SR-ML2420

Parameter Value

Model ML2420
System voltage 12V/24VAuto
No-load loss 0.7 W to 1.2W
Battery voltage 9V to 35V
151 131
Max. solar input voltage 100V(25℃)
90V(-25℃)

Max. power point voltage range Batter y Voltage+2V to 75V
Rated charging current 20A
Rated load current 20A

154
210
Max. capacitive load capacity 10000uF
Max. photovoltaic system input power 260W/12V 520W/24V
Conversion efficiency ≤98%

8
4XΦ9 4XΦ4.5 MPPT tracking efficiency ＞99%
Temperature compensation factor -3mv/℃/2V（default）
Ml2420
6XΦ7 9.3 Operating temperature -35℃ to +45℃
Product dimensions：210×151×59.5mm

59 5
.
Hole positions：154×131mm Protection degree IP32

17
111 Hole diameter：Φ3mm
Applicable wire: max. 8 AWG Weight 1.4Kg
143.6
Communication method RS232
Altitude ≤ 3000m
Product dimensions 210 × 151 × 59.5mm
SR-ML2420

1. With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails
resulting in multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point.
2. A built-in maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic
systems, and raise the charging efficiency by 15% to 20% compared with the conventional PWM method.
3. A combination of multiple tracking algorithms enables accurate tracking of the optimum working point on the I-V curve in an The User battery is customized battery. The system’s default voltage parameters are consistent with sealed lead-acid
extremely short time. battery parameters. When modifying battery charging and discharging parameters, observe the following logic:
4. The product boasts an optimum MPPT tracking efficiency of up to 99.9%. Overvoltage Disconnect Voltage＞Charging Limit Voltage≥ Equalizing Voltage≥ Boost Voltage≥ Floating
5. Advanced digital power supply technologies raise the circuit's energy conversion efficiency to as high as 98%. Charging Voltage＞Boost Restoring Voltage；
6. Charging program options are available for different types of batteries including gel batteries, sealed batteries, open batteries, Overvoltage Disconnect Voltage＞Overvoltage Disconnect Restoring Voltage；
lithium batteries, etc. Low Voltage Disconnect Restoring Voltage＞Low Voltage Disconnect Voltage≥ Discharging Limit Voltage；
7. The controller features a limited current charging mode. When the solar panel power exceeds a certain level and the charging
Under-Voltage Alarming Restoring Voltage＞Under-Voltage Alarming Voltage≥ Discharging Limit Voltage；
current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to
the rated level. Boost Restoring Voltage＞Low Voltage Disconnect Restoring Voltage；
8. Instantaneous large current startup of capacitive loads is supported.
9. Automatic recognition of battery voltage is supported.
10. LED fault indicators and an LCD screen which can display abnormality information help users to quickly identify system faults.
11. Historical data storage function is available, and data can be stored for up to a year.
12. The controller is equipped with an LCD screen with which users can not only check device operating data and statuses, but also

TEM. SENSOR
modify controller parameters.
13. The controller supports standard Modbus protocol, fulfilling the communication needs of various occasions.
14. The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the
charging current will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively
keeping the controller from being damaged by overheat.
15. Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in
order to extend the battery's service life.
16. TVS lighting protection.

9 Shuori New Energy/ www.srnesolar.com Shuori New Energy/ www.srnesolar.com 10

 SR-ML2430

Parameter Value

Model ML2430
System voltage 12V/24VAuto
No-load loss 0.7 W to 1.2W
Battery voltage 9V to 35V
Max. solar input voltage 100V(25℃)
90V(-25℃)

Max. power point voltage range Batter y Voltage+2V to 75V
Rated charging current 30A
Rated load current 20A

238
Max. capacitive load capacity 10000uF

180
Max. photovoltaic system input power 400W/12V 800W/24V
Conversion efficiency ≤98%

4XΦ4.5 4XΦ10
MPPT tracking efficiency ＞99%
173 72.5 147

Temperature compensation factor -3mv/℃/2V（default）

ML2430/ML2440
6XΦ8
Operating temperature -35℃ to +45℃
Product dimensions：238×173×72.5mm

72.5
Hole positions：180×147mm Protection degree IP32

22
Hole diameter：Φ3mm
123.5
168
Applicable wire: max. 8 AWG
Weight 2Kg
Communication method RS232
Altitude ≤ 3000m
Product dimensions 238 × 173 × 72.5mm
SR-ML2430

1. With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails
resulting in multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point.
2. A built-in maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic
systems, and raise the charging efficiency by 15% to 20% compared with the conventional PWM method.
3. A combination of multiple tracking algorithms enables accurate tracking of the optimum working point on the I-V curve in an The User battery is customized battery. The system’s default voltage parameters are consistent with sealed lead-acid
extremely short time. battery parameters. When modifying battery charging and discharging parameters, observe the following logic:
4. The product boasts an optimum MPPT tracking efficiency of up to 99.9%. Overvoltage Disconnect Voltage＞Charging Limit Voltage≥ Equalizing Voltage≥ Boost Voltage≥ Floating
5. Advanced digital power supply technologies raise the circuit's energy conversion efficiency to as high as 98%. Charging Voltage＞Boost Restoring Voltage；
6. Charging program options are available for different types of batteries including gel batteries, sealed batteries, open batteries, Overvoltage Disconnect Voltage＞Overvoltage Disconnect Restoring Voltage；
lithium batteries, etc. Low Voltage Disconnect Restoring Voltage＞Low Voltage Disconnect Voltage≥ Discharging Limit Voltage；
7. The controller features a limited current charging mode. When the solar panel power exceeds a certain level and the charging
Under-Voltage Alarming Restoring Voltage＞Under-Voltage Alarming Voltage≥ Discharging Limit Voltage；
current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to
the rated level. Boost Restoring Voltage＞Low Voltage Disconnect Restoring Voltage；
8. Instantaneous large current startup of capacitive loads is supported.
9. Automatic recognition of battery voltage is supported.
10. LED fault indicators and an LCD screen which can display abnormality information help users to quickly identify system faults.
11. Historical data storage function is available, and data can be stored for up to a year.
12. The controller is equipped with an LCD screen with which users can not only check device operating data and statuses, but also

TEM. SENSOR
modify controller parameters.
13. The controller supports standard Modbus protocol, fulfilling the communication needs of various occasions.
14. The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the
charging current will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively
keeping the controller from being damaged by overheat.
15. Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in
order to extend the battery's service life.
16. TVS lighting protection.

11 Shuori New Energy/ www.srnesolar.com Shuori New Energy/ www.srnesolar.com 12

 SR-ML2440

Parameter Value

Model Ml2440
System voltage 12V/24VAuto
No-load loss 0.7 W to 1.2W
Battery voltage 9V to 35V
151 131
Max. solar input voltage 100V(25℃)
90V(-25℃)

Max. power point voltage range Batter y Voltage+2V to 75V
Rated charging current 40A
Rated load current 20A

154
210
Max. capacitive load capacity 10000uF
Max. photovoltaic system input power 550W/12V 1100W/24V
Conversion efficiency ≤98%

8
4XΦ9 4XΦ4.5 MPPT tracking efficiency ＞99%
Temperature compensation factor -3mv/℃/2V（default）
Ml2440
6XΦ7 9.3 Operating temperature -35℃ to +45℃
Product dimensions：210×151×59.5mm

59 5
.
Hole positions：154×131mm Protection degree IP32

17
111 Hole diameter：Φ3mm
Applicable wire: max. 8 AWG
Weight 2Kg
143.6
Communication method RS232
Altitude ≤ 3000m
Product dimensions 238 × 173 × 72.5mm
SR-ML2440

1. With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails
resulting in multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point.
2. A built-in maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic
systems, and raise the charging efficiency by 15% to 20% compared with the conventional PWM method.
3. A combination of multiple tracking algorithms enables accurate tracking of the optimum working point on the I-V curve in an The User battery is customized battery. The system’s default voltage parameters are consistent with sealed lead-acid
extremely short time. battery parameters. When modifying battery charging and discharging parameters, observe the following logic:
4. The product boasts an optimum MPPT tracking efficiency of up to 99.9%. Overvoltage Disconnect Voltage＞Charging Limit Voltage≥ Equalizing Voltage≥ Boost Voltage≥ Floating
5. Advanced digital power supply technologies raise the circuit's energy conversion efficiency to as high as 98%. Charging Voltage＞Boost Restoring Voltage；
6. Charging program options are available for different types of batteries including gel batteries, sealed batteries, open batteries, Overvoltage Disconnect Voltage＞Overvoltage Disconnect Restoring Voltage；
lithium batteries, etc. Low Voltage Disconnect Restoring Voltage＞Low Voltage Disconnect Voltage≥ Discharging Limit Voltage；
7. The controller features a limited current charging mode. When the solar panel power exceeds a certain level and the charging
Under-Voltage Alarming Restoring Voltage＞Under-Voltage Alarming Voltage≥ Discharging Limit Voltage；
current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to
the rated level. Boost Restoring Voltage＞Low Voltage Disconnect Restoring Voltage；
8. Instantaneous large current startup of capacitive loads is supported.
9. Automatic recognition of battery voltage is supported.
10. LED fault indicators and an LCD screen which can display abnormality information help users to quickly identify system faults.
11. Historical data storage function is available, and data can be stored for up to a year.
12. The controller is equipped with an LCD screen with which users can not only check device operating data and statuses, but also

TEM. SENSOR
modify controller parameters.
13. The controller supports standard Modbus protocol, fulfilling the communication needs of various occasions.
14. The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the
charging current will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively
keeping the controller from being damaged by overheat.
15. Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in
order to extend the battery's service life.
16. TVS lighting protection.

13 Shuori New Energy/ www.srnesolar.com Shuori New Energy/ www.srnesolar.com 14

 SR-ML4860

Parameter Value

Model ML4860
System voltage 12V/24V/36V/48V Auto
No-load loss 0.7 W to 1.2W
Batter y voltage 9V to 70V
Max. solar input voltage 150V (25°C), 145V (-25°C)
Max. power point voltage range Batter y voltage +2V to 120V
Rated charging current 60A
Rated load current 20A
Max. capacitive load capacity 10000uF
Max. photovoltaic system input power 800W/12V; 1600W/24V; 2400W/36V; 3200W/48V

Conversion efficiency ≤ 98%

Technical requirements
Product dimensions ： 285 * 205*93mm MPPT tracking efficiency ＞ 99%
Hole positions ： 218 * 180mm
Hole diameter ： 4 . 5 Temperature compensation factor -3mv/°C/2V (default)
Applicable wire ： diameter<11mm
Operating temperature -35°C to +45°C
Waterproof level IP32
Weight 3.6kg
Communication method RS232 RS485
SR-ML4860 Altitude ≤ 3000m
Product dimensions 285*205*93mm

P
Pmax

Auto
INPUT
0 0.5s 150V Max.
MPPT 12V/24V/36V/48V LCD DISPLAY

5 years

IP32
● With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the
panel fails resulting in multiple peaks on the I-V cur ve, the controller is still able to accurately track the maximum
power point.
● A built-in maximum power point tracking algorithm can significantly improve the energy utilization efficiency of
photovoltaic systems, and raise the charging efficiency by 15% to 20% compared with the conventional PWM method. The User battery is customized battery. The system’s default voltage parameters are consistent with sealed lead-acid
● A combination of multiple tracking algorithms enables accurate tracking of the optimum working point on the I-V battery parameters. When modifying battery charging and discharging parameters, observe the following logic:
cur ve in an extremely short time. Overvoltage Disconnect Voltage＞Charging Limit Voltage≥ Equalizing Voltage≥ Boost Voltage≥ Floating
● The product boasts an optimum MPPT tracking efficiency of up to 99.9%. Charging Voltage＞Boost Restoring Voltage；
● Advanced digital power supply technologies raise the circuit's energy conversion efficiency to as high as 98%. Overvoltage Disconnect Voltage＞Overvoltage Disconnect Restoring Voltage；
● Different charging program options including those for gel batteries, sealed batteries and open batteries, Low Voltage Disconnect Restoring Voltage＞Low Voltage Disconnect Voltage≥ Discharging Limit Voltage；
customized ones, etc. are available.
Under-Voltage Alarming Restoring Voltage＞Under-Voltage Alarming Voltage≥ Discharging Limit Voltage；
● The controller features a limited current charging mode. When the solar panel power exceeds a certain level and the
charging current is larger than the rated current, the controller will automatically lower the charging power and bring Boost Restoring Voltage＞Low Voltage Disconnect Restoring Voltage；
the charging current to the rated level.
● Instantaneous large current startup of capacitive loads is supported.
● Automatic recognition of batter y voltage is supported.
● LED fault indicators and an LCD screen which can display abnormality information help users to quickly identify
system faults.

TEM. SENSOR
● Historical data storage function is available, and data can be stored for up to a year.
● The controller is equipped with an LCD screen with which users can not only check device operating data and
statuses, but also modify controller parameters.
● The controller supports standard Modbus protocol, fulfilling the communication needs of various occasions.
● All communications are electrically isolated, so users can rest assured in usage.
● The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set
value, the charging current will decline in linear proportion to the temperature and discharging will be halted so as to
curb the temperature rise of the controller, effectively keeping the controller from being damaged by overheat.
● With the help of an external batter y voltage sampling function, batter y voltage sampling is exempted from the effect
of line loss, making control more precise.
● Featuring a temperature compensation function, the controller can automatically adjust charging and discharging
parameters in order to extend the batter y's ser vice life.
● The controller also features a batter y over-temperature protection function, and when the external batter y
temperature exceeds the set value, charging and discharging will be shut off so as to protect components from being
damaged by overheat.
● TVS lighting protection

5 Shuori New Energy/ www.srnesolar.com Shuori New Energy/ www.srnesolar.com 6

 DH Series Intelligent Wireless Dimming LED Solar Charge Controller
SR-DH100/SR-DH50/SR-DH60/SR-DH20 Parameter

follows:

SR-DH100

The same series

SR-DH60 SR-DH50 SR-DH20

Features

1.New design of wireless remote-control can modify the controller parameter and read the system message according to the
handheld device.
2.Digital high precision constant-current control, the maximum efficiency can reach 96%.
3.The working current can be adjusted from 0.15A to 3.3A, the regulating precision is 30mA.
4.High dynamic performances of load insure current output stability even though the battery voltage and load sudden change.
5.3 section time frame dimming function design, work time can be set range from 0h to 15 hours, power can be set range from 0%
to 100%.
6.Intelligent power mode, the load power can be adjust automatically according to the battery power, can extend the maximum
working time of the battery.
7.Record the system status, can record at a max 7days and monitor the whole system.
8.The true constant current but not limited the current, insure the current output stability thus decrease LED light failure, increase
the LED service life.
9.Metal case, IP68 waterproof degree, can suitable use in all kinds of bad conditions.
10.With modified calculation of charging, the charging efficiency is improved, which lengthen the using time of solar energy.
11.Overheat preventing function, above a certain temperature will decrease the load or close the load.
12.Varies system protection function. Including the battery reverse connection, LED short circuit, open circuit protection and so on.

21 Shuori New Energy/ www.srnesolar.com Shuori New Energy/ www.srnesolar.com 22

 Version : 1.01
The above information is subject to change without prior notice.

Instruction Manual
BT-1_RS232 Bluetooth Adapter

Indicator description

Indicator State Description

Flashing in red In communication
Link indicator
Off Standby

System wiring diagram

Dear user:
Thank you for choosing our product！ RS232

Mobile phone＆APP

Product introduction: Note: use a standard network cable (parallel cable) for connection.

BT-1 is a Bluetooth module designed for empowering our company's Applicable controller models
solar charge controllers with Bluetooth communication function. By
teaming up with a cellphone APP, it can be used to perform wireless All controllers of our company
Applicable controller series
monitoring, parameters setting and data checking on the system. with a RS232 port

Communication mode RS232

Controller port RJ12
Main features:
1. Realizes wireless monitoring and control function over the solar Technical parameters
charge controller
2. Supports cellphone APP, and boasts a plug and play feature and Model BT-1
easy setting Input voltage 5V-12V
3. Employs a dedicated Bluetooth chip with high performance and
Standby power consumption 0.04W
ultra low power consumption
Operating power consumption 0.05W
4. Adopts Bluetooth 4.0 and BLE technologies, boasting advantages of
quick communication, excellent anti-interference capability, etc. Communication distance ≤15m

5. Dispenses with external power source, being powered directly Serial baud rate Fixed baud rate 9600bps

through the communication port Communication mode RS232

6. Boasts a communication distance of up to 15 m Port type RJ12
Standard network cable
Connection cable (parallel cable)
Product appearance:
Dimensions 66*51*15.5mm
Communication state Installation dimensions 57.5, φ3.2mm
Operating temperature -20°C to 75°C
Protection degree IP67

Model Net weight 120g

Installation
hole
Software download method

1、Download from our official website: Service Support – Download

Center – Bluetooth APP. You can either download it to your cellphone
Communication cable
by scanning the QR code, or download it to your computer.
2、 Download from APP Store: search for SRNE in APP Store and
download the corresponding APP.
The administrator password in the APP is: 135790123
1): RS232 port (RJ12), used for connecting to the solar charge
The contents of this manual are subject to change without prior
controller with RS232 as its communication bus
notice.
2): Link indicator : communication state indicator
编码：1.1.24.01504