ENDURA

EVOLUTION 200
Low-rise elevators
Low- to mid-rise elevators

MOVE BEYOND
 MAKING
CITIES
BETTER

The world is changing, and our elevators

are evolving with it. TK Elevator is at the
forefront of urban mobility and solutions
for rapid growth.
In addition to half of the global population, it has been predicted
that another 2.8 billion people will reside in cities by 2050. As these
cities and skylines rise to unreachable heights, the urgent need to
provide sustainable options while adapting to new infrastructure
developments is ever-present.

At TK Elevator, we strive to exceed expectations for residential and

commercial buildings by offering elevators that reflect our pursuit of
innovation. That’s why we are proud to present our hydraulic elevator
for low-rise buildings, endura.

Being the standard in reliability for over seven decades, endura is

the perfect choice for any low-rise building. Customizable and sleek
with a smooth performance, endura also gives peace of mind when
it comes to sustainability. enviromax® fluid is 100% recyclable, 95%
petroleum-free and available on all endura elevators.

02 ENDURA
 CONTENTS
02
Making cities better 02

04
Engineering simplified for everyone 04

06
Choose endura 06
Machine room overview 06
Machine room-less overview 07

08
Simply more space 08

Smooth and reliable 10

TK Elevator has a goal to move

beyond and grow cities by providing
12
Options
safety and efficiency with our elevators. Steel shell 13

This goal is only made possibly Applied Panels 15

through our enhanced engineering Finishes 16
and intelligent technologies that will
allow for contemporary methods of Cab accessory options 17
moving 2.3 billion people globally
Fixtures 18
each day.
Entrance options 20

22
Planning 22

28
Our core values 28

MAX: real-time predictive maintenance

ENDURA 03
ENGINEERING
SIMPLIFIED
FOR EVERYONE
 Contractors
With endura, installation is easy. Our MRL application
guarantees that there's less to build and manage as it
removes the need for framing, electrical, HVAC,
fireproof doors, and the locks and signage necessary
for machine rooms.

You no longer have to provide disconnects and wiring

chases, or assign coordination and installation tasks to
partnering trades. Permanent power and a hoistway
with a hoisting beam as well as required safety
protection are all you need, and we do the rest.

Architects
There is no longer a need to worry about designing extra
space for a machine room as endura is a machine-room
less (MRL) application. The power unit is located in the
elevator pit and the controller fits in the door jamb.
A machine room application is available for locations
that require them or customers interested in a stronger
lifting power.

With biodegradable fluid, endura is energy-efficient.

This elevator that has reduced environmental impact
also comes standard with LED lighting that lasts for
years. Since the cab is from TK Elevator, it’s the
industry’s only UL-validated, 01350 CA-compliant,
low-emitting interior.

Building owners
This hydraulic elevator has fewer moving parts and
lower maintenance costs than low-rise traction MRLs.
It comes with MAX – our predictive maintenance solution
that can lower elevator downtime by up to 50 percent.
An electronic valve makes floor leveling adjustments
automatically, decreasing unexpected service visits.
A battery-lowering operation (included with our MRL
application) ensures tenants don't become trapped
during a power failure. Nonproprietary user interface
tools allow for unrestricted access for on-board adjusting
and troubleshooting.

All this simplicity and reliability means fewer headaches

for you — and your tenants.

ENDURA 05
 CHOOSE ENDURA
endura is perfect for low-rise buildings.
Whether you want the architectural design
freedom provided by machine room-less
applications, or if you’re in an area that
requires a machine room — our hydraulic
elevator has it all. Tenants will appreciate
its smooth, quiet and reliable performance.
The simplified design has fewer moving
parts than traction MRL elevators. This
means an easier installation and reduced
maintenance costs.

Machine room application.

Offering smooth and quiet performance,
our hydraulic elevator is ideal for small offices,
shops, schools, apartments and worship facilities.

Fit
Machine Room

Travel
Up to 33'-6½" with
above-ground jack*
Up to 60'-0" with
below-ground jack

06 ENDURA
Machine room-less application.
With our MRL application, all equipment fits in the
hoistway and you no longer need a machine room.

Fit
Machine room-less

Travel
Up to 33'-6½"with above-ground jack*

* with standard overhead and pit depth

ENDURA 07
 SIMPLY
MORE SPACE

Because our MRL application 1

doesn’t have a machine room,
you have more leasable building
space. Here are some of
its key components.

Less elevator downtime with MAX

Our predictive maintenance solution, MAX, 4
significantly reduces elevator downtime using
Internet of Things (IOT) technology.

You get MAX with all endura applications.

5

08 ENDURA
 1 2 3

Universal door operator Disconnects Controller

The new linear door operator You no longer need to provide Fits into a tiny 8½-inch wall and is
technology provides enhanced disconnects and wiring chases, fully digital. This saves space and
door reliability as well as quick, or assign coordination and helps reduce elevator noise.
smooth door operation. This installation tasks to partnering
reduces the number of service trades. Permanent power and a
calls due to malfunctioning doors. hoistway are all you need
to provide.

4 5

Power unit Jack unit (holeless design)

The power unit, located in the pit, is It also features a new electronic Our MRL application uses a holeless
designed to reduce noise in the valve. The valve is virtually jack that requires no drilling.
hoistway. It's sealed with a hardtop adjustment-free and allows for
and sound-deadening material. improved leveling accuracy.
Inside, the submersible design and
dual muffler devices ensure a
quiet ride.

ENDURA 09
 SMOOTH
AND RELIABLE

In our machine room application, 1

the power unit and controller are
located outside the hoistway. You’ll
choose from four applications based on
required travel distance and project site
conditions. All options are configurable
to any building design.

2
4

10 ENDURA
 1 2

Universal door operator Jack unit

It’s all about the doors. This new linear door Our telescopic above-ground and below-ground
operator technology improves elevator door conventional holed jacks provide a smooth elevator
reliability while providing a quick and smooth ride along with accurate leveling.
door operation.

3 4

Controller Power unit

Our powerful 32-bit microprocessor controller Enables smooth stops and starts along with
uses solid-state technology, boosting reliability. precise leveling. You’ll appreciate the low
The mounted user interface tool (UIT) provides maintenance requirements.
easy access to adjustments and parameters for
maintenance and service.

Maintenance costs are reduced because of non-

proprietary equipment, fewer testing
requirements and fewer components.

ENDURA 11
SIMPLE YET
SOPHISTICATED
We offer you choices, whether you
need vandal-resistant durability or
want to retain a sleek polished interior.
Available in many colors.

Pictured above: Brushed stainless steel wall

finish with suspended ceiling. Floors by others.
12 ENDURA
 Steel shell
Standard cab designs

Steel shell wall design

Clean and modern flat cab interior designs convey quality. Our durable formed steel shell cab is available in a variety
of powder coat options or can be upgraded to stainless steel.

Wall finish options

Powder coats

Metals1

Base finish options

Powder coats

Metals

ENDURA 13
VERTICAL
APPLIED PANELS
Our cab and finish options let you
personalize your elevator interior. Just
like you want to.

Pictured above: Graystone plastic laminate

vertical applied panels with downlight ceiling.
Floors by others.
14 ENDURA
 Applied panels
Upgraded cab

Steel shell wall with applied Panel finish options

panel design Plastic laminates Metals 1

Mix beauty and practicality with this

decorative and durable cab. The panel
design is constructed with a high- Woods

quality steel shell and vertical raised

panels made with a core of urea
formaldehyde-free particle board. Solids Patterns

Reveal, base, frieze finish options

Powder coats

Metals

1
Contact your local representative for detailed availability on our metal options.
ENDURA 15
 Finishes

Plastic laminates

Woods

6206 7759 8902 8905 8906 8907 8908 8915 8916

Planked Select White Waxed Danish Fox Storm Walnut Blackened
Deluxe Pear Cherry Painted Wood Maple Maple Teakwood Teakwood Fiberwood Fiberwood

Solids

7197 464 8792 839 8795

Dover White Graystone Winter Stop Red Matrix Blue
Sky Matte

Patterns

8826 8827 8958

Neutral Twill Sarum Twill Bubble Art

Powder Coats

F-105 F-112 F-119 F-120 F-121 F-122 F-124 F-125

Cedar Brown Pitch Black Chalk Board Hibiscus Clover Whistle Red Coral Cables Chai

F-126 F-127 F-128 F-129 F-130 F-131 F-132 F-133

Mustard Seed Field Coat Prairie Grass Elephant Ear Blue Patina Smoked Silver Toasted Cotton Reclaimed Gray

Metals

5WL Brushed Polished

Stainless Steel 1 Stainless Steel Stainless Steel 1

1
L imited application. Contact your local representative for details.

Colors may vary. We recommend examining a large color selector sheet before making a selection.

16 ENDURA
 Cab accessory options

Ceilings

Basic flat 1
Exposed cab top with optional
recessed lighting.

Suspended
White translucent diffusers with
ceiling frames.

Downlight 2
Metal pan downlight ceiling features
LED lighting with six or nine lights
(based on cab size.)

Handrails

Braille plates Sills Cylindrical

Option 1: Resin braille plate Our cab sill finishes allow you to 1½" cylindrical handrail
Option 2: Surface mount match your sills to any other design
cast braille plate component inside the cab.
Option 3: F lush (inlaid) mount
cast braille plate
Aluminum Flat bar
Metal bar handrail is available in
2", 4" or 6" widths.

Nickel Silver

Illustrations vary based on configurations. 1 Not available on all models. 2 L ighting options may vary depending on cab size.

ENDURA 17
 Fixtures

Traditional fixtures Vandal-resistant fixtures

Product details Product details
ʣ Faceplates in brushed or polished stainless steel ʣ Faceplates in brushed or polished stainless steel
ʣ Position indicator displays car location with matrix ʣ Metal push buttons and durable car riding lanterns
of red or blue LED-illuminated dots ʣ Pry-resistant hall jamb symbols and buttons
ʣ Position indicator displays car location with matrix
of red or blue LED-illuminated dots

Combo hall lantern and position Combo hall lantern and position
indicator with directional arrows indicator with directional arrows

Intermediate hall lantern Intermediate hall lantern

with arrows with arrows

Intermediate Terminal
hall station hall station

Intermediate hall Intermediate hall

station with fire station with fire
services devices services devices

Push button available in blue, white, red Car operating panel Push button available in red, blue, white Car operating panel
and green LED lighting and green LED lighting

Fixtures shown above are for representation only. Your project-specific application may vary.

18 ENDURA
 Door configurations
Door orientation options offer a range of benefits to accommodate different
project needs.

One-speed The most economical Two-speed Provides a wider Center opening Best for high-traffic
door offering, available with either opening without compromising buildings. Permits the quickest entry
right- or left-hand opening. door cycling time. Two doors move and exit, improving elevator service
(right-hand shown) in the same direction, one sliding while giving an attractive,
faster than the other. Available with symmetrical appearance.
either right- or left-hand opening.
(right-hand shown)

Opens right
Opens right at twice the speed Opens from center

Opens right
at normal speed

Closed door position Closed door position Closed door position

Opens right at
twice the speed Opens from center
Opens right

Interior of cab Interior of cab

Front returns
Column returns Wrap-around returns*
This return features a This return features a
hinged car operating panel hinged car operating
secured to the filler panel panel and separate
and aligned vertically with filler panel.
the column. Comes standard.

Filler Filler
panel panel

Cab wall Cab wall

Edge of platform Edge of platform

Front returns include the car station, return panel, signal fixtures and Images above represent return types in brushed stainless steel.
head jamb. * Comes standard

ENDURA 19
 ENTRANCE
OPTIONS
The entrance frame and door
are supplied by TK Elevator.
You'll choose from powder
coats or metal finishes.

20 ENDURA
 Entrance finishes

Hoistway and door entrance finishes

Typically, the entrance frame would match the door selection, but nothing says you have to.
Choose from a limited selection of powder coat color or brushed stainless steel finish.

Powder coats

Metals
Contact your local
representative for
detailed availability on
our metal options.

Powder coat finish Metal finish

T-style entrance frame in Chalk T-style entrance frame in Brushed
Board powder coat. Stainless Steel.

Hoistway entrance frame

Face of frame is a standard two inches.

Frame width

2"

⅜"

1
Frame height

Close-up of T-style frame

ENDURA 21
 PLANNING
Above-ground jack applications

The numbers at a glance

Type
Above-ground jack

Travel
Up to 33'-6½"

Capacity
2100 – 5000 lbs

Speed
Machine room-less Machine room 80 – 150 fpm

Holeless above-ground technical specifications

80, 100, 110, 125, 150 feet per minute
Speeds in fpm (dependent on project-specific conditions, such as capacity, machine room location, etc.)

33'-6½" with standard overhead and pit depth; serves up to six floors with additional
Maximum travel pit and overhead
Jack types Single, Two-stage, Three-stage (telescoping)
Power characteristics 200–480 VAC, 3 phase, 60 hertz; (single-phase application is available as an option)
Controller TAC32
Door operator Universal Door Operator
Manual lowering Standard

Standard on machine room-less application. Available as an option on machine

Battery-lowering operation room application.

22 ENDURA
Below-ground jack applications

The numbers at a glance

Type
Below-ground jack

Travel
Up to 60'-0"

Capacity
2100 – 5000 lbs

Speed
Machine room 80 – 200 fpm

Holed below-ground technical specifications

Speeds (fpm) 80, 100, 110, 125, 150, 175, 200 feet per minute

Maximum travel Below-ground jack: 60'-0"

Jack types Below-ground: conventional

Power Characteristics 200–480 VAC, 3 phase, 60 hertz; (single-phase application is available as an option)
Controller TAC32
Door Operator Universal Door Operator
Manual Lowering Standard
Battery-lowering operation Available as an option

ENDURA 23
 endura
Passenger elevators - twinpost above-ground

Side view Side view

Front opening Front and rear opening

A Hoistway width G Door clear height

S S B Hoistway depth O Minimum overhead
C Inside clear width P Minimum pit depth
D Inside clear depth S Safety beam
E Door clear width T Travel
F Inside clear height
O O
One-speed center opening doors
Top view: Top view:
F F
G G Front opening Front and rear opening

D B D
C C

E E
A A

One-speed side opening doors

1, 2 & 3 – Stage Jack

1, 2 & 3 – Stage Jack

T T Top view: Top view:

Front opening Front and rear opening

D B D
C C
G G
E E
A A

P P F Inside clear height: 7'-4" 5

G Door clear height: 7'-0"

O Minimum overhead:
Up to 100 fpm: Over 100 fpm:
1-Stage – 12'-2" 1-Stage – 12'-5"
Passenger elevator 2-Stage – 12'-8" 2-Stage – 12'-8"
1-and 2-Stage 3-stage
3-Stage – 12'-11" 3-Stage – 12'-11"
Capacity Front / Inside clear Door Door width
Hoistway 2,9 Hoistway 9
(lbs) rear CxD type E
AxB AxB
P Minimum pit depth: 4'-0" 6
2100 3 7'-4" x 5'-9" 7'-8" x 5'-9" F 5'-8" x 4'-3" One-speed 3'-0"
T Max travel possible: 1
2100 3 7'-4" x 6'-8¾" 7'-8" x 6'-8¾" F/R 5'-8" x 4'-3½" One-speed 3'-0"
1-Stage: Up to 100 fpm – 18'-11"
2500 8'-4" x 5'-9" 8'-8" x 5'-9" F 6'-8" x 4'-3" One-speed 3'-6" Over 100 fpm – 18'-8"
2500 4 8'-4" x 6'-8¾" 8'-8" x 6'-8¾" F/R 6'-8" x 4'-3½" One-speed 3'-6" 2-Stage: 28'-6"
3000 4
8'-4" x 6'-3" 8'-8" x 6'-3" F 6'-8" x 4'-9" One-speed 3'-6"
3-Stage: 48'-3½"

3000 4
8'-4" x 7'-2¾" 8'-8" x 7'-2¾" F/R 6'-8" x 4'-9½" One-speed 3'-6" S Safety beam required per
OSHA 1926.502 7
3500 4
8'-4" x 6'-11" 8'-8" x 6'-11" F 6'-8" x 5'-5" One-speed 3'-6"

3500 4 8'-4" x 7'-10¾" 8'-8" x 7'-10¾" F/R 6'-8" x 5'-5½" One-speed 3'-6"

4000 4 9'-4" x 6'-11" 9'-8" x 6'-11" F 7'-8" x 5'-5" One-speed 3'-6"/4'-0" Contact your local representative for various code
or jurisdictional exceptions, or alterations
4000 4 9'-4" x 7'-10¾" 9'-8" x 7'-10¾" F/R 7'-8" x 5'-5½" One-speed 3'-6"/4'-0" required.

See endnotes on page 29.

24 ENDURA
endura
Service elevators – twinpost above-ground

Side view Side view

Front opening Front and rear opening

A Hoistway width G Door clear height

B Hoistway depth O Minimum overhead
S S
C Inside clear width P Minimum pit depth
D Inside clear depth S Safety beam
E Door clear width T Travel
F Inside clear height

O O Two-speed side opening doors

Top view:
F F Front opening
G G

D B

E
A

Top view:
1, 2 & 3 – Stage Jack

1, 2 & 3 – Stage Jack

Front and
T T rear opening

D B

C
G G
E
A

F Inside clear height: 7'-4" 5

P P G Door clear height: 7'-0"

O Minimum overhead:
Up to 100 fpm: Over 100 fpm:
1-Stage – 12'-2" 1-Stage – 12'-5"
2-Stage – 12'-8" 2-Stage – 12'-8"
Service 1-and 2-Stage 3-Stage 3-Stage – 12'-11" 3-Stage – 12'-11"
Capacity Hoistway 2,8,9 Hoistway 8,9 Front/ Inside clear Door Door width 8
(lbs) AxB AxB rear CxD type E P Minimum pit depth: 4'-0" 6
4500 7'-4" x 9'-6½" 7'-8" x 9'-6½" F 5'-8" x 7'-9½" Two-speed 4'-0"/4'-6" T Max travel possible: 1
4500 7'-4" x 10'-9¼" 7'-8" x 10'-9¼" F/R 5'-8" x 7'-10" Two-speed 4'-0"/4'-6" 1-Stage: Up to 100 fpm – 18'-11"
Over 100 fpm – 18'-8"
5000 7'-4" x 10'-2" 7'-8" x 10'-2" F 5'-8" x 8'-5" Two-speed 4'-0"/4'-6"
2-Stage: 28'-6"
5000 7'-4" x 11'-4¾" 7'-8" x 11'-4¾" F/R 5'-8" x 8'-5½" Two-speed 4'-0"/4'-6" 3-Stage: 48'-3½"

5000H 7'-4" x 10'-9" 7'-8" x 10'-9" F 5'-8" x 9'-0" Two-speed 4'-0"/4'-6" S Safety beam required per
OSHA 1926.502 7
5000H 7'-4" x 11'-11¾" 7'-8" x 11'-11¾" F/R 5'-8" x 9'-0½" Two-speed 4'-0"/4'-6"

Contact your local representative for various code

or jurisdictional exceptions, or alterations
required.

See endnotes on page 29.

ENDURA 25
 endura
Passenger elevators - below-ground

Side view Side view

Front opening Front and rear opening

A Hoistway width G Door clear height

S S B Hoistway depth O Minimum overhead
C Inside clear width P Minimum pit depth
D Inside clear depth S Safety beam
E Door clear width T Travel
F Inside clear height X Jack hole depth
O O

One-speed center opening doors

F F Top view: Top view:
G G Front opening Front and rear opening

D B D
C C

E E
A A

T T One-speed side opening doors

Top view: Top view:
Front opening Front and rear opening

D B D
G G C C

E E
A A
P P
X X F Inside clear height: 7'-4" 5

G Door clear height: 7'-0"

O Minimum overhead:
Up to 100 fpm – 12'-0"
Over 100 fpm – 12'-3"
Passenger
Capacity Hoistway 2,9 Front/ Inside clear Door Door width P Minimum pit depth: 4'-0" 6
(lbs) AxB rear CxD type E

2100 3 7'-4" x 5'-9" F 5'-8" x 4'-3" One-speed 3'-0" S Safety beam required per
2100 3
7'-4" x 6'-8¾" F/R 5'-8" x 4'-3½" One-speed 3'-0" OSHA 1926.502 7
2500 8'-4" x 5'-9" F 6'-8" x 4'-3" One-speed 3'-6" T Max travel possible: 60'-0"
2500 4
8'-4" x 6'-8¾" F/R 6'-8" x 4'-3½" One-speed 3'-6"
X Standard jack hole depth:
3000 4 8'-4" x 6'-3" F 6'-8" x 4'-9" One-speed 3'-6"
Travel + 6'-0"
3000 4 8'-4" x 7'-2¾" F/R 6'-8" x 4'-9½" One-speed 3'-6"

3500 4 8'-4" x 6'-11" F 6'-8" x 5'-5" One-speed 3'-6"

3500 4
8'-4" x 7'-10¾" F/R 6'-8" x 5'-5½" One-speed 3'-6"
Contact your local representative for
4000 4
9'-4" x 6'-11" F 7'-8" x 5'-5" One-speed 3'-6"/4'-0" various code or jurisdictional exceptions,
4000 4 9'-4" x 7'-10¾" F/R 7'-8" x 5'-5½" One-speed 3'-6"/4'-0" or alterations required.

See endnotes on page 29.

26 ENDURA
endura
Service elevators – below-ground

Side view Side view

Front opening Front and rear opening
A Hoistway width G Door clear height

S S B Hoistway depth O Minimum overhead

C Inside clear width P Minimum pit depth
D Inside clear depth S Safety beam
E Door clear width T Travel
F Inside clear height X Jack hole depth

O O
Two-speed side opening doors

F F Top view:
G G Front opening

D B

E
A

Top view:
T T Front and
rear opening

D B

G G C

E
A
P P
X X F Inside clear height: 7'-4" 5

G Door clear height: 7'-0"

O Minimum overhead:
Up to 100 fpm – 12'-0"
Over 100 fpm – 12'-3"
Service
Capacity Hoistway 2,8,9 Front/ Inside clear Door Door width 8 P Minimum pit depth: 4'-0" 6
(lbs) AxB rear CxD type E

4500 7'-4" x 9'-6½" F 5'-8" x 7'-9½" Two-speed 4'-0"/4'-6" S Safety beam required per
OSHA 1926.502 7
4500 7'-4" x 10'-9¼" F/R 5'-8" x 7'-10" Two-speed 4'-0"/4'-6"

5000 7'-4" x 10'-2" F 5'-8" x 8'-5" Two-speed 4'-0"/4'-6" T Max travel possible: 60'-0"

5000 7'-4" x 11'-4¾" F/R 5'-8" x 8'-5½" Two-speed 4'-0"/4'-6" X Standard jack hole depth:
Travel + 6'-0"
5000H 7'-4" x 10'-9" F 5'-8" x 9'-0" Two-speed 4'-0"/4'-6"

5000H 7'-4" x 11'-11¾" F/R 5'-8" x 9'-0½" Two-speed 4'-0"/4'-6"

Contact your local representative for

various code or jurisdictional exceptions,
or alterations required.

See endnotes on page 29.

ENDURA 27
 endura MRL
controllers

Our endura MRL maximizes space because

the controller is in the entrance jamb.

A minimum 8½-inch wall thickness Controller installation

is required at the floor the controller The wall construction can be done
is located. The controller must be with drywall or masonry block.
located at the landing directly above For installation purposes, however,
the lowest landing served by the entire wall at the controller level
the elevator. must be left out until the elevator
frame and controller are in place.
If that’s not possible, the location
must be coordinated with your TK
Elevator representative.

Perspective view
8" min.
required Building power

28 ENDURA

Wall finish Lobby side

1" shaftliner filler by G.C.
endura with
machine room
Your endura MR system determines
the machine room you’ll need.
The most desirable machine room location is on the lowest
floor served, next to the elevator hoistway. At an additional
cost, the machine room can be located remotely
from hoistway.

Smaller or custom-sized machine rooms are available in

some cases. Contact your TK Elevator representative to
help determine your needs, as machine room arrangements
may vary from those shown.

Single-car
Single car A
configurations Power

Controller
Unit
Power unit A B C 10
Door height Room height

Submersible (large) 7'-2" 7'-1½" 4'-0" Min 7'-0" Min 7'-6" Disconnect
switch
Dry (large) 9'-10" 5'-6" 4'-0" Min 7'-0" Min 7'-6" B (by others)

C Single-car
with dry unit

D
Dual car Dual-car
configurations

Controller
Power
Room Unit
Power unit D E F 10 Door height
height
Submersible (large) 10'-5½" 10'-5½" 4'-0" Min 7'-0" Min 7'-6" E

Controller
Disconnect Power
switch Unit
Dry (large) 14'-7" 7'-0¾" 4'-0" Min 7'-0" Min 7'-6" (by others)

F Dual-car
with dry unit

Endnotes
Dimensional data shown is for both seismic and nonseismic conditions and complies with current ASME A17.1 and CSA
B44 Safety Code for Elevators. Local codes may vary from the national codes. Consult your TK Elevator representative
for details.
1
 5'-0" min. pit is required for additional travel. Travel above 12'-8"
A 6
Local codes may impact pit depth minimums.
(1-Stage) or 23'-2½" (2-Stage) or 33'-6½" (3-Stage) requires additional 7
 rovided and installed by others, as directed by your TK Elevator
P
pit and/or overhead by adding 1" for every 1" (1-Stage) or 2" (2-Stage)
representative. Clear overhead is shown to the bottom of the safety
or 3" (3-Stage) of additional travel. Max increase 2'-0" allowed in
beam.
overhead. Max travel can be limited by gross load on jack. Local
codes may impact pit depth minimum that will affect extended travel. 8
 or service cars (4500 and 5000 lbs capacity) with optional 4'-6"
F
Contact your local representative for max and min travel details. two-speed side opening door, the hoistway width becomes 8'-2"
for below-ground and 1- and 2-stage above-ground jack types and
2 In areas where a 7" deep pit ladder is required, additional hoistway
increases to 8'-4" for a 3-stage above-ground jack type. The hoistway
width or wall pocket will be required.
width must increase an additional 10" if front and rear configuration
3 This capacity is not available with center opening doors. with the same hand doors (catty-corner) are used.
4 To meet the requirements of IBC code for 84" stretchers, a 4'-0" 9
For multiple elevators: Add 4" for a divider beam between hoistways.
center opening (for 4000 lbs capacity only) or 3'-6" side opening 10
Clear opening
(for 3500 lbs or 4000 lbs capacity) door is required. If a smaller
capacity car needs to be the stretcher capable car, contact your local Illustrations and images in this brochure may differ from the installed
representative for more information. product. Consult your local representative for more information.
5
 imension shown is based on suspended ceiling design. An increase
D
in cab height will result in an increase in overhead requirements.
For above-ground, front and rear opening applications, the cab height
is limited to 7'-4".

ENDURA 29
 Our core principles

We deliver.
Reliable and high-quality products,
services and solutions with precision
and a superior cost-benefit ratio.

We innovate.
We understand. We strive to find
We listen, make suggestions, technology and business
and co-develop with solutions that cater to
our customers. future customer needs.

MOVE
BEYOND
We are leading the way. We build on
We act with foresight and a strong experience.
solution oriented mindset to Our expertise is based
progress our customers, on over 40 years of
employees and other stakeholders. engineering competence.

We act as a reliable partner. We empower our employees.

We act in an honest, authentic and We live an innovation culture based on
responsive manner towards customers, respect and efficient collaboration.
employees and other stakeholders.

30 ENDURA
 YOUR INNOVATION
PARTNER
elevators and escalators under maintenance countries of customers

1,500,000 100+
employees

50,000+
service available for customers locations

24/7 1,000+
service technicians

25,000+
Key
Comes standard Available Not available FPM Feet per minute
See endnotes on page 29.

LBS Pounds

ENDURA 31
 Suite 500

P: +1 844 427 5461

Atlanta, GA 30339

www.tkelevator.com/us
TK Elevator Corporation
788 Circle 75 Parkway SE

All illustrations and specifications are based on information in effect at time of publication approval.
TK Elevator reserves the right to change specifications or design and to discontinue items without prior notice or obligation.
© 2023 TK Elevator Corporation. CA License #C11-651371 | 29903-2 | endura brochure