9 26.44.20050 0 BOLT 8
C
10 12.99.0178 0 HINGE PIN 2
11 12.99.0164
E R 0 FRONT IMPT APRON 1
T
COMPLETE ITEM (A)
S
12 12.99.0170 0 REAR IMP APRON 1
COMPLETE ITEM (B)
[Figure End]
MA
Page 96
NAME: SPINDEL SUSPENSION FOR FRONT IMPACT APRON MACHINE: I-1310 CRUSHER
P Y
C O
E R
S T
MA
Page 97
NAME: SPINDEL SUSPENSION FOR FRONT IMPACT APRON MACHINE: I-1310 CRUSHER
1 12.99.0130 0 CROSSBEAM 1
2 12.99.0132 0 SPINDLE 2
3 12.99.0134 0 PROTECTIVE TUBE 2
5 12.99.0138 0 NUT 2
6 12.99.0140 0 SPRING WASHER 6
7 12.99.0142 0 SHAFT 2
8 12.99.0144 0 SPRING BRACKET 2
10 12.99.0122 0 SPRING_IMPT APRORN SUSP 2
PY
11 12.99.0148 0 FASTENING SCREW 2
O
C
13 12.99.0128 0 SPINDLE SUSPEN-APRON 1
R
COMPLETE UNIT, ALL ITEMS ON DRAWING
TE
[Figure End]
A S
M
Page 98
NAME: SPINDEL SUSPENSION FOR REAR IMPACT APRON MACHINE: I-1310 CRUSHER
P Y
C O
E R
S T
MA
Page 99
NAME: SPINDEL SUSPENSION FOR REAR IMPACT APRON MACHINE: I-1310 CRUSHER
1 12.99.0130 0 CROSSBEAM 1
2 12.99.0250 0 SPINDLE 2
5 12.99.0138 0 NUT 2
6 12.99.0140 0 SPRING WASHER 6
7 12.99.0254 0 SHAFT 2
8 12.99.0144 0 SPRING BRACKET 2
10 12.99.0122 0 SPRING_IMPT APRORN SUSP 2
PY
11 12.99.0148 0 FASTENING SCREW 2
O
C
13 12.99.0248 0 SPINDLE SUSPENSION COMPLETE 1
R
COMPLETE UNIT, ALL ITEMS ON DRAWING
TE
[Figure End]
A S
M
Page 100
NAME: INLET DOOR ASM MACHINE: I-1310 CRUSHER
P Y
CO
E R
S T
MA
Page 101
NAME: INLET DOOR ASM MACHINE: I-1310 CRUSHER
6 12.99.0180 0 INLET DOOR 1
7 12.99.0182 0 DOOR LOCKING COMPLETE 1
8 12.99.0184 0 BOLT FOR HOUSING 6
9 12.99.0368 0 SAFETY SWITCH 2
10 12.99.0370 0 SAFETY SWITCH KEY 2
[Figure End]
P Y
C O
E R
S T
MA
Page 102
NAME: WEAR PLATES ASM MACHINE: I-1310 CRUSHER
P Y
CO
E R
S T
MA
Page 103
1 12.99.0196 0 WEAR PLATE 2
1 26.44.20040 0 BOLT 2
2 12.99.0198 0 WEAR PLATE 2
2 26.44.20040 0 BOLT 4
3 12.99.0200 0 WEAR PLATE 2
3 26.44.20040 0 BOLT 4
PY
4 12.99.0202 0 WEAR PLATE 2
O
4 26.44.20040 0 BOLT 4
C
5 12.99.0204 0 WEAR PLATE 2
5 26.44.20040
E R 0 BOLT 4
T
S
A
M
6 26.44.20040 0 BOLT 4
6 12.99.0206 0 WEAR PLATE 2
7 12.99.0208 0 WEAR PLATE 2
7 26.44.20040 0 BOLT 4
8 12.99.0210 0 WEAR PLATE 3
8 26.44.20040 0 BOLT 6
8 12.00.0020 0 WASHER 6
9 26.44.20040 0 BOLT 8
9 12.99.0212 0 WEAR PLATE 4
10 26.44.20050 0 BOLT 4
SHELDING WITH GRINDING PATH OPTION ONLY - BOLT WAS ORGINALLY
PART NO. 12.99.0243

SHELDING WITH GRINDING PATH OPTION ONLY
Page 104
10 12.99.0266 0 WEAR PLATE 2

11 12.99.0214 0 WEAR PLATE 2
11 26.44.20040 0 BOLT 6
12 26.44.20040 0 BOLT 4
12 12.99.0216 0 WEAR PLATE 2
13 12.99.0218 0 WEAR PLATE 2
13 26.44.20040 0 BOLT 4
Y
14 26.44.20040 0 BOLT 8
P
14 12.99.0220 0 WEAR PLATE 2
C O
15 12.99.0222 0 WEAR PLATE 2
R
15 26.44.20040 0 BOLT 4
E
T
S
16
16
17
26.44.20040
12.99.0224
12.99.0226
MA 0
0
BOLT
WEAR PLATE
WEAR PLATE
6
17 26.44.20040 0 BOLT 4
18 26.44.20050 0 BOLT 4
18 12.99.0228 0 WEAR PLATE 2
19 12.99.0230 0 WEAR PLATE 3
19 12.00.0020 0 WASHER 12
19 26.44.20050 0 BOLT 12
20 12.00.0020 0 WASHER 6
20 12.99.0232 0 WEAR PLATE 3
20 26.44.20080 0 BOLT 6
Page 105
21 12.99.0234 0 WEAR PLATE 6
21 26.44.20045 0 BOLT 12
22 12.99.0236 0 WEAR PLATE 2
22 26.44.20050 0 BOLT 4
23 26.44.20050 0 BOLT 2
23 12.99.0238 0 WEAR PLATE 1
24 12.99.0240 0 CHAIN CURTAIN 1 METRE 20
24 12.99.0281 0 BOLT 5
Y
24 12.99.0282 0 NUT 5
P
24 12.99.0264 0 CHAIN CURTAIN SHAFT 1
C O
24 12.99.0265 0 CHAIN CURTAIN COVER 1
R
25 12.99.0242 0 STONE BOX 1
TE
26 12.99.0244 0 WEAR PLATE 2
S
26 26.44.20050 0 BOLT 4
A
M
27 26.44.20040 0 BOLT 4
27 12.99.0246 0 WEAR PLATE 2
28 26.44.20040 0 BOLT 4
SHELDING WITH GRINDING PATH OPTION ONLY - BOLT WAS ORGINALLY
PART NO. 12.99.0241

28 12.99.0267 0 WEAR PLATE 2
[Figure End]
Page 106
NAME: CRUSHER UNIT HYDRAULICS MACHINE: I-1310 CRUSHER
P Y
C O
E R
T
1 3
A S
M
2
Page 107
NAME: CRUSHER UNIT HYDRAULICS MACHINE: I-1310 CRUSHER
1 12.99.0188 0 HYD JACK FOR HOUSING 2
2 12.99.0190 0 HYD JACK-SUS SPINDLE 2
3 12.99.0192 0 LOCKING BAR 2
[Figure End]
P Y
C O
E R
S T
MA
Page 108
NAME: GRINDING PATH (OPTION) MACHINE: I-1310 CRUSHER
ILLUSTRATION: ILLUSTRATION 8.3.30.1
P Y
CO
E R
S T
MA
Page 109
NAME: GRINDING PATH (OPTION) MACHINE: I-1310 CRUSHER
1 12.99.0269 0 GRINDING ARM 1
2 12.99.0270 0 WEARING PLATE 2
2 12.99.0278 0 SCREW 6
2 12.99.0279 0 WASHER 6
3 12.99.0271 0 GRINDING PATH BEAM 8
4 12.99.0272 0 HINGE PIN 2
5 12.99.0268 0 GRINDING PATH COMPLETE 1

IF MACHINE SERIAL NO. UPTO FJP570092 ALSO PURCHASE PART NO.
1310.10.56 SHOWN AS ITEM NO. 32 IN THE IMPACTOR ASM ILLUSTRATION
8.3.23 ECO5050
6 12.99.0274 0 SPINDLE 2
7 12.99.0280 0 PROTECTIVE CAP 2
PY
8 12.99.0275 0 SPRING WASHER 14
O
9 12.99.0276 0 NUT WITH WASHER 2
C
10 12.99.0277 0 AXIS 2
11 12.99.0273
E R 0 SPINDLE COMPLETE FOR GRINDING PATH 2
[Figure End]
S T
MA
Page 110
NAME: IMPACTOR MISCELLANEOUS 1 MACHINE: I-1310 CRUSHER
P Y
CO
E R
S T
MA
Page 111
1 12.99.0283 0 AXIS 2
2 12.99.0284 0 WASHER 6
3 12.99.0285 0 PIN 4
4 12.99.0288 0 WASHER 6
4 12.99.0289 0 COVER 1
4 12.99.0290 0 SCREW 6
5 12.99.0286 0 COVER 2
5 12.99.0287 0 SCREW 8
5 12.99.0288 0 WASHER 8
Y
[Figure End]
O P
R C
TE
A S
M
Page 112
P Y
CO
E R
S T
MA
Page 113
1 12.99.0287 0 SCREW 10
1 12.99.0288 0 WASHER 10
1 12.99.0291 0 MOUNTING FLAP 1
2 12.99.0292 0 MOUNTING FLAP 2
2 12.99.0287 0 SCREW 10
2 12.99.0288 0 WASHER 10
3 12.99.0293 0 HINGE INLET DOOR 2
3 12.99.0294 0 PLATE 2
3 12.99.0295 0 SCREW 2
3 12.99.0296 0 LOCK NUT 2
PY
4 12.99.0182 0 DOOR LOCKING COMPLETE 1
O
5 12.99.0297 0 BUFFER 2
[Figure End]
R C
TE
A S
M
Page 114
P Y
CO
E R
S T
MA
Page 115
1 12.99.0298 0 HOUSING FOR AXIS 4
2 12.99.0299 0 HOUSING FOR AXIS 4
3 12.99.0450 0 COVER 4
4 12.99.0451 0 SCREW 12
[Figure End]
P Y
C O
E R
S T
MA
Page 116
P Y
CO
E R
S T
MA
Page 117
1 12.99.0452 0 FOUNDATION OF BEARING 2
2 12.99.0453 0 SCREW 4
3 12.99.0454 0 WASHER 4
4 12.99.0455 0 NUT 8
[Figure End]
P Y
C O
E R
S T
MA
Page 118
P Y
CO
E R
S T
MA
Page 119
1 12.99.0456 0 AXIS 1
2 12.99.0457 0 BLOCKING PIECE 1
3 12.99.0458 0 FELT RING 1
4 12.99.0459 0 SCREW C/W WASHER 1
5 12.99.0461 0 PACKING SEAL SUPPORT 1
[Figure End]
P Y
C O
E R
S T
MA
Page 120
NAME: IMPACTOR MOTOR DRIVE ASM UPTO SERIAL NO. FJP570023 MACHINE: I-1310 CRUSHER
6
15
11
22
21
12
10
13
8
20
9
16
P Y
C O
14
R 25
28
E
5
S T
26
24
A
29
M
18
4
19
3
27
1
17
23
7
Page 121
1 11.00.0145 0 SPHERICAL ROLLER BEARING 2
2 13.06.4074 0 COUPLING 1
3 11.07.1125 0 LOCATING RING 2
4 11.03.1128 0 ADAPTER SLEEVE 2
5 14.85.1106 0 SENSOR 1
7 36.01.0042 0 20X12X60 KEY 2
8 26.24.00016 0 NYLOC NUT 4
11 26.24.00020 0 NYLOC NUT 6
PY
O
13 26.44.20070 0 BOLT 2
C
14 26.44.20065 0 BOLT 4
15 10.25.7055
E R 0 MOTOR 1
S T
16 1310.10.39 0 MOTOR MNT PLT 1
A
17 13.02.6032 0 PULLEY 1
M
18 1310.10.09 0 SHAFT 1
19 11.01.1125 0 PLUMMER BLOCK HOUSING 2
20 1310.10.34 0 SPEED SENSOR WHEEL 2
21 13.04.9152 0 3030X50 TAPERLOCK BUSH 1
22 13.04.9157 0 3030X75 TAPERLOCK BUSH 1
23 13.04.9356 0 3525X75 TAPERLOCK BUSH 1
24 11.08.1125 0 HALF SEAL - 4 PACK 2
25 1310.10.12 1 MOTOR COUPLING BTM COVER 1
26 1310.10.33 1 SENSOR BRACKET 1
27 1310.10.08 1 SHIM 2
28 1310.10.10 2 MOTOR COUPLING TOP COVER 1
29 1310.10.07 3 BEARING MOUNTING MWA 1
[Figure End]
Page 122
P Y
C O
E R
S T
MA
Page 123
P Y
C O
E R
S T
MA
Page 124
NAME: IMPACTOR MOTOR DRIVE ASM FROM SERIAL NO. MACHINE: I-1310 CRUSHER
FJP570024 UPTO FJP580113
19
11
18
4
8
7
1
24
Y
17
13
P
30
23
O
22
R C 16
TE 14
15
S
20
A
25
M
10
5
21
26
29
28
5
27
2
6
3
12
Page 125
1 32.02.02012 0 3-4 INCH WASHER 16
2 13.02.6034 0 375 X 6 SPC T/L PULLEY 1
3 13.04.9387 0 4040X75 TAPERLOCK BUSH 1
4 1310.99.15 0 ALIGNMENT SPIGOT 1
7 13.06.4120 0 F140 F TYPE HUB C/W CLAMP RING 2
8 13.06.4121 0 F140 TYRE 1
9 31.18.02000 0 GREASE NIPPLE 1
10 14.85.1106 0 SENSOR 1
12 36.01.0045 0 20X12X100 KEY
P Y 1
O
14 26.24.00016
R C0 NYLOC NUT 4
E
16 26.44.16070
S T 0 METRIC COURSE SET SCREW M16X70 GR 10.9 1
A
17 13.04.9356 0 3525X75 TAPERLOCK BUSH 1
18
19 M
13.04.9201
10.25.7055
0
0
TAPERLOCK
MOTOR
1
21 1310.10.50 0 SENSOR BRACKET 1
22 1310.10.09 2 SHAFT 1
23 1310.10.49 0 SPEED SENSOR WHEEL (TYRE COUPLING) 2
26 1310.10.08 1 SHIM 2
27 11.07.1125 0 LOCATING RING 2
29 11.08.1125 0 HALF SEAL - 4 PACK 2
30 36.01.0044 0 KEY 20X12X60 1
Page 126
[Figure End]
P Y
C O
E R
S T
MA
Page 127
P Y
C O
E R
S T
MA
Page 128
FJP580114 UPTO FJP580134 INCLUDING FJP580138
19
CONTAINS ITEMS
7, 8, 13, 17, 24, 31
11
34
7
24
8
17
31
18
32
4
1
13
Y
33
P
30
O
23
22
R C 16
TE 14
15
S
20
A
9
25
M
10
5
21
26
29
28
5
27
2
6
3
12
Page 129
1 1310.10.57 0 KEEPER PLATE 1
2 13.02.6034 0 375 X 6 SPC T/L PULLEY 1
3 13.04.9387 0 4040X75 TAPERLOCK BUSH 1
4 1312.10.110 0 LAYSHAFT KEEPER PLT 1
7 13.06.4315 0 COUPLING 1
8 13.06.4316 0 COUPLING HUB 1
9 31.18.02000 0 GREASE NIPPLE 1
10 14.85.1106 0 SENSOR 1
12 36.01.0045 0 20X12X100 KEY
P Y 1
O
14 26.24.00016
R C 0 NYLOC NUT 4
E
16 26.44.16070
S T 0 METRIC COURSE SET SCREW M16X70 GR 10.9 1
A
17 13.06.4325 0 SLEEVE 4
18
19 M
12.00.0150
10.25.7055
0
0
INTERNAL CIRCLIP
MOTOR
1
21 1310.10.60 0 SENSOR BKT - (CENTA COUPLING) 1
22 1310.10.09 3 SHAFT 1
24 26.52.20090 0 CAP HEAD SCREW 4
26 1310.10.08 1 SHIM 2
27 11.07.1125 0 LOCATING RING 2
29 11.08.1125 0 HALF SEAL - 4 PACK 2
30 36.01.0044 0 KEY 20X12X60 1
31 26.52.20075 0 CAP HEAD SCREW 4
Page 130
32 26.50.20050 0 COUNTERSUNK BOLT 1
34 13.06.4314 0 COUPLING 1
CONTAINS ITEMS 7, 8, 13, 17, 24, 31
[Figure End]
P Y
C O
E R
S T
MA
Page 131
P Y
C O
E R
S T
MA
Page 132
FJP580135 EXCLUDING FJP580138
ILLUSTRATION: ILLUSTRARTION 8.3.31
7, 10, 11, 12, 13, 29, 32

CONTAINS ITEMS
33
29
35
36
37
34
10
1
7
30
13
20
32
17
12
22
11
26
P Y
24
28
O
16
C 25
27
21
E R
23
T
18
S
19
A
15
M
14
4
6
2
5
8
9
31
Page 133
1 10.25.7061 0 MOTOR 1
5 11.07.1125 0 LOCATING RING 1
6 11.08.1125 0 HALF SEAL - 4 PACK 2
7 12.00.0164 0 41MM INTERNAL CIRCLIP 1
8 13.02.6034 0 375 X 6 SPC T/L PULLEY 1
9 13.04.9387 0 4040X75 TAPERLOCK BUSH 1
10 13.06.4315 0 COUPLING 1
11 13.06.4317 0 COUPLING FLANGE
P Y 1
O
12 13.06.4318 0 CENTAFLEX HUB 1
13 13.06.4325
R C0 SLEEVE 4
E
14 1310.10.08 1 SHIM 2
15 1310.10.09
S T 3 SHAFT 1
A
17
18 M
1310.10.59
1310.10.60
0
0
SPEED SENSOR WHEEL
SENSOR BKT - (CENTA COUPLING)

2
20 1312.10.110 0 LAYSHAFT KEEPER PLT 1
21 14.85.0025 0 INDUCTIVE PROXIMITY SENSOR (ROTATION) 1

INCORRECT PART NO. ORDER ITEM 21, PART NO. 14.85.1106
21 14.85.1106 0 SENSOR 1
22 36.01.0044 0 KEY 20X12X60 1
27 26.24.00020 0 NYLOC NUT 3
29 26.52.20080 0 CAP HEAD SCREW 8
Page 134
31 36.01.0045 0 20X12X100 KEY 1
32 26.52.20075 0 CAP HEAD SCREW 4
33 13.06.4319 0 COUPLING 1
CONTAINS ITEMS 7, 10, 11, 12, 13, 29, 32
34 10.70.0124 0 X-PORT RELIEF CARTRIDGE 1
35 10.70.0126 0 X-PORT RELIEF CARTRIDGE BLOCK 1
36 10.13.1227 0 M/M ADPTR C/W O-RING 1
37 10.70.0122 0 MOTOR MOUNTING RETURN BLOCK 1
38 10.70.0120 0 X-PORT SHOCK RELIEF 1

INCLUDES ITEMS 34 & 35
[Figure End]
P Y
C O
E R
S T
MA
Page 135
P Y
C O
E R
S T
MA
Page 136
NAME: MAIN CONVEYOR ASM MACHINE: I-1310 CRUSHER
1
Y
2
O P
R C
TE
A S
M
4
Page 137
NAME: MAIN CONVEYOR ASM MACHINE: I-1310 CRUSHER
1 20.03.131001 0 MAIN CONV BELT 1
2 1310.03E 1 HEAD SECTION PHANTOM - 900MM BELT 1

3 1310.03A 2 MAIN CONV. 1ST ELEMENT RECYCLING 1
4 1310.03C 3 2ND ELEMENT PHTM 1
[Figure End]
P Y
C O
E R
S T
MA
Page 138
NAME: MAIN CONVEYOR 1ST SECTION ASM MACHINE: I-1310 CRUSHER
20
6
14
3
24
2
7
1
5
26
17
16
P Y
C O
R 22
E
18
S T
MA
25
13
10
19
15
4
21
8
11
9
23
12
Page 139
NAME: MAIN CONVEYOR 1ST SECTION ASM MACHINE: I-1310 CRUSHER
1 19.22.4535 0 CENTRE ROLLER 3
2 1310.03.12 0 CONVEYOR MTG PLATE 2
3 1310.03.42 0 FEEDBOOT CLAMP 2
4 1310.03.16 0 FEEDBOOT REAR RUBBER CLAMP 1
5 1310.03.08 0 FEEDBOOT SUPPORT 2
6 1310.03.15 0 FEEDBOOT SUPPORT FRONT 2
7 1310.03.14 0 FEEDBOOT SUPPORT MIDDLE 2
8 1175.03.81 0 ADJUSTER BOLT 2
10 1310.03.07 1 MAIN CONV FEEDBOOT REAR 1
PY
11 1310.18.01 0 IDLER DRUM 1
O
12 11.02.0250 0 MP 60 SELF-LUBE P/BLOCK BEARING 2
C
13 20.1310.03.01 0 SCRAPER RUBBER 1
14 1310.03.09
E R 1 SIDE GUARD 2
S T
15 1310.03.11 0 V-SCRAPER CLAMP 2
A
16 19.22.4020 0 WING ROLLER 6
M
17 19.22.11752 1 CONVEYOR TRACKING ROLLER 2
18 20.1310.03.02 1 FEEDBOOT SEALING RUBBER 1
19 20.1310.03.03 1 FEEDBOOT SEALING RUBBER REAR 1
20 1310.03.02 1 MAIN CONV. BASE UNIT MWA 1
21 1310.03.10 1 V - SCRAPER 1
22 1175.03.57 2 IDLER DRUM MOUNT 1
23 1175.03.58 2 IDLER DRUM MOUNT LHS 1
24 1310.03.05 2 MAIN CONV FEEDBOOT 1
25 1310.03.06 2 MAIN CONV FEEDBOOT LHS 1
26 19.22.0635 0 ROLLER MOUNT 3
[Figure End]
Page 140
NAME: MAIN CONVEYOR 2ND SECTION ASM MACHINE: I-1310 CRUSHER
28
27
44
30
49
18
50
45
22
17
19
40
2
41
34
42
21
20
33
3
Y
23
P
9
14
O
38
11
C
4
R
35
8
E
7
13
T
16
S
55
54
A
43
53
M
52
24
36
45
25
31
51
15
29
5
19
32
48
12
46
47
39
37
49
6
26
10
Page 141
2 12.15.0400 0 1 1/4" END CAP 1
3 12.08.0025 0 1 1/4" U BOLT 2
4 12.07.0020 0 1 1/4" X 3/4" SOCKET 1
5 19.30.1019 0 DISC RETURN ROLLER 4
6 1310.03.33 0 CLAMP 2
7 31.10.0749 0 3/4" BSTP X 3/4" TAIL 1
8 1175.03.03 0 ADJUSTER COVER 2
9 1310.03.13 0 BELT WEIGHER ROLLER MOUNT 1
10 1310.03.30 1 BTM SKIRT LHS 1
11 1310.03.51 0 CONVEYOR GUIDE PLATE 1
PY
12 1310.03.52 0 CONVEYOR GUIDE PLATE LHS 1
O
13 1310.03.53 0 CONVEYOR GUIDE PLATE SPACER 2
C
14 12.05.0610 0 SPRAY NOZZLE 3
15 000.03.05
E R 0 DISC RETURN ROLLER MNT PLT 8
S T
16 1310.03.29 0 FRONT SKIRTING RUBBER CLAMP 2
A
17 1310.03.41 0 M/C DUST COVER HOOP 1
M
18 1310.03.20 0 MAGNET DISCHARGE SIDE SKIRT 1
WHEN MAGNET FITTED
19 1310.03.24 0 MAGNET NON-DISCHARGE SIDE SKIRT 1
WHEN MAGNET FITTED
20 1175.03.74 0 MAGNET SKIRT LINER 1
WHEN MAGNET FITTED
21 1175.03.76 0 MAGNET SKIRT RUBBER CLAMP 2
UPTO SERIAL NO. TRX130ICPOMC75436, ECO8974
21 1160.03.44 0 DEFLECTOR CLAMP RHS 1
FROM SERIAL NO. TRX130ICPOMC75437, ECO8974
21 1160.03.45 0 DEFLECTOR CLAMP LHS 1
22 1160.03.41 0 MAGNET SKIRT RUBBER MNT LHS 1
22 1310.03.22 0 MAGNET SKIRT RUBBER MNT LHS 1
22 1160.03.43 0 MAGNET SKIRT RUBBER MNT RHS 1
23 1310.03.23 0 MAGNET SKIRT RUBBER MNT RHS 1
23 1160.03.42.01 0 POLYETH SKIRT [MAIN CONV C/W MAG] 1
24 000.03.11 0 NIP GUARD DISC 3
25 1310.03.44 0 NIP GUARD DISC 1
26 1310.03.31 0 RUBBER CLAMP 2
Page 142
27 20.1310.03.04 0 SKIRT END RUBBER 2
28 391.03.27 0 SKIRT END RUBBER CLAMP 2
29 1175.03.63 0 SKIRTING CLAMP 2

QUANITY OF 1 WHEN MAGNET FITTED
30 1175.03.64 0 SKIRTING CLAMP 2
31 14.70.1900 0 SPEEDWHEEL 1
32 19.22.4020 0 WING ROLLER 16

33 1175.03.05 1 ADJUSTER BAR 2
34 1310.03.21 1 BELT GUARD 1

WHEN MAGNET FITTED
35 1310.03.32 1 BTM SKIRT RHS 1
36 20.1310.03.05 1 FRONT SKIRT RUBBER 2
37 1310.03.27 1 LOWER SIDE SKIRT 1
PY
38 1310.03.28 1 LOWER SIDE SKIRT RHS 1
O
39 20.1310.03.06 1 LOWER SKIRTING RUBBER 2
C
40 1310.03.55 1 MAGNET DISCHARGE CHUTE LHS 1
R
40 1175.03.56 1 MAGNET CHUTE 1
E
T
41 1160.03.46.01 0 DEFLECTOR PLATE LHS 1
S
A
41 1160.03.47.01 0 DEFLECTOR PLATE RHS 1
M
41 20.1175.03.08 1 MAGNET SKIRTING RUBBER 2
42 1175.48.02 2 SPRAYBAR 1
43 1310.03.26 1 TOP LHS SKIRT 1
44 1310.03.25 1 TOP RHS SKIRT 1
45 20.1175.03.03 2 SEALING RUBBER 2

46 1310.03.03 3 2ND ELEMENT MWA 1
47 19.22.4535 0 CENTRE ROLLER 8

48 19.22.0635 0 ROLLER MOUNT 8
49 1310.03.34 0 SKIRT SEALING RUBBER 2
NO MAGNET FITTED
50 12.33.0019 0 HOSE 1
51 1175.03.87 1 LINER MOUNT 1

WHEN MAGNET FITTED
52 1175.03.88 0 SHORT MAGNET SKIRT LINER 1
WHEN MAGNET FITTED
53 1310.03.54 0 IMPACT BAR MOUNT 1
WHEN MAGNET FITTED
54 20.20.2040 0 1025MM IMPACT BAR 1
WHEN MAGNET FITTED
Page 143
55 12.08.0200 0 16MM T BOLTS(BLACK) 2
[Figure End]
P Y
C O
E R
S T
MA
Page 144
NAME: MAIN CONVEYOR HEAD SECTION ASM UPTO SERIAL NO. MACHINE: I-1310 CRUSHER
22
27
14
2
26
11
32
18
Y
31
8
P
30
C O 19
1
29
R
15
E
28
16
T
34
17
A S
33
12
M
25
9
6
5
23
13
21
35
10
7
4
24
20
Page 145
1 13.06.4016 0 COUPLING 2
2 599.15.11 0 COUPLING GUARD 2
3 1175.03.62 0 COUPLING PROTECTION PLT 1
4 1310.03.37 0 DRIVE DRUM GUARD 2
5 883.03.42 0 EYE BOLT 2
6 883.03.41 0 EYE BOLT SUPPORT 2
7 1310.03.36 0 HEAD SECTION MWA 1
8 13.06.4216 0 INSERT 1
9 26.24.00010 0 NYLOC NUT 2
11 599.15.07 0 MOTOR MNT PLATE
P Y 1
O
14 12.62.0012 0 SCRAPER MOUNTING BRACKET 2
15 1310.03.40
R C0 SCS SCRAPER MOUNTING BRACKET 2
E
16 12.62.0014 0 SCRAPER SHAFT 1
17 12.62.0013
S T 0 TENSIONER BRACKET 2
A
18 13.04.9052 0 TAPER LOCK BUSH 1
19
20 M
13.04.9054
1310.03.39
0
0
TAPERLOCK BUSH
TOP TRACKING ROLLER MNT LHS

1
21 1310.03.38 0 TOP TRACKING ROLLER MNT RHS 1
23 11.05.0223 1 FLANGE BEARING 2
24 19.22.11752 1 CONVEYOR TRACKING ROLLER 2
25 1310.18.02 1 DRIVE DRUM 1
26 12.62.0010 0 SCS SCRAPER BLADE- 150 SEGMENT 6
27 12.62.0005 0 6-BLADE TEAR-DROP SCRAPER 1

COMPLETE SCRAPER UNIT
28 12.11.0040 0 TENSION SPRING 2
29 1310.03.45 0 DISCHARGE SOCK MTG FRAME 1
30 1310.03.47 0 DISCHARGE SOCK CLAMP SHORT 2
31 1310.03.46 0 DISCHARGE SOCK CLAMP LONG 1
32 20.1310.03.07 0 DISCHARGE SOCK 1
Page 146
33 1310.18.02.01 0 DRIVE DRUM SHAFT 1
34 13.05.0201 0 COUPLING 2
35 1310.03.04 0 HEAD ADJUSTER 2
[Figure End]
P Y
C O
E R
S T
MA
Page 147
P Y
C O
E R
S T
MA
Page 148
NAME: MAIN CONVEYOR HEAD SECTION ASM FROM SERIAL NO. MACHINE: I-1310 CRUSHER
14
10
1
26
18
31
15
13
30
25
9
32
29
2
24
P Y
28
23
O
8
C
27
E R
T
21
S
22
A
19
M
12
17
7
5
11
4
3
20
16
6
Page 149
1 1160.03.21 0 COUPLING GUARD 1
2 1175.03.62 1 COUPLING PROTECTION PLATE 1
3 1310.03.37 0 DRIVE DRUM GUARD 2
4 883.03.42 0 EYE BOLT 2
5 883.03.41 0 EYE BOLT SUPPORT 2
6 1160.03.19 0 HEAD ADJUSTER 2
7 26.24.00010 0 NYLOC NUT 2
8 12.62.0013 0 TENSIONER BRACKET 2
9 13.04.9154 0 3030X60 TAPERLOCK BUSH 1
13 13.06.5013 0
P Y
RIGID COUPLING - TAPERLOCK 1
O
14 12.62.0005 0 6-BLADE TEAR-DROP SCRAPER 1
C
COMPLETE SCRAPER ASSEMBLY
R
15 1310.03.40 0 SCS SCRAPER MOUNTING BRACKET 2
E
16 1310.03.39 0 TOP TRACKING ROLLER MNT LHS 1
17 1310.03.38
S T 0 TOP TRACKING ROLLER MNT RHS 1
A
18 1160.03.20 0 TORQUE ARM 1
19
20 M
11.05.0223
19.22.11752
1
1
FLANGE BEARING
CONVEYOR TRACKING ROLLER

2
21 1310.18.02 1 DRIVE DRUM 1
22 1310.03.36 1 HEAD SECTION MWA 1
23 12.62.0012 0 SCRAPER MOUNTING BRACKET 2
24 12.62.0014 0 SCRAPER SHAFT 1
25 12.62.0010 0 SCS SCRAPER BLADE- 150 SEGMENT 6
26 12.11.0040 0 TENSION SPRING 2
27 1310.18.02.01 0 DRIVE DRUM SHAFT 1
28 13.05.0201 0 COUPLING 2
29 1310.03.45 1 DISCHARGE SOCK MTG FRAME 1

FOR I-1310RS ONLY
30 1310.03.47 0 DISCHARGE SOCK CLAMP SHORT 2
FOR I-1310RS ONLY
31 1310.03.46 0 DISCHARGE SOCK CLAMP LONG 1
FOR I-1310RS ONLY
32 20.1310.03.07 0 DISCHARGE SOCK 1
Page 150
FOR I-1310RS ONLY
[Figure End]
P Y
C O
E R
S T
MA
Page 151
P Y
C O
E R
S T
MA
Page 152
NAME: MAIN CONVEYOR TELESCOPICS ASM MACHINE: I-1310 CRUSHER
P Y
8
CO
E R
S T
A
2
1
M
3
Page 153
NAME: MAIN CONVEYOR TELESCOPICS ASM MACHINE: I-1310 CRUSHER
1 10.12.0026 0 1/2" BONDED SEAL 2
2 10.01.1110 0 1/2" X 3/8" M/M ADAPTOR DIN 3852-A 2
4 380308130 0 380308130 PIN 4
5 380308150 0 380308150 PIN 4
6 380310150 0 380310150 PIN 2
7 1310.30.06 1 MAIN CONV TELESCOPIC INNER 2
8 1310.30.05 1 MAIN CONV TELESCOPIC OUTER 1
[Figure End]
P Y
C O
E R
S T
MA
Page 154
NAME: DIRT CONVEYOR ASM (OPTION) MACHINE: I-1310 CRUSHER
FIGURE: 10-07
2 REV: A
14
11
O P
8
13
R C
9
TE
A S
1
M
10
4
3
5
7
12
6
Page 155
NAME: DIRT CONVEYOR ASM (OPTION) MACHINE: I-1310 CRUSHER
1 1175.06I 0 1310 IST ELEMENT PHANTOM 1

2 20.03.117502 0 DIRT CONVEYOR BELT 1
3 12.09.1002 0 RUBBERSTOP 1
4 380308210 0 380308210 PIN 2
5 380310090 0 380310090 PIN 2
6 1175.06.45 1 TOP LEFT SKIRT 1
7 1175.06.44 1 TOP RIGHT SKIRT 1
8 1175.06.46 0 UNDERSIDE GUARD 1
9 1175.06.47 0 UNDERSIDE GUARD 1
10 10.28.0112 1 HYDRAULIC RAM 1
PY
11 1175.06.17 1 TELESCOPIC OUTER 1
O
12 1175.06J 2 1310 2ND ELEMENT PHANTOM 1
C
13 1175.06.18 3 TELESCOPIC INNER 1
14 1175.06.16
E R 0 UNDERSIDE GUARD 2
[Figure End]
S T
MA
Page 156
NAME: DIRT CONVEYOR 1ST SECTION ASM (OPTION) MACHINE: I-1310 CRUSHER
8
34
33
27
19
20
3
11
6
18
12
4
32
Y
16
O P
R C
E
31
S T
A
22
10
M
21
23
25
28
29
26
5
24
17
9
30
Page 157
1 20.1175.06.02 0 BACK RUBBER 1
2 683.24.18 0 BACK RUBBER CLAMP 1
3 1175.06.40 0 BASE MWA 1
5 694.06.48 0 CLAMP 2
7 1175.06.42 0 LOWER LEFT SKIRT 1
8 1175.06.41 0 LOWER RIGHT SKIRT 2
9 11.02.0210 0 PILLOW BLOCK BEARING 1
10 20.694.06.03 0 PLOUGH SCRAPER 1
PY
11 19.22.0022 0 ROLLER BASE PLT 4
O
12 20.1175.06.01 0 SIDE RUBBER 2
C
16 19.22.4020 0 WING ROLLER 8
17 426.18.02
E R 1 426 IDLER DRUM 1
S T
18 694.06.33 2 ADJUSTER LHS 1
A
19 1175.06.02 1 ADJUSTER BAR 2
M
20 694.06.34 1 BEARING FIXING FLAT 2
21 1175.06.06 1 FEEDBOOT 1
23 1175.06.09 1 LEFT GUARD 1
24 694.06.36 1 PLOUGH SCRAPER 1
25 1175.06.12 1 REAR GUARD 1
26 1175.06.13 1 SIDE GUARD 1
27 1175.06.14 1 SIDE GUARD 1
28 694.06.35 2 ADJUSTER RHS 1
29 694.06.31 2 BEARING MOUNT 1
31 1175.06.07 2 FEEDBOOT LHS 1
32 1175.06.08 2 FEEDBOOT RHS 1
33 1175.06.05 2 REMOVABLE CMBR 1
Page 158
34 1175.06.15 2 SIDE GUARD 1
[Figure End]
P Y
C O
E R
S T
MA
Page 159
P Y
C O
E R
S T
MA
Page 160
NAME: DIRT CONVEYOR 2ND SECTION ASM (OPTION) MACHINE: I-1310 CRUSHER
10
11
6
3
9
30
18
25
19
2
P Y
5
23
C O
R
27
E
14
S T
24
26
MA
7
28
16
8
13
29
17
15
22
12
Page 161
1 1175.06.43 0 1310 2ND ELEMENT MWA 1
2 36.01.0030 0 KEY 1
3 11.05.0221 0 BEARING 2
5 13.06.4008 0 COUPLING 2
6 13.06.4208 0 RUBBER INSERT 1
7 426.03.18 0 DISC RETURN NIPGUARD 1
8 19.30.0710 0 DISC RTN ROLLER 1
10 532.03.09 0 MOTOR STAND 1
PY
11 532.03.10 0 MOTOR STAND COUPLING GUARD 2
O
12 19.22.0022 0 ROLLER BASE PLT 1
C
13 1175.06.60 0 SCRAPER MTG ASSEMBLY 1
14 1175.06.64
E R 0 SIDE MTG BRKT 1
S T
15 1175.06.65 0 SIDE MTG BRKT 1
A
16 20.1175.06.05 0 ROSTA SCRAPER 1
M
17 13.10.0227 0 ROSTA TENSIONER 2
18 13.04.8648 0 TAPER LOCK BUSH 1
19 13.04.8652 0 TAPERLOCK BUSH 1
22 19.22.4020 0 WING ROLLER 2
23 426.18.01 1 426 DRIVE DRUM 1
24 426.03.04 1 DRIVE DRUM MTG BRKT- LHS 1
25 426.03.03 1 DRIVE DRUM MTG BRKT- RHS 1
26 1175.06.63 0 SCRAPER CLAMP 1
27 1175.06.25 1 SCRAPER TENSIONER LHS 1
28 694.06.49 2 CHEESEGUARD 1
30 1175.06.24 3 SCRAPER TENSIONER 1
[Figure End]
Page 162
P Y
C O
E R
S T
MA
Page 163
P Y
C O
E R
S T
MA
Page 164
NAME: DIRT CONVEYOR ASM (TELESCOPIC) (OPTION) MACHINE: I-1310 CRUSHER
3
1
P Y
C O 5
E R
T
2
A S
M
4
Page 165
NAME: DIRT CONVEYOR ASM (TELESCOPIC) (OPTION) MACHINE: I-1310 CRUSHER
2 1175.06.17 1 TELESCOPIC OUTER 1
3 1175.06N 3 TELE IST ELEMENT PHANTOM 1

4 1175.06K 3 TELE SECTION PHANTOM 1
5 1175.06.18 3 TELESCOPIC INNER 1
[Figure End]
P Y
C O
E R
S T
MA
Page 166
NAME: DIRT CONVEYOR 1ST SECTION ASM (TELESCOPIC) MACHINE: I-1310 CRUSHER
(OPTION)
8
9
32
Y
31
P 17
11
O
7
C 25
5
12
E R
14
30
T
13
A S
29
16
M
20
18
19
4
10
21
2
3
23
27
24
15
26
28
6
22
Page 167
(OPTION)
1 11.02.0210 0 PILLOW BLOCK BEARING 2
2 20.1175.06.02 0 BACK RUBBER 1
3 683.24.18 0 BACK RUBBER CLAMP 1
4 1175.06.40 0 BASE MWA 1
6 694.06.48 0 CLAMP 2
8 31.18.02000 0 GREASE NIPPLE 2
10 20.694.06.03 0 PLOUGH SCRAPER 1
11 19.22.0022 0 ROLLER BASE PLT
P Y 4
O
12 20.1175.06.01 0 SIDE RUBBER 2
13 1175.06.16
R C 0 UNDERSIDE GUARD 2
E
14 19.22.4020 0 WING ROLLER 8
15 426.18.02
S T 1 426 IDLER DRUM 1
A
16 694.06.33 1 ADJUSTER LHS 1
17
18 M
1175.06.02
694.06.34
1
1
ADJUSTER BAR
BEARING FIXING FLAT

2
19 1175.06.06 1 FEEDBOOT 1
21 1175.06.09 1 LEFT GUARD 1
22 694.06.36 1 PLOUGH SCRAPER 1
23 1175.06.12 1 REAR GUARD 1
24 1175.06.13 1 SIDE GUARD 1
25 1175.06.14 1 SIDE GUARD 1
26 694.06.35 2 ADJUSTER RHS 1
29 1175.06.07 2 FEEDBOOT LHS 1
30 1175.06.08 2 FEEDBOOT RHS 1
Page 168
(OPTION)
32 1175.06.15 2 SIDE GUARD 1
[Figure End]
P Y
C O
E R
S T
MA
Page 169
P Y
C O
E R
S T
MA
Page 170
5
6
FIGURE: 10-12
(OPTION)
33
32 35
8
36
29
37
3
38
34
30
31
M
15
4 7
11 28
J-1175 - UPTO SERIAL NO. FNC560278
A
I-1312 - UPTO SERIAL NO. FGD560086 EXCLUDING FGD560057 27
21 1
23
S
22 26
19
T
10 18
20
17
E
NAME: DIRT CONVEYOR 2ND SECTION ASM (TELESCOPIC)
R
39
14
C
16
13
9
O P Y
25
24
12
REV:
Page 171
A
NAME: DIRT CONVEYOR 2ND SECTION ASM (TELESCOPIC) MACHINE: I-1310 CRUSHER
(OPTION)
3 11.05.0221 0 BEARING 2
4 1175.06.64 0 SIDE MTG BRKT 1
5 1175.06.21 0 SCRAPER MNT 1
6 760.01.62 0 SCRAPER TENSIONER ASSY RHS 1
7 1175.06.24 3 SCRAPER TENSIONER 1
8 1175.06.25 1 SCRAPER TENSIONER LHS 1
9 1175.06.50 2 TELESCOPIC 2ND SECTION MWA 1
10 1175.06.51 1 3RD SECTION TELE MWA 1
11 1175.06.52 0 TELE HEAD SECTION MWA
P Y 1
O
12 1175.06.53 1 FOLD X-MEMBER 1
13 1175.06.54
R C 0 RETURN ROLLER MTG RHS 1
E
14 1175.06.55 0 RETURN ROLLER MTG LHS 1
15 1175.06.56
S T 2 CHEESE GUARD 1
A
16 1175.06.58 1 BELT SUPPORT 1
17
18 M
13.04.8648
13.04.8652
0
0
TAPER LOCK BUSH
TAPERLOCK BUSH
1
19 13.06.4008 0 COUPLING 2
20 13.06.4208 0 RUBBER INSERT 1
21 19.22.0022 0 ROLLER BASE PLT 4
22 19.22.4018 0 CENTRE ROLLER 4
23 19.22.4020 0 WING ROLLER 4

QUANITY OF 8 NOW REPLACED WITH QUANITY OF 4 AND 4 OF ITEM 39, ITEM
39 ARE DIRECT REPLACEMENTS ECO5078
24 19.30.0710 0 DISC RTN ROLLER 1
25 426.03.18 0 DISC RETURN NIPGUARD 1
26 426.18.01 1 426 DRIVE DRUM 1
27 532.03.09 0 MOTOR STAND 1
28 532.03.10 0 MOTOR STAND COUPLING GUARD 2
29 770.04.18 1 CHEESE GUARD MTG 2
Page 172
NAME: DIRT CONVEYOR 2ND SECTION ASM (TELESCOPIC) MACHINE: I-1310 CRUSHER
(OPTION)
30 1175.06.22 1 SCRAPER MNT 1
31 20.1175.06.03 0 SCRAPER BLADE 1
32 760.01.60 1 SCRAPER TENSIONER ASSY LHS 1
33 1175.06.65 0 SIDE MTG BRKT 1
34 1175.06.64 0 SIDE MTG BRKT 1
35 13.10.0227 0 ROSTA TENSIONER 2
36 1175.06.61 0 SCRAPER 1
37 20.1175.06.05 0 ROSTA SCRAPER 1
38 1175.06.63 0 SCRAPER CLAMP 1
39 19.22.4130 0 WING ROLLER 4

REPLACES 4 OF ITEM 23 ECO5078
[Figure End]
P Y
C O
E R
S T
MA
Page 173
P Y
C O
E R
S T
MA
Page 174
NAME: CATWALK ASM MACHINE: I-1310 CRUSHER
3
1
18
17
2
16
P Y
C O
E R
S T
A
7
M
8 12
13
4
14
6
5
15
19
10
11
Page 175
NAME: CATWALK ASM MACHINE: I-1310 CRUSHER
1 1175.11.22 3 GATE - LHS 1
2 12.11.0013 1 SPRING 1
3 12.15.0610 0 CAP 6
4 12.26.0650 0 CLIP 4
5 1310.11.01 0 LHS CATWALK - 1ST SECTION 1
6 1310.11.02 0 LHS CATWALK FLOOR PANEL 1
7 1310.11.03 0 REAR HANDRAIL - LHS 1
8 1310.11.04 0 LHS CATWALK - 2ND SECTION 1
9 1310.11.05 0 HANDRAIL ASM 1
10 1310.11.06 0 CATWALK SUPPORT 1
PY
11 1312.11.11 1 LHS FIXED LADDER 1
O
12 26.24.00012 0 NYLOC NUT 18
C
14 26.44.12035
E R 0 METRIC COURSE SET SCREW M12X35 GR 10.9 17
S T
A
16 26.24.00016 0 NYLOC NUT 1
M
[Figure End]
Page 176
NAME: ELECTRIC COMPONENTS 1 MACHINE: I-1310 CRUSHER
1 2 3 4
5 6 7
P Y
8
C O
E R
S T
9
MA 10 11 12
13 14 15 16
17 18
Page 177
1 14.65.0004 1 WARNING SOUNDER 2
1 14.65.0006 0 WARNING SOUNDER 2

NEVER FITTED, ORDER ITEM 1, PART NO. 14.65.0004
2 14.03.0750 0 ANTENNA LEAD 1
UPTO SERIAL NO. TBC - TO ORDER PLEASE CONTACT THE SPARES
DEPARTMENT
2 14.03.0751 0 ANTENNA 1
2 14.96.0001 0 RADIO RECEIVER EXTENSION (5M) 1

FROM SERIAL NO. TBC - TO ORDER PLEASE CONTACT THE SPARES
DEPARTMENT

4 14.03.0604 0 I-1310/I-1310RS/J-1160 HETRONIC REMOTE HANDSET 1
(EU & ROW)
Y
P
4 14.03.0606 0 I-1310/I-1310RS/J-1160 HETRONIC REMOTE HANDSET 1
(US)
O
C
4 14.03.0625 0 I-110(RS)/I-1310(RS)/J-1160 HETRONIC REMOTE 1
R
HANDSET (EU & ROW)
E
T
4 14.03.0626 0 I-110(RS)/I-1310(RS)/J-1160 HETRONIC REMOTE 1
S
HANDSET (US)
A
M
5 12.14.3009 0 BATTERY 1
6 12.14.3010 0 RADIO REMOTE BATTERY CHARGER 1
6 12.14.3012 0 10-30V DC BATTERY CHARGER 1
7 14.03.0605 0 I-1310/I-1310RS/J-1160 HETRONIC REMOTE RECIEVER 1

(EU & ROW)
7 14.03.0607 0 I-1310/I-1310RS/J-1160 HETRONIC REMOTE RECIEVER 1

(US)
8 14.89.0018 0 BEACON (ORANGE) 1
9 14.03.0685 0 DOGLEAD 1
10 10.16.5714 0 SOLENOID VALVE 24V 1
11 12.46.0004 0 I-1310 MAIN CONVEYOR BELT SCALE 1
12 14.85.1102 0 A102 DANFOSS CONTROLLER (MAIN CONTROL 1

PANEL)
12 15.02.0801 0 IGNITION SWITCH KEY 1
13 14.29.1357 0 I-1310 SOLENOID CONTROL SYSTEM 1
14 14.85.0056 0 PRESSURE SENSOR 1
Page 178
15 14.95.1303 0 H.DUTY SQUARE MALE DOG LEAD CONNECTOR 1
16 14.95.1304 0 H.DUTY SQUARE FEMALE DOG LEAD CONNECTOR 1
17 14.85.0016 0 TEMPERATURE SENSOR 1

18 10.09.0019 0 3/4 BSP X 3/8 NPTF FEMALE INTER THREADED 1
[Figure End]
P Y
C O
E R
S T
MA
Page 179
P Y
C O
E R
S T
MA
Page 180
P Y
CO
E R
S T
MA
Page 181
1 14.85.1046 0 PDM SCREEN 1

ORDER ITEM 1, PART NO. 14.85.1100
1 14.85.1100 0 PDM SCREEN 1
REPLACES ITEM 1, PART NO. 14.85.1046
2 14.85.1047 0 E-STOP MUSHROON HEAD 1
3 14.85.1048 0 N/C CONTACT 2
4 14.85.1049 0 KEYSWITCH 1

PANEL)
6 14.85.1050 0 SAFETY RELAY 2
7 14.85.1051 0 2 POLE RELAY 1

7A
7 14.85.1071 0 2 POLE RELAY BASE 1
7B
Y
8 14.85.1052 0 1 POLE RELAY BASE 1
P
9 14.85.1053 0 1 POLE RELAY 1
C O
10 14.85.1054 0 AUTOMOTIVE FUSE HOLDER 5
R
11 14.85.1055 0 15A FUSE 1
TE
12 14.85.1056 0 10A FUSE 4
S
13 14.85.1057 0 OIL COOLER RELAY 1
14
24
MA
14.85.1104
14.85.1058
0
0
1310 CONTROLLER (PANEL HYDRAULIC CABINET)
120 OHM RESISTOR

NOT SHOWN
1
25 14.85.1059 0 30A IN-LINE FUSE 4

NOT SHOWN
26 14.85.1060 0 100A IN-LINE FUSE 2
NOT SHOWN
NOT SHOWN
31 14.85.1063 0 ESTOP1 CABLE 1
32 14.85.1064 0 ESTOP2 CABLE 1
33 14.85.1065 0 ESTOP3 CABLE 1
34 14.85.1066 0 ESTOP4 CABLE 1
35 14.85.1067 0 ESTOP5 CABLE 1
36 14.85.1068 0 ESTOP6 CABLE 1
37 14.85.1069 0 ESTOP7 CABLE 1
38 14.85.1070 0 SIREN/BEACON CABLE 1
40 14.85.1072 0 HYDRAULIC SOLENOID CABLE 9
Page 182
41 14.85.1073 0 HYDRAULIC COOLING FAN SWITCH CABLE 1
42 14.85.1074 0 HYDRAULIC LEVEL SWITCH CABLE 1
43 14.85.1075 0 CRUSHER PRESSURE TRANDUCER CABLE 1
44 14.85.1076 0 HYDRAULIC OIL TEMPERATURE CABLE 1
45 14.85.1077 0 CRUSHER SPEED SENSOR CABLE 1
46 14.85.1078 0 MAIN CONVEYOR SPEED SENSOR CABLE 1
[Figure End]
P Y
C O
E R
S T
MA
Page 183
P Y
C O
E R
S T
MA
Page 184
P Y
CO
E R
S T
MA
Page 185
1 14.85.1046 0 PDM SCREEN 1

1 14.85.1100 0 PDM SCREEN 1
3 14.85.1048 0 N/C CONTACT 2
4 14.85.1049 0 KEYSWITCH 1

PANEL)
6 14.85.1050 0 SAFETY RELAY 2
7 14.85.1051 0 2 POLE RELAY 1

7A
7 14.85.1071 0 2 POLE RELAY BASE 1
7B
Y
8 14.85.1052 0 1 POLE RELAY BASE 1
P
9 14.85.1053 0 1 POLE RELAY 1
C O
R
11 14.85.1055 0 15A FUSE 1
TE
12 14.85.1056 0 10A FUSE 4
S
14
24
MA
14.85.1104
14.85.1058
0
0
120 OHM RESISTOR

NOT SHOWN
1
25 14.85.1059 0 30A IN-LINE FUSE 4

NOT SHOWN
26 14.85.1060 0 100A IN-LINE FUSE 2
NOT SHOWN
NOT SHOWN
31 14.85.1063 0 ESTOP1 CABLE 1
32 14.85.1064 0 ESTOP2 CABLE 1
33 14.85.1065 0 ESTOP3 CABLE 1
34 14.85.1066 0 ESTOP4 CABLE 1
35 14.85.1067 0 ESTOP5 CABLE 1
36 14.85.1068 0 ESTOP6 CABLE 1
37 14.85.1069 0 ESTOP7 CABLE 1
Page 186
[Figure End]
P Y
C O
E R
S T
MA
Page 187
P Y
C O
E R
S T
MA
Page 188
P Y
CO
E R
S T
MA
Page 189
1 14.85.1046 0 PDM SCREEN 1

1 14.85.1100 0 PDM SCREEN 1
3 14.85.1048 0 N/C CONTACT 2
4 14.85.1049 0 KEYSWITCH 1

PANEL)
6 14.85.1050 0 SAFETY RELAY 2
7 14.85.1051 0 2 POLE RELAY 1

7A
7 14.85.1071 0 2 POLE RELAY BASE 1
7B
Y
8 14.85.1052 0 1 POLE RELAY BASE 1
P
9 14.85.1053 0 1 POLE RELAY 1
C O
R
11 14.85.1055 0 15A FUSE 1
TE
12 14.85.1056 0 10A FUSE 4
S
14
24
MA
14.85.1104
14.85.1058
0
0
120 OHM RESISTOR

NOT SHOWN
1
25 14.85.1059 0 30A IN-LINE FUSE 4

NOT SHOWN
26 14.85.1060 0 100A IN-LINE FUSE 2
NOT SHOWN
NOT SHOWN
31 14.85.1063 0 ESTOP1 CABLE 1
32 14.85.1064 0 ESTOP2 CABLE 1
33 14.85.1065 0 ESTOP3 CABLE 1
34 14.85.1066 0 ESTOP4 CABLE 1
35 14.85.1067 0 ESTOP5 CABLE 1
36 14.85.1068 0 ESTOP6 CABLE 1
37 14.85.1069 0 ESTOP7 CABLE 1
Page 190
[Figure End]
P Y
C O
E R
S T
MA
Page 191
P Y
C O
E R
S T
MA
Page 192
NAME: ELECTRIC SCHEMATICS MACHINE: I-1310 CRUSHER
P Y
CO
E R
S T
MA
Page 193
NAME: ELECTRIC SCHEMATICS MACHINE: I-1310 CRUSHER
[Figure End]
P Y
C O
E R
S T
MA
Page 194
NAME: MAIN BUILD HYDRAULICS 1 MACHINE: I-1310 CRUSHER
4
5
6
P Y
C O
R
2
E
1
S T
MA
11
13
7
8
12
12
5
17
4
15
16
18
3
10
15
19
14
9
9
14
18
10
Page 195
1 131005.07 2 HYDRAULIC HOSE 1
7 10.26.0026 0 28MM DOUBLE BODY 7
8 10.26.0025 0 GP 3 22MM DOUBLE CLAMP & COVER PLATE 5
9 131005.38 1 VGF MOTOR -> VGF BH (DRAIN) 1
10 131005.37 1 VGF MOTOR -> VGF BH (RTN) 1
PY
11 10.26.0061 0 32MM DOUBLE BODY (PROFILED) & COVER PLT 4
O
12 10.26.0020 0 WELD PLATE 12
C
13 10.26.0035 0 WELD PLATE 4
14 10.01.1114
E R 0 1/2" X 1/2" M/M ADAPTOR DIN 3852-A 1
S T
15 10.12.0026 0 1/2" BONDED SEAL 2
A
16 10.16.5059 0 CHECK VALVE 1
M
[Figure End]
Page 196
9
8
12
8
11
7
9
3
4
2
P Y
C O
R
1
18
E 13
1
T
16
S
14
17
MA
16
10
15
2
15
6
5
Page 197
3 131005.30 0 HYDRO PUMP B TO CRUSHER MOTOR B 1
4 131005.31 0 HYDRO PUMP E TO CRUSHER MOTOR L1 1
5 131005.36 0 VGF BH -> VGF MOTOR (PR) 1
PY
11 10.26.0026 0 28MM DOUBLE BODY 9
O
12 10.26.0020 0 WELD PLATE 8
C
13 10.26.0040 0 18MM DOUBLE BODY (PROFILED) 2
14 10.26.0021
E R 0 SP 2D WELD PLATE 1
S T
15 10.04.1218 0 3/4" X 3/4" X 3/4" M/M/F ADAPTER 2
A
16 10.12.0027 0 3/4" BONDED SEAL 2
M
17 10.16.5060 0 NON RETURN VALVE 1
18 10.01.1118 0 3/4" X 3/4" M/M ADAPTOR DIN 3852-A 1
[Figure End]
Page 198
4
9
8
2
Y
3
O P
C
6
7
E R
S T 1
MA
10
11
1
2
5
Page 199
7 10.26.0035 0 WELD PLATE 4
9 10.26.0021 0 SP 2D WELD PLATE 2
10 10.26.0026 0 28MM DOUBLE BODY 6
P Y
11 10.26.0020 0 WELD PLATE 6
O
[Figure End]
R C
TE
A S
M
Page 200
4
6
7
8
Y
10
P
9
C O
E R
S T
3
MA
2
6
1
3
5
2
Page 201
3 131005.29 0 HYDROSTATIC PUMP A TO CRUSHER MOTOR A 1
7 10.26.0026 0 28MM DOUBLE BODY 3
8 10.26.0020 0 WELD PLATE 3
10 10.26.0035 0 WELD PLATE 1
[Figure End]
P Y
C O
E R
S T
MA
Page 202
41
45
44
41
FIGURE: 13-05
41 41
41
13 43
40
41 40
31 31
30 25
40 27 41
29
31 13
29
42
32 31
26
M
NAME: MAIN BUILD HYDRAULICS 5
23
28 23
32
22
A
22 19
33 23
34 22
35
S
30
36
28 16 20
37 26 15
38
T
38
38
39
18 24
39
E
39 17
41 22
41 4
41 23
18
17 18
R
26 21
1
25 17
C
7
4
6
2
O P
11
1
12 14
2 13
Y
14
8 3 12
7
14
3
REV:
4
5
Page 203
A
6 10.26.0026 0 28MM DOUBLE BODY 6
7 10.26.0020 0 WELD PLATE 7
10 10.26.0035 0 WELD PLATE 1
PY
12 10.01.1118 0 3/4" X 3/4" M/M ADAPTOR DIN 3852-A 2
O
13 10.01.1115 0 3/4" X 1/2" M/M ADAPTOR DIN 3852-A 2
C
14 10.12.0027 0 3/4" BONDED SEAL 3
15 131006.01
E R 0 HYDRAULIC HOSE 1
S T
A
17 131005.39 1 CV401 BANK ->6 PRT CHECK VALVE V2 1
M
18 131005.40 1 CV401 BANK ->6 PRT CHECK VALVE V1 1
19 131005.41 0 6 PRT CHECK VALVE C3 ->RHS RAM PULL PRT 1
20 131005.42 0 6 PRT CHECK VALVE C4 ->LHS RAM PULL PRT 1
22 10.01.1109 0 3/8" X 3/8" M/M ADAPTOR DIN 3852-A 4
23 10.12.0025 0 3/8" BONDED SEAL 4
24 10.16.0056 0 P.O.CHECK VALVE 1
25 131002.07 1 LEFT HOPPER FLARE RAM EXTEND TO BANK 1
26 131002.08 1 LEFT HOPPER FLARE RAM RETRACT TO BANK 1
27 131002.09 1 BACK HOPPER FLARE RAM EXTEND TO BANK 1
28 131002.10 1 BACK HOPPER FLARE RAM RETRACT TO BANK 1
29 131002.11 1 RIGHT HOPPER FLARE RAM EXTEND TO BANK 1
30 131002.12 1 RIGHT HOPPER FLARE RAM RETRACT TO BANK 1
31 131005.32 0 T ON 5317 TO TEE ON 5317 1
Page 204
32 10.03.1105 0 1/4" X 1/4" X 2" BULKHEAD ADAPTOR 2
33 10.26.0022 0 14MM DOUBLE CLAMP (PROFILED) 4
34 10.26.0021 0 SP 2D WELD PLATE 4
35 10.16.5317 0 CONTROL VALVE 2
37 10.16.5384 1 CONTROL VALVE 6
38 10.01.1206 0 1/4" X 3/8" M/F ADAPTOR 3
40 10.01.1107 0 1/4" X 1/2" M/M ADAPTOR DIN 3852-A 3
41 10.12.0026 0 1/2" BONDED SEAL 10
42 10.04.1218 0 3/4" X 3/4" X 3/4" M/M/F ADAPTER 1
43 10.19.5363 0 HIGH PRESSURE CARRY-OVER ADAPTOR 1
PY
O
45 10.01.1214 0 1/2" TO 1/2" BSP M/F ADAPTER 1
C
[Figure End]
E R
S T
MA
Page 205
P Y
C O
E R
S T
MA
Page 206
NAME: HYDRAULIC CIRCUIT DIAGRAM WITHOUT WATERPUMP MACHINE: I-1310 CRUSHER
P Y
C O
E R
S T
MA
Page 207
NAME: HYDRAULIC CIRCUIT DIAGRAM WITHOUT WATERPUMP MACHINE: I-1310 CRUSHER
[Figure End]
P Y
C O
E R
S T
MA
Page 208
NAME: HYDRAULIC CIRCUIT DIAGRAM WITH WATERPUMP MACHINE: I-1310 CRUSHER
P Y
C O
E R
S T
MA
Page 209
NAME: HYDRAULIC CIRCUIT DIAGRAM WITH WATERPUMP MACHINE: I-1310 CRUSHER
[Figure End]
P Y
C O
E R
S T
MA
Page 210
NAME: HOPPER HYDRAULICS MACHINE: I-1310 CRUSHER
4
6
9
1
1
2
P Y
O
5
C
8
E R 2
T 1
2
A S
1
M
1
2
3
4
2
7
1
Page 211
NAME: HOPPER HYDRAULICS MACHINE: I-1310 CRUSHER
1 10.12.0026 0 1/2" BONDED SEAL 6
2 10.01.1107 0 1/4" X 1/2" M/M ADAPTOR DIN 3852-A 6
3 131002.04 0 VGF HOPPER LOWER-SIDE 1
4 10.03.1105 0 1/4" X 1/4" X 2" BULKHEAD ADAPTOR 4
5 131002.06 0 VGF HOPPER LIFT-REAR 1
6 131002.01 0 VGF HOPPER LIFT-SIDE 1
7 131002.03 0 VGF HOPPER LIFT-SIDE 1
8 131002.05 0 VGF HOPPER LOWER-REAR 1
9 131002.02 0 VGF HOPPER LOWER-SIDE 1
Y
[Figure End]
O P
R C
TE
A S
M
Page 212
NAME: MAIN CONVEYOR HYDRAULICS MACHINE: I-1310 CRUSHER
22
21
20
19
22
18
6
21
10
17
10
4
6
15
5
17
14
P Y 14
2
13
13
14
14
O
7
13
C 12
13
12
R
12
12
7
8
E
2
T 3
A S
M
1
4
11
15
16
16
2
HEAD SECTION
11
11
3
7
11
Page 213
NAME: MAIN CONVEYOR HYDRAULICS MACHINE: I-1310 CRUSHER
1 131001.03 1 CONVEYOR MTR WEEP B/HEAD TO B/HEAD 1
2 131001.04 0 LEFT DRIVE BEARING TO TOP B-HEAD 1
3 131001.06 0 LEFT IDLER BEARING TO BTM B-HEAD 1
4 131001.01 0 MAIN CONV DRIVE PR B/HEAD TO B/HEAD 1
5 131001.02 0 MAIN CONV DRIVE RTN B/HEAD TO B/HEAD 1
6 131001.08 0 MOTOR RTN TO BULKHEAD 1
7 131001.05 0 RIGHT DRIVE BEARING TO 2ND B-HEAD 1
8 131001.07 0 RIGHT IDLER BEARING TO 3RD B-HEAD 1
9 117501.01-01 3 MAINCONV. DRIVE PR 1
10 117501.03-01 3 MAINCONVEYOR PIPING 1
PY
12 10.26.0026 0 28MM DOUBLE BODY 4
O
C
14 31.18.02000 0 GREASE NIPPLE 4
15 10.03.1110
E R 0 BULKHEAD ADAPTER 2
S T
A
M
18 10.01.1118 0 3/4" X 3/4" M/M ADAPTOR DIN 3852-A 1
19 10.12.0027 0 3/4" BONDED SEAL 2
21 10.01.1119 0 1" X 3/4" M/M ADAPTOR DIN 3852-A 2
22 10.12.0028 0 1" BONDED SEAL 2
[Figure End]
Page 214
NAME: DIRT CONVEYOR HYDRAULICS MACHINE: I-1310 CRUSHER
14
7
16
15
3
2
14
1
6
Y
16
P
15
C O
R
9
E
11
T
10
S
11
MA
10
15
13
16
12
15
16
17
18
14
5
4
8
17
14
18
Page 215
NAME: DIRT CONVEYOR HYDRAULICS MACHINE: I-1310 CRUSHER
1 131003.05 0 DIRT CONVEYOR DRAIN 1
2 131003.03 1 DIRT CONVEYOR PRESSURE 1
3 131003.04 1 DIRT CONVEYOR RETURN 1
4 117503.08 0 FOLD PIPE 1
5 117503.09 0 FOLD PIPE 1
6 117503.07 0 TAIL GREASE LEFT 1
7 117503.06 0 TAIL GREASE RIGHT 1
8 131003.02 0 HEAD GREASE LEFT 1
9 131003.01 0 HEAD GREASE RIGHT 1
10 10.01.1115 0 3/4" X 1/2" M/M ADAPTOR DIN 3852-A 2
PY
11 10.12.0027 0 3/4" BONDED SEAL 2
O
12 10.01.1106 0 3/8" X 1/4" M/M ADAPTOR DIN 3852-A 1
C
13 10.12.0024 0 1/4" BONDED SEAL 1
15 10.02.1206
E R 0 90 BLOCK ELBOW 4
S T
16 31.18.02000 0 GREASE NIPPLE 4
A
17 10.01.1110 0 1/2" X 3/8" M/M ADAPTOR DIN 3852-A 2
M
18 10.12.0026 0 1/2" BONDED SEAL 2
[Figure End]
Page 216
NAME: POWERUNIT HYD 1 FROM FJP570051 UPTO FJP570095 MACHINE: I-1310 CRUSHER
18
11
17
7
31
16
4
25
20
3
13
18
14
21
15
20
16
33
19
32
18
7
21
33
37
17
23
17
28
12
6
27
8
Y
26
P
27
12
O
35
9
34
C
5
36
R
41
27
2
40
28
TE 21
4
23
3
38
39
24
S
25
22
MA
9
2
22
23
24
21
10
30
10
5
16
29
10
17
18
5
Page 217
1 131015.18 0 4-WAY TEE ON OIL COOLER TO 5 BAR CHECK VALVE 1
2 131015.01 0 1ST 56CC PUMP INLET TO SUCTION A 1
3 131015.04 0 1ST 56CC PUMP OUTLET TO BLOCK B PORT P3 1
4 131015.05 0 2ND 56CC PUMP OUTLET TO BLOCK A PORT P1 1
5 131015.03 0 CHARGE PUMP INLET TO SUCTION B 1
6 131015.08 0 OIL-COOLER RETURN TO MANIFOLD 1
7 131015.12 0 SOLENOID BLOCK B PORT H TO BH3 1
8 131015.16 0 SOLENOID BLOCK B PORT P2 TO CV403 PR 1
9 131015.02 1 2ND 56CC PUMP INLET TO SUCTION E 1
10 131015.06 1 CHARGE PUMP PR TO H/STATIC PUMP PORT C 1
PY
11 131015.19 2 4-WAY TEE ON OIL COOLER TO 10 BAR CHECK VALVE 1
O
12 131015.21 2 SOLENOID BLOCK A PORT C TO MAGNET PR B/HEAD 1
C
13 10.04.0018 0 3/4" MALE CROSS 1
14 12.01.2240
E R 0 3/4X3/4 F/F SWIVEL 90 SWEPT 1
S T
15 10.01.1120 0 1-1/4" X 3/4" M/M ADAPTOR DIN 3852-A 1
A
16 10.12.0029 0 1 1/4" BONDED SEAL 3
M
17 10.01.1118 0 3/4" X 3/4" M/M ADAPTOR DIN 3852-A 4
18 10.12.0027 0 3/4" BONDED SEAL 4
20 10.01.1119 0 1" X 3/4" M/M ADAPTOR DIN 3852-A 2
21 10.12.0028 0 1" BONDED SEAL 4
22 10.01.1132 0 1-1/2" X 1-1/2" M/M ADAPTOR DIN 3852-A 2
24 10.12.0030 0 1 1/2" BONDED SEAL 2
25 10.36.0015 0 1" M/F TEST POINT 2
26 10.01.1114 0 1/2" X 1/2" M/M ADAPTOR DIN 3852-A 1
27 10.12.0026 0 1/2" BONDED SEAL 3
29 10.01.1129 0 1-1/2" X 1-1/4" M/M ADAPTOR DIN 3852-A 1
30 10.13.1209 0 ADAPTOR 1
Page 218
31 10.01.1123 0 1-1/4" X 1" M/M ADAPTOR DIN 3852-A 1
32 10.16.5064 0 CHECK VALVE 1
34 10.36.0010 0 3/4" TEST POINT 1
35 10.01.1115 0 3/4" X 1/2" M/M ADAPTOR DIN 3852-A 1
36 10.16.5317 0 CONTROL VALVE 1
38 10.26.0059 0 CLAMP C/W COVER PLT 2
40 10.02.1217 0 1/2X1/2 M/F SWIVEL 90 SWEPT 1
41 10.16.5714 0 SOLENOID VALVE 24V 1
[Figure End]
P Y
C O
E R
S T
MA
Page 219
P Y
C O
E R
S T
MA
Page 220
23
23
26
7
26
4
29
6
29
5
27
8
27
31
30
31
30
31
30
18
28 28
18
3
23
23
9
Y
22
27
26
11
17
P
11
O 28
2
C
16
18
25
R
24
E
10
T
25
S
9
24
A
15
18
M
14
13
1
20
21
19
12
Page 221
1 131015.07 0 H/STATIC PUMP DRAIN PORT F TO MANIFOLD 1
3 131015.09 0 SOLENOID BLOCK A PORT T TO MANIFOLD 1
4 131015.13 0 SOLENOID BLOCK B PORT E TO BH4 1
6 131015.14 0 SOLENOID BLOCK B PORT F2 TO BH5 1
7 131015.11 0 SOLENOID BLOCK B PORT G TO BH2 1
8 131015.10 0 SOLENOID BLOCK B PORT T TO MANIFOLD 1
9 131015.17 1 CV403 T2 PORT TO MANIFOLD 1
P Y
11 131015.20 2 SOLENOID BLOCK A PORT C2 TO MAGNET RTN 1
B/HEAD
C O
R
TE
S
16
17
MA
10.42.0045
10.42.0046
0
0
SOLENOID VALVE
SOLENIOD VALVE
1
18 10.26.0026 0 28MM DOUBLE BODY 4
19 10.19.5387 0 CONTROL VALVE 1
20 10.19.5389 0 CABLE 1
21 10.13.1223 0 1-1/16"-12->3/4"BSP M/M ADAPTOR C/W O-RING 1
22 10.01.1119 0 1" X 3/4" M/M ADAPTOR DIN 3852-A 1
23 10.12.0028 0 1" BONDED SEAL 4
24 10.01.1129 0 1-1/2" X 1-1/4" M/M ADAPTOR DIN 3852-A 2
25 10.12.0029 0 1 1/4" BONDED SEAL 2
28 10.01.1114 0 1/2" X 1/2" M/M ADAPTOR DIN 3852-A 3
Page 222
30 10.01.1118 0 3/4" X 3/4" M/M ADAPTOR DIN 3852-A 3
31 10.12.0027 0 3/4" BONDED SEAL 3
[Figure End]
P Y
C O
E R
S T
MA
Page 223
P Y
C O
E R
S T
MA
Page 224
INCLUDING FJP580138
15
7
14
15
14
9
16
21
22
17
8
18
21
Y
5
22
P
4
26
C O
15
17
20
20
27
6
R 4
5
11
E
10
11
T
10
16
15
A S 14
2
M
2
3
15
14
1
1
23
6
24
19
25
3
12
13
Page 225
INCLUDING FJP580138
1 131015.01 0 1ST 56CC PUMP INLET TO SUCTION A 1
2 131015.02 1 2ND 56CC PUMP INLET TO SUCTION E 1
3 131015.03 0 CHARGE PUMP INLET TO SUCTION B 1
4 131015.04 0 1ST 56CC PUMP OUTLET TO BLOCK B PORT P3 1
6 131015.07 0 H/STATIC PUMP DRAIN PORT F TO MANIFOLD 1
7 131015.10 0 SOLENOID BLOCK B PORT T TO MANIFOLD 1
8 131015.20 2 SOLENOID BLOCK A PORT C2 TO MAGNET RTN 1

B/HEAD
9 131015.21 2 SOLENOID BLOCK A PORT C TO MAGNET PR B/HEAD 1
PY
10 10.01.1132 0 1-1/2" X 1-1/2" M/M ADAPTOR DIN 3852-A 2
O
11 10.12.0030 0 1 1/2" BONDED SEAL 2
C
12 10.01.1129 0 1-1/2" X 1-1/4" M/M ADAPTOR DIN 3852-A 1
E R
13 10.12.0029 0 1 1/4" BONDED SEAL 1
T
15
A
10.12.0028
S 0 1" BONDED SEAL 5
M
16 10.36.0015 0 1" M/F TEST POINT 2
17 10.01.1119 0 1" X 3/4" M/M ADAPTOR DIN 3852-A 2
18 10.12.0027 0 3/4" BONDED SEAL 1
19 10.13.1223 0 1-1/16"-12->3/4"BSP M/M ADAPTOR C/W O-RING 1
21 10.01.1114 0 1/2" X 1/2" M/M ADAPTOR DIN 3852-A 2
22 10.12.0026 0 1/2" BONDED SEAL 2
23 10.26.0059 0 CLAMP C/W COVER PLT 2
25 10.26.0026 0 28MM DOUBLE BODY 1
26 10.26.0028 0 42MM DOUBLE BODY (PROFILED) & TOP PLATE 1
[Figure End]
Page 226
INCLUDING FJP580138
13
12
6
11
3
20
13
13 13
15
16
14
15
16
4
15
16
5
29
17
25
18
Y
20
P
24
O
15
C
23
E R
T
1
28
A S
6
M
10
10
32
9
19
21
22
21
10
34
19
8
33
30
31
27
26
Page 227
INCLUDING FJP580138
3 131015.12 0 SOLENOID BLOCK B PORT H TO BH3 1
4 131015.13 0 SOLENOID BLOCK B PORT E TO BH4 1
5 131015.14 0 SOLENOID BLOCK B PORT F2 TO BH5 1
9 10.01.1129 0 1-1/2" X 1-1/4" M/M ADAPTOR DIN 3852-A 1
10 10.12.0029 0 1 1/4" BONDED SEAL 3
11 10.01.1118 0
P Y
3/4" X 3/4" M/M ADAPTOR DIN 3852-A 1
O
12 10.16.5064 0 CHECK VALVE 1
13 10.03.1116
R C 0 BULKHEAD ADAPTER 4
E
15 10.01.1118
S T 0 3/4" X 3/4" M/M ADAPTOR DIN 3852-A 4
A
16 10.12.0027 0 3/4" BONDED SEAL 3
17
18 M
10.01.1114
10.12.0026
0
0
1/2" X 1/2" M/M ADAPTOR DIN 3852-A
1/2" BONDED SEAL

1
19 10.01.1123 0 1-1/4" X 1" M/M ADAPTOR DIN 3852-A 2
20 10.01.1119 0 1" X 3/4" M/M ADAPTOR DIN 3852-A 2
21 10.01.1219 0 3/4"M X 1"F ADAPTER 2
22 10.04.1219 0 1"M X 1"F X 1"M TEE 1
23 10.04.1218 0 3/4" X 3/4" X 3/4" M/M/F ADAPTER 1
25 10.12.0028 0 1" BONDED SEAL 1
27 10.19.5387 0 CONTROL VALVE 1
28 10.42.0045 0 SOLENOID VALVE 1
29 10.42.0046 0 SOLENIOD VALVE 1
Page 228
INCLUDING FJP580138
33 10.19.5389 0 CABLE 1
34 10.26.0026 0 28MM DOUBLE BODY 1
[Figure End]
P Y
C O
E R
S T
MA
Page 229
P Y
C O
E R
S T
MA
Page 230
INCLUDING FJP580138
14
13
15
4
12
16
11
6
11
12
11
12
17
18
P Y
C O
R
1
18
6
9
20
E
8
19
S T 18
21
24
23
A
22
M
7
10
2
11
12
Page 231
INCLUDING FJP580138
2 131015.06 1 CHARGE PUMP PR TO H/STATIC PUMP PORT C 1
3 131015.09 0 SOLENOID BLOCK A PORT T TO MANIFOLD 1
5 131015.15 0 SOLENOID BLOCK B PORT F TO BH6 1
6 131015.16 0 SOLENOID BLOCK B PORT P2 TO CV403 PR 1
7 131015.17 1 CV403 T2 PORT TO MANIFOLD 1
8 10.01.1129 0 1-1/2" X 1-1/4" M/M ADAPTOR DIN 3852-A 1
9 10.12.0029 0 1 1/4" BONDED SEAL 1
10 10.13.1209 0 ADAPTOR 1
11 10.01.1118 0
P Y
3/4" X 3/4" M/M ADAPTOR DIN 3852-A 3
O
12 10.12.0027 0 3/4" BONDED SEAL 3
13 10.03.1124
R C 0 BULKHEAD ADAPTER 1
E
14 10.12.0028 0 1" BONDED SEAL 1
15 10.03.1116
S T 0 BULKHEAD ADAPTER 1
A
17
18 M
10.01.1114
10.12.0026
0
0
1/2" X 1/2" M/M ADAPTOR DIN 3852-A
1/2" BONDED SEAL

1
19 10.36.0010 0 3/4" TEST POINT 1
20 10.01.1115 0 3/4" X 1/2" M/M ADAPTOR DIN 3852-A 1
21 10.16.5317 0 CONTROL VALVE 1
22 10.16.5714 0 SOLENOID VALVE 24V 1
23 10.02.1217 0 1/2X1/2 M/F SWIVEL 90 SWEPT 1
[Figure End]
Page 232
NAME: UNDERTRAY FEEDER ASM MACHINE: I-1310 CRUSHER
16
12
13
10
17
8
P Y
14
C O
15
E R
T
9
A S
6
M
7
20
21
18
11
19
5
4
1
Page 233
NAME: UNDERTRAY FEEDER ASM MACHINE: I-1310 CRUSHER
1 10.01.2238 0 3/4 UNF ->3/8" BSP M/M ADAPT C/W O-RING 2
2 10.04.1218 0 3/4" X 3/4" X 3/4" M/M/F ADAPTER 2
3 10.04.1209 0 3/8 MFM ADAPTER 1
4 10.13.1218 0 ADAPTOR 4
5 10.25.8066 0 MOTOR 2
6 31.08.0056 0 VIBRATOR UNIT 2
7 1310.05.57 1 REAR SEALING RUBBER CLAMP 1
8 1310.05.60 0 SECONDARY FEEDER FRONT WEAR PLT 1
9 1310.05.61 0 SECONDARY FEEDER REAR WEAR PLT 1
10 1310.05.63 0 SECONDARY FEEDER REAR WEAR PLT LHS 1
PY
11 1310.05.64 0 SECONDARY FEEDER REAR WEAR PLT LHS 1
O
12 1310.05.62 0 SECONDARY FEEDER SIDE WEAR PLT - FRONT LHS 1
C
13 1310.05.65 0 SECONDARY FEEDER WEAR PLATE FRONT 1
14 1310.05.56
E R 1 SIDE SEALING RUBBERCLAMP 2
S T
15 12.11.0091 0 UNDERPAN FEEDER SPRING 6
A
16 1310.05.55 1 SECONDARY VIBRATORY FEEDER MWA 1
M
17 20.1310.05.02 1 SIDE SEALING RUBBER 2
18 20.1310.05.03 2 SIDE SEALING RUBBER 1
19 20.1310.05.06 0 UNDER-PAN CLEANING RUBBER 1
20 15.35.0173 0 COUPLING COMPLETE 2
21 31.08.0066 0 VIBRATOR COVER 2
[Figure End]
Page 234
NAME: BY-PASS CHUTE ASM UPTO SERIAL NO. FJP570086 MACHINE: I-1310 CRUSHER
13
8
3
14
16
2
17
P Y
C O
7
4
E R
9
S T
15
MA
18
22
12
19
21
10
20
1
11
Page 235
NAME: BY-PASS CHUTE ASM UPTO SERIAL NO. FJP570086 MACHINE: I-1310 CRUSHER
1 1310.23.05 0 BACK PLATE 1
2 11.05.0120 0 BEARING 2
3 1310.23.03 0 BOLT ON FRONT 1
4 20.1310.23.01 0 BYPASS CHUTE SEALING RUBBER 1
5 20.1310.23.02 0 BYPASS CHUTE SEALING RUBBER OPPOSITE 1
6 1310.23.04 0 CHUTE FLAP 1
7 1310.23.02 0 CHUTE LINER 2
8 20.1310.23.03 0 CONNECTING PLATE RUBBER 1
9 20.1310.23.04 0 CONNECTING PLATE RUBBER LHS 1
10 12.01.0008 0 FASTENER 2
PY
11 1310.23.22 0 RUBBER CLAMP BACK 2
O
12 1310.23.19 0 SEALING RUBBER CLAMP 2
C
13 1310.23.35 1 BYPASS CHUTE ACCESS PLATE 2
14 1310.23.20
E R 1 CHUTE/IMPACTOR CONNECTOR 1
S T
15 1310.23.21 1 RUBBER CLAMP 2
A
16 1310.23.23 2 1310 DEFLECTOR HANDLE 1
M
17 1175.23.03 2 FLAP HINGE BAR 2
18 1310.23.01 3 BY-PASS CHUTE MWA 1
19 1312.23.56 0 DISCHARGE RUBBER CLAMP 2
20 20.1310.23.05 0 DIRT CONV. DISCHARGE RUBBER 1
21 1310.23.36 0 SOCK CLAMP 1
22 20.1310.23.06 0 BY-PASS CHUTE SOCK 1
[Figure End]
Page 236
NAME: BY-PASS CHUTE ASM FROM SERIAL NO. FJP570087 MACHINE: I-1310 CRUSHER
12
23
7
22
8 11
19
15
18
O PY 4
R C 21
TE
S
25
9
14 MA 24
3
13
20 5
6 16
17
1
10
Page 237
NAME: BY-PASS CHUTE ASM FROM SERIAL NO. FJP570087 MACHINE: I-1310 CRUSHER
1 26.54.12045 0 COUNTER SUNK SOCKET HEAD 4
2 1310.23.05 0 BACK PLATE 1
3 11.05.0120 0 BEARING 2
4 1310.23.03 0 BOLT ON FRONT 1
5 1310.23.38 0 BY-PASS CHUTE MWA 1
6 20.1310.23.06 0 BY-PASS CHUTE SOCK 1
7 20.1310.23.01 0 BYPASS CHUTE SEALING RUBBER 1
8 20.1310.23.02 0 BYPASS CHUTE SEALING RUBBER OPPOSITE 1
9 1310.23.04 0 CHUTE FLAP 1
10 1310.23.39 0 CHUTE LINER 2
PY
10 1310.23.44 0 CHUTE LINER MK3 2
O
11 20.1310.23.03 0 CONNECTING PLATE RUBBER 1
C
12 20.1310.23.04 0 CONNECTING PLATE RUBBER LHS 1
13 20.1310.23.05
E R 0 DIRT CONV. DISCHARGE RUBBER 1
S T
14 1312.23.56 0 DISCHARGE RUBBER CLAMP 2
A
15 12.01.0008 0 FASTENER 2
M
16 26.24.00012 0 NYLOC NUT 12
18 1310.23.22 0 RUBBER CLAMP BACK 2
19 1310.23.19 0 SEALING RUBBER CLAMP 2
20 1310.23.36 0 SOCK CLAMP 1
21 1310.23.35 1 BYPASS CHUTE ACCESS PLATE 2
22 1310.23.20 1 CHUTE/IMPACTOR CONNECTOR 1
23 1310.23.21 1 RUBBER CLAMP 2
24 1310.23.23 2 1310 DEFLECTOR HANDLE 1
25 1175.23.03 2 FLAP HINGE BAR 1
[Figure End]
PY
C O
E R
S T
MA
PY
C O
E R
S T
MA
www.terex.com
Terex, Drumquin Road, Omagh, Co. Tyrone, BT78 5PN, Northern Ireland,
Tel: +44 (0) 2882 418700, Fax: +44 (0) 2882 418700, E-mail: [email protected]
Printed in the UK

I-1310 Spareparts Mastercopy 04012016

Uploaded by

Copyright:

Available Formats

I-1310 Spareparts Mastercopy 04012016

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

I-1310 Spareparts Mastercopy 04012016

Uploaded by

Copyright:

Available Formats

I-1310 | I-1310 - Impactor Crusher

Spare Parts Manual Reservedele

SPARE PARTS – CONTENTS

2. SPARE PARTS ENQUIRY……………………….................……………………...............................................

3. UNDERSTANDING YOUR MACHINE SERIAL NUMBER.……………………………....................................

4. PARTS SUPPORT - GOOD PRACTISE ADVICE……………………………..................................................

TEREX® reserves the right to change specification without prior notice.

2. SPARE PARTS ENQUIRY

3. UNDERSTANDING YOUR MACHINE SERIAL NUMBER

TRX 00694 A DG E B 9675-

MA Year Code Sequence Number

Year Code Month Code

4. PARTS SUPPORT - GOOD PRACTISE ADVICE

5. WHERE TO FIND YOUR TRACK IDENTIFICATION PLATE

Track Frame Skid Plate

6. WHERE TO FIND YOUR ENGINE SERIAL PLATE

7. FINDING THE SOFTWARE VERSION OF YOUR PDM AND PLC

PDM File:- V2050_PDMng_v00n_Bowl

Left Hand Side

Finlay Red - RAL 2002 (RGB 194/51/28)

Terex White - RAL 1013 (RGB 241/235/213)

Terex Grey - RAL 7024 (RGB 85/87/92)

Terex Black - RAL 9005 (RGB 0/0/0)

Terex Red - RAL 3020 (RGB 211/23/31)

Figure Description Page

02-01 CHASSIS ASM 3

02-02 WATER PUMP ASM (OPTION) 7

02-03 MAGNET ASM UPTO SERIAL NO. FJP570092 9

02-04 MAGNET ASM FROM SERIAL NO. FJP570093 11

03-01 TRACK ASM 13

03-02 PART LISTINGS FOR 883MKII/I-1310/J-1160 TEREX TRACKS 15

03-03 STRICKLAND TRACKS ASM 19

03-04 STRICKLAND TRACKS - INTERGRATED INTO GEARBOX 21

03-05 TRACKLINE TRACKS ASM 23

04-01 VGF FEEDER BOX ASM 27

04-02 VGF INCLINED ASM 29

05-05 POWERUNIT ASM FROM SERIAL NO. FJP570096 UPTO FJP580134 55

05-09 ENGINE COMPARTMENT FROM SERIAL NO. FJP580135 EXCLUDING 71

05-11 CONTROL BOX ASM 79

06-01 HYDRAULIC TANK ASM 81

07-01 FUEL TANK ASM 83

08-01 IMPACTOR ASM UPTO SERIAL NO. FJP580134 INCLUDING FJP580138 85

08-02 IMPACTOR ASM FROM SERIAL NO. FJP580135 EXCLUDING FJP580138 89

08-03 ROTOR ASM 93

08-04 IMPACT APRON ASM 95

08-05 SPINDEL SUSPENSION FOR FRONT IMPACT APRON 97

08-06 SPINDEL SUSPENSION FOR REAR IMPACT APRON 99

08-08 WEAR PLATES ASM 103

08-09 CRUSHER UNIT HYDRAULICS 107

08-10 GRINDING PATH (OPTION) 109

08-11 IMPACTOR MISCELLANEOUS 1 111

08-12 IMPACTOR MISCELLANEOUS 2 113

08-13 IMPACTOR MISCELLANEOUS 3 115

08-14 IMPACTOR MISCELLANEOUS 4 117

08-15 IMPACTOR MISCELLANEOUS 5 119

10-09 MA DIRT CONVEYOR ASM (OPTION)

DIRT CONVEYOR 1ST SECTION ASM (OPTION)

DIRT CONVEYOR 2ND SECTION ASM (OPTION)

10-10 DIRT CONVEYOR ASM (TELESCOPIC) (OPTION) 165