Caterpillar
Caterpillar
Caterpillar
C15 ACERT ™
2100 rpm
Industrial
CATERPILLAR ENGINE
SPECIFICATIONS
I-6, 4-Stroke-Cycle Diesel
Bore......................................................... 137.2 mm (5.4 in)
Stroke.................................................... 171.4 mm (6.75 in)
Displacement.......................................... 15.2 L (927.56 in3)
Aspiration................................... Turbocharged Aftercooled
Compression Ratio....................................................... 18:1
Rotation (from flywheel end).................... Counterclockwise
Weight, Net Dry (approximate kg. lb)........ 1332 kg, 2937 lb
FEATURES
Emissions Full Range of Attachments
Meets Tier 3, Stage IIIA emission requirements. Tier 3 Wide range of bolt-on system expansion attachments,
refers to EPA (U.S.) standards. Stage IIIA refers to factory designed and tested.
European standards.
Unmatched Product Support Offered Through
Worldwide Supplier Capability Worldwide Caterpillar Dealer Network
Caterpillar More than 1,800 dealer outlets
- Casts engine blocks, heads, cylinder liners, and Caterpillar factory-trained dealer technicians service
flywheel housings every aspect of your industrial engine
- Machines critical components 99.7% of parts orders filled within 24 hours worldwide
- Assembles complete engine Caterpillar parts and labor warranty
- Factory-designed systems built at Caterpillar ISO Preventive maintenance agreements available for repair
9001:2000 certified facilities before failure options
Ownership of these manufacturing processes enables
Caterpillar to produce high quality, dependable product. Scheduled Oil Sampling program matches your oil
sample against Caterpillar set standards to determine:
Testing - internal engine component condition
- presence of unwanted fluids
Prototype testing on every model: - presence of combustion by-products
- proves computer design
- verifies system torsional stability
- functionality tests every model Web Site
For all your industrial power requirements, visit
Every Caterpillar engine is dynamometer tested under www.cat-industrial.com.
full load to ensure proper engine performance.
Exhaust System
Exhaust manifold, dry
Optional exhaust outlet
PERFORMANCE CURVES
Torque Metric
N•m
Engine
Power kW
BSFC
g/kW-hr
Engine Speed Engine Power Torque N•m BSFC g/kW-hr Fuel Rate L/hr
rpm kW
2100 403 1832 227.7 109.4
2000 403 1924 226.5 108.8
1900 403 2025 225 108.1
1800 403 2138 223.5 107.4
1700 398 2236 222 105.3
1600 390 2325 220.8 102.5
1500 378 2404 219.7 98.9
1400 362 2466 218.7 94.2
1300 331 2434 218.1 86.1
1200 268 2134 217.3 69.5
1100 242 2102 215.9 62.3
IND - C (Intermittent) Intermittent service where Engine Performance Diesel Engines — 7 liter and
maximum power and/or speed are cyclic (time at full higher
load not to exceed 50%). All rating conditions are based on SAE J1995, inlet air
standard
conditions of 99 kPa (29.31 in. Hg) dry barometer and
25°C (77°F)
temperature. Performance measured using a standard
fuel with fuel
gravity of 35° API having a lower heating value of
42,780 kJ/kg
(18,390 btu/lb) when used at 29° C (84.2° F) with a
density of 838.9 g/L.
Engine Dimensions
(1) Length 1381.0 mm Note: Do not use for installation design. See
general dimension drawings for detail
(2) Width 910.4 mm (Drawing # 2579952 ).
(3) Height 1274.5 mm
CATERPILLAR ENGINE
SPECIFICATIONS
I-6, 4-Stroke-Cycle Diesel
Bore....................................................... 145.0 mm (5.71 in)
Stroke...................................................... 183.0 mm (7.2 in)
Displacement....................................... 18.1 L (1,104.53 in3)
Aspiration................................... Turbocharged Aftercooled
Compression Ratio.................................................... 16.3:1
Rotation (from flywheel end).................... Counterclockwise
Weight, Net Dry (approximate kg. lb)....... 1332 kg (2937 lb)
FEATURES
Worldwide Supplier Capability Full Range of Attachments
Caterpillar Wide range of bolt-on system expansion attachments,
- Casts engine blocks, heads, cylinder liners, and factory designed and tested.
flywheel housings
- Machines critical components Unmatched Product Support Offered Through
- Assembles complete engine Worldwide Caterpillar Dealer Network
- Factory-designed systems built at Caterpillar ISO
9001:2000 certified facilities More than 1,800 dealer outlets
Ownership of these manufacturing processes enables Caterpillar factory-trained dealer technicians service
Caterpillar to produce high quality, dependable product. every aspect of your industrial engine
99.7% of parts orders filled within 24 hours worldwide
Caterpillar parts and labor warranty
Testing Preventive maintenance agreements available for repair
Prototype testing on every model: before failure options
- proves computer design
- verifies system torsional stability Scheduled Oil Sampling program matches your oil
- functionality tests every model sample against Caterpillar set standards to determine:
- internal engine component condition
Every Caterpillar engine is dynamometer tested under - presence of unwanted fluids
full load to ensure proper engine performance. - presence of combustion by-products
Web Site
For all your industrial power requirements, visit
www.cat-industrial.com.
Lube System
Crankcase breather
Control System Oil cooler
Electronic governing Oil filler
PTO speed control Oil filter
Programmable ratings Oil pan front sump
Cold mode start strategy Oil dipstick
Automatic altitude compensation Oil pump (gear driven)
Power compensation for fuel temperature
Programmable low and high idle and total engine limit General
Electronic diagnostics and fault logging
Engine monitoring system Paint, Caterpillar Yellow
J1939 Broadcast (diagnostic and engine status) Vibration damper
ADEM™ A4 Lifting eyes
Cooling System
Thermostats and housing, vertical outlet
Jacket water pump, centrifugal
Water pump, inlet
Exhaust System
Exhaust manifold, dry
Optional exhaust outlet
PERFORMANCE CURVES
Torque Metric
N•m
Engine
Power kW
BSFC
g/kW-hr
Engine Speed Engine Power Torque N•m BSFC g/kW-hr Fuel Rate L/hr
rpm kW
2100 470 2137 233.8 131.0
2000 470 2244 229.9 128.8
1900 470 2362 224.5 125.8
1800 470 2493 218.9 122.6
1700 465 2611 214.5 118.8
1600 455 2714 212.5 115.2
1500 441 2807 211.4 111.1
1400 422 2879 210.7 106.0
1300 387 2842 210.3 97.0
1200 309 2457 211.3 77.8
1100 258 2243 214.4 66.0
IND - C (Intermittent) Intermittent service where Engine Performance Diesel Engines — 7 liter and
maximum power and/or speed are cyclic (time at full higher
load not to exceed 50%). All rating conditions are based on SAE J1995, inlet air
standard
conditions of 99 kPa (29.31 in. Hg) dry barometer and
25°C (77°F)
temperature. Performance measured using a standard
fuel with fuel
gravity of 35° API having a lower heating value of
42,780 kJ/kg
(18,390 btu/lb) when used at 29° C (84.2° F) with a
density of 838.9 g/L.
Engine Dimensions
(1) Length 1388.2 mm Note: Do not use for installation design. See
general dimension drawings for detail
(2) Width 920.7 mm (Drawing # 2588747 ).
(3) Height 1243.1 mm
CATERPILLAR ENGINE
SPECIFICATIONS
I-6, 4-Stroke-Cycle Diesel
Bore....................................................... 145.0 mm (5.71 in)
Stroke...................................................... 183.0 mm (7.2 in)
Displacement....................................... 18.1 L (1,104.53 in3)
Aspiration................................... Turbocharged Aftercooled
Compression Ratio.................................................... 16.3:1
Rotation (from flywheel end).................... Counterclockwise
Weight, Net Dry (approximate kg. lb)....... 1332 kg (2937 lb)
FEATURES
Worldwide Supplier Capability Full Range of Attachments
Caterpillar Wide range of bolt-on system expansion attachments,
- Casts engine blocks, heads, cylinder liners, and factory designed and tested.
flywheel housings
- Machines critical components Unmatched Product Support Offered Through
- Assembles complete engine Worldwide Caterpillar Dealer Network
- Factory-designed systems built at Caterpillar ISO
9001:2000 certified facilities More than 1,800 dealer outlets
Ownership of these manufacturing processes enables Caterpillar factory-trained dealer technicians service
Caterpillar to produce high quality, dependable product. every aspect of your industrial engine
99.7% of parts orders filled within 24 hours worldwide
Caterpillar parts and labor warranty
Testing Preventive maintenance agreements available for repair
Prototype testing on every model: before failure options
- proves computer design
- verifies system torsional stability Scheduled Oil Sampling program matches your oil
- functionality tests every model sample against Caterpillar set standards to determine:
- internal engine component condition
Every Caterpillar engine is dynamometer tested under - presence of unwanted fluids
full load to ensure proper engine performance. - presence of combustion by-products
Web Site
For all your industrial power requirements, visit
www.cat-industrial.com.
Lube System
Crankcase breather
Control System Oil cooler
Electronic governing Oil filler
PTO speed control Oil filter
Programmable ratings Oil pan front sump
Cold mode start strategy Oil dipstick
Automatic altitude compensation Oil pump (gear driven)
Power compensation for fuel temperature
Programmable low and high idle and total engine limit General
Electronic diagnostics and fault logging
Engine monitoring system Paint, Caterpillar Yellow
J1939 Broadcast (diagnostic and engine status) Vibration damper
ADEM™ A4 Lifting eyes
Cooling System
Thermostats and housing, vertical outlet
Jacket water pump, centrifugal
Water pump, inlet
Exhaust System
Exhaust manifold, dry
Optional exhaust outlet
PERFORMANCE CURVES
Torque Metric
N•m
Engine
Power kW
BSFC
g/kW-hr
Engine Speed Engine Power Torque N•m BSFC g/kW-hr Fuel Rate L/hr
rpm kW
2100 522 2374 228.4 142.1
2000 522 2493 224.4 139.6
1900 522 2624 221.5 137.8
1800 522 2769 219 136.3
1700 516 2899 216.6 133.3
1600 505 3014 214.2 129.0
1500 490 3120 211.9 123.8
1400 469 3199 210.2 117.5
1300 430 3159 209.4 107.4
1000 296 2822 212.6 74.9
IND - C (Intermittent) Intermittent service where Engine Performance Diesel Engines — 7 liter and
maximum power and/or speed are cyclic (time at full higher
load not to exceed 50%). All rating conditions are based on SAE J1995, inlet air
standard
conditions of 99 kPa (29.31 in. Hg) dry barometer and
25°C (77°F)
temperature. Performance measured using a standard
fuel with fuel
gravity of 35° API having a lower heating value of
42,780 kJ/kg
(18,390 btu/lb) when used at 29° C (84.2° F) with a
density of 838.9 g/L.
Engine Dimensions
(1) Length 1409.3 mm Note: Do not use for installation design. See
general dimension drawings for detail
(2) Width 974.0 mm (Drawing # 2621427 ).
(3) Height 1256.1 mm
CATERPILLAR ENGINE
SPECIFICATIONS
I-6, 4-Stroke-Cycle Diesel
Bore....................................................... 145.0 mm (5.71 in)
Stroke...................................................... 183.0 mm (7.2 in)
Displacement.............................................. 18.1 L, 1106 in³
Aspiration................................... Turbocharged Aftercooled
Compression Ratio.................................................... 16.5:1
Rotation (from flywheel end).................... Counterclockwise
Weight, Net Dry (approximate kg. lb)....... 1332 kg (2937 lb)
Length................................................1388.2 mm (54.65 in)
Width....................................................920.7 mm (36.25 in)
Height................................................ 1243.1 mm (48.94 in)
FEATURES
Emissions Full Range of Attachments
Meets Tier 3, Stage IIIA emission requirements. Tier 3 Wide range of bolt-on system expansion attachments,
refers to EPA (U.S.) standards. Stage IIIA refers to factory designed and tested.
European standards.
Unmatched Product Support Offered Through
Worldwide Supplier Capability Worldwide Caterpillar Dealer Network
Caterpillar More than 1,800 dealer outlets
- Casts engine blocks, heads, cylinder liners, and Caterpillar factory-trained dealer technicians service
flywheel housings every aspect of your industrial engine
- Machines critical components 99.7% of parts orders filled within 24 hours worldwide
- Assembles complete engine Caterpillar parts and labor warranty
- Factory-designed systems built at Caterpillar ISO Preventive maintenance agreements available for repair
9001:2000 certified facilities before failure options
Ownership of these manufacturing processes enables
Caterpillar to produce high quality, dependable product. Scheduled Oil Sampling program matches your oil
sample against Caterpillar set standards to determine:
Testing - internal engine component condition
- presence of unwanted fluids
Prototype testing on every model: - presence of combustion by-products
- proves computer design
- verifies system torsional stability
- functionality tests every model Web Site
For all your industrial power requirements, visit
Every Caterpillar engine is dynamometer tested under www.cat-industrial.com.
full load to ensure proper engine performance.
Lube System
Crankcase breather
Control System Oil cooler
Electronic governing Oil filler
PTO speed control Oil filter
Programmable ratings Oil pan front sump
Cold mode start strategy Oil dipstick
Automatic altitude compensation Oil pump (gear driven)
Power compensation for fuel temperature
Programmable low and high idle and total engine limit General
Electronic diagnostics and fault logging
Engine monitoring system Paint, Caterpillar Yellow
J1939 Broadcast (diagnostic and engine status) Vibration damper
ADEM™ A4 Lifting eyes
Cooling System
Thermostats and housing, vertical outlet
Jacket water pump, centrifugal
Water pump, inlet
Exhaust System
Exhaust manifold, dry
Optional exhaust outlet
PERFORMANCE CURVES
IND - B - DM8169-00
Torque Metric
N•m
Engine
Power kW
BSFC
g/kW-hr
Engine Speed Engine Power Torque N•m BSFC g/kW-hr Fuel Rate L/hr
rpm kW
2100 448 2035 225.3 120.2
2000 448 2137 223.5 119.2
1900 448 2249 219.3 117.0
1800 448 2374 214.7 114.5
1700 443 2486 211.4 111.5
1600 433 2584 211.5 109.2
1500 420 2673 212.5 106.4
1400 402 2742 212.9 102.0
1300 368 2706 211.1 92.7
1200 294 2340 209.1 73.3
1100 246 2136 208.1 61.0
IND - B For service where power and/or speed are Engine Performance Diesel Engines — 7 liter and
cyclic (time at full load not to exceed 80%). higher
All rating conditions are based on SAE J1995, inlet air
standard
conditions of 99 kPa (29.31 in. Hg) dry barometer and
25°C (77°F)
temperature. Performance measured using a standard
fuel with fuel
gravity of 35° API having a lower heating value of
42,780 kJ/kg
(18,390 btu/lb) when used at 29° C (84.2° F) with a
density of 838.9 g/L.
Engine Dimensions
(1) Length See page Note: Do not use for installation design. See
1-Specifications general dimension drawings for detail
(2) Width (Drawing # null ).
for Dimensions
(3) Height
CATERPILLAR ENGINE
SPECIFICATIONS
Vee 12 Cylinder, 4-Stroke-Cycle Diesel
Bore......................................................... 137.2 mm (5.4 in)
Stroke...................................................... 152.4 mm (6.0 in)
Displacement..................................... 27.03 L (1,649.47 in3)
Aspiration................................... Turbocharged Aftercooled
Compression Ratio.................................................... 16.5:1
Rotation (from flywheel end).................... Counterclockwise
Weight, Net Dry (approximate kg. lb)....... 2946 kg (6495 lb)
FEATURES
Emissions Full Range of Attachments
Meets Tier 2 emissions requirements. Tier 2 refers to Wide range of bolt-on system expansion attachments,
EPA (U.S) standards. factory designed and tested.
Exhaust System
Exhaust manifold, dry
Optional exhaust outlet
PERFORMANCE CURVES
IND - B - DM9038-00
Torque Metric
N•m
Engine
Power kW
BSFC
g/kW-hr
Engine Speed Engine Power Torque N•m BSFC g/kW-hr Fuel Rate L/hr
rpm kW
2100 653 2968 206.6 160.8
2000 653 3117 202.9 157.8
1900 653 3281 200.3 155.8
1800 653 3463 198.3 154.3
1700 646 3628 197.7 152.2
1600 632 3771 197.9 149.1
1500 613 3900 199.9 146.0
1400 586 4000 201.8 141.1
1300 538 3949 202.6 129.8
IND - B For service where power and/or speed are Engine Performance Diesel Engines — 7 liter and
cyclic (time at full load not to exceed 80%). higher
All rating conditions are based on SAE J1995, inlet air
standard
conditions of 99 kPa (29.31 in. Hg) dry barometer and
25°C (77°F)
temperature. Performance measured using a standard
fuel with fuel
gravity of 35° API having a lower heating value of
42,780 kJ/kg
(18,390 btu/lb) when used at 29° C (84.2° F) with a
density of 838.9 g/L.
Engine Dimensions
(1) Length 1917.1 mm Note: Do not use for installation design. See
general dimension drawings for detail
(2) Width 1464.3 mm (Drawing # 2823892 ).
(3) Height 1320.6 mm
CATERPILLAR ENGINE
SPECIFICATIONS
Vee 12 Cylinder, 4-Stroke-Cycle Diesel
Bore......................................................145.0 mm (5.71 in)
Stroke...................................................162.0 mm (6.38 in)
Displacement..................................... 32.1 L (1,958.86 in3)
Aspiration...............................Turbocharged Aftercooled
Compression Ratio...................................................16.5:1
Rotation (from flywheel end).............. Counterclockwise
Weight, Net Dry (approximate kg. lb).. 2946 kg (6495 lb)
FEATURES
Emissions Full Range of Attachments
Meets Tier 2 emissions requirements. Tier 2 refers Wide range of bolt-on system expansion
to EPA (U.S) standards. attachments, factory designed and tested.
Exhaust System
Exhaust manifold, dry
Optional exhaust outlet
PERFORMANCE CURVES
IND - B - DM9030-00
Torque Metric
N•m
Engine
Power kW
BSFC
g/kW-hr
Engine Speed Engine Power Torque N•m BSFC g/kW-hr Fuel Rate L/hr
rpm kW
PERFORMANCE CURVES
IND - B - DM9030-00
Engine English
Torque
lb•ft
Engine
Power bhp
BSFC
lb/bhp-hr
Engine Speed Engine Power Engine Torque BSFC lb/bhp-hr Fuel Rate
rpm bhp lb•ft gal/hr
IND - B For service where power and/or speed are Engine Performance Diesel Engines — 7 liter and
cyclic (time at full load not to exceed 80%). higher
All rating conditions are based on SAE J1995, inlet
air standard
conditions of 99 kPa (29.31 in. Hg) dry barometer
and 25ºC (77ºF)
temperature. Performance measured using a
standard fuel with fuel
gravity of 35º API having a lower heating value of
42,780 kJ/kg
(18,390 btu/lb) when used at 29º C (84.2º F) with a
density of 838.9 g/L.
Engine Dimensions
(1) Length 1915.3 mm (75.41 in) Note: Do not use for installation design.
See general dimension drawings for
(2) Width 1478.7 mm (58.22 in) detail (Drawing # 2833535 ).
(3) Height 1319.2 mm (51.94 in)
CATERPILLAR ENGINE
SPECIFICATIONS
I-6, 4-Stroke-Cycle Diesel
Bore....................................................... 145.0 mm (5.71 in)
Stroke.................................................... 162.0 mm (6.38 in)
Displacement....................................... 32.1 L (1,958.86 in3)
Aspiration................................... Turbocharged Aftercooled
Compression Ratio.................................................... 16.5:1
Rotation (from flywheel end).................... Counterclockwise
Weight, Net Dry (approximate kg. lb)....... 2946 kg (6495 lb)
FEATURES
Emissions Full Range of Attachments
Meets Tier 2 emissions requirements. Tier 2 refers to Wide range of bolt-on system expansion attachments,
EPA (U.S) standards. factory designed and tested.
Exhaust System
Exhaust manifold, dry
Optional exhaust outlet
PERFORMANCE CURVES
Torque N m Metric
Engine
Power kW
BSFC
g/kW-hr
Engine Speed Engine Power Torque N m BSFC g/kW-hr Fuel Rate L/hr
rpm kW
2100 839 3815 214.7 214.7
2000 839 4006 210.6 210.6
1900 839 4217 209.7 209.8
1800 839 4451 207 207.0
1700 830 4662 204.7 202.6
1600 812 4846 203.6 197.1
1500 787 5010 203.1 190.5
1400 754 5143 202.4 181.9
1300 691 5076 202.2 166.6
1200 599 4764 204.6 146.0
1100 512 4448 205.8 125.7
IND - C (Intermittent) Intermittent service where Engine Performance Diesel Engines 7 liter and higher
maximum power and/or speed are cyclic (time at full All rating conditions are based on SAE J1995, inlet air
load not to exceed 50%). standard
conditions of 99 kPa (29.31 in. Hg) dry barometer and
25°C (77°F)
temperature. Performance measured using a standard
fuel with fuel
gravity of 35° API having a lower heating value of
42,780 kJ/kg
(18,390 btu/lb) when used at 29° C (84.2° F) with a
density of 838.9 g/L.
Engine Dimensions
(1) Length 1914.4 mm Note: Do not use for installation design. See
general dimension drawings for detail
(2) Width 1478.7 mm (Drawing # 2833535 ).
(3) Height 1319.2 mm