RAYMING PCB & ASSEMBLY

How to Choose Xilinx Artix 7 FPGA With Full Part Number List
Have you ever heard of the Xilinx Artix-7 FPGA board before?

The Xilinx Artix-7 is a highly flexible and powerful development board. It can
develop, prototype, and validate algorithms for use in embedded FPGAs. This is
perfect for software-defined radio (SDR) applications. It can operate at much higher
frequencies than other boards. This board is the result of the collaboration
between Xilinx and Andy Tudhope, a LambdaTera engineer.

For those who like to get technical about things, this board takes advantage of the
Xilinx Virtex-7 FPGA ICs. It can perform digital signal processing operations at
frequencies between 100MHz and 3GHz.

Table of Contents

Description

The board helps develop, prototyping, and validate algorithms for use in FPGAs. It
can function with maximum frequencies of up to 3GHz, which allows it to operate at
much higher frequencies than other boards. This board results from the collaboration
between Xilinx and Andy Tudhope, a LambdaTera designer. They focus on highly
successful designs. For instance, the Opteron-based server boards and highly
successful embedded development platforms as Development Board 2 (DB2) and
Development Board 3 (DB3). It enables designers such as RayMing PCB and
Assembly to use advanced data structures to develop efficient electronics.

Request xilinx Artix 7 FPGA Quote

Similarities

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

fpga xilinx artix 7

The Xilinx Artix-7 FPGA board uses a low-cost design that includes a Gigabit
Ethernet interface and dual USB 2.0 ports for fast communication. It also has a range
of USB-compatible FPGA features. For instance, analog-to-digital converters (ADCs)
and digital-to-analog converters (DACs).

The board makes use of the 32MB SDRAM memory that is useful in holding FPGA
bitstreams.

This board has three buttons that we can use to flash firmware or reset the system and
LEDs to provide feedback on all aspects of its operation.

The board also provides a USB serial port for debugging and diagnostic operations.

This board uses an external power supply to ensure that the board always has power
during development. It has a host interface to accommodate the latest JTAG
debuggers.

The board has two 16-bit digital-to-analog converters (DACs). They can simulate the
behavior of analog devices like microphones and speakers (also known as DACs). We
can connect them into an FPGA’s input/output blocks. It helps to simulate the
behavior of real-world devices like microphones and loudspeakers (also known as
DACs).

Request PCB Manufacturing & Assembly Quote

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Xilinx Artix-7 FPGA board features

The Xilinx Artix-7 FPGA board has a set of features that is sure to excite and interest
beginners and professionals alike.

Here are some of its key features:

1. Programmable System Integration

Programmable System Integration is a process used to integrate a

digital microcontroller with an FPGA. This board provides a platform for beginners
and professionals alike to learn about the integration process and how it works. The
Xilinx Artix-7 FPGA board comes with a comprehensive feature set tailored to
support the integration process.

2. Development Platform

The development platform created by the Xilinx Artix-7 FPGA board is ideal for
learning purposes. At the same time, it is flexible and powerful enough to work in
actual production processes. The development board contains an onboard Gigabit
Ethernet interface and dual USB 2.0 ports for fast communication. Thus, offering a
range of features that we can repurpose for use in different applications. The Xilinx
Artix-7 FPGA board comes with a set of features that we can use to develop and
evaluate arbitrary algorithms for embedded systems.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

3. SDR Technology

The Xilinx Artix-7 FPGA board uses this technology to facilitate signal processing
operations. FPGA device used in this board supports frequencies between 100MHz
and 3GHz. They operate at much higher frequencies than other boards. This
technology can carry out digital signal processing (DSP) operations. It makes it ideal
for software-defined radio (SDR) applications. This board is compatible with the
Zynq-7000 family of programmable systems. It makes it ideal for use with
high-performance embedded processing platforms. For instance,
the Zynq UltraScale+ MPSoC Development Kit (DEVKIT).

4. Online Resources

The Xilinx Artix-7 FPGA board is compatible with many online resources designed
for beginners and professionals alike. It also comes with an online resource center that
provides helpful tips and guidelines for different applications. Users of this board can
also contact the customer support team for help.

5. Onboard Flash Memory

The Xilinx Artix-7 FPGA board features 32MB of SDRAM memory. We can use it to
hold the bitstreams programmed into the FPGA device of the development board.

We can use the SDRAM memory to store FPGA bitstreams that we can transfer to
and from the FPGA device.

6. Onboard Resources

It features several onboard resources that support embedded system designers and
engineers. It comes with a USB serial port for debugging diagnostic operations
and LEDs. They provide feedback on all aspects of its operation. It also includes three
buttons that we can use to flash firmware or reset the development board, along with a
4-digit 7-segment display.

7. Secure Development Framework

The Xilinx Artix-7 FPGA board comes with a Secure Development Framework (SD
Framework). It reduces the amount of time spent on debugging because it provides an
easy-to-use graphical user interface for debugging operations. This also contains an

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

online help resource to access information about the board’s features and functions
easily.

8. Lithium-Ion Batteries

The Xilinx Artix-7 FPGA board has a set of Lithium-Ion batteries for power
distribution. Lithium-Ion battery used in this board can hold a charge for six months
to one year. It allows it to provide enough power for most applications during
development and prototyping phases.

9. Onboard Debugging and Testing

The Xilinx Artix-7 FPGA board comes with an onboard debug module that can
communicate with the FPGA device used in the board. This board features a host
interface that allows it to accommodate the latest JTAG debuggers.

The Xilinx Artix-7 FPGA board also supports a range of physical interfaces,
including USB 3.0 and Gigabit Ethernet for programming and communication
operations, as well as microSD and SATA interfaces.

Request xilinx Artix 7 FPGA Quote

Advantages of using the Xilinx Artix-7 FPGA board

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

artix 7 fpga

There are many advantages of using the Xilinx Artix-7 FPGA board, including the
following:

1. Flexible Design

The Xilinx Artix-7 FPGA board is flexible enough for different application
reprogramming. It comes with a comprehensive set of features that we can use to
develop systems or embedded solutions. This flexibility allows designers to develop
an application for their specific needs. The device also features different I/O options.
It gives users more freedom to determine how they can connect it–whether via USB,
Ethernet, or wireless connections.

2. System Integration

This board can facilitate system integration through its use of programmable
devices and I/O options. We can use it to develop and prototype embedded systems.
It allows users to gain hands-on experience in integration and development. This
feature makes it ideal for use in educational institutions. It allows students and
teachers alike to explore the area of system integration.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

3. Multiple Power Sources

The Xilinx Artix-7 FPGA board comes with a set of Lithium-Ion batteries. It allows
users to connect it to different power sources such as solar panels or wall sockets.
Users can also use the batteries alone instead of connecting the board to a power
source.

4. Upgradable Design

We can repurpose the Xilinx Artix-7 FPGA board for different applications. It helps
facilitate easy configuration and fast operation. Users can reprogram the FPGA device
and its onboard resources to fit different needs and requirements.

5. Integrated Development

The Xilinx Artix-7 FPGA board is compatible with several development systems. For
instance, the Zynq UltraScale+ MPSoC system and the Zynq UltraScale+ MPSoC
Development Kit (DEVKIT). These two boards support various applications. It makes
it ideal for users and developers to develop and test embedded systems.

6. Online Support

The Xilinx Artix-7 FPGA board comes with an online customer support team. They
provide free technical support for users encountering problems while using the board.
Users can also access the online library featured in the resource center of the Xilinx
Artix-7 FPGA board. It helps them with any difficulties or problems they may be
experiencing.

7. Preloaded Resources

The Xilinx Artix-7 FPGA board comes with a preloaded design that we can use after
purchasing it. So, users can start prototyping and testing their ideas without having to
configure or develop a customized design from scratch.

8. Compatible with the Zynq UltraScale+ MPSoC

This board is compatible with the Zynq UltraScale+ MPSoC system. It makes it ideal
for educational institutions to facilitate the development and testing of embedded

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

systems. The board also supports a wide range of other devices, making it a good
choice for various settings.

9. Innovative Design

The Xilinx Artix-7 FPGA board features an innovative design. It allows users to
develop embedded systems that adapt to changes and shifts in their environments. The
flexible design allows for reprogramming it without affecting its performance or
functionality.

10. Education-Friendly

The Xilinx Artix-7 FPGA board is education-friendly. Because we can use it in

classrooms and educational settings to help students realize the power of system
integration. It allows students to explore and learn about various applications. It
includes design, embedded systems, and digital signal processing.

11. Cost-effective

The Xilinx Artix-7 FPGA board has a reasonable price tag that makes it a good buy
for business and educational institutions. This makes it affordable for users from both
home and school. Because it saves them from paying for separate training or setup
costs once they have purchased the device.

Request PCB Manufacturing & Assembly Quote

Limitations of the Xilinx Artix-7 FPGA board

Xilinx-Artix-7-FPGA-ListDownload

The Xilinx Artix-7 FPGA board comes with several limitations, including the
following:

1. Independent Programming Support

The Xilinx Artix-7 FPGA board offers its users many advantages and advantages in
terms of performance and functionality. Still, the device does not support third-party
development tools and software packages. While this is not a problem for software
developers, it does mean that design engineers cannot accelerate the process of system
integration or application development by using third-party tools and software. The

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

device also does not have any debugging option; users will have to use their JTAG
port to debug applications.

2. Slow Programming Time

Another disadvantage of using the Xilinx Artix-7 FPGA board is that the device takes
a long time to program. So, users will need to spend more time developing programs
for their embedded systems. This makes it impossible for users to develop embedded
systems with customized configurations or applications.

3. Not Suitable for High-Performance Applications

The Xilinx Artix-7 FPGA board is unsuitable for high-performance applications. This
is because it is suitable for simple and basic system integration projects. However, the
device does not support complex or powerful features like wireless connectivity or
memory expansion.

4. Limited Resources

The Xilinx Artix-7 FPGA board comes with limited resources. It does not come with
any memory expansion options to allow users to expand the memory in their
embedded systems. This device also does not support CPU-intensive applications. It
is because it can only support basic processing.

5. Limit in Number of Devices that we can use

The Xilinx Artix-7 FPGA board can support up to 12 devices in the same system. It
makes it suitable for small or home settings for basic digital signal processing or
single sensor systems. However, this may not be sufficient for users to develop large
or complex applications. Especially ones that require more onboard computing
resources.

6. Limited Coverage Area on the Device

The Xilinx Artix-7 FPGA board has a smaller coverage area than other FPGA boards.
It means that it can only support small projects with limited hardware requirements.
While the device is ideal for small projects, it does not provide enough computing
power to meet complex applications requiring more than 12 devices to function
properly.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

7. Limited Memory

The Xilinx Artix-7 FPGA board only comes with a maximum of 1GB of
programmable memory. This means that users will have to spend most of their time
developing applications for their projects.

8. Not Compatible with Xilinx EDKs

The Xilinx Artix-7 FPGA board is not compatible with the Xilinx EDK software
development kits. It makes it difficult for users to use third-party tools and resources
to accelerate the process of system integration or application development without
paying for separate training or setups.

Request xilinx Artix 7 FPGA Quote

Applications of the Xilinx Artix-7 FPGA board

Xilinx Artix 7 FPGA Series Part Number List

The Xilinx Artix-7 FPGA board is ideal for use in a variety of settings, including the
following:

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

1. Educational Institutions

The Xilinx Artix-7 FPGA board is ideal for educational institutions. This is because it
has a wide range of applications that can help students realize the power of system
integration by exploring or learning about various applications. These include digital
signal processing, single sensor systems, and design. The device can also function as
an extension of an existing computer lab. It can help enhance students’ understanding
of integrating hardware and software devices.

2. Home Users

The Xilinx Artix-7 FPGA board is ideal for home users because it is a base for SBCs
and PC applications. The device also comes with a small form factor. It makes it ideal
for users who want to create or develop Heathkit-like projects. It is also ideal for
hobbyists who want to build off-the-shelf systems that function like the one they have
used in the past.

3. Industrial and Manufacturing Applications

The Xilinx Artix-7 FPGA board can support industrial and manufacturing
applications. This is because it can provide cost-effective solutions. It allows users to
increase the efficiency of digital signal processing applications. We can use the device
in applications requiring low latency, such as robotics and automation.

4. Medical Application

The Xilinx Artix-7 FPGA board is ideal for use in medical applications because it
offers a wide range of features that can be useful in designing cost-effective solutions
for various medical devices. These include digital signal processing, single sensor
systems, and design. The device can also function as an extension of an existing
computer lab, which can help enhance users’ understanding of integrating hardware
and software devices.

5. Robotics and Automation Applications

The Xilinx Artix-7 FPGA board is ideal for robotics and automation applications
because it is a base for SBCs and PC applications. It also comes with a small form
factor, making it ideal for users who want to create or develop Heathkit-like projects
or hobbyists who want to build off-the-shelf systems that function like the one they
have used in the past.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

6. Home Theater Applications

The Xilinx Artix-7 FPGA board is ideal for use in home theater applications. It also
comes with a small form factor, making it ideal for users who want to create or
develop Heathkit-like projects or hobbyists who want to build off-the-shelf systems
that function like the one they have used in the past.

7. Enterprise and Government Applications

The Xilinx Artix-7 FPGA board is ideal for enterprise and government applications
because it is a base for SBCs and PC applications. It also comes with a small form
factor, making it ideal for users who want to create or develop Heathkit-like projects
or hobbyists who want to build off-the-shelf systems that function like the one they
have used in the past.

Request PCB Manufacturing & Assembly Quote

Xilinx Artix-7 FPGA board examples

Common specifications for these boards include

 Made In Japan
 RoHS compliance
 User LED x2
 Tested all I/O
 Credit-Card-Size 3.386″x 2.126″ (86 x 54 mm)
 High-quality ten-layer PCB. (Immersion gold)
 Status LED x2 (Power, Done)
 User Switch x2 (Push x1, DIP x1bit)
 Power-on Reset IC for FPGA configuration
 Onboard clocks – 200 MHz (LVDS)
o 50 MHz (LVTTL)
 Power: 3.3 V single supply – Sequenced power supplies (Power on)

o 1.0 V/1.2 V/1.5 V/1.8 V/2.5 V onboard regulators

 JTAG port (7 pin socket)

 Configuration Device: MT25QL128ABA1ESE-0SIT (Micron, 128 Mbit)
 DDR3 SDRAM: MT41K64M16 (Micron, 1 Gbit)
 RocketIO Tx/Rx 2ch
 Separated Vcco input for each connector – IOD: External input from
CND Connector

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

o IOC: External input from CNC Connector

o IOB: External input from CNB Connector

o IOA: Fixed to 3.3V input from CNA Connector

 User I/O: 296 (HIROSE connectors, 80 pin x2, 100 pin x2) – IOD (CND
Connector): 84

o IOC (CNC Connector): 84

o IOB (CNB Connector): 64

o IOA (CNA Connector): 64

[XCM-211] Xilinx Artix-7 FFG1156 FPGA board

 XC7A200T–1FFG1156C: 296 Maximum user I/O pins (Board), 500

Maximum user I/O pins (Device), 10 CMT (MMCM x1 + PLL x1), 740 DSP
Slices, 13,140 Maximum Block RAM (kb), 2,888 Maximum Distributed RAM
(kb), 33,650 Slices, and 215,360 Logic Cells

[EDX-302] Xilinx Artix-7 USB-FPGA board

 XC7A100T-1FTG256C: 4,860 Total Block RAM (kb), 56 Maximum user I/O

pins (Board), 170 Maximum user I/O pins (Device), 1,188 Maximum
Distributed RAM (kb), 101,440 Logic Cells, and 15,850 Slices
 XC7A50T-1FTG256C: 2,700 Total Block RAM (kb), 56 Maximum user I/O
pins (Board), 170 Maximum user I/O pins (Device), 600 Maximum
Distributed RAM (kb), 52,160 Logic Cells, and 8,150 Slices
 XC7A75T-1FTG256C: 3,780 Total Block RAM (kb), 56 Maximum user I/O
pins (Board), 170 Maximum user I/O pins (Device), 892 Maximum
Distributed RAM (kb), 75,520 Logic Cells, and 11,800 Slices
 XC7A35T-1FTG256C: 1,800 Total Block RAM (kb), 56 Maximum user I/O
pins (Board), 170 Maximum user I/O pins (Device), 400 Maximum
Distributed RAM (kb), 33,280 Logic Cells, and 5,200 Slices
 XC7A15T-1FTG256C: 900 Total Block RAM (kb), 56 Maximum user I/O
pins (Board), 170 Maximum user I/O pins (Device), 200 Maximum
Distributed RAM (kb), 16,640 Logic Cells, and 2,600 Slices

[XCM-307] Xilinx Artix-7 FTG256 FPGA board

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

 XC7A100T-1FTG256C: 56 Maximum user I/O pins (Board), 170 Maximum

user I/O pins (Device), 6 CMT (MMCMx1+PLLx1), 240 DSP Slice, 4,860
Maximum Block RAM (kb), 1,188 Maximum Distributed RAM (kb), 101,440
Logic Cells, and 15,850 Slices
 XC7A35T-1FTG256C: 56 Maximum user I/O pins (Board), 170 Maximum
user I/O pins (Device), 5 CMT (MMCMx1+PLLx1), 90 DSP Slice, 1,800
Maximum Block RAM (kb), 400 Maximum Distributed RAM (kb), 33,280
Logic Cells, and 5,200 Slices

[XCM-208] Xilinx Artix-7 FBG676 FPGA board

 XC7A200T-1FBG676C: 296 Maximum user I/O pins (Board), 400 Maximum

user I/O pins (Device), 10 CMT (MMCM x1 + PLL x1), 740 DSP Slices,
13,140 Maximum Block RAM (kb), 2,888 Maximum Distributed RAM (kb),
33,650 Slices, and 215,360 Logic Cells

Request xilinx Artix 7 FPGA Quote

[XCM-114] Xilinx Artix-7 F484 FPGA board

 XC7A200T-1FGG484C: 10 CMT (MMCM x1 + PLL x1), 740 DSP Slices, 2

GTP Channel (Board), 4 GTP Channel (Device), 128 Maximum user I/O pins
(Board), 285 Maximum user I/O pins (Device), 13,140 Maximum Block RAM
(Kbits), 2,888 Maximum Distributed RAM (Kbits), 215,360 Logic Cells, and
33,650 Slices
 XC7A100T-1FBG484C: 6 CMT (MMCM x1 + PLL x1), 240 DSP Slices, 2
GTP Channel (Board), 4 GTP Channel (Device), 128 Maximum user I/O pins
(Board), 285 Maximum user I/O pins (Device), 4,860 Maximum Block RAM
(Kbits), 1,188 Maximum Distributed RAM (Kbits), 101,440 Logic Cells, and
15,850 Slices
 XC7A75T-1FBG484C: 6 CMT (MMCM x1 + PLL x1), 180 DSP Slices, 2
GTP Channel (Board), 4 GTP Channel (Device), 128 Maximum user I/O pins
(Board), 250Maximum user I/O pins (Device), 3,780 Maximum Block RAM
(Kbits), 892 Maximum Distributed RAM (Kbits), 75,520 Logic Cells, and
11,800 Slices
 XC7A50T-1FBG484C: 5 CMT (MMCM x1 + PLL x1), 120 DSP Slices, 2
GTP Channel (Board), 4 GTP Channel (Device), 128 Maximum user I/O pins
(Board), 250 Maximum user I/O pins (Device), 2,700 Maximum Block RAM
(Kbits), 600 Maximum Distributed RAM (Kbits), 52,160 Logic Cells, and
8,150 Slices
 XC7A35T-1FBG484C: 5 CMT (MMCM x1 + PLL x1), 90 DSP Slices, 2
GTP Channel (Board), 4 GTP Channel (Device), 128 Maximum user I/O pins
(Board), 250 Maximum user I/O pins (Device), 1,800 Maximum Block RAM

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

(Kbits), 400 Maximum Distributed RAM (Kbits), 33,280 Logic Cells, and
5,200 Slices

[XCM-023] Xilinx Artix-7 F484 FPGA board

 XC7A200T: 10 CMT (MMCM x1 + PLL x1), 740 DSP Slices, 4 GTP

Channel (Board), 4 GTP Channel (Device), 100 Maximum user I/O pins
(Board), 285 Maximum user I/O pins (Device), 13,140 Maximum Block RAM
(Kbits), 2,888 Maximum Distributed RAM (Kbits), 215,360 Logic Cells, and
33,650 Slices
 XC7A100T: 6 CMT (MMCM x1 + PLL x1), 240 DSP Slices, 4 GTP Channel
(Board), 4 GTP Channel (Device), 100 Maximum user I/O pins (Board), 285
Maximum user I/O pins (Device), 4,860 Maximum Block RAM (Kbits), 1,188
Maximum Distributed RAM (Kbits), 101,440 Logic Cells, and 15,850 Slices
 XC7A75T: 6 CMT (MMCM x1 + PLL x1), 180 DSP Slices, 4 GTP Channel
(Board), 4 GTP Channel (Device), 100 Maximum user I/O pins (Board), 250
Maximum user I/O pins (Device), 3,780 Maximum Block RAM (Kbits), 892
Maximum Distributed RAM (Kbits), 75,520 Logic Cells, and 11,800 Slices
 XC7A50T: 5 CMT (MMCM x1 + PLL x1), 120 DSP Slices, 4 GTP Channel
(Board), 4 GTP Channel (Device), 100 Maximum user I/O pins (Board), 250
Maximum user I/O pins (Device), 2,700 Maximum Block RAM (Kbits), 600
Maximum Distributed RAM (Kbits), 52,160 Logic Cells, and 8,150 Slices
 XC7A35T: 5 CMT (MMCM x1 + PLL x1), 90 DSP Slices, 4 GTP Channel
(Board), 4 GTP Channel (Device), 100 Maximum user I/O pins (Board), 250
Maximum user I/O pins (Device), 1,800 Maximum Block RAM (Kbits), 400
Maximum Distributed RAM (Kbits), 33,280 Logic Cells, and 5,200 Slices

[XCM-023W] Xilinx Artix-7 F484 FPGA board

 XC7A200T: 10 CMT (MMCM x1 + PLL x1), 740 DSP Slices, 100 Maximum
user I/O pins (Board), 285 Maximum user I/O pins (Device), 13,140
Maximum Block RAM (Kbits), 2,888 Maximum Distributed RAM (Kbits),
215,360 Logic Cells, and 33,650 Slices
 XC7A100T: 6 CMT (MMCM x1 + PLL x1), 240 DSP Slices, 100 Maximum
user I/O pins (Board), 285 Maximum user I/O pins (Device), 4,860 Maximum
Block RAM (Kbits), 1,188 Maximum Distributed RAM (Kbits), 101,440
Logic Cells, and 15,850 Slices
 XC7A75T: 6 CMT (MMCM x1 + PLL x1), 180 DSP Slices, 100 Maximum
user I/O pins (Board), 250 Maximum user I/O pins (Device), 3,780 Maximum
Block RAM (Kbits), 892 Maximum Distributed RAM (Kbits), 75,520 Logic
Cells, and 11,800 Slices
 XC7A50T: 5 CMT (MMCM x1 + PLL x1), 120 DSP Slices, 100 Maximum
user I/O pins (Board), 250 Maximum user I/O pins (Device), 2,700 Maximum

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Block RAM (Kbits), 600 Maximum Distributed RAM (Kbits), 52,160 Logic
Cells, and 8,150 Slices
 XC7A35T: 5 CMT (MMCM x1 + PLL x1), 90 DSP Slices, 100 Maximum
user I/O pins (Board), 250 Maximum user I/O pins (Device), 1,800 Maximum
Block RAM (Kbits), 400 Maximum Distributed RAM (Kbits), 33,280 Logic
Cells, and 5,200 Slices

[XCM-023Z] Xilinx Artix-7 F484 FPGA board

 XC7A200T: 10 CMT (MMCM x1 + PLL x1), 100 Maximum user I/O pins
(Board), 285 Maximum user I/O pins (Device), 13,140 Maximum Block RAM
(Kbits), 2,888 Maximum Distributed RAM (Kbits), 215,360 Logic Cells, and
33,650 Slices
 XC7A100T: 6 CMT (MMCM x1 + PLL x1), 100 Maximum user I/O pins
(Board), 285 Maximum user I/O pins (Device), 4,860 Maximum Block RAM
(Kbits), 1,188 Maximum Distributed RAM (Kbits), 101,440 Logic Cells, and
15,850 Slices
 XC7A75T: 6 CMT (MMCM x1 + PLL x1), 100 Maximum user I/O pins
(Board), 250 Maximum user I/O pins (Device), 3,780 Maximum Block RAM
(Kbits), 892 Maximum Distributed RAM (Kbits), 75,520 Logic Cells, and
11,800 Slices
 XC7A50T: 5 CMT (MMCM x1 + PLL x1), 100 Maximum user I/O pins
(Board), 250 Maximum user I/O pins (Device), 2,700 Maximum Block RAM
(Kbits), 600 Maximum Distributed RAM (Kbits), 52,160 Logic Cells, and
8,150 Slices
 XC7A35T: 5CMT (MMCM x1 + PLL x1), 100 Maximum user I/O pins
(Board), 250 Maximum user I/O pins (Device), 1,800 Maximum Block RAM
(Kbits), 400 Maximum Distributed RAM (Kbits), 33,280 Logic Cells, and
5,200 Slices

Conclusion

The Xilinx Artix-7 FPGA board is ideal for use in different application scenarios
suited to the device’s functionality. However, this does not mean users will be able to
use it for all situations. Users must stay informed about the capabilities of the device
to ensure they do not exceed the 1,000 Mbit/s bandwidth limit, which will leave them
with fewer options for expanding their computing resources.

Related Posts:

1. What Is Xilinx Artix-7 FPGA ?

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

2. Part Number list of QuickLogic PASIC 3 FPGA Family

3. Why Choose Xilinx XA7A25T-1CPG238Q

4. Full Introduction of QuickLogic EclipsePlus FPGA Family

https://www.raypcb.com/artix-7-fpga-board/

PCB Manufacturing & Assembly Services https://www.raypcb.com/