FQH44N10 — N-Channel QFET® MOSFET

FQH44N10
N-Channel QFET® MOSFET
100 V, 48 A, 39 mΩ

Description Features
This N-Channel enhancement mode power MOSFET is • 48 A, 100 V, RDS(on) = 39 m (Max.) @ VGS = 10 V,
produced using ON Semiconductor’s proprietary ID = 24 A
planar stripe and DMOS technology. This advanced
MOSFET technology has been especially tailored to • Low Gate Charge (Typ. 48 nC)
reduce on-state resistance, and to provide superior • Low Crss (Typ. 85 pF)
switching performance and high avalanche energy
strength. These devices are suitable for switched mode • 100% Avalanche Tested
power supplies, audio amplifier, DC motor control, and • 175C Maximum Junction Temperature Rating
variable switching power applications.

G
G
D TO-247
S
S
Absolute Maximum Ratings T C
o
= 25 C unless otherwise noted.

Symbol Parameter FQH44N10-F133 Unit

VDSS Drain-Source Voltage 100 V
ID Drain Current - Continuous (TC = 25°C) 48 A
- Continuous (TC = 100°C) 34 A
IDM Drain Current - Pulsed (Note 1) 192 A
VGSS Gate-Source Voltage  25 V
EAS Single Pulsed Avalanche Energy (Note 2) 530 mJ
IAR Avalanche Current (Note 1) 48 A
EAR Repetitive Avalanche Energy (Note 1) 18 mJ
dv/dt Peak Diode Recovery dv/dt (Note 3) 6.0 V/ns
PD Power Dissipation (TC = 25°C) 180 W
- Derate above 25°C 1.2 W/°C
TJ, TSTG Operating and Storage Temperature Range -55 to +175 °C
Maximum Lead Temperature for Soldering,
TL 300 °C
1/8" from Case for 5 Seconds

Thermal Characteristics
Symbol Parameter FQH44N10-F133 Unit
RJC Thermal Resistance, Junction-to-Case, Max. 0.83 °C/W
RCS Thermal Resistance, Case-to-Sink, Typ. 0.24 °C/W
RJA Thermal Resistance, Junction-to-Ambient, Max. 40 °C/W

©2008 Semiconductor Components Industries, LLC. Publication Order Number:

September-2017, Rev. 3 FQH44N10-F133/D
 FQH44N10 — N-Channel QFET® MOSFET
Package Marking and Ordering Information
Part Number Top Mark Package Packing Method Reel Size Tape Width Quantity
FQH44N10-F133 FQH44N10 TO-247 Tube N/A N/A 30 units

Electrical Characteristics T C
o
= 25 C unless otherwise noted.

Symbol Parameter Test Conditions Min Typ Max Unit


Off Characteristics
BVDSS Drain-Source Breakdown Voltage VGS = 0 V, ID = 250 A 100 -- -- V
BVDSS Breakdown Voltage Temperature
ID = 250 A, Referenced to 25°C -- 0.1 -- V/°C
/ TJ Coefficient
IDSS VDS = 100 V, VGS = 0 V -- -- 1 A
Zero Gate Voltage Drain Current
VDS = 80 V, TC = 150°C -- -- 10 A
IGSSF Gate-Body Leakage Current, Forward VGS = 25 V, VDS = 0 V -- -- 100 nA
IGSSR Gate-Body Leakage Current, Reverse VGS = -25 V, VDS = 0 V -- -- -100 nA

On Characteristics
VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250 A 2.0 -- 4.0 V
RDS(on) Static Drain-Source
VGS = 10 V, ID = 24 A -- 0.03 0.039 
On-Resistance
gFS Forward Transconductance VDS = 40 V, ID = 24 A -- 31 -- S

Dynamic Characteristics
Ciss Input Capacitance VDS = 25 V, VGS = 0 V, -- 1400 1800 pF
Coss Output Capacitance f = 1.0 MHz -- 425 550 pF
Crss Reverse Transfer Capacitance -- 85 110 pF

Switching Characteristics
td(on) Turn-On Delay Time -- 19 45 ns
VDD = 50 V, ID = 43.5 A,
tr Turn-On Rise Time -- 190 390 ns
RG = 25 
td(off) Turn-Off Delay Time -- 90 190 ns
(Note 4)
tf Turn-Off Fall Time -- 100 210 ns
Qg Total Gate Charge VDS = 80 V, ID = 43.5 A, -- 48 62 nC
Qgs Gate-Source Charge VGS = 10 V -- 9.0 -- nC
Qgd Gate-Drain Charge (Note 4) -- 24 -- nC

Drain-Source Diode Characteristics and Maximum Ratings

IS Maximum Continuous Drain-Source Diode Forward Current -- -- 48 A
ISM Maximum Pulsed Drain-Source Diode Forward Current -- -- 192 A
VSD Drain-Source Diode Forward Voltage VGS = 0 V, IS = 48 A -- -- 1.5 V
trr Reverse Recovery Time VGS = 0 V, IS = 43.5 A, -- 98 -- ns
Qrr Reverse Recovery Charge dIF / dt = 100 A/s -- 360 -- nC


1. Repetitive rating : pulse-width limited by maximum junction temperature.
2. L = 0.345 mH, IAS = 48 A, VDD = 25 V, RG = 25 Ω, starting TJ = 25°C.
3. ISD ≤ 43.5 A, di/dt ≤ 300 A/µs, VDD ≤ BVDSS, starting TJ = 25°C.
4. Essentially independent of operating temperature.

www.onsemi.com
2
 FQH44N10 — N-Channel QFET® MOSFET
Typical Characteristics

VGS
2
Top : 15.0 V 10
2
10 10.0 V
8.0 V
7.0 V

ID , Drain Current [A]

6.0 V
ID, Drain Current [A]

5.5 V
5.0 V 1
10 175℃
Bottom : 4.5 V

1
10
25℃
0
10 -55℃
※ Notes :
※ Notes :
1. 250μ s Pulse Test
1. VDS = 40V
2. TC = 25℃
2. 250μ s Pulse Test

0 -1
10 10
10
-1
10
0
10
1
2 4 6 8 10
VDS, Drain-Source Voltage [V] VGS , Gate-Source Voltage [V]

Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics

0.15
2
10
IDR , Reverse Drain Current [A]
Drain-Source On-Resistance

0.12

VGS = 10V
RDS(on) [],

1
0.09 10

VGS = 20V
0.06
0
10

0.03 ※ Notes :
175℃ 25℃ 1. VGS = 0V
※ Note : TJ = 25℃ 2. 250μ s Pulse Test

-1
0.00 10
0 30 60 90 120 150 180 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
ID , Drain Current [A] VSD , Source-Drain Voltage [V]

Figure 3. On-Resistance Variation vs. Figure 4. Body Diode Forward Voltage

Drain Current and Gate Voltage Variation vs. Source Current
and Temperature

4000 12
Ciss = Cgs + Cgd (Cds = shorted)
Coss = Cds + Cgd
3500 Crss = Cgd
10 VDS = 50V
VGS, Gate-Source Voltage [V]

3000 VDS = 80V

8
Capacitance [pF]

2500
Ciss ※ Notes :
2000 Coss 1. VGS = 0 V
6
2. f = 1 MHz

1500
4

1000 Crss

2
500
※ Note : ID = 43.5A

0 0
10
-1
10
0
10
1 0 10 20 30 40 50

VDS, Drain-Source Voltage [V] QG, Total Gate Charge [nC]

Figure 5. Capacitance Characteristics Figure 6. Gate Charge Characteristics

www.onsemi.com
3
 FQH44N10 — N-Channel QFET® MOSFET
Typical Characteristics (Continued)

Drain-Source Breakdown Voltage 1.2 3.0

2.5

Drain-Source On-Resistance
1.1
BVDSS, (Normalized)

RDS(ON), (Normalized)
2.0

1.0 1.5

1.0

0.9 ※ Notes :
1. VGS = 0 V
※ Notes :
2. ID = 250 μA 0.5
1. VGS = 10 V
2. ID = 21.75 A

0.8 0.0
-100 -50 0 50 100 150 200 -100 -50 0 50 100 150 200
o o
TJ, Junction Temperature [ C] TJ, Junction Temperature [ C]

Figure 7. Breakdown Voltage Variation Figure 8. On-Resistance Variation

vs. Temperature vs. Temperature

50
3
10
Operation in This Area
is Limited by R DS(on)
40

10 s
ID, Drain Current [A]

ID, Drain Current [A]

2
10 100 s
1 ms 30
10 ms
10
1 DC
20

0
10 ※ Notes : 10
o
1. TC = 25 C
o
2. TJ = 175 C
3. Single Pulse
-1
10 0
10
0 1
10 10
2 25 50 75 100 125 150 175

VDS, Drain-Source Voltage [V] TC, Case Temperature [℃]

Figure 9. Maximum Safe Operating Area Figure 10. Maximum Drain Current
vs. Case Temperature

0
10
ZθJC(t), Thermal Response [oC/W]

D = 0 .5

※ N o te s :
0 .2 1 . Z θ J C ( t) = 0 .8 3 ℃ /W M a x .
2 . D u t y F a c to r , D = t 1 / t 2
-1 3 . T J M - T C = P D M * Z θ J C ( t)
10 0 .1

0 .0 5
PDM
0 .0 2
0 .0 1 t1
s in g le p u ls e t2
-2
10

-5 -4 -3 -2 -1 0 1
10 10 10 10 10 10 10

t 1 , S q u a r e W a v e P u ls e D u r a t io n [ s e c ]

Figure 11. Transient Thermal Response Curve

www.onsemi.com
4
 FQH44N10 — N-Channel QFET® MOSFET
VGS
Same Type
50KΩ
as DUT Qg
12V 200nF
300nF 10V
VDS
VGS Qgs Qgd

DUT
IG = const.
3mA

Charge

Figure 12. Gate Charge Test Circuit & Waveform

RL VDS
VDS 90%

VGS VDD
RG

10%
VGS
V
10V
GS
DUT
td(on) tr td(off)
tf
t on t off

Figure 13. Resistive Switching Test Circuit & Waveforms

L 1 BVDSS
VDS EAS = ---- L IAS2 --------------------
2 BVDSS - VDD
BVDSS
ID
IAS
RG
VDD ID (t)

V
10V
GS
GS DUT VDD VDS (t)
tp
tp Time

Figure 14. Unclamped Inductive Switching Test Circuit & Waveforms

www.onsemi.com
5
 FQH44N10 — N-Channel QFET® MOSFET
DUT +

VDS

I SD
L

Driver
RG
Same Type
as DUT VDD

VGS • dv/dt controlled by RG

• ISD controlled by pulse period

Gate Pulse Width

VGS D = --------------------------
Gate Pulse Period 10V
( Driver )

IFM , Body Diode Forward Current

I SD
( DUT ) di/dt

IRM

Body Diode Reverse Current

VDS
( DUT ) Body Diode Recovery dv/dt

VSD VDD

Body Diode
Forward Voltage Drop

Figure 15. Peak Diode Recovery dv/dt Test Circuit & Waveforms

www.onsemi.com
6
 FQH44N10 — N-Channel QFET® MOSFET
Mechanical Dimensions

Figure 16. TO-247, Molded, 3-Lead, Jedec Variation AB

Package drawings are provided as a service to customers considering ON Semiconductor components. Drawings may change in
any manner without notice. Please note the revision and/or date on the drawing and contact a ON Semiconductor representative to
verify or obtain the most recent revision. Package specifications do not expand the terms of ON Semiconductor’s worldwide terms
and conditions, specif-ically the warranty therein, which covers ON Semiconductor products.

www.onsemi.com
7
 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free ON Semiconductor Website: www.onsemi.com
Literature Distribution Center for ON Semiconductor USA/Canada
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Europe, Middle East and Africa Technical Support: Order Literature: http://www.onsemi.com/orderlit
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Phone: 421 33 790 2910
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Japan Customer Focus Center For additional information, please contact your local
Email: [email protected] Phone: 81−3−5817−1050 Sales Representative

❖ © Semiconductor Components Industries, LLC www.onsemi.com