Scribd Logo
Upload

Welcome to Scribd!

  • 93 views

    Erma First Fit BWTS

    Uploaded by

    tim kaminsky
    The document summarizes the ERMA FIRST FIT BWTS ballast water treatment system. It is a full flow electrolytic system that operates during ballasting to filter and disinfect ballast water through electrolysis. During ballasting, organisms and sediments are removed by a 40 micron filter and low levels of chlorine are produced to disinfect the water. The system has a small footprint and is certified by various regulatory bodies. It provides effective, simple, and cost efficient ballast water treatment for vessels of all types and sizes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Erma First Fit BWTS

    Uploaded by

    tim kaminsky
    93 views4 pages
    The document summarizes the ERMA FIRST FIT BWTS ballast water treatment system. It is a full flow electrolytic system that operates during ballasting to filter and disinfect ballast water through electrolysis. During ballasting, organisms and sediments are removed by a 40 micron filter and low levels of chlorine are produced to disinfect the water. The system has a small footprint and is certified by various regulatory bodies. It provides effective, simple, and cost efficient ballast water treatment for vessels of all types and sizes.

    Original Description:

    BWTS

    Original Title

    ERMA_FIRST_FIT_BWTS

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes the ERMA FIRST FIT BWTS ballast water treatment system. It is a full flow electrolytic system that operates during ballasting to filter and disinfect ballast water through electrolysis. During ballasting, organisms and sediments are removed by a 40 micron filter and low levels of chlorine are produced to disinfect the water. The system has a small footprint and is certified by various regulatory bodies. It provides effective, simple, and cost efficient ballast water treatment for vessels of all types and sizes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    93 views4 pages

    Erma First Fit BWTS

    Uploaded by

    tim kaminsky
    The document summarizes the ERMA FIRST FIT BWTS ballast water treatment system. It is a full flow electrolytic system that operates during ballasting to filter and disinfect ballast water through electrolysis. During ballasting, organisms and sediments are removed by a 40 micron filter and low levels of chlorine are produced to disinfect the water. The system has a small footprint and is certified by various regulatory bodies. It provides effective, simple, and cost efficient ballast water treatment for vessels of all types and sizes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    THE EXCELLENCE OF SIMPLICITY

    USCG Type Approved

    Ballast Water Treatment Systems

    ERMA FIRST FIT BWTS


    EXCELLENCE OF SIMPLICITY

    ERMA FIRST ESK ENGINEERING SOLUTIONS S.A.


    OPERATION
    ERMA FIRST FIT BWTS is a full flow electrolytic system that operates only during ballasting

    BALLASTING DE-BALLASTING
    FULL FLOW ELECTROLYSIS CONSIDERABLE GAINS
    During ballasting, the water goes through the During de-ballasting, the system will only monitor
    filter, where organisms and sediment (with a the residual oxidants and will further intervene if
    diameter larger than 40 microns) are separated necessary. The main stages of the system (filtra-
    and further discharged overboard. tion and disinfection) are bypassed.

    The filtered water enters the Electrolytic Cell. A Total Residual Oxidants (TRO) sensor samples
    From the chlorides of the water, free chlorine is the residual chlorine at the discharge line. If it is
    produced through the electrolysis process at a greater than 0.1 mg/L, a dosing pump is operat-
    very low concentration (around 4-6 mg/L). The ed for the dosage of neutralizing agent (Sodium
    treated water then, enters the ballast tanks. Bisulfite). Successful neutralization of free
    chlorine is confirmed by a second TRO sensor,
    installed at the far end point of the ballast
    discharge line.

    FULLY EFFECTIVE SMALL SMART


    CERTIFIED DISINFECTION FOOTPRINT SAVINGS
    IMO & USCG type continuous R&D on developed to exceed all competitive CapEx &
    approved, suitable electrochemistry for special installation low OpEx for a system
    for all water types innovative applications requirements fit for your pocket

    TECHNOLOGY
    The success of ERMA FIRST FIT BWTS lies in its simplicity and the proven technology followed.

    ERMA FIRST FIT BWTS incorporates the most reliable and efficient filtration followed by a state of the art
    disinfection stage. Mechanical separation refers to a 40 microns automatic backwashing filter. The disin-
    fection stage takes place in our own-design, highly customized electrodes, providing the appropriate
    amount of disinfectant agent whilst consuming minimum power. A special coating is applied on the
    electrodes, which are designed to minimize the production of harmful byproducts and have an extend-
    ed life time of minimum 5000-6000 hrs.
    SYSTEM
    ERMA FIRST FIT BWTS is an autonomous and reliable solution for all types and sizes of vessels

    ERMA FIRST FIT BWTS


    EXCELLENCE OF SIMPLICITY
    ERMA FIRST FIT BWTS is an advanced modular SEPARATION
    system that was developed to exceed all the 40 microns self-cleaning automatic
    special installation requirements either for screen filter
    newbuild vessels or any retrofit projects. The
    (two options available)
    major components of the system are a high-end
    backwash filter and an electrolytic cell with
    outstanding performance. Covering an extensive
    capacity range of 50-3740 m3/hr and being
    certified for operation in the most challenging DISINFECTION
    conditions by the IMO, USCG and classification
    Advanced quality Electrolysis Cells
    societies, ERMA FIRST FIT BWTS is an ideal
    solution for all types and sizes of ships.

    BENEFITS
    ERMA FIRST FIT BWTS is an autonomous and reliable solution for all types and sizes of vessels

    Simple and Flexible


    Suitable for all Pump Capacities
    Suitable for all Available Spaces
    Low Pressure Drop (0,5 bar)
    Suitable for Fresh Water (0,9 PSU Salinity) & Low Temp. Waters (-2oC)
    Low Power Consumption in Various Waters (1,8 kW/100 m3 at 30 PSU)
    CERTIFICATION
    ERMA FIRST FIT BWTS is fully certified according to the IMO, the USCG and the Classes

    IMO Final USCG Type LR Class Type Certification Certification


    Approval Approval Approval ISO 9001 ISO 14001

    NETWORK
    ERMA FIRST serves ships internationally through an expanding agents network and service stations

    For any further information or inquiries please do not hesitate to contact us at [email protected].

    SALES NETWORK SERVICE STATIONS


    Belgium Korea Brazil Netherlands
    Brazil Latvia China Norway
    China Lithuania Denmark Panama
    Croatia Netherlands Finland Singapore
    Cyprus Norway Greece Sweden
    Denmark Poland Japan United Arab Emirates
    Estonia Portugal Korea United States of America
    Finland Romania
    France Singapore
    Germany Spain For further information
    Greece Sweden please visit our website
    Hong Kong Taiwan
    www.ermafirst.com
    India Turkey
    Israel United Arab Emirates
    Italy United Kingdom
    Japan United States of America

    ERMA FIRST ESK ENGINEERING SOLUTIONS S.A.

    You might also like