Scribd Logo
Upload

Welcome to Scribd!

  • 12 views

    TSH-IP-00.0081 - 02 First and LST Article Inspection

    Uploaded by

    Cong Bui
    This document provides procedures for first and last article inspections of threaded connections manufactured by Tenaris. It outlines that first article inspections will be conducted at the start of production, following equipment changes, personnel changes, or delays of 8+ hours. Last article inspections involve inspecting the last connection from each lot. Any connections found out of tolerance during first or last article inspections will result in additional inspections to identify any defective items. Inspection results must be documented in the applicable report form.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TSH-IP-00.0081 - 02 First and LST Article Inspection

    Uploaded by

    Cong Bui
    12 views4 pages
    This document provides procedures for first and last article inspections of threaded connections manufactured by Tenaris. It outlines that first article inspections will be conducted at the start of production, following equipment changes, personnel changes, or delays of 8+ hours. Last article inspections involve inspecting the last connection from each lot. Any connections found out of tolerance during first or last article inspections will result in additional inspections to identify any defective items. Inspection results must be documented in the applicable report form.

    Original Title

    TSH-IP-00.0081_02 First and Lst Article Inspection

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides procedures for first and last article inspections of threaded connections manufactured by Tenaris. It outlines that first article inspections will be conducted at the start of production, following equipment changes, personnel changes, or delays of 8+ hours. Last article inspections involve inspecting the last connection from each lot. Any connections found out of tolerance during first or last article inspections will result in additional inspections to identify any defective items. Inspection results must be documented in the applicable report form.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    12 views4 pages

    TSH-IP-00.0081 - 02 First and LST Article Inspection

    Uploaded by

    Cong Bui
    This document provides procedures for first and last article inspections of threaded connections manufactured by Tenaris. It outlines that first article inspections will be conducted at the start of production, following equipment changes, personnel changes, or delays of 8+ hours. Last article inspections involve inspecting the last connection from each lot. Any connections found out of tolerance during first or last article inspections will result in additional inspections to identify any defective items. Inspection results must be documented in the applicable report form.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    For PVD Qualification

    Prepared by: Reviewed by: Approved by:

    Rubén Stubelt Michael Soptick Daniel Baiz


    Premium Connections Premium Connections Premium Connections
    Manufacturing Services Coordinator Manufacturing Services Specialist Manufacturing Engineering Manager
    Tenaris Tenaris Tenaris

    Inspection Procedure

    First and Last Article Inspection

    Document Number TSH-IP-00.0081


    Revision 02
    Revision Date 06-Apr-2009
    Effective Date 13-Apr-2009
    Page(s) 4

    This document as well as the information or data contained herein are confidential and shall not be copied, recopied,
    reproduced, transmitted, disclosed or distributed to others or otherwise used for any purpose without the express, prior
    and written permission of Tenaris Connections AG and/or Hydril Company and/or its affiliated companies ("Tenaris").
    This document as well as the information or data contained herein are the exclusive property of Tenaris, and are to be
    returned upon request therefore. All rights in proprietary and novel features of the subject matter are expressly reserved
    by Tenaris. Recipient’s agreement to the foregoing is indicated by acceptance of this document. Copyrighted 2009 as an
    unpublished work. ALL RIGHTS RESERVED.
    For PVD Qualification Document Type Inspection Procedure
    Document Number TSH-IP-00.0081
    First and last Article Inspection Revision 02

    Page Number 2

    1. REVISION HISTORY

    Effective
    Rev. # Change Referenced Sections Prepared By: Reviewed by: Approved By:
    Date

    20-Oct-2008 01 New Document New Document


    Name: R. Stubelt Name: M. Soptick Name: D. Baiz

    13-Apr-2009 02 Correction 8.1.3


    Name: R. Stubelt Name: M. Soptick Name: D. Baiz

    Document Change

    Disposition of
    Affected Material

    Raw Material X
    In Process X
    Completed X
    For PVD Qualification Document Type Inspection Procedure
    Document Number TSH-IP-00.0081
    First and last Article Inspection Revision 02

    Page Number 3

    2. PURPOSE

    2.1 The Purpose of this document is to explain the inspection of the First and Last Article.

    3. PERSONS AFFECTED

    3.1 This document is applicable to all:


    3.1.1 All Tenaris Premium Connections Manufacturing Services Personnel.
    3.1.2 Facilities licensed to thread TenarisHydril connections.

    4. REFERENCES

    4.1 Not Applicable.

    5. DEFINITIONS AND ABBREVIATIONS

    5.1 Definitions and abbreviations are defined in the most current revision of TenarisHydril document
    TSH-GP-00.0001.

    6. RESPONSIBILITIES

    6.1 Responsibilities are defined in the most current revision of TenarisHydril document
    TSH-GP-00.0002.

    7. PERSONNEL QUALIFICATION

    7.1 Personnel qualification is defined in the most current revision of TenarisHydril document
    TSH-GP-00.0003.

    8. PROCEDURES

    8.1 Inspection

    One (1) first and one (1) last article inspection shall be performed to all orders containing lots in
    excess of 10 connections, from each threading machine per lot producing connections for full
    length, coupling, and accessories.

    8.1.2 First Article Inspection:

    8.1.2.1 First article inspection shall be performed at the following frecuency:


    - Start of Production
    - Following any equipment changes, i.e. tooling (insert change is not considered
    tooling), machine crash, cold start, etc.
    - Following any change in machining personnel, i.e. shift change, etc.
    - Following any delay in production equal to or greater than eight (8) hours.
    For PVD Qualification Document Type Inspection Procedure
    Document Number TSH-IP-00.0081
    First and last Article Inspection Revision 02

    Page Number 4

    8.1.2.2 All product characteristics identified in the connections procedure and inspection
    report (including visual and Overlay inspection) shall be evaluated on the first
    article.

    8.1.3 Last Article Inspection:

    8.1.3.1 The last article shall be taken from one (1) of the last five (5) connections from
    each machine. The last part produced shall be inspected 100% following the
    requirements of 8.1.2.2.

    8.2 Acceptance / Rejection Criteria

    8.2.1 All dimensions shall be aimed to nominal, however, shall be within the tolerance window.
    8.2.1.1 If the part offered for first article is found to be out of tolerance in any parameter,
    the part shall be discarded and a new part shall be submitted for first article
    inspection.

    8.2.1.2 If the last article part is rejected, the inspector shall evaluate as many additional
    parts as necessary to ensure that all defective items have been located and
    identified.

    8.3 Records

    First and Last article inspections shall be documented in the applicable Inspection report form.
    The lastest version of the applicable Inspection Report Form can be downloaded from
    www.tenaris.com

    9. ANNEX

    9.1 Not Applicable.

    You might also like