0% found this document useful (0 votes)
185 views21 pages

Design of Solid Slab

This document provides design details for solid slabs, including material properties, load specifications, dimensions, reinforcement details, and design checks. It includes specifications for 45 different slab designs labeled B1 through B45, listing the beam size, reinforcement amounts and spacing for each. Deflection and cracking checks are performed and all designs are reported as safe.

Uploaded by

alslek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
185 views21 pages

Design of Solid Slab

This document provides design details for solid slabs, including material properties, load specifications, dimensions, reinforcement details, and design checks. It includes specifications for 45 different slab designs labeled B1 through B45, listing the beam size, reinforcement amounts and spacing for each. Deflection and cracking checks are performed and all designs are reported as safe.

Uploaded by

alslek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 21

Design Of Solid Slabs

F cu L.L. Width of beam


NO
(Kg/cm2)
F y (Kg/cm2) R1 max ωmax (Kg/m2)
F.L. (Kg/m2) (cm)
S1 250 4000 0.124 0.172 1000 200 20

Note Slabs should not be less than 8 cm for slabs subjected to static loads and 12 cm for slabs subjected
Live Loads for two way slabs should be less than 5 kN/m2
ts (cm) Type Lx (m) Condition Ly (m) Condition Lx CLEAR (m)

18 slab 3.1 Simple 4.2 Simple 2.9

and 12 cm for slabs subjected to dynamic loads


LX CLEAR + ts Ly CLEAR + ts 1.05 * L y CLEAR
1.05 * L X CLEAR (m) L X EFFECTIVE Ly CLEAR (m) L y EFFECTIVE
(m) (m) (m)
3.08 3.045 3.08 4 4.18 4.2 4.2
Short direction Condition Long direction Condition mx my r

3.08 Simple 4.2 Simple 1 1 1.3636363636


Type of Slab t min tmin For Ignore Deflection CHECK

Two way Slab 8.8 10.752808988764 SAFE


α β Dead load (t/m2) working

0.531818181818182 0.188222222222222 0.65


W u (t/m2) Ultimate W (t/m2) working w α (Short) Ultimate

2.51 1.65 1.33486363636364


w α d.l working w α l.l working w α (Short) working

0.345681818181818 0.531818181818182 0.8775


w β (Long) Ultimate B (cm) Cover d (cm) M Short (t.m) Ultimate

0.472437777777778 100 4 14 1.5828813


M Short (t.m) working R1 R1(checked) ω ω(checked)
1.0405395 0.0323037 0.0323037 0.038598904 0.038598904
A s (cm2) As min (cm2) As final (cm2) Diameter (mm) No of Bars

3.37740407677145 2.1 3.37740407677145 10 5


As(final) cm2 B (cm) d (cm) M long (t.m) R1 R1(checked)
3.92699081698724 100 13 1.0417253 0.0246562201183432 0.0246562201183
ω ω(checked) A s (cm2) As min (cm2) As final (cm2)

0.02918332458 0.02918332458 2.3711451217745 1.95 2.3711451217745


Diameter (mm) No of Bars As - in X direction As - in Y direction yt (cm) Ig (cm4)

10 4 5 ⱷ 10 /m 4 ⱷ 10 /m 9 48600
Ec (kg/cm2) fctr (kg/cm2) Mcr (ton.m) Check 2 n

221359.436211787 30.0416377715996 1.62224843967 The section is not cracked ---


take n nAs Z Icr (cm4) Ie (cm4) ΔD.L (mm) ΔL.L (mm)

10 --- --- ---- 48600 0.3765163798 0.3080588562


Δtotal (mm) Δall (mm) Check Deflection

1.4376079955 12.32 Safe ---- 1


Simple 0.87
Continuous 0.76
Continuous from Two End
B1 B20X50 2Y16 2Y16 0Y16 2-8@17
B2 B20X60 2Y16 2Y16 0Y16 2-8@15
B3 B30X60 3Y16 3Y16 0Y16 2-8@20
B4 B30X60 3Y16 4Y16 0Y16 2-8@20
B5 B30X60 4Y16 3Y16 2Y16 2-8@20
B6 B30X60 5Y16 4Y16 2Y16 2-8@17
B7 B30X60 4Y16 4Y16 2Y16 2-8@17
B8 B30X60 6Y16 4Y16 3Y16 2-8@13
B9 B30X70 3Y16 4Y16 0Y16 2-8@17
B10 B30X70 7Y16 4Y16 3Y16 2-8@17
B11 B30X70 6Y16 4Y16 4Y16 2-8@13
B12 B30X70 5Y16 3Y16 2Y16 2-8@20
B13 B30X70 6Y16 4Y16 4Y16 2-8@20
B14 B30X70 7Y18 5Y18 2Y18 2-10@17
B15 B30X70 6Y18 4Y18 2Y18 2-8@13
B16 B30X70 4Y18 4Y18 2Y18 2-8@20
B17 B30X70 5Y18 5Y18 0Y18 2-8@15
B18 B30X70 8Y18 5Y18 4Y18 2-10@15
B19 B30X70 7Y16 4Y16 2Y16 2-8@20
B20 B30X80 8Y18 5Y18 3Y18 2-10@15
B21 B30X80 4Y18 4Y18 0Y18 2-8@15
B22 B30X70 5Y16 4Y16 2Y16 2-8@17
B23 B30X70 4Y16 4Y16 0Y16 2-8@20
B24 B30X70 7Y18 5Y18 2Y18 2-8@17
B25 B30X80 7Y18 5Y18 2Y18 2-8@15
B26 B30X70 6Y18 4Y18 2Y18 2-10@15
B27 B30X70 5Y18 5Y18 2Y18 2-8@15
B28 B30X70 3Y18 4Y18 0Y18 2-8@15
B29 B30X70 5Y18 5Y18 2Y18 4-8@15
B30 B30X130 5Y18 5Y18 0Y18 2-8@15
B31 B30X130 6Y18 5Y18 0Y18 2-8@15
B32 B30X70 6Y16 4Y16 2Y16 2-8@20
B1 B20X50 2Y16 2Y16 0Y16 2-8@17
B2 B20X60 2Y16 2Y16 0Y16 2-8@15
B3 B30X60 3Y16 3Y16 0Y16 2-8@20
B4 B30X60 3Y16 4Y16 0Y16 2-8@20
B5 B30X60 4Y16 3Y16 2Y16 2-8@20
B6 B30X60 5Y16 4Y16 2Y16 2-8@17
B7 B30X60 4Y16 4Y16 2Y16 2-8@17
B8 B30X60 6Y16 4Y16 3Y16 2-8@13
B9 B30X70 3Y16 4Y16 0Y16 2-8@17
B10 B30X70 7Y16 4Y16 3Y16 2-8@17
B11 B30X70 6Y16 4Y16 4Y16 2-8@13
B12 B30X70 5Y16 3Y16 2Y16 2-8@20
B13 B30X70 6Y16 4Y16 4Y16 2-8@20
B14 B30X70 7Y18 5Y18 2Y18 2-10@17
B15 B30X70 6Y18 4Y18 2Y18 2-8@13
B16 B30X70 4Y18 4Y18 2Y18 2-8@20
B17 B30X70 5Y18 5Y18 0Y18 2-8@15
B18 B30X70 8Y18 5Y18 4Y18 2-10@15
B19 B30X70 7Y16 4Y16 2Y16 2-8@20
B20 B30X80 8Y18 5Y18 3Y18 2-10@15
B21 B30X80 4Y18 4Y18 0Y18 2-8@15
B22 B30X70 5Y16 4Y16 2Y16 2-8@17
B23 B30X70 4Y16 4Y16 0Y16 2-8@20
B24 B30X70 7Y18 5Y18 2Y18 2-8@17
B25 B30X80 7Y18 5Y18 2Y18 2-8@15
B26 B30X70 6Y18 4Y18 2Y18 2-10@15
B27 B30X70 5Y18 5Y18 2Y18 2-8@15
B28 B30X70 3Y18 4Y18 0Y18 2-8@15
B29 B30X70 5Y18 5Y18 2Y18 4-8@15
B30 B30X130 5Y18 5Y18 0Y18 2-8@15
B31 B30X130 6Y18 5Y18 0Y18 2-8@15
B32 B30X70 6Y16 4Y16 2Y16 2-8@20
B33 B30X80 4Y16 4Y16 0Y16 2-8@15
B34 B30X80 7Y16 5Y16 2Y16 2-8@15
B35 B40X90 7Y25 4Y25 2Y25 2-8@15
B36 B30X70 5Y16 5Y16 2Y16 2-8@15
B37 B30X70 4Y16 5Y16 0Y16 2-8@15
B38 B40X90 8Y20 5Y20 3Y20 4-8@15
B39 B40X90 5Y20 4Y20 2Y20 4-8@15
B40 B30X70 4Y18 4Y18 0Y18 2-8@15
B41 B40X70 6Y18 4Y18 2Y18 2-8@15
B42 B40X70 4Y18 4Y18 0Y18 4-8@20
B43 B40X90 7Y20 5Y20 2Y20 4-8@15
B44 B40X90 5Y20 5Y20 0Y20 4-8@15
B45 B40X90 4Y20 4Y20 0Y20 4-8@15
B46 B30X90 6Y20 4Y20 2Y20 4-8@15
B47 B30X70 5Y16 4Y16 2Y16 2-10@15
1

You might also like