Scribd Logo
Upload

Welcome to Scribd!

  • 23 views

    TSH-IP-00.0040 - 01 Total Length Inspection

    Uploaded by

    Cong Bui
    This document provides instructions for measuring the total length of PVD qualified connections. It was prepared by Rubén Stubelt and reviewed by Michael Soptick and approved by Daniel Baiz. The total length is defined as the distance between the face of the pin or box and the last shoulder. The procedure describes placing an anvil micrometer against the face and extending the stem to the last shoulder to measure the total length. The length is acceptable if it is within the limits prescribed on the inspection report. Inspection results are recorded on the inspection report.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TSH-IP-00.0040 - 01 Total Length Inspection

    Uploaded by

    Cong Bui
    23 views4 pages
    This document provides instructions for measuring the total length of PVD qualified connections. It was prepared by Rubén Stubelt and reviewed by Michael Soptick and approved by Daniel Baiz. The total length is defined as the distance between the face of the pin or box and the last shoulder. The procedure describes placing an anvil micrometer against the face and extending the stem to the last shoulder to measure the total length. The length is acceptable if it is within the limits prescribed on the inspection report. Inspection results are recorded on the inspection report.

    Original Title

    TSH-IP-00.0040_01 Total Length Inspection

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for measuring the total length of PVD qualified connections. It was prepared by Rubén Stubelt and reviewed by Michael Soptick and approved by Daniel Baiz. The total length is defined as the distance between the face of the pin or box and the last shoulder. The procedure describes placing an anvil micrometer against the face and extending the stem to the last shoulder to measure the total length. The length is acceptable if it is within the limits prescribed on the inspection report. Inspection results are recorded on the inspection report.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    23 views4 pages

    TSH-IP-00.0040 - 01 Total Length Inspection

    Uploaded by

    Cong Bui
    This document provides instructions for measuring the total length of PVD qualified connections. It was prepared by Rubén Stubelt and reviewed by Michael Soptick and approved by Daniel Baiz. The total length is defined as the distance between the face of the pin or box and the last shoulder. The procedure describes placing an anvil micrometer against the face and extending the stem to the last shoulder to measure the total length. The length is acceptable if it is within the limits prescribed on the inspection report. Inspection results are recorded on the inspection report.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    For PVD Qualification

    Prepared by: Reviewed by: Approved by:

    Rubén Stubelt Michael Soptick Daniel Baiz


    Premium Connections Premium Connections Premium Connections
    Manufacturing Services Coordinator Manufacturing Services Specialist Manufacturing Engineering Manager
    Tenaris Tenaris Tenaris

    Inspection Procedure

    Total Length Inspection

    Document Number TSH-IP-00.0040


    Revision 01
    Revision Date 01-Sep-2008
    Effective Date 20-Oct-2008
    Page(s) 4

    This document as well as the information or data contained herein are confidential and shall not be copied, recopied,
    reproduced, transmitted, disclosed or distributed to others or otherwise used for any purpose without the express, prior
    and written permission of Tenaris Connections AG and/or Hydril Company and/or its affiliated companies ("Tenaris").
    This document as well as the information or data contained herein are the exclusive property of Tenaris, and are to be
    returned upon request therefore. All rights in proprietary and novel features of the subject matter are expressly reserved
    by Tenaris. Recipient’s agreement to the foregoing is indicated by acceptance of this document. Copyrighted 2008 as an
    unpublished work. ALL RIGHTS RESERVED.
    For PVD Qualification Document Type Inspection Procedure
    Document Number TSH-IP-00.0040
    Total Length Inspection Revision 01

    Page Number 2

    1. REVISION HISTORY

    Effective
    Rev. # Change Referenced Sections Prepared By: Reviewed by: Approved By:
    Date

    20-Oct-2008 01 New Document New Document


    Name: R. Stubelt Name: M. Soptick Name: D. Baiz

    Document Change

    Disposition of
    Affected Material

    Raw Material X
    In Process X
    Completed X
    For PVD Qualification Document Type Inspection Procedure
    Document Number TSH-IP-00.0040
    Total Length Inspection Revision 01

    Page Number 3

    2. PURPOSE

    2.1 The Purpose of this document is to explain the measurement of the Total Length.

    3. PERSONS AFFECTED

    3.1 This document is applicable to all:


    3.1.1 All Tenaris Premium Connections Manufacturing Services Personnel.
    3.1.2 Facilities licensed to thread TenarisHydril connections.

    4. REFERENCES

    4.1 Not Applicable.

    5. DEFINITIONS AND ABBREVIATIONS

    5.1 Definitions and Abbreviations are defined in the most current revision of TenarisHydril document
    TSH-GP-00.0001.

    5.2 Total Length: The Total Length is the distance between the face of the pin or box and the last
    shoulder.

    6. RESPONSIBILITIES

    6.1 Responsibilities are defined in the most current revision of TenarisHydril document
    TSH-GP-00.0002.
    7. PERSONNEL QUALIFICATION

    7.1 Personnel qualification is defined in the most current revision of TenarisHydril document
    TSH-GP-00.0003.
    8. PROCEDURES

    8.1 Inspection
    Place the anvil of the depth micrometer against the face of the pin or box and extend the stem to
    make contact firmly with the last Shoulder or thread scratch, please refer to the appropriate
    inspection procedure for details regarding the necessary equipment.

    8.2 Acceptance / Rejection Criteria


    The Total Length is acceptable if the distance between the pin or box face and the last shoulder
    or thread scratch, measured parallel to the pipe axis (not the thread axis), is within the limits
    prescribed on the IR.

    8.3 Records
    The result of this inspection shall be recorded on the IR.
    For PVD Qualification Document Type Inspection Procedure
    Document Number TSH-IP-00.0040
    Total Length Inspection Revision 01

    Page Number 4

    9. ANNEX

    9.1 Not Applicable.

    You might also like