Chemiphase OilIield & ReIinery Chemical Products
Application Product Product Chemical Treatment Typical Comments
Description Number Description Description Regime Dosage Level ppm
Well Well Dewaxer ParaIIin Remover Anionic SurIactants Static 1 part to 5/10 H2O
Cleaning
Polymeric Alkoxylates Dynamic Slug 500-2500 litre
CP-48 Deposit Remover Anionic SurIactants Static 1 part to 5/20 H2O
CP-49 ParaIIin Remover Anionic SurIactants Static Fill the tubing with
Concentrated CP-49
Dynamic Slug 500-2500 litre
CP-60 Enviromental SurIactant Blend Static 1 part to 5/20 H2O
Deposit Remover Dynamic Slug 1500-2500 litre
Well Wash CP-72 Treatment oI high Organic surIactants & Slug 1:3 with a suitable Gentle squeeze
paraIIinic emulsions Alkoxylates carrier solvent (diesel) into Iormation
Organic pH CP-76 Reduces ph to 4.8 - 5.5 Organic acid Slug 500 - 5000 ppm dilute inject slowly into
Adjuster (Use with CP-72) with carrier solvent Iormation
Biocide CP-1975 Broad Spectuum Tetrakishydroxymethyl Minimum 10-250ppm Environmentally
Biocide Ior Bacteria Salt 0.2-3 hours Approved Product
CP-1976 Broad Spectuum Ethylene bis Minimum 50-220ppm
Biocide Ior Bacteria Dithiocarbonate Salt 30 mins
& Algac Contact
CP-1978 Aerobic & Anaerobic Glutarldehyde Minimum 60-200 ppm pH range
Bactericide blend 0.5-6 hours 5.5 - 9.0
Contact
CP-1979 Aerobic & Anaerobic Hypochlorite & Minimum 1 ppm oI Iree wide pH
Bactericide SurIactant blend 0.5 -2 hours Chlorine present range
CP-1979T Contact
H2S CP-1990 H2S Scavenger Blend oI Stabilised Continuous 7 - 18 Ltrs per Kg Strong
Scavenger Aldehydes or Slug oI removed H2S Oxidiser
Chemiphase OilIield & ReIinery Chemical Products
CP-1991 H2S Scavenger Blend oI Stabilised Continuous 2-20 Ltrs per Kg Slightly
Chlorite ions or Slug oI removed H2S Corrosive
CP-1991E H2S Scavenger Blend oI Stabilised Continuous 2-25 ltrs per Kg Slightly
Chlorite ions or Slug oI removed H2S Corrosive
CP-1992 H2S Scavenger Blend oI stabilised Continous 5-20 Ltrs per Kg Slightly
Bisulphite ions or slug oI removal H2S Corrosive
O2 CP-1995 O2 Scavenger Aqueous solution oI Continuous a) Deaerated water
Scavenger Ammonium Bisulphite or Slug 4 - 20 ppm
b) Open water inject
1 ppm dissolved O2
c) Hydrostatic tests
20 ppm per 1 ppm
dissolved O2
Demulsifier CP-2143 DemulsiIier & Alkoxylates Continuous 25 - 200 ppm Good Corrosion
Corrosion Inhib or Slug Protection
CP-2144 Crude Oil Blend oI Polymeric Continuous 10 - 200 ppm Good Deoiling
DemulsiIier Alkoxylates or Slug Properties
CP-2145D Crude Oil Blend oI Polymeric Continuous 5 - 200 ppm Cost EIIective
DemulsiIier Alkoxylates or Slug
CP-2147D Crude Oil Blend oI Polymeric Continuous 5 - 200 ppm Good Deoiling
DemulsiIier Alkoxylates or Slug Properties
CP-2148 Crude Oil Blend oI Polymeric Continuous 12 - 150 ppm Strong
DemulsiIier Alkoxylates or Slug DemulsiIier
CP-2149 Crude oI Blend oI Polymeric Continuous 12 - 150 ppm
DemulsiIier Alkoxylates or Slug
Deoiler CP-2802 Deoiler Blend oI Cationic Continuous 2 - 40 ppm Primary
High Mwt Polymers or Slug Coagulant
CP-2806 Deoiler & Blend oI Strong Cationic Continuous a) Deoiler Good deoiler
Chemiphase OilIield & ReIinery Chemical Products
Reverse DemulsiIier High Mwt Polymers or Slug 2 - 75 ppm
b) Reverse DemulsiIier Treats V.stable
20 - 1000 ppm emulsions
CP-2807 Deoiler Continuous 2 - 60 ppm Treats V. stable
or Slug emulsions
CP-2808 Deoiler & Continuous a) Deoiler Good Deoiler
Reverse DemulsiIier or Slug 2 - 100 ppm
b) Reverse DemulsiIier
10 - 1000 ppm
CP-2089 Reverse DemulsiIier Continuous 5 - 1500 ppm
or Slug
Corrosion CP-3161 Corrosion & Fatty acids, Fatty amines Continuous 25 - 300 ppm Best Ior CO2
Inhibitor & Neutraliser & a volatile amine Higher doses required protection
Neutraliser (Ior oilIield & pipeline) iI alcohols present (increases pH)
CP-3162 Corrosion & Blend oI Polymeric Continuous 10 - 500 ppm Good Ior CO2 &
Neutraliser Alkoxylates H2S protection
(Ior oilIied & pipeline) (increases pH)
CP-3163 Corrosion & Fatty acids, Fatty amines Continuous 5 - 250 ppm Good Iilmer &
Neutraliser & Monoethanolamine strong neutraliser
(Ior oilIield & pipeline)
CP-9308 Scale/Corrosion/ Amino-tris, Phosphonium Continuous 10 - 500 ppm Good Ior CO2 &
Biocide Programme Salt & Carboxilic Acid H2S protection
(Due To SRB'S)
Corrosion CP-3166 General Corrosion Blend oI Polymeric Continuous 25 - 500 ppm Good Ior CO2 &
Inhibitor Inhibitor Alkoxylates H2S protection
CP-3175 Well Protector while Continous 500 - 5000 ppm As Ior CP3166
Drilling
Corrosion & CP-3167 Corrosion & Quaternary ammonium Contiounous 5 - 100 ppm Good CO2 &
Chemiphase OilIield & ReIinery Chemical Products
Biocide Biocide compounds or Slug H2S - excellent
kill action - SRB
Corrosion & CP-3168 Suitable Ior pipeline Bisulphite & Continuous 10 parts CP-3168 Higher levels are
Biocide & Hydrostatic testing Fatty quaternary or Slug 1000 parts oI test Iluid required iI dissolved
Oxygen ammonium compounds O2 level is high
Well CP-4504 Organic Blend oI Anionic & Continuous 25- 1000 ppm optimum results
Stimulation Deposit remover Nonionic surIactants or Slug squeeze treatment
Treatment Hydrocarbon based
CP-4506 Organic Blend oI anionic & Continuous 50 - 1000 ppm Squeeze treatment
Deposit Remover Nonionic surIactants or Slug
Hydrocarbon based
Well Wax CP-4806 Wax inhibitor Blend oI Continuous 50 - 500 ppm Good dehydrating
Inhibitor nonionic surIactants properties
CP-4806B Wax Dispersant Alkyl Phenol, Ethoxylate, Continuous 50 - 1000 ppm Good cleaning
Xylene Solution or Slug properties
CP-4807 Wax Inhibitor Blend oI Continuous 50 - 1000 ppm Good cleaning
nonionic surIactants properties
Paraffin CP-4808 ParaIIin dispersant Blend oI Continuous 50 - 500 ppm Clean lines beIore
Dispersant surIactants with Well Wash
CP-4809 ParaIIin dispersant Blend oI Continuous 50 - 1200 ppm Clean lines beIore
surIactants with Well Wash
CP-48, 60 or 72
Wax CP-4822 Wax Inhibitor Several SurIactants Continuous 50 - 500 ppm
Inhibitor in Aromatic Solvent
Scale CP-4813 Scale Buster Amino-tris, Alkyl Phenol, Continuous 50-250 ppm
Busters Ethoxylates or slug slug up to 1
CP-4815 Scale Buster Amino-tris, Polyacrilic Continuous 50-400 ppm
Homopolymer & or slug slug up to 1.25
Chemiphase OilIield & ReIinery Chemical Products
Organic Acids
CP-4816 Scale Buster Amino-tris, Polyacrilic Continuous 50-250 ppm
(Dispersant) Acid Polymers or slug slug up to 1
CP-4818 Scale Buster Amino-tris, Polyacrilic 50-350 ppm
Homopolymer & slug up to 1.3
Organic Acids
Wax CP-4850 Wax crystal Blend oI pour Continuous 50 - 500 ppm Good crystal
Modifier modiIier point additives dispersant
CP-4851 wax crystal Blend oI pour Continuous 50 - 1000 ppm Good crystal
modiIier point additives dispersant
Pour Point CP-4901 Pour Point Copolymers in an Continuous To be Tested
Additive Depressant Aromatic Solvent
CP-4904 Pour Point Polymers in an Continuous To be tested
Depressant Aromatic Solvent
CP-4905 Pour Point Polymers in an Continuous To be Tested
Depressant Aromatic Solvent
CP-4908 Pour Point Polymers in an Continuous To be Tested
Depressant Aromatic Solvent
CP-4909 Pour Point Polymers in an Continuous To be Tested
Depressant Aromatic Solvent
CP-4915 Pour Point Polymers in an Continuous To be Tested
Depressant Aromatic Solvent
Aquabloc CP-4950 Reduces well Cationic medium well 5000 - 10,000 ppm Reduces water cut
water cut Mwt polymer addition by 50 - 80
Aquabloc CP-4952 Reduces well Anionic medium well 5000 - 15,000 ppm Reduces water cut
water cut Mwt polymer addition by 50 - 80
Aquabloc CP-4955 Reduces well Nonionic medium well 5000 - 15,000 ppm Reduces water cut
water cut Mwt polymer addition by 50 - 80
Chemiphase OilIield & ReIinery Chemical Products
Aquabloc CP-4970 Reduces well Cationic cross linked well 5000 - 10,000 ppm Reduces water cut
water cut polymer addition by 50 - 80
Aquabloc CP-4974 Reduces well Anionic cross linked well 5000 - 10, 000 ppm Reduces water cut
water cut polymer addition by 50 - 80
Antifoam CP-5007 DeIoamer Blended surIactants Slug 0.2 - 6 litre per M3 EIIective over
Drilling Ior Iresh & salt water in mineral oil periods oI time
Fluids based drilling Iluids
Antifoam CP-5008 DeIoamer Blend oI silicone - based Continuous 5 - 50 ppm Very economical
Crude Oil additives in an aliphatic or Slug Avoids carry over in
solvent gas/oil seperators
Antifoam CP-5009 DeIoamer Blend oI silicone - based Continuous 10 - 50 ppm
Crude oil (use in crude heating additives in an aliphatic or Slug
applications)) solvent
Scale CP-7620 Inhibits carbonate & Polyacrylate & Continuous 25 - 1000 ppm Scaling potential
Inhibitor Sulphate scales Diethylenetriamine PMPA to be determined
Disperses Iron scale Ior treatment
and general debry regime
CP-7621 Inhibits carbonate & Blend oI water Continuous 25 - 2000 ppm Scaling potential
sulphate scales soluble polymers to be determined
Disperses Iron scale Ior treatment
and general debry regime
