The 2023 Kia Sorento.

Vehicle Feature Tips

Many of the Tips presented below are covered in greater detail in the
Owner’s Manual, Multimedia System Manuals, Features and Functions
Guide, and Quick-Start Guide hangtag supplied with your new vehicle.

Voice Recognition1 and Bluetooth®2

Using Voice Recognition • If you experience any issues with auto-connection,
Improve Bluetooth® Voice Recognition (VR) performance try the following:
by making a few simple changes to your phone contacts: • Reboot your phone (turn the phone off and then on).
• Use full names (first and last names) vs. short or single- • Update the phone operating system to the most recently
syllable names (“John Smith” vs. “Dad,” “Smith Residence” released version.
vs. “Home”). • Delete the phone from the list of Bluetooth® devices
• Avoid using special characters, emojis, and hyphenated on the infotainment system display1 and delete Kia
names (@, &, #, /, -, *, +, etc.). device from the list of Bluetooth® devices on your
• Avoid using acronyms (“Emergency” vs. “ICE” or “In phone, and re-pair.
Case of Emergency”) or words with all capital letters. • Ensure the phone has the Bluetooth® feature activated.
• Spell words completely; system will not recognize • If some contacts are not downloading to the infotainment
abbreviations (“Doctor Smith” vs. “Dr. Smith”). system display, check to confirm that the contact has
• Always wait for the beep before speaking any commands. been entered correctly and that it has been stored under
• When using VR to place a call, speak in a natural, moderate the categories (HOME, MOBILE, WORK, iPhone®3) that are
tone, with clear pronunciation. The system may have trouble supported by the infotainment system display. Some contact
recognizing commands if you speak too softly or too loudly. categories (MAIN, PAGER, OTHER) may not be supported. If
the number of contacts exceeds the maximum number allowed
• Open windows, sunroof, weather (wind/rain), or an A/C fan on the infotainment system display, contacts will be partially
operating at higher speeds can interfere with VR accuracy. downloaded. Ensure that only the “phone contact list” is
• Your VR system may have difficulty understanding some selected for contact download on your phone (not social media
accents or uncommon names. or email contact lists as these contacts may not download to
• Press the talk button and say “Help” to get a list of available the infotainment system display).
commands. • Phone operating systems change frequently and some phones
Pairing or Connecting Your Phone with Bluetooth® may have varying compatibility levels with the Bluetooth®
system. For any questions regarding the features of your
• Select “Device Connections” in the infotainment display
vehicle, please contact your preferred Kia dealer or contact
or “Call” button on the steering wheel to begin the pairing
Kia Consumer Assistance at 1-800-333-4542.
process if no phone has previously been paired.
• During the pairing process, please make sure you accept Other Bluetooth® Tips
all requests for phonebook download and future auto- • Bluetooth® reception is affected by carrier coverage and is
connection on your phone. dependent on the phone.
• To pair a second phone or subsequent phones, reference • If streaming audio through Bluetooth® from a device, ensure
the manuals and guides supplied with your Sorento as steps the listening volume on the device is turned up.
vary by infotainment system.

Smartphone Connectivity1
Apple CarPlay®3
Your vehicle offers you effortless command of your compatible iPhone® when you connect through Apple CarPlay®
on your infotainment system display. This will enable you to make calls, send hands-free texts, access many of your
favorite apps and music, and get navigation help with Siri® voice control.
To connect Apple CarPlay, visit https://youtu.be/98TNWMOQfdU
Android AutoTM4
Your vehicle allows you to connect to your compatible AndroidTM phone via Android AutoTM on your infotainment
system display. Through this feature, you can access music, your phone’s dialer, navigation help, and more with an
intuitive interface and voice commands. You can even access your phone through your steering wheel controls.
To connect Android Auto, visit https://youtu.be/sTR4KotSOzU

For select models equipped with wireless Apple CarPlay and Android Auto, visit https://youtu.be/oUXXuAZAOEI

Kia Access App*5

• Your cellphone and your vehicle have to be connected to a cellular network with a good wireless signal strength in
order to use Kia Connect (formerly UVO link). If these conditions are not met, remote commands may not execute
or may take longer to execute.
• To use Remote Start or Remote Start with Climate Control feature, all doors, hood and trunk/liftgate must be
closed and locked. Remote Start or Remote Start with Climate Control feature will operate for about 10 minutes.6
• The quickest way to obtain an accurate vehicle status is by pressing the refresh icon on your app or customer
web portal.
• Activate Remote Start or Remote Start with Climate Control feature a few minutes before you plan to get into the
vehicle. This will allow vehicle interior to reach a desired temperature.
• In order to preserve vehicle battery, Kia Connect will not work seven days after the ignition was last turned on.
You will need to re-start your vehicle with a key fob in order to use Kia Connect again.

Feature Videos
To view a video on your mobile device, snap this QR Code or visit the listed website:
https://www.youtube.com/KiaFeatureVideos
 Power-Folding Outside Mirrors*
A Toggle the L or R buttons to select the mirror to adjust.

B Press button arrows left/right or up/down to adjust mirror position.

C
C Toggle button left/right to unfold/fold the outside rearview mirrors.

A L R A Toggle button to center to automatically fold/unfold mirrors when:

• The Smart Key* Lock/Unlock buttons are pressed.

• The door outside handle button* is pressed.

B
Quick Tip:
The mirrors will automatically unfold when the Smart Key* is within close proximity to the vehicle.
Reminders:
• When the mirror button A is in the center, press the Lock button on the Smart Key to
automatically fold the mirrors.
• To lock the mirrors from being moved by the arrow toggles, make sure that the toggle switch
is in the neutral (center) position.

Accessory Mode with Smart Key*

With standard key vehicles, you can turn the key to the Accessory mode and utilize the electronic
accessories without starting the vehicle. This is still possible with Smart Key-equipped vehicles.
To do this, enter the vehicle with the Smart Key and push the ENGINE START/STOP button one
time without depressing the brake pedal. This will put the vehicle in Accessory mode and ACC
will illuminate in AMBER.
• If the ENGINE START/STOP button is in the ACC position for more than 1 hour, the button
is turned off automatically to help prevent battery discharge. If the Smart Key battery is weak
or not working properly, hold the Smart Key fob up to the Engine Start/Stop button (with the
Lock button side closest), and press to start the engine.

Rear Liftgate Operation7

Manual Liftgate:
Remote/Smart Key* liftgate button ONLY UNLOCKS the liftgate.
With a Smart Key, simply approach the liftgate to unlock, then raise the hatch manually. With
a mechanical key, press and hold the Liftgate button A to unlock, then manually open.
Power Liftgate*:
Remote/Smart Key liftgate button opens and closes the liftgate.

HOLD A For your convenience, the liftgate opening height is adjustable. The liftgate speed can also be
adjusted in the LCD Instrument Cluster.
To program the opening height, perform the following:
• Open liftgate and manually position it to your preferred opening height.
• Depress and hold the close button on the liftgate for 3 seconds or more.
• The system will beep 2 times when the programming is complete.
If you unlocked your vehicle or opened the rear tailgate by pressing the unlock button on your
Remote/Smart Key, be sure to re-lock your vehicle using the lock button on the Remote/Smart Key
before walking away. Please note — All doors must be locked for the liftgate to lock automatically
after it is opened then closed.

Driver Attention Warning (DAW)8

A DAW is designed to alert the driver if it detects inattentive driving practices and, in certain
&58,6(

(Buttons located situations, can give a warning signal to take a break from driving.
on right side of
To enable/disable DAW: With the ignition on, press the Mode button A on the steering wheel
2.
steering wheel)

and go to User Settings in the Instrument Cluster. Then go to Driver Assistance and select Driver
Attention Warning. Set DAW to Normal Sensitivity, High Sensitivity or Off.
ntion Attention
Level Level Consider takingAttention Attention Level
a break Level
If DAW is activated, the DAW information will appear on the Instrument Cluster display B when
LOW HIGH HIGH LOW
B LOW
you select the Assist mode.
me 05:27
Level Time 05:27 Level Time 05:27
Level Time 05:27

Wireless Smartphone Charging System*9

Charge a compatible smartphone wirelessly by placing it on the tray B at the front of the console,
A
near the Multimedia USB ports and the charging indicator, while the ignition is on.
1. Enable Wireless Charging in the User Settings.
B 2. Slide open cover A . Place the smartphone on the center of the charging pad B .
3. Indicator light C may change to AMBER once wireless charging begins.
4. Once charging is complete, the AMBER light may change to GREEN.
Notes: Requires QI enabled device or QI enabled case.
For wireless charging to occur, all doors (excluding the rear hatch) must be closed and the
C
Smart Key Fob must be detected inside the vehicle.

Windshield Defogging
CENTER
PANEL

１ 2
Windshield fogging is caused by moisture in the air condensing on the cold glass. The following
practices can help reduce window fogging:
0 3
MAX
A/C
4
A
B
• Keeping the inside of the glass as clean as possible.
• Utilizing the Defrost Mode A activates the A/C and opens Fresh Air Vent.
A/C REAR

• Adjusting the Temperature Control B to hot.

Seat Warmers / Ventilated Seats*10

• Press button once for high setting. Up for heat, down for ventilation (3 LEDs lit).
• Press button twice for medium setting. Up for heat, down for ventilation (2 LEDs lit).
• Press button 3 times for low setting. Up for heat, down for ventilation (1 LED lit).
And once more to turn OFF.
With the seat warmer switch in the ON position, the heating system in the seat turns
OFF or ON automatically depending on the seat temperature.

Intelligent Speed Limit Assist / Manual Speed Limit Assist (ISLA/MSLA)11

ISLA is designed to use the information from the posted speed limit and the navigation system to inform the driver of the speed limit.
MSLA monitors the vehicle speed and warns the driver when the vehicle surpasses the preset speed limit. A warning indicator will blink
on the Instrument Cluster and a warning alert will sound until the vehicle speed returns to or is below the preset speed limit.
For more information, please see the Features & Functions Guide for operation.
 Blind-Spot Collision-Avoidance Assist (BCA)*12
The BCA system uses radar sensors in the rear bumper to help monitor and warn the driver in
certain situations if it detects an approaching vehicle in the driver’s blind spot area.
A CRUISE
To turn BCA on, go to the User Settings menu in the Instrument Cluster or touch screen,*1 press the
Mode button A on the steering wheel when the vehicle is at a standstill, gear shift into Park, and
B OK with the ignition switch or the Engine Start/Stop button* in the ON position, select User Settings.
Press the Move (OK) button B up/down and select Driver Assistance, Blind-Spot Safety, and then
press the OK button B .
To set the initial warning activation time, go to User Settings > Driver Assistance > Warning Time,
and press the OK button B . Select the Early/Normal or the Late option.
1st-stage alert: When another vehicle is detected within the BCA system warning boundary,
an AMBER indicator will illuminate on the outside rearview mirrors.
2nd-stage alert: When 1st-stage alert is on and the driver activates a turn signal, a flashing
AMBER indicator will illuminate on the outside rearview mirrors and the system will sound an alert.
Note: Alert noise can be adjusted in the Instrument Cluster or 10.25" touch screen.*1

Lane Keeping Assist (LKA)12 / Lane Departure Warning (LDW)12

LKA is designed to detect the lane markers on the road with a front view camera on the
windshield, and may assist the driver’s steering to potentially help keep the vehicle in
HOLD
A
the lane. When turned on, the Instrument Cluster indicator will initially illuminate
WHITE. It will remain WHITE when the vehicle is traveling slower than 40 mph or when
the system does not detect the lane markers. When the system detects the lane markers
and can assist the steering, the LKA icon will illuminate GREEN.
HOLD If the LKA detects that you are moving outside of your lane, the system may give an
audible warning HOLD
and display an LDW alert on the Instrument Cluster. If the vehicle
continues to move outside of the lane, LKA may provide steering inputs, trying to
(Located on Driver’s Panel to the left of the steering wheel)
prevent the vehicle from moving outside its lane.
LKA is the operating mode by default when the Lane Safety/LKA button A is
depressed to ON.
LANE KEEPING ASSIST LANE KEEPING ASSIST LANE KEEPING ASSIST LANE KEEPING ASSIST

There are 3 available modes:

• Active LKA — Provides more frequent steering inputs than standard LKA.
When the front camera does not When the front camera detects • Lane Keeping Assist — Guides driver to keep vehicle within lanes and provides
detect the lane traveled in, the the lane traveled in, both lanes
lanes are not illuminated. are illuminated. steering inputs when vehicle is about to deviate from the lane.
• Lane Departure Warning — Alerts driver when the system detects the vehicle
leaving the lane. In this mode the system will not provide steering inputs.
IST LANE KEEPING ASSIST LANE KEEPING ASSIST

All systems will operate under the following conditions:

• The vehicle speed exceeds approximately 40 mph.
When the front camera detects the vehicle moving outside of the lane • LKA recognizes both sides of the lane markers the vehicle is traveling in.
traveled in, a vehicle crossing lane indicator will blink, either on the left
or right lane (as shown in both images above). • The vehicle is between the lane markers.

Lane Following Assist (LFA)12

LFA is designed to help ensure that the vehicle stays centered in its lane A by monitoring the
detected lane markings ahead and adjusting the steering. Once ON, the Instrument Cluster
indicator will initially illuminate WHITE, and on some vehicles, when Smart Cruise Control (SCC)*
is engaged. It will remain WHITE when the system does not detect the lane markers. When the
system detects the lane markers and can assist the steering, the LFA icon will illuminate GREEN B .
A LFA will operate only when these conditions are met:
• When the SCC is on and operating.
B • LFA recognizes both sides of the lane markers the vehicle is traveling in.
• The vehicle is traveling slower than 95 mph.
Reminders:
CRUISE
If the ignition is cycled, LFA returns to its previous state, on or off, if activated in the User Settings
menu and when combined with SCC. If using the steering wheel LFA button, then LFA defaults to off.
OK

Smart Cruise Control (SCC) with Stop and Go System*12

SCC is designed to maintain a predetermined distance from vehicles detected ahead by
automatically adjusting the driving speed as needed. With SCC on and activated, and the vehicle
A
CRUISEMODE distance set, the system can slow or bring the vehicle to a complete stop when slowing or stopped
traffic is detected ahead.
RES
OK
OK
SET
B To set/adjust the SCC speed:
CANCEL • Push the Driving Assist button A to turn the system ON. The CRUISE indicator will illuminate
on the Instrument Cluster and speed will be set to the current vehicle speed.
C
• Press the RES+/SET- button B up/down to increase/decrease the set speed.
• The SET indicator light, set speed and vehicle-to-vehicle distance will illuminate on the
Instrument Cluster’s LCD screen.
172ft 130ft 106ft
To set the vehicle-to-vehicle distance: Press the Vehicle Distance button C on the steering wheel.
82ft D The image on the LCD screen D will change when scrolling through the settings. Each time the
(Distances are approximate and vary button is pressed, the vehicle-to-vehicle distance will change.
depending on vehicle speed.)
To cancel SCC operation: Press the CANCEL button B or press the brake pedal.
To turn the SCC system OFF: Press the Driving Assist button A . The CRUISE indicator on the
Instrument Cluster will turn OFF.

Smart Power Liftgate Operation*7

When the Smart Key is on your person and you are within close proximity to the back of the vehicle,
the hazard lights will blink and a chime will sound for about 3 seconds as an alert that the Smart
Power Liftgate is about to open. Then the alert system will blink and chime 2 additional times
before opening the Smart Power Liftgate.
The Smart Power Liftgate feature is off by default. To enable the Smart Power Liftgate, go to
User Settings in the LCD Instrument Cluster modes or the touch screen.*1
Quick Tips:
• During the Smart Power Liftgate alert, the Smart Power Liftgate can be deactivated
with the Smart Key by pressing any button on the key fob or moving away from the
detection area.
Forward Collision-Avoidance Assist-Pedestrian (FCA-Ped)12
FCA is designed to detect and monitor a vehicle ahead or detect a pedestrian in the roadway
COLLISION WARNING through front view camera recognition and front radar signals to warn the driver that a collision is
imminent, and if necessary, temporarily apply emergency braking. Initially, FCA provides Forward
Collision Warning (FCW) when it detects a potential collision with a vehicle, pedestrian, or cyclist,*
emitting an audible warning and visual alert on the Instrument Cluster A .
To adjust the FCA initial warning activation time, go to User Settings, Driver Assistance, Warning
A Timing, and then select Normal, Early, or Late.
If the system detects that the collision risk has increased, FCA automatically applies the brakes
to reduce your speed, potentially helping to avoid or minimize the effects of a possible collision.
FCA-Ped can be turned ON in the User Settings menu on the Instrument Cluster display or the
touch screen.*1
FCA-Ped/FCW will become active when the:
• Engine Start/Stop button is ON.
• Vehicle is traveling faster than 5 mph.
• Electronic Stability Control (ESC) is ON.

Surround View Monitor (SVM)*1,12

The SVM is a parking support system that shows the area around the front, rear, left, and right
A sides of the vehicle via four cameras displayed in the infotainment system display.

AUTO
Press A to turn SVM ON/OFF.
HOLD

• When OFF: The camera view will automatically display on the infotainment system screen
when the vehicle is shifted into Reverse. The camera view will turn off when the vehicle is
shifted out of Reverse.
• When ON: The camera view will display on the infotainment system screen in both Drive
and Reverse. In Drive, the camera view will continue to display until the vehicle is traveling
at speeds above approximately 9 mph. If you keep SVM on, the camera view will reappear on
the infotainment system display whenever the vehicle speed drops below approximately 9 mph.
B • To change the SVM settings, press the onscreen settings icon B while the system is operating.

Highway Driving Assist (HDA)*13

HDA is designed to adjust the speed of the vehicle when driving on limited/controlled access
D A highways/freeways. The system can adjust the vehicle’s speed based on available highway speed
CRUISE
information. The automatic speed setting mode is designed to set the speed automatically by
adjusting to the current speed limits of the highway the vehicle is traveling on.
E OK
To activate HDA, turn Smart Cruise Control (SCC)* on by pressing the Driving Assist CRUISE /
Driving Assist Mode CRUISE button* A on the steering wheel. When HDA is activated and
the conditions are met, the Instrument Cluster indicator B will illuminate GREEN. If the conditions
are not met, HDA will be in standby mode and the indicator light B will illuminate WHITE. When in
operation, and if both lanes are recognized, the Instrument Cluster will show the lanes illuminated
WHITE and the HDA indicator illuminated GREEN B .
If HDA is activated, conditions are met and the SCC speed is set by the driver (at the posted
C
60 mph highway speed limit or slower), HDA will enter the automatic speed setting mode. The set speed
and AUTO will be displayed C in GREEN and an audible alert will sound.
HDA will operate only when these conditions are met:
• The vehicle is traveling slower than 110 mph or the highway speed limit.
• When driving on limited/controlled access highways/freeways.
• When the SCC is on and operating.
• When the SCC speed is set to current posted highway speed or slower.
B HDA User Settings:
To enable HDA, press the Mode button D on the steering wheel and go to User Settings in
the Instrument Cluster. Press the Move (OK) button E up/down and press to Driver Assistance,
then Driving Assist, Highway Driving Assist. Then press the OK button E to enable.
Some models access settings through the Vehicle Settings in the infotainment system. Press
the Setup hard key on the infotainment system screen, then press on the screen to enter
Vehicle Settings.

#1 Brand Overall for Long-Term Dependability

14

2023 Sorento X-Line SX Prestige shown on cover. Images or graphics for illustration only. *If equipped. 1Driving while distracted can result in a loss of vehicle control that may lead to an
accident, severe personal injury, and death. The driver’s primary responsibility is in the safe and legal operation of a vehicle, and use of any handheld devices, other equipment, or vehicle
systems which take the driver’s eyes, attention, and focus away from the safe operation of a vehicle or which are not permissible by law should never be used during operation of the vehicle.
2
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license. A Bluetooth® enabled cell phone is required
to use Bluetooth® Wireless Technology. 3Apple CarPlay, iPhone, and Siri are registered trademarks of Apple Inc., registered in the U.S. and other countries. CarPlay runs on your smartphone
cellular data service. Normal data rates will apply. 4Android Auto vehicle user interface is a product of Google and its terms and privacy statements apply. Requires the Android Auto app on
Google PlayTM store and an Android compatible smartphone running Android 5.0 Lollipop or higher. Data plan rates apply. Android, Android Auto, and Google Play are trademarks of Google
LLC or its affiliates. 5Purchase/lease of certain 2022 and newer Kia vehicles with Kia Connect (formerly UVO link) includes a complimentary 1-year subscription starting from new vehicle retail
sale/lease date as recorded by the dealer. After your complimentary 1-year Kia Connect subscription expires, continued access to the full suite of Kia Connect services available on your Kia
will require a paid subscription at the then current subscription rate or your use of certain Kia Connect features may immediately terminate. Use of Kia Connect is subject to agreement to the
Kia Connect Privacy Policy (available at owners.kia.com/us/en/privacy-policy.html) and Terms of Service (available at owners.kia.com/us/en/terms-of-service.html). Kia Connect is transferable
to subsequent owner during the original Kia Connect service term. Only use Kia Connect when safe to do so. Kia Access App is available from the Apple® App Store® or Google PlayTM store.
Kia America, Inc. reserves the right to change or discontinue Kia Connect at any time without prior notification or incurring any future obligation. Message and data rates may apply. Cellular
and GPS coverage are required to use most features. Kia Connect features may vary by model, model year, and trim level. Features, specifications, and fees are subject to change. For more
on details and limitations, visit www.kia.com or your authorized Kia dealer. Apple and App Store are registered trademarks of Apple Inc. Google and logos are trademarks of Google LLC. Kia
Connect may currently be unavailable for Model Year 2022 and newer vehicles sold or purchased in Massachusetts; please see the Kia Owner’s Portal for updates on availability. 6Do not use
remote climate control or remote start if vehicle is in an enclosed area (e.g., closed garage) or a partially enclosed area without ventilation. Close all doors leading from adjacent living areas to
the vehicle area before executing a remote climate control or remote start command. 7Driving with liftgate open may be unlawful and can draw dangerous exhaust fumes into vehicle; if you
choose to do so, keep air vents and windows open for ventilation. 8When engaged, Driver Attention Warning is not a substitute for safe driving and may not detect all instances of inattentive
driving practices. Failure to pay attention to travel conditions and vehicle operation could result in loss of vehicle control. Always drive safely and use caution. 9Charging system only works
with select devices. Refer to the vehicle’s Owner’s Manual for warnings and instructions. 10To avoid burn risk, use extreme caution when operating seat warmers. Refer to Owner’s Manual for
operating instructions and safety information. 11ISLA and MSLA are supplemental systems. The driver remains responsible for ensuring the safe and legal operation of the vehicle, including its
speed. 12Driver-assist technologies are not substitutes for safe driving, and may not detect all objects surrounding vehicle. Always drive safely and use caution. 13Highway Driving Assist is not
a substitute for safe driving, may not detect all objects surrounding the vehicle, and only functions on certain federal highways. Always drive safely and use caution. 14Kia received the fewest
reported problems among mass market brands in the J.D. Power 2022 U.S. Vehicle Dependability Studies based on 2019 models. See jdpower.com/awards for 2022 details.
©2022 Kia America, Inc., 111 Peters Canyon Road, Irvine, CA 92606