Scribd
Upload
42 views

SMT Process Map

The SMT process map outlines the steps for surface mount technology board assembly. It starts with setup where components like feeders, scanners, and reels are prepared. Then paste printing is done using a paste printing machine and stencil to apply solder paste. Next, solder paste height is measured if applicable. Components are then picked and placed on the board using an assembly machine. The board then goes through reflow in an oven to solder the components. Finally, the board undergoes inspection using machines like AOI and a microscope before being evaluated and either put in a magazine if passing or reworked if failing.

Uploaded by

210151 JOSE MANUEL RAMIREZ PINEDA
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
42 views

SMT Process Map

The SMT process map outlines the steps for surface mount technology board assembly. It starts with setup where components like feeders, scanners, and reels are prepared. Then paste printing is done using a paste printing machine and stencil to apply solder paste. Next, solder paste height is measured if applicable. Components are then picked and placed on the board using an assembly machine. The board then goes through reflow in an oven to solder the components. Finally, the board undergoes inspection using machines like AOI and a microscope before being evaluated and either put in a magazine if passing or reworked if failing.

Uploaded by

210151 JOSE MANUEL RAMIREZ PINEDA
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SMT Process Map.

START PCB Placed


Setup Ready. PCB printed. Reflowed PCB. Evaluation.
measured. Components.

Yes
Acceptable
SMT Setup Paste Printing. Solder Paste Height
Measurement (If applicable) Pick and Place. Reflow Inspection. `
Inspection?
Put in Magazine. FINISH.

No
• Setup. • Oven.
• Feeder. • Paste Printing Machine. • Koh Young. • AOI Machine.
• Technician. • PCB with components.
• Scanner. • Stencil. • PCB Printed. • Microscope.
• ASM Assembly Machine. • Program.
• Reels. • Solder Paste. • Program. • Quality Inspector.
• Program.
• Technician. • Technician. • Technician. • Program.
• Cars. • Program.
• Documentation. • PCB.
PCB Reworked.

Rework

• Soldering Iron.
• Microscope.
• Roller welding.
• Repair Technician.
José Manuel Ramirez Pineda.

You might also like