Scribd Logo
Upload

Welcome to Scribd!

  • 10 views

    2019期末考考古題目

    Uploaded by

    1 11
    The inner circle of a gear is called the pitch circle. Helical gear sets are utilized in automotive transmissions, for which quietness is a priority. Worm gear sets are mostly used when the speed ratios of the two shafts are quite high. The tip of the gear (pinion) is more likely to have the interference. To analyze the surface-contact stress in the gearset, Hertz stress equation can be applied. A clutch permits smooth gradual connection and disconnection of two members having a common axis of rotation? One of members is fixed. Mating crossed helical gears must have the same pressure angle and circular pitch in the normal direction. The angle is known as pressure angle, which is measured in the acting resultant force direction

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    2019期末考考古題目

    Uploaded by

    1 11
    10 views2 pages
    The inner circle of a gear is called the pitch circle. Helical gear sets are utilized in automotive transmissions, for which quietness is a priority. Worm gear sets are mostly used when the speed ratios of the two shafts are quite high. The tip of the gear (pinion) is more likely to have the interference. To analyze the surface-contact stress in the gearset, Hertz stress equation can be applied. A clutch permits smooth gradual connection and disconnection of two members having a common axis of rotation? One of members is fixed. Mating crossed helical gears must have the same pressure angle and circular pitch in the normal direction. The angle is known as pressure angle, which is measured in the acting resultant force direction

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The inner circle of a gear is called the pitch circle. Helical gear sets are utilized in automotive transmissions, for which quietness is a priority. Worm gear sets are mostly used when the speed ratios of the two shafts are quite high. The tip of the gear (pinion) is more likely to have the interference. To analyze the surface-contact stress in the gearset, Hertz stress equation can be applied. A clutch permits smooth gradual connection and disconnection of two members having a common axis of rotation? One of members is fixed. Mating crossed helical gears must have the same pressure angle and circular pitch in the normal direction. The angle is known as pressure angle, which is measured in the acting resultant force direction

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    10 views2 pages

    2019期末考考古題目

    Uploaded by

    1 11
    The inner circle of a gear is called the pitch circle. Helical gear sets are utilized in automotive transmissions, for which quietness is a priority. Worm gear sets are mostly used when the speed ratios of the two shafts are quite high. The tip of the gear (pinion) is more likely to have the interference. To analyze the surface-contact stress in the gearset, Hertz stress equation can be applied. A clutch permits smooth gradual connection and disconnection of two members having a common axis of rotation? One of members is fixed. Mating crossed helical gears must have the same pressure angle and circular pitch in the normal direction. The angle is known as pressure angle, which is measured in the acting resultant force direction

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Part I: Close Book

    1. (20%) Please answer the following questions:


    (1) The inner circle of a gear is called __________.
    (2) __________ gear sets are utilized in automotive transmissions, for which quietness is a
    priority.
    (3) __________ gear sets are mostly used when the speed ratios of the two shafts are
    quite high.
    (4) The tip of the ___________ (gear or pinion) is more likely to have the interference.
    (5) To analyze the surface-contact stress in the gearset, __________ stress equation can
    be applied.
    (6) __________ permits smooth gradual connection and disconnection of two members
    having a common axis of rotation? One of members is fixed.
    (7) Mating crossed helical gears must have the same pressure angle and circular pitch
    in the __________ direction.
    (8) The angle is known as __________, which is measured in the acting resultant force
    direction opposite to the direction of rotation of the driver.
    (9) When power is transmitted by a pair of helical gears, both shafts are subjected a
    __________ load, which can be eliminated by using double helical or herringbone
    gears.
    (10) Strength capacity, wear capacity, and __________ capacity are considered in worm
    gear set design.
    (11) The coefficient of friction between worm and gear are recommended by AGMA
    based on __________ velocity.
    (12) The simplest of all hub-to-shaft attachments is accomplished with __________
    wherein the hub bore is slightly smaller than the shaft diameter.
    (13) The clutches and brakes considered in the textbook are all of the __________ type,
    depending on sliding between two surfaces.
    (14) Toothed belts, also known as __________, require toothed wheel and are normally
    used for many applications like driving an engine camshaft from the crankshaft.
    (15) In the chain drives, there are two main components. One is the chain and another is
    the __________.
    (16) Please explain self-energized and self-deenergized brakes.
    (17) The centrifugal force isn't considered in band brake analysis. Explain why it should
    be considered in belt drives?
    (18) For involute spur gear, d is the diameter of the pitch circle, d b is the diameter of the
    base circle, and Φ is the pressure angle in the spur gear. Please write down the
    relationship for the above three numbers (d, d b, Φ).
    2𝐹𝑓(𝑟𝑜 3 −𝑟𝑖 3 )
    2. (10%) (a) Which assumption (uniform pressure [ 𝑇= ] or uniform wear
    3(𝑟𝑜 2 −𝑟𝑖 2 )
    𝑟𝑜 +𝑟𝑖
    rate [ 𝑇 = 𝐹𝑓( ) ]) for a disk clutch with a single friction interface (inner radius:
    2
    ri; outside radius: ro; coefficient of friction: f; total force: F) will generate more torque
    under the same total force and c.o.f? Give your answer and why. (b) Under uniform
    rate assumption, the torque generated by the disk clutches is
    𝑇 = 𝜋𝑝𝑚𝑎𝑥 𝑟𝑖 𝑓(𝑟𝑜 2 − 𝑟𝑖 2 ) (maximum pressure pmax). Show the maximum torque
    1
    occurs for disk clutches under uniform wear rate assumption at 𝑟𝑖 = 𝑟 when the
    √3 𝑜
    outer diameter is fixed.
    3. (3%) In the figure, a pair of bevel gears is drawn. The angles αp and αg are defined
    as pitch angle for pinion and gear, respectively. The sum of these two angles is
    defined as Σ (Σ=αp+αg), which is not 90 degree. In addition, the number of tooth
    for the pinion is Np and the number of tooth for the gear is Ng. (a) Please prove
    𝑠𝑖𝑛𝛴 𝑠𝑖𝑛𝛴
    𝑡𝑎𝑛𝛼𝑝 = and 𝑡𝑎𝑛𝛼𝑔 =
    (𝑁𝑔 ⁄𝑁𝑝 )+𝑐𝑜𝑠Σ (𝑁𝑝 ⁄𝑁𝑔 )+𝑐𝑜𝑠Σ
    (b) Please also show speed ratio=tan αp=cot αg while Σ=90°

    Answer
    1. pinion
    2. Helical
    3. Worm
    4. gear
    5. Hertz
    6. Clutch
    7. normal
    8. pressure angle
    9. thrust
    10. thermal
    11. sliding
    12. interference fit
    13. friction
    14. timing belts
    15. sprocket

    You might also like