Scribd Logo
Upload

Welcome to Scribd!

  • 29 views

    Section 5: Maintenance, Repair and Adjustment: 5.1 Maintenance Schedule 5.1. List of Required Regular Maintenance Works

    Uploaded by

    Vijay Bhure
    The document provides a maintenance schedule for various components of a plant. It recommends regular maintenance to minimize downtime, maximize lifespan of components, and maintain high performance. The schedule lists components, required maintenance works, and recommended intervals. Key components include the batch funnel, parallel-shaft helical gear unit, vibration motor, outlet belts, short material detector, and trunk conveyor. Regular cleaning, inspection, lubrication, and part replacement are recommended.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Section 5: Maintenance, Repair and Adjustment: 5.1 Maintenance Schedule 5.1. List of Required Regular Maintenance Works

    Uploaded by

    Vijay Bhure
    29 views1 page
    The document provides a maintenance schedule for various components of a plant. It recommends regular maintenance to minimize downtime, maximize lifespan of components, and maintain high performance. The schedule lists components, required maintenance works, and recommended intervals. Key components include the batch funnel, parallel-shaft helical gear unit, vibration motor, outlet belts, short material detector, and trunk conveyor. Regular cleaning, inspection, lubrication, and part replacement are recommended.

    Original Description:

    Cold been feeder LT1

    Original Title

    LT1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides a maintenance schedule for various components of a plant. It recommends regular maintenance to minimize downtime, maximize lifespan of components, and maintain high performance. The schedule lists components, required maintenance works, and recommended intervals. Key components include the batch funnel, parallel-shaft helical gear unit, vibration motor, outlet belts, short material detector, and trunk conveyor. Regular cleaning, inspection, lubrication, and part replacement are recommended.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    29 views1 page

    Section 5: Maintenance, Repair and Adjustment: 5.1 Maintenance Schedule 5.1. List of Required Regular Maintenance Works

    Uploaded by

    Vijay Bhure
    The document provides a maintenance schedule for various components of a plant. It recommends regular maintenance to minimize downtime, maximize lifespan of components, and maintain high performance. The schedule lists components, required maintenance works, and recommended intervals. Key components include the batch funnel, parallel-shaft helical gear unit, vibration motor, outlet belts, short material detector, and trunk conveyor. Regular cleaning, inspection, lubrication, and part replacement are recommended.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Operating Manual 5.1.

    1 - 1

    Section 5: Maintenance, Repair and Adjustment


    5.1 MAINTENANCE SCHEDULE
    5.1. List of Required Regular Maintenance Works
    A regular maintenance helps to minimize standstill periods, to maximize life of components and of the overall
    plant and to maintain a high level of performance.
    Please note that the information in the following table must be regarded as GENERAL RECOMMEN-
    DATIONS which cannot allow for individual conditions and therefore need to be updated and com-
    pleted according to own experiences of the operator.

    Information supplied separately or in the appendices of this manual may contain


    further required works.

    Component Required works Recommended interval Page

    Batch funnel Free sieve grizzle (if installed) from Daily -


    large stones
    Clean batch funnel Before material change or standstill, also -
    whenever regarded necessary
    Parallel-shaft helical Clean gear and change oil Every 2 years (with synth. oils: every 4 5.3.1-2
    gear unit years)
    Check oil level Weekly -

    Replace and re-grease rolling bear- Every 4 years 5.3.1-1


    ings
    Vibration motor Replace rolling bearing - At 100% vibration intensity: after 5.3.3-3
    approx. 3,000 operating hours or
    every 18 months
    - At 50% vibration intensity: after
    approx. 24,000 operating hours or
    after 12 years
    1)
    Outlet belts Re-grease drive and return Weekly 5.3.5-1
    drums on grease fittings
    1)
    Short material detector Re-grease grease fittings on Weekly 5.4.1-1
    transmitter bearing
    Check function and free movement Daily -
    Watch if vibration motor reacts on Daily -
    short material detector
    Tackle line emergency General inspection every 200 operating hours or monthly 5.3.4-3
    switch
    Trunk conveyor Check the head scrapers. Replace, every 200 operating hours or monthly -
    if necessary
    Check belt run Twice daily -
    Re-grease drive and return drums Weekly 5.3.5-1
    on grease fittings
    Clean belt rollers Weekly -
    Check belt for damage Daily -
    Check feeding funnel. Clean, if Twice daily
    necessary
    Clean the floor below the cleaning Twice daily
    unit and the feeding funnel
    ________________________________________________________________________________________________
    1) Recommended lubricants: Standard Multi-purpose Grease (See table below for examples of suitable trade marks))

    Version: 150304a LINTEC GmbH & Co. KG

    You might also like