0% found this document useful (0 votes)
38 views3 pages

Simplex Mode

Simplex mode allows only one-way communication, with one device transmitting while the other can only receive. Half-duplex mode enables bidirectional communication but not simultaneously, as devices take turns transmitting and receiving. Full-duplex mode permits both devices to transmit and receive simultaneously by using separate channels for each direction or dividing the channel capacity between the two directions.

Uploaded by

rohit27305
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
38 views3 pages

Simplex Mode

Simplex mode allows only one-way communication, with one device transmitting while the other can only receive. Half-duplex mode enables bidirectional communication but not simultaneously, as devices take turns transmitting and receiving. Full-duplex mode permits both devices to transmit and receive simultaneously by using separate channels for each direction or dividing the channel capacity between the two directions.

Uploaded by

rohit27305
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

1.

Simplex Mode –
In Simplex mode, the communication is unidirectional, as on a one-way
street. Only one of the two devices on a link can transmit, the other can
only receive. The simplex mode can use the entire capacity of the
channel to send data in one direction.
Example: Keyboard and traditional monitors. The keyboard can only
introduce input, the monitor can only give the output.

Advantages:
 Simplex mode is the easiest and most reliable mode of communication.
 It is the most cost-effective mode, as it only requires one communication
channel.
 There is no need for coordination between the transmitting and receiving
devices, which simplifies the communication process.
 Simplex mode is particularly useful in situations where feedback or response
is not required, such as broadcasting or surveillance.

Disadvantages:
 Only one-way communication is possible.
 There is no way to verify if the transmitted data has been received correctly.
 Simplex mode is not suitable for applications that require bidirectional
communication.
2. Half-Duplex Mode –
In half-duplex mode, each station can both transmit and receive, but not at the
same time. When one device is sending, the other can only receive, and vice
versa. The half-duplex mode is used in cases where there is no need for
communication in both directions at the same time. The entire capacity of the
channel can be utilized for each direction.
Example: Walkie-talkie in which message is sent one at a time and messages
are sent in both directions.

Channel capacity=Bandwidth * Propagation Delay

Advantages:
 Half-duplex mode allows for bidirectional communication, which is useful in
situations where devices need to send and receive data.
 It is a more efficient mode of communication than simplex mode, as the
channel can be used for both transmission and reception.
 Half-duplex mode is less expensive than full-duplex mode, as it only requires
one communication channel.

Disadvantages:
 Half-duplex mode is less reliable than Full-Duplex mode, as both devices
cannot transmit at the same time.
 There is a delay between transmission and reception, which can cause
problems in some applications.
 There is a need for coordination between the transmitting and receiving
devices, which can complicate the communication process.
3. Full-Duplex Mode –
In full-duplex mode, both stations can transmit and receive simultaneously. In
full_duplex mode, signals going in one direction share the capacity of the link
with signals going in another direction, this sharing can occur in two ways:

 Either the link must contain two physically separate transmission paths, one
for sending and the other for receiving.
 Or the capacity is divided between signals traveling in both directions.

Full-duplex mode is used when communication in both directions is required all


the time. The capacity of the channel, however, must be divided between the
two directions.
Example: Telephone Network in which there is communication between two
persons by a telephone line, through which both can talk and listen at the same
time.
Channel Capacity=2* Bandwidth*propagation Delay

Advantages:
 Full-duplex mode allows for simultaneous bidirectional communication,
which is ideal for real-time applications such as video conferencing or online
gaming.
 It is the most efficient mode of communication, as both devices can transmit
and receive data simultaneously.
 Full-duplex mode provides a high level of reliability and accuracy, as there is
no need for error correction mechanisms.

Disadvantages:
 Full-duplex mode is the most expensive mode, as it requires two
communication channels.
 It is more complex than simplex and half-duplex modes, as it requires two
physically separate transmission paths or a division of channel capacity.
 Full-duplex mode may not be suitable for all applications, as it requires a
high level of bandwidth and may not be necessary for some types of
communication
2.

You might also like