SAP EWM – CLASS 32 – Slotting

Slotting is the process of placing goods into a warehouse in a way that ensures the most efficient storage
and picking of goods. Slotting determines optimal putaway parameters like storage type, storage section,
and bin type for a product. These planning values are stored in the product master and can be activated at
any stage, slotting automatically determines a storage concept for a product.

Product Parameters in Slotting

Parameter 1: Putaway control indicator
Parameter 2: Maximum quantity in storage type
Parameter 3: Storage section indicator
Parameter 4: Storage bin types

Slotting Process

The Condition Technique in Slotting

Prashanth Venkategowda Page No: 1

S/4 Souring & Procurement, SAP MM & EWM Consultant
Cell: +91 7760768986, Email: [email protected]
 SAP EWM – CLASS 32 – Slotting

Configuration Steps:
1. Edit Condition Table for Putaway Control Indicator = CUSLOTJ1
2. Edit Access Sequences for Putaway Control Indicator = AS04
3. Edit Condition Types for Putaway Control Indicator = PC04
4. Edit Determination Procedure for Putaway Control Indicator = G04_PC
5. Assign Determination Procedure = G04_PC to E055
6. Create Condition Maintenance Group = Z04_SLOT
7. Register Condition Maintenance Group = GCM to Z04_SLOT
8. Condition Maintenance for Slotting = /N/SCWM/GCMC

Prashanth Venkategowda Page No: 2

S/4 Souring & Procurement, SAP MM & EWM Consultant
Cell: +91 7760768986, Email: [email protected]
 SAP EWM – CLASS 32 – Slotting

Configuration Steps in Detailed:

1. Edit Condition Table for Putaway Control Indicator = CUSLOTJ1
SPRO-IMG- SCM Extended Warehouse Management- Extended Warehouse Management- Goods
Receipt Process- Slotting- Condition Technique- Condition Tables- Edit Condition Table for Putaway
Control Indicator

Enter condition Table as “CUSLOTJ1” & Description

Select Fields “CON_LGNUM” & “CON_MATGNR”

Drag these two fields to Right side and SAVE

Condition Table CUSLOTJ1 saved

Prashanth Venkategowda Page No: 3

S/4 Souring & Procurement, SAP MM & EWM Consultant
Cell: +91 7760768986, Email: [email protected]
 SAP EWM – CLASS 32 – Slotting

Then Make condition Table Active by clicking

Save again

2. Edit Access Sequences for Putaway Control Indicator = AS04

SPRO-IMG- SCM Extended Warehouse Management- Extended Warehouse Management- Goods
Receipt Process- Slotting- Condition Technique- Access Sequences- Edit Access Sequences for
Putaway Control Indicator

Go-To Change Mode

Click on New-Entries

Save, Access Sequence “AS04” saved

Then Access Sequence “AS04” and Double click on Accesses

Enter Access as “10” & Table as “CUSLOTJ1”

Then Click on Fields

Prashanth Venkategowda Page No: 4

S/4 Souring & Procurement, SAP MM & EWM Consultant
Cell: +91 7760768986, Email: [email protected]
 SAP EWM – CLASS 32 – Slotting

All the field of Condition Table “CUSLOTJ1”

And Enter Access type as “A” and Prioritization for Evaluation in Access as “10”

SAVE

3. Edit Condition Types for Putaway Control Indicator = PC04

SPRO-IMG- SCM Extended Warehouse Management- Extended Warehouse Management- Goods
Receipt Process- Slotting- Condition Technique- Condition Type- Edit Condition Types for Putaway
Control Indicator

Go-To New entries

Enter data as below and save

Prashanth Venkategowda Page No: 5

S/4 Souring & Procurement, SAP MM & EWM Consultant
Cell: +91 7760768986, Email: [email protected]
 SAP EWM – CLASS 32 – Slotting

4. Edit Determination Procedure for Putaway Control Indicator = G04_PC

SPRO-IMG- SCM Extended Warehouse Management- Extended Warehouse Management- Goods
Receipt Process- Slotting- Condition Technique- Determination Procedure- Edit Determination
Procedure for Putaway Control Indicator

Go-To change Mode and Click on new entries

Enter procedure as “G04_PC”

SAVE,

Select Procedure “G04_PC” and click on Elements of Determination Procedure

Prashanth Venkategowda Page No: 6

S/4 Souring & Procurement, SAP MM & EWM Consultant
Cell: +91 7760768986, Email: [email protected]
 SAP EWM – CLASS 32 – Slotting

Go-T0 new entries

Enter data as below

SAVE.

5. Assign Determination Procedure = G04_PC to E055

SPRO-IMG- SCM Extended Warehouse Management- Extended Warehouse Management- Goods
Receipt Process- Slotting- Condition Technique- Determination Procedure- Assign Determination
Procedure

Assign Procedure “G04_PC” to Warehouse “E055”

SAVE

6. Create Condition Maintenance Group = Z04_SLOT

SPRO-IMG- SCM Extended Warehouse Management- Extended Warehouse Management- Goods
Receipt Process- Slotting- Condition Technique- Settings for User Interface- Create Condition
Maintenance Group

Change mode and Click on new entries

Prashanth Venkategowda Page No: 7

S/4 Souring & Procurement, SAP MM & EWM Consultant
Cell: +91 7760768986, Email: [email protected]
 SAP EWM – CLASS 32 – Slotting

Then Select Condition Maintenance Group and double click on Condition Maintenance Group: Detail
GO-TO New entries
Enter data as below

Save, Condition Maintenance Group = Z04_SLOT created

7. Register Condition Maintenance Group = GCM to Z04_SLOT

SPRO-IMG- SCM Extended Warehouse Management- Extended Warehouse Management- Goods
Receipt Process- Slotting- Condition Technique- Settings for User Interface- Register Condition
Maintenance Group

Enter Maintenance context = GCM

Click OK
GO-TO New entries
Enter group as “Z04_SLOT”

Prashanth Venkategowda Page No: 8

S/4 Souring & Procurement, SAP MM & EWM Consultant
Cell: +91 7760768986, Email: [email protected]
 SAP EWM – CLASS 32 – Slotting

SAVE,

8. Condition Maintenance for Slotting = /N/SCWM/GCMC

SCM Extended Warehouse Management -Extended Warehouse Management - Master Data - Slotting
- Condition Maintenance for Slotting

Enter data as below and execute

Enter CCTV (Condition type) as PC04

And enter data as below
Condition Type - CCTC = PC04
Warehouse Number – WhN – W999
Putaway control indicator – PACI – T150
Then Save

Condition record saved

Prashanth Venkategowda Page No: 9

S/4 Souring & Procurement, SAP MM & EWM Consultant
Cell: +91 7760768986, Email: [email protected]
 SAP EWM – CLASS 32 – Slotting

WAREHOUSE = E055
Physical Inventory
Physical inventory Area = INV_GR01
Physical inventory procedure = HL & HS
Activity Area = IN15
Tolerance Group for Posting Differences &
Difference Analyzer = HIGH

STORAGE TYPE – 0150 (High Rack Storage)

Activity Area – AA15 & Assigned to Storage type 0150
Activity – PICK & PTWY
Availability Group-002, Stock type-F2 (SL Assigned AF02)
Storage type search sequence-P150, Putaway control Storage type – 9099,
Storage type – 9060, indicator-P150 Storage section-0001,
Storage section-0001, Bin – Bin – EXPEDIATE AREA GI
RAIL-DOOR Storage Section – 0001 Storage Section – 0002 (Product picked for
(Product can be received (Fast Moving) (Slow Moving) emergency deliveries)
from Rail)
Cross Docking:- Product Group type-CD, Product Group-
Bin – 0150-01-01 Bin – 0150-11-01
CD, Stock determination group-PP, Storage Type Search
Warehouse Process Type-2099
Warehouse Process Type-9060 Bin – 0150-01-02 Sequence-PK02, Bin – 0150-11-02 WPT Control Indicator - 61
WPT Control Indicator – 60 Bin – 0150-01-03 Bin – 0150-11-03 Storage Type Search Seq – PK02
Availability Group-002, Bin – 0150-11-04
Bin – 0150-01-04
Stock type-F2 (SL
Bin – 0150-01-05 Bin – 0150-11-05
Assigned AF02)
Bin – 0150-01-06 Bin – 0150-11-06

Storage type – 8099 (Represent work center)

Storage section-0001, Bin – EXP-PACKING
Work Center “EXVP” & Assigned to Bin “EXP-PACKING”

Transfer Posting SLOTTING Replenishment

Warehouse Process Type-4010 Condition Table = CUSLOTJ1 Fixed bin Storage Type – 0100
WPT Control Indicator - 61 Access Sequences = AS04 Fixed Bin – “Replenishment-BIN”
Storage Type Search Seq – PK02 Condition Types = PC04 Warehouse Process Type-3011
Stock Removal rule – FIFO Procedure = G04_PC Document Type – SRPL
ERP Document Type = DTR Maintenance Group = Z04_SLOT Item Type – SRPL
ERP Item Type = HSTP Storage Type Search Sequence – PK02
EWM Document Type = TWPR
EWM Item Type = TWPR

Prashanth Venkategowda Page No: 10

S/4 Souring & Procurement, SAP MM & EWM Consultant
Cell: +91 7760768986, Email: [email protected]