Scribd
Upload
11 views

Standard Channels: H (MM) B (MM) T (MM) T (MM) R (MM) R (MM) B (MM) D (MM) K (MM) K (MM) S (%) A (CM)

This document contains specifications for the cross-sectional geometry, mechanical properties, and design capacities of a standard C 3x4.1 channel section. The table provides dimensions, section properties, bending, shear, torsion, warping, stability, plasticity, and other metrics. Key specifications given for this section include a sectional area of 7.74 cm2, a plastic section modulus of 10.29 cm3, and design capacities for bending, shear, torsion, and other load cases.

Uploaded by

juancito
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
11 views

Standard Channels: H (MM) B (MM) T (MM) T (MM) R (MM) R (MM) B (MM) D (MM) K (MM) K (MM) S (%) A (CM)

This document contains specifications for the cross-sectional geometry, mechanical properties, and design capacities of a standard C 3x4.1 channel section. The table provides dimensions, section properties, bending, shear, torsion, warping, stability, plasticity, and other metrics. Key specifications given for this section include a sectional area of 7.74 cm2, a plastic section modulus of 10.29 cm3, and design capacities for bending, shear, torsion, and other load cases.

Uploaded by

juancito
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

C

 AISC 14
 --

C b

Standard Channels
tw r1

d
y
sf

tf
z
ey

Sectional
Geometry
Area

h b tw tf r1 r2 b1 d kdes kdet sf A
Section
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [%] [cm2]

C 3x4.1 76.2 34.9 4.8 6.3 10.8 1.9 15.1 41.3 17.5 17.5 16.67 7.74

Bending

ey Iy Iz Ip Ip,SC iy iz ip ip,SC max Sy max Sz Wz,min


Section
[mm] [cm4] [cm4] [cm4] [cm4] [mm] [mm] [mm] [mm] [cm3] [cm3] [cm3]

C 3x4.1 10.1 68.68 7.95 76.63 106.76 30.0 10.1 31.6 37.1 10.29 1.56 −7.84

1/5
Bending Shear Torsion Warping

Wz,max Wy Wz Ay Az ySC It It,s Wt max ω Iω iω


Section
[cm3] [cm3] [cm3] [cm2] [cm2] [mm] [cm4] [cm4] [cm3] [cm2] [cm6] [mm]

C 3x4.1 3.21 18.03 3.21 2.91 3.51 −22.8 1.12 49.97 1.76 6.89 82.44 8.8

2/5
Warping Stability Plasticity

Wω max Sω rz ry,SC Wpl,y Wpl,y,pure Wpl,z Wpl,ω αpl,y αpl,y,pure αpl,z αpl,ω
Section
[cm4] [cm4] [mm] [mm] [cm3] [cm3] [cm3] [cm4] [--] [--] [--] [--]

C 3x4.1 11.97 4.31 58.8 104.4 21.63 19.29 6.54 19.29 1.200 1.070 2.036 1.611

3/5
Plasticity Other

Apl,y Apl,z Npl Vpl,y Vpl,z Mpl,y Mpl,z ypl G Am V Am/V


Section
[cm2] [cm2] [kN] [kN] [kN] [kNm] [kNm] [mm] [kg/m] [m2/m] [cm3/m] [1/m]

C 3x4.1 4.13 3.33 183.030 56.076 45.134 4.96 1.38 −4.5 6.1 0.266 774.19 343.615

4/5
5/5

You might also like