Scribd Logo
Upload

Welcome to Scribd!

  • 88 views

    TSH Ip 53.0070 - 01

    Uploaded by

    Cong Bui
    This document provides inspection procedures for surface finish on wedge threads. It outlines responsibilities, applicable personnel, references, definitions, and the inspection process. The inspection ensures surface finishes meet requirements specified in inspection report TSH-IP-53.0072. Thread surfaces must be smooth from start to end of thread form, and the root must be flat within 0.002" variation. A comparator is used to quantify finishes, and repairs are limited to manual Scotch-brite buffing followed by visual inspection. Inspection results are recorded on the inspection report.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TSH Ip 53.0070 - 01

    Uploaded by

    Cong Bui
    88 views4 pages
    This document provides inspection procedures for surface finish on wedge threads. It outlines responsibilities, applicable personnel, references, definitions, and the inspection process. The inspection ensures surface finishes meet requirements specified in inspection report TSH-IP-53.0072. Thread surfaces must be smooth from start to end of thread form, and the root must be flat within 0.002" variation. A comparator is used to quantify finishes, and repairs are limited to manual Scotch-brite buffing followed by visual inspection. Inspection results are recorded on the inspection report.

    Original Title

    TSH-IP-53.0070_01

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides inspection procedures for surface finish on wedge threads. It outlines responsibilities, applicable personnel, references, definitions, and the inspection process. The inspection ensures surface finishes meet requirements specified in inspection report TSH-IP-53.0072. Thread surfaces must be smooth from start to end of thread form, and the root must be flat within 0.002" variation. A comparator is used to quantify finishes, and repairs are limited to manual Scotch-brite buffing followed by visual inspection. Inspection results are recorded on the inspection report.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    88 views4 pages

    TSH Ip 53.0070 - 01

    Uploaded by

    Cong Bui
    This document provides inspection procedures for surface finish on wedge threads. It outlines responsibilities, applicable personnel, references, definitions, and the inspection process. The inspection ensures surface finishes meet requirements specified in inspection report TSH-IP-53.0072. Thread surfaces must be smooth from start to end of thread form, and the root must be flat within 0.002" variation. A comparator is used to quantify finishes, and repairs are limited to manual Scotch-brite buffing followed by visual inspection. Inspection results are recorded on the inspection report.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    For PVD Qualification

    Prepared by: Reviewed by: Approved by:

    Michael Soptick Rubén Stubelt Daniel Baiz


    Premium Connections Premium Connections Premium Connections
    Manufacturing Services Specialist Manufacturing Services Coordinator Manufacturing Engineering Manager
    Tenaris Tenaris Tenaris

    Inspection Procedure

    Surface Finish Inspection


    Wedge Threads

    Document Number TSH-IP-53.0070


    Revision 01
    Revision Date 01-Sep-2008
    Effective Date 20-Oct-2008
    Page(s) 4

    This document as well as the information or data contained herein are confidential and shall not be copied, recopied,
    reproduced, transmitted, disclosed or distributed to others or otherwise used for any purpose without the express, prior
    and written permission of Tenaris Connections AG and/or Hydril Company and/or its affiliated companies ("Tenaris").
    This document as well as the information or data contained herein are the exclusive property of Tenaris, and are to be
    returned upon request therefore. All rights in proprietary and novel features of the subject matter are expressly reserved
    by Tenaris. Recipient’s agreement to the foregoing is indicated by acceptance of this document. Copyrighted 2008 as an
    unpublished work. ALL RIGHTS RESERVED.
    For PVD Qualification Document Type Inspection Procedure
    Document Number TSH-IP-53.0070
    Surface Finish Inspection
    Wedge Threads Revision 01

    Page Number 2

    1. REVISION HISTORY

    Effective
    Rev. # Change Referenced Sections Prepared By: Reviewed by: Approved By:
    Date

    20-Oct-2008 01 New Document New Document


    Name: M. Soptick Name: R. Stubelt Name: D. Baiz

    Document Change

    Disposition of
    Affected Material

    Raw Material X
    In Process X
    Completed X
    For PVD Qualification Document Type Inspection Procedure
    Document Number TSH-IP-53.0070
    Surface Finish Inspection
    Wedge Threads Revision 01

    Page Number 3

    2. PURPOSE

    2.1 The Purpose of this document is to explain the inspection of the machined surface finishes.

    3. PERSONS AFFECTED

    3.1 This document is applicable to all:


    3.1.1 All Tenaris Premium Connections Manufacturing Services Personnel.
    3.1.2 Facilities licensed to thread TenarisHydril connections.

    4. REFERENCES

    4.1 Not Applicable.

    5. DEFINITIONS AND ABBREVIATIONS

    5.1 Definitions and Abbreviations are defined in the most current revision of TenarisHydril document
    TSH-GP-00.0001.

    6. RESPONSIBILITIES

    6.1 Responsibilities are defined in the most current revision of TenarisHydril document
    TSH-GP-00.0002.

    7. PERSONNEL QUALIFICATION

    7.1 Personnel qualification is defined in the most current revision of TenarisHydril document
    TSH-GP-00.0003.

    8. PROCEDURES

    8.1 Inspection:

    8.1.1 Surface finish requirements for Wedge products are defined on the inspection report.
    TSH-IP-53.0072, shall be used as visual acceptance criteria for in-process inspection
    and first/last article qualification.

    8.1.2 Thread surfaces, all root, crest, stab flank, and load flank surfaces shall be smooth and
    continous from the start of the full form thread to the thread end. Due to multiple
    threading passes during manufacture, steps may be found in the thread root. These
    steps are allowable in the thread root only. The thread root shall be flat within 0.002”
    total variation across the entire root in any place.

    8.1.3 A visual surface finish comparator will be used to quantify seal surface finishes. The
    repair of cometic damage of the threads of seals after machining is limited to the manual
    (not mechanized) use of Scotch-brite type materials. Following repair, each connection
    shall be visually inspected by trained personnel. If a repair was performed in the area of
    a seal, trained personnel shall be re-blue the seal to verify conformance to the
    requirements of drawing TSH-IP-00-0074.
    For PVD Qualification Document Type Inspection Procedure
    Document Number TSH-IP-53.0070
    Surface Finish Inspection
    Wedge Threads Revision 01

    Page Number 4

    The use of any material or process to disguise a defective condition (non-cleanup,


    improper thread form, etc.) is prohibited.

    8.2 Acceptance / Rejection criteria

    Surface Finish shall within the values indicated in the Inspection Report.

    8.3 Records

    The result of these inspections shall be recorded on the IR.

    9. ANNEX

    9.1 Not applicable.

    You might also like