Scribd
Upload
835 views10 pages

DC Power Supply Project

This document describes a project to build an adjustable regulated DC power supply that can provide voltages from 1.2V to 30V. It consists of an AC transformer, rectifier bridge, smoothing capacitor, and adjustable voltage regulator integrated circuit. The objectives are to understand power supply circuit theory, design and simulate the circuit in Proteus, select components based on datasheets, create a PCB layout, and implement and troubleshoot the circuit on a board. A component list and circuit diagram are provided, along with examples of a simple PCB layout and 3D view from Proteus for reference in optimizing the design.

Uploaded by

ziademadalde
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
835 views10 pages

DC Power Supply Project

This document describes a project to build an adjustable regulated DC power supply that can provide voltages from 1.2V to 30V. It consists of an AC transformer, rectifier bridge, smoothing capacitor, and adjustable voltage regulator integrated circuit. The objectives are to understand power supply circuit theory, design and simulate the circuit in Proteus, select components based on datasheets, create a PCB layout, and implement and troubleshoot the circuit on a board. A component list and circuit diagram are provided, along with examples of a simple PCB layout and 3D view from Proteus for reference in optimizing the design.

Uploaded by

ziademadalde
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

DC Power Supply Project

PRESENTED BY
DR. SHERIF HEKAL
Variable Regulated Power Supply
Description:
the project aims to construct an adjustable regulated power supply that can provide DC voltage
ranging from 1.2 – 30 V.
the electric circuit consists of an AC Transformer followed by a rectifier bridge then smoothing
capacitor and an adjustable voltage regulator integrated circuit.
Variable Regulated Power Supply
Objective: you will learn the following skills that are related to the topics of the course
 Understanding the working theory of diodes, rectifiers, and linear regulators.
 Design and simulate the electric circuit on the simulator (Proteus).
 Read the data sheets of different components in the circuit to select the suitable components for
design.
 Extract the layout of printed circuit from Proteus then Implement the electric circuit on PCB board.
 Solve the problems of practical implementation through troubleshooting.
Variable Regulated Power Supply
Variable Regulated Power Supply
Component List

BR1 = Bridge Rectifier, 100V - 3A C1 = 2200 µF, 63V


IC1 = LM317, adjustable regulator C2 = 0.1 µF
V = Meter, 30V, Ri = 85 ohm C3 = 1µF, 40V
TR1 = Transformer, 25V, 2A Plug = 3-wire plug & cord
R1 = 18K, 5% S1 = On-Off toggle switch
R2 = 220 ohm, 5% D1 = 1N4001
R3 = 27K, 5% Fuse = 220V, 500mA, slow-blow
P1 = 5K, potentiometer Fuse Holder, wires, solder, case
Heat sink, knob for P1
Soldering Iron
Red & Black Banana Jacks
Variable Regulated Power Supply
Bridge Rectifier
Input from TR1 Case
Heat sink

C1
knob for P1
knob for P1 Potentiometer (P1)
DC output

Expected electronic Expected project S1 = On-Off Red & Black


circuit packaging / casing toggle switch Banana Jacks
Variable Regulated Power Supply

Solder
Soldering Iron

Fuse Bridge Rectifier


PCB Layout
The next slide shows simple circuit with the exported PCB layout using proteus.
I need your circuit to be optimized more than the proposed one in the next slide.
Try to optimize the positions of different components to get small size of the electronic circuit,
say 40 mm x 40 mm.
PCB Layout for example
3D view from Proteus for example

You might also like