Cummins Series17qd
Cummins Series17qd
Cummins Series17qd
Without sound
shield 377 kg (830 lb) 1127 mm (44.4 in) 602 mm (23.7 in) 672 mm (26.5 in)
* Full load at 1 m, with optional Cummins Onan sound shield
Cummins®, Onan®, the "C" logo, Performance you rely on.™ and Quiet DieselTM are servicemarks, trademarks and/or registered trademarks of Cummins Inc. / Specifications subject to change
without notice / ©2007 Cummins Power Generation. All Rights Reserved.
A-1480d (2/08)
Standard features
• Advanced digital electronic control providing extensive • Freshwater cooling system with heat exchanger,
diagnostic capability expansion tank and coolant recovery system
• Shutdown with diagnostic indicator light for: high engine • Water cooled exhaust mixing elbow
coolant temperature, high exhaust temperature, low oil • Gear-driven raw water pump
pressure, over speed/voltage, starter overcrank, no raw • AC mainline circuit breaker
water flow, additional customer input and many more • Running time meter
• Start-run-stop switch with glow plug preheat and fuel • Air intake silencer
pump priming modes for easy starting; run light and • Captive focalized mounting systems with vibration
diagnostic indicator light isolators
• Start function has automatic glow plug preheat providing • Full flow lube oil filter
better, cleaner starting • Oil drain and hose extension
• Engine starter with automatic start disconnect • Electric fuel shut-off via electronic governing actuator
• Electronic governor allows the generator set to maintain • Fuel filter/water separator
isochronous frequency control and close voltage • Drip pan base capable of containing all generator set
regulation to provide quality power for digital appliances fluids
and computers • Bulk head type connections for ease of installation
• Switchable between 50/60 Hz include fuel in, fuel out, battery, raw water inlet, wet
• Single phase AC alternator with single or dual voltages, exhaust, generator set ground (vessel bond)
brushless • Single point lifting bracket for ease of installation
• Digital voltage regulator integral with control • Plug-in watertight connector for optional remote control
• 12 VDC electric system with battery charging, negative • Closed crankcase breather re-circulation to eliminate
ground engine room contamination
• Electric fuel transfer pump for priming and lift capability • Coolant overflow bottle to easily maintain coolant level
• DC control console mounted with isolation and DC • Fire extinguisher access port
protective circuit breakers • Factory load tested
• Five year Limited Warranty
Engine details
Design: 4-cycle, water-cooled diesel Raw Water Flow Rate:
Cylinders: 4 50 Hz: 26.5 L/min (7.0 Gal/min)
Bore: 83 mm (3.27 in) 60 Hz: 34.1 L/min (9.0 Gal/min)
Stroke: 92.4 mm (3.64 in) Starting System: Remote 3-wire, 12 V starting battery
Displacement: 1999 cm3 (122 in3) required, 70 Ah, 500 CCA; 24 V optional
Compression ratio: 22.8:1 Power (max): SAEJ1995
Max fuel lift: 1.22 m (4 ft) 50 Hz at 1500 RPM 19.9 kW (26.7 hp)
Lube Oil Capacity: 7.6 L (8 qt) 60 Hz at 1800 RPM 23.9 kW (32 hp)
Coolant Capacity: 7.6 L (8 qt) Fuel injection pump: Bosch PFR-M mini
Coolant Flow Rate: Combustion Chamber: Spherical, three vortex combustion
50 Hz: 37.9 L/min (10.0 Gal/min) system
60 Hz: 53.0 L/min (14.0 Gal/min) Max Raw Water Lift: 1.22 m (4 ft)
Typical fuel consumption
No. 2 diesel fuel, L/hr (Gal/hr) No load 1/4 load 1/2 load 3/4 load Full load
13.5 MDKBP 50Hz 1.1 (0.3) 1.9 (0.5) 2.7 (0.7) 3.6 (0.9) 4.8 (1.3)
17.0 MDKBP 60Hz 1.5 (0.4) 2.3 (0.6) 3.3 (0.9) 4.5 (1.2) 6.0 (1.6)
Alternator details
Design: Cummins Onan brushless, revolving field, 4-pole Insulation system: Class H per NEMA MG1-1.65 and BS
alternator; rigidly coupled to engine and permanently 5000
aligned
Generator set performance
Voltage regulator: Solid state, circuit board encapsulated
for corrosion protection Operating environment: Generator sets are durability
Exciter system: Brushless with 8-pole stator mounted in tested at maximum ambient air temperature: 50° C (122° F);
endbell; rotating rectifier assemblies are encapsulated for raw water temperature 37.8° C (100° F)
protection from adverse environments Frequency regulation: Isochronous
Stator: Skewed stator and 2/3 pitch windings minimize Random Frequency Variation: Will not exceed
field heating and voltage harmonics; resin-coated for +/-0.5% of its mean value for constant loads from no load
corrosion protection to full load
Rotor: Dynamically balanced assembly; direct-coupled to Voltage Regulation: No load to rated load +/-1%
engine by flexible drive discs; supported by pre-lubricated, Random Voltage Variation: Will not exceed +/-0.5% of
maintenance-free ball bearing its mean value for constant loads from no load to full load
Cooling: Direct drive centrifugal blower
Cummins®, Onan®, the "C" logo, Performance you rely on.™ and Quiet DieselTM are servicemarks, trademarks and/or registered trademarks of Cummins Inc. / Specifications subject to change
without notice / ©2007 Cummins Power Generation. All Rights Reserved.
A-1480d (2/08)
Basic dimensions
Note: This outline drawing is provided for general reference only and is not intended for design or installation. For more information see
Operation and Installation manuals or obtain drawing 500-4944 and wiring diagram from your distributor/dealer.
Options
• Cummins Onan Digital Display - graphical LCD set-mounted • Dry exhaust system (up or down orientation)
display for generator set operating parameters, diagnostics, • Sound shield housing
and pre-alarm indication in text format • Front power take-off (PTO) for full engine output with
• SAE J-1939 CAN data link for monitoring generator set status clutch, flexible coupling and SAE B flange pump
and diagnostics for engine and alternator mounting for 2 and 4 bolt mounting; (12 or 24 VDC clutch)
• SmartCraft NetworkedTM data link for monitoring generator • Engine end interface
set status and diagnostics for engine and alternator (display connections
available through Cummins MerCruiser Diesel) • Engine end wet exhaust
• Low coolant level shutdown outlet
• Keel cooling with wet exhaust • Remote shut down harness
• Keel cooling with dry exhaust for fire extinguisher
• 12 VDC electric system with battery charging, isolated DC connection
• 3 phase, 125° C broad range alternator with a variety of Standard model without sound shield
voltages
• 24 VDC electric system with battery charging, negative
ground or isolated DC
Accessories
• Cummins Onan Digital Display - • Siphon break kit
graphical LCD remote display for • Wet exhaust hose and stainless steel elbow
generator set operating • Battery
parameters, diagnostics, and • Bulk head battery terminal boots
pre-alarm indication in text format • Low coolant level shut down switch
• Basic remote panel with • Front or rear exhaust outlet kit
start/stop switch with run (green) Cummins Onan Digital Display • Dry exhaust fitting
and control status (amber) lamps • Marine mufflers, water separator, and resonator dual
• Remote start/stop switch with dual lamps and mating silencers
harness for panel installation • Front power take-off (PTO) for full engine output with
• 12 or 24 volt isolated ground conversion kit, no battery clutch, flexible coupling and SAE B flange pump
charging mounting for 2 and 4 bolt mounting; (12 or 24 VDC
• Y adapter harness for dual remote stations clutch), additional sound shield front
• Remote station harness pigtail panel or belt guard is required
• Remote panel wire harness - 15 ft, 25 ft, 45 ft, 75 ft, • Sound shield housing
100 ft or 150 ft • Cruise kit - maintenance parts - fuel
• Line circuit breakers for field conversion of frequency or filters, oil filters, raw water pump
AC voltage output impellers, zinc pencils alternator
• Remote fuel filter/water separator assembly belt and plastic container Cummins Onan Cruise Kit
• Fuel supply and return hose barb connectors • Keel cooling conversion for wet or
• Dry exhaust muffler, flexible exhaust stainless steel tube dry exhaust
assembly
Cummins®, Onan®, the "C" logo, Performance you rely on.™ and Quiet DieselTM are servicemarks, trademarks and/or registered trademarks of Cummins Inc. / Specifications subject to change
without notice / ©2007 Cummins Power Generation. All Rights Reserved.
A-1480d (2/08)
Standards and testing After sale support
National Marine Manufacturers Association (NMMA) Largest distributor/dealer support network
members produce every conceivable product used by Cummins Onan generator sets are supported by the largest
recreational boaters. NMMA provides a wide variety of and best trained worldwide certified distributor/dealer
programs and services including technical expertise, network in the industry. This network of knowledgeable
standards monitoring, government relations advocation Cummins Onan distributor/dealers will help you select and
and industry statistics. install the right generator set and accessories to meet the
The American Boat and Yacht Council (ABYC) develops requirements of your specific application. This same
standards and recommended practices for designing, network offers a complete selection of commonly used
constructing, equipping and maintaining small pleasure generator set maintenance parts, accessories and products
and commercial craft. plus manuals and specification sheets. Plus, they can
answer your questions regarding proper operation,
This generator set was designed and manufactured in
maintenance schedules and more.
facilities certified to ISO 9001.
Manuals: Operation, installation and parts manuals ship
Lloyd’s Register states that Cummins Onan Marine
with the generator set. To obtain additional copies or other
Generators have been successfully tested in accordance
manuals for this model, see your Cummins Onan
with the relevant requirements of the Lloyd’s Register Type
distributor/dealer and request the following manual
Approval System for Marine, offshore and industrial
numbers: Operation (981-0181), Installation (981-0648),
applications.
Parts (981-0288), Service (981-0543).
To easily locate the nearest Cummins Onan
distributor/dealer in your area, or for more information,
contact us at 1-800-888-6626 (or 763-574-5000), or visit
Warranty policy www.cumminsonan.com.
! WARNING:
Back feed to a utility system can cause
electrocution and/or property damage.
Do not connect to any building electrical
except through an approved device or
after building main breaker is open.
Cummins®, Onan®, the "C" logo, Performance you rely on.™ and Quiet DieselTM are servicemarks, trademarks and/or registered trademarks of Cummins Inc. / Specifications subject to change
without notice / ©2007 Cummins Power Generation. All Rights Reserved.
A-1480d (2/08)