Scribd
Upload
55 views15 pages

03.3 - Member Connection For Supporting of Grating Between Grid 03 and 2C Verification

This document provides design details for a structural connection between beams and columns. Key details include: - The project name, number, author, date and design code. - Material properties for steel and concrete. - Geometric properties and forces for beams and columns. - Load effects, stress checks and strain checks for various cross sections and connection elements. - Weld checks showing stress levels meet requirements. - Overall the connection design was found to be adequate based on stress and strain checks of critical components.

Uploaded by

kheang amg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
55 views15 pages

03.3 - Member Connection For Supporting of Grating Between Grid 03 and 2C Verification

This document provides design details for a structural connection between beams and columns. Key details include: - The project name, number, author, date and design code. - Material properties for steel and concrete. - Geometric properties and forces for beams and columns. - Load effects, stress checks and strain checks for various cross sections and connection elements. - Weld checks showing stress levels meet requirements. - Overall the connection design was found to be adequate based on stress and strain checks of critical components.

Uploaded by

kheang amg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

Project:

Project no:
Author:

Project data
Project name
Project number
Author
Description
Date 31-Jul-23
Design code EN

Material
Steel S 235
Concrete C25/30

1 / 15
Project:
Project no:
Author:

Project item Connection for structure

Design
Name Connection for structure
Description
Analysis Stress, strain/ simplified loading

Beams and columns


β – Direction γ - Pitch α - Rotation Offset ex Offset ey Offset ez
Name Cross-section Forces in
[°] [°] [°] [mm] [mm] [mm]
C 10 - U180 180.0 0.0 0.0 0 0 0 Node
B 10 - U180 0.0 45.0 180.0 0 0 0 Node

2 / 15
Project:
Project no:
Author:

3 / 15
Project:
Project no:
Author:

Cross-sections
Name Material
10 - U180 S 235

Cross-sections
Name Material Drawing

10 - U180 S 235

Load effects (equilibrium not required)


N Vy Vz Mx My Mz
Name Member
[kN] [kN] [kN] [kNm] [kNm] [kNm]
LE1 C -30.2 0.0 -13.1 0.0 7.8 0.0
C 0.0 0.0 0.0 0.0 0.0 0.0

4 / 15
Project:
Project no:
Author:

Check

Summary
Name Value Status
Analysis 100.0% OK
Plates 0.0 < 5.0% OK
Welds 91.8 < 100% OK
Buckling Not calculated

Plates
Thickness σEd εPl σcEd
Name Loads Status
[mm] [MPa] [%] [MPa]
C-bfl 1 5.0 LE1 202.8 0.0 0.0 OK
C-tfl 1 5.0 LE1 125.1 0.0 0.0 OK
C-w 1 5.0 LE1 197.0 0.0 0.0 OK
B-bfl 1 5.0 LE1 172.6 0.0 0.0 OK
B-tfl 1 5.0 LE1 170.4 0.0 0.0 OK
B-w 1 5.0 LE1 224.1 0.0 0.0 OK
STIFF1a 5.0 LE1 65.2 0.0 0.0 OK
STIFF1b 5.0 LE1 117.2 0.0 0.0 OK

Design data

fy εlim
Material
[MPa] [%]
S 235 235.0 5.0

5 / 15
Project:
Project no:
Author:

Overall check, LE1

Strain check, LE1

6 / 15
Project:
Project no:
Author:

Equivalent stress, LE1

Welds (Plastic redistribution)


Throat th. Length σw,Ed εPl σ⏊ τ|| τ⏊ Ut Utc
Item Edge Loads Status
[mm] [mm] [MPa] [%] [MPa] [MPa] [MPa] [%] [%]
C-bfl 1 B-bfl 1 ◢4.0 68 LE1 330.4 0.0 92.6 72.2 -168.3 91.8 55.0 OK
C-bfl 1 B-tfl 1 ◢4.0 68 LE1 208.2 0.0 -192.1 18.8 -42.3 74.1 31.4 OK
C-bfl 1 B-w 1 ◢4.0 247 LE1 277.5 0.0 -71.9 142.5 -60.2 77.1 25.5 OK
C-bfl 1 STIFF1a ◢4.0◣ 65 LE1 44.4 0.0 18.9 -12.3 19.7 12.3 8.2 OK
◢4.0◣ 65 LE1 46.0 0.0 -21.0 -5.6 22.9 12.8 9.5 OK
C-w 1 STIFF1a ◢4.0◣ 170 LE1 25.8 0.0 15.4 -11.2 4.0 7.2 5.5 OK
◢4.0◣ 170 LE1 38.2 0.0 1.7 -22.0 -1.7 10.6 7.9 OK
C-tfl 1 STIFF1a ◢4.0◣ 65 LE1 13.3 0.0 -10.4 -0.4 -4.8 4.0 3.0 OK
◢4.0◣ 65 LE1 15.3 0.0 10.2 -4.8 -4.6 4.3 3.1 OK
C-bfl 1 STIFF1b ◢4.0◣ 65 LE1 40.3 0.0 0.0 -23.2 -1.9 11.2 11.1 OK
◢4.0◣ 65 LE1 62.3 0.0 -19.2 -26.1 22.1 17.3 11.4 OK
C-w 1 STIFF1b ◢4.0◣ 170 LE1 46.9 0.0 -6.1 -26.8 -1.3 13.0 10.7 OK
◢4.0◣ 170 LE1 41.7 0.0 0.4 -24.1 1.1 11.6 9.4 OK
C-tfl 1 STIFF1b ◢4.0◣ 65 LE1 32.5 0.0 -9.5 -16.0 -8.2 9.0 6.9 OK
◢4.0◣ 65 LE1 23.9 0.0 17.1 -5.7 -7.8 6.6 5.2 OK

Design data

βw σw,Rd 0.9 σ
[-] [MPa] [MPa]
S 235 0.80 360.0 259.2

7 / 15
Project:
Project no:
Author:

Detailed result for C-bfl 1 B-bfl 1


Weld resistance check (EN 1993-1-8 4.5.3.2)

σw,Rd = fu /(βw γM 2 ) = 2 + 3(τ 2 + τ 2 )]0.5 =


σw,Ed = [σ⊥
​ ​ ​ ​
360.0 MPa ≥ ​

⊥
​

∥ ​ ​
330.4 MPa

σ⊥,Rd = 0.9fu /γM 2 =


​ ​ ​
259.2 MPa ≥ ∣σ⊥ ∣ =
​
92.6 MPa

where:
fu = 360.0 MPa – Ultimate strength
​

βw = 0.80
​ – appropriate correlation factor taken from Table 4.1
γM 2 = 1.25 ​ – Safety factor

Stress utilization
∣σ⊥ ∣
Ut = max( σσw,Ed
​

w,Rd
; ​

​
​

σ⊥,Rd
​

​
​ )= 91.8 %

Detailed result for C-bfl 1 B-tfl 1


Weld resistance check (EN 1993-1-8 4.5.3.2)

σw,Rd = fu /(βw γM 2 ) = 2 + 3(τ 2 + τ 2 )]0.5 =


σw,Ed = [σ⊥
​ ​ ​ ​
360.0 MPa ≥ ​

⊥
​

∥ ​ ​
208.2 MPa

σ⊥,Rd = 0.9fu /γM 2 =


​ ​ ​
259.2 MPa ≥ ∣σ⊥ ∣ =
​
192.1 MPa

where:
fu = 360.0 MPa – Ultimate strength
​

βw = 0.80
​ – appropriate correlation factor taken from Table 4.1
γM 2 = 1.25 ​ – Safety factor

Stress utilization
∣σ⊥ ∣
Ut = max( σσw,Ed
​

w,Rd
; ​

​
​

σ⊥,Rd
​

​
​ )= 74.1 %

8 / 15
Project:
Project no:
Author:

Detailed result for C-bfl 1 B-w 1


Weld resistance check (EN 1993-1-8 4.5.3.2)

σw,Rd = fu /(βw γM 2 ) = 2 + 3(τ 2 + τ 2 )]0.5 =


σw,Ed = [σ⊥
​ ​ ​ ​
360.0 MPa ≥ ​

⊥
​

∥ ​ ​
277.5 MPa

σ⊥,Rd = 0.9fu /γM 2 =


​ ​ ​
259.2 MPa ≥ ∣σ⊥ ∣ =
​
71.9 MPa

where:
fu = 360.0 MPa – Ultimate strength
​

βw = 0.80
​ – appropriate correlation factor taken from Table 4.1

γM 2 = 1.25 ​ – Safety factor

Stress utilization
∣σ⊥ ∣
Ut = max( σσw,Ed
​

w,Rd
; ​

​
​

σ⊥,Rd
​

​
​ )= 77.1 %

Detailed result for C-bfl 1 STIFF1a


Weld resistance check (EN 1993-1-8 4.5.3.2)

σw,Rd = fu /(βw γM 2 ) = 2 + 3(τ 2 + τ 2 )]0.5 =


σw,Ed = [σ⊥
​ ​ ​ ​
360.0 MPa ≥ ​

⊥
​

∥ ​ ​
44.4 MPa

σ⊥,Rd = 0.9fu /γM 2 =


​ ​ ​
259.2 MPa ≥ ∣σ⊥ ∣ =
​
18.9 MPa

where:
fu = 360.0 MPa – Ultimate strength
​

βw = 0.80
​ – appropriate correlation factor taken from Table 4.1

γM 2 = 1.25 ​ – Safety factor

Stress utilization
∣σ⊥ ∣
Ut = max( σσw,Ed
​

w,Rd
; ​

​
​

σ⊥,Rd
​

​
​ )= 12.3 %

Weld resistance check (EN 1993-1-8 4.5.3.2)

σw,Rd = fu /(βw γM 2 ) = 2 + 3(τ 2 + τ 2 )]0.5 =


σw,Ed = [σ⊥
​ ​ ​ ​
360.0 MPa ≥ ​

⊥
​

∥ ​ ​
46.0 MPa

σ⊥,Rd = 0.9fu /γM 2 =


​ ​ ​
259.2 MPa ≥ ∣σ⊥ ∣ =
​
21.0 MPa

where:
fu = 360.0 MPa – Ultimate strength
​

βw = 0.80
​ – appropriate correlation factor taken from Table 4.1

γM 2 = 1.25 ​ – Safety factor

9 / 15
Project:
Project no:
Author:

Stress utilization
∣σ⊥ ∣
Ut = max( σσw,Ed
​

w,Rd
; ​

​
​

σ⊥,Rd
​

​
​ )= 12.8 %

Detailed result for C-w 1 STIFF1a


Weld resistance check (EN 1993-1-8 4.5.3.2)

σw,Rd = fu /(βw γM 2 ) = 2 + 3(τ 2 + τ 2 )]0.5 =


σw,Ed = [σ⊥
​ ​ ​ ​
360.0 MPa ≥ ​

⊥
​

∥ ​ ​
25.8 MPa

σ⊥,Rd = 0.9fu /γM 2 =


​ ​ ​
259.2 MPa ≥ ∣σ⊥ ∣ =
​
15.4 MPa

where:
fu = 360.0 MPa – Ultimate strength
​

βw = 0.80
​ – appropriate correlation factor taken from Table 4.1

γM 2 = 1.25 ​ – Safety factor

Stress utilization
∣σ⊥ ∣
Ut = max( σσw,Ed
​

w,Rd
; ​

​
​

σ⊥,Rd
​

​
​ )= 7.2 %

Weld resistance check (EN 1993-1-8 4.5.3.2)

σw,Rd = fu /(βw γM 2 ) = 2 + 3(τ 2 + τ 2 )]0.5 =


σw,Ed = [σ⊥
​ ​ ​ ​
360.0 MPa ≥ ​

⊥
​

∥ ​ ​
38.2 MPa

σ⊥,Rd = 0.9fu /γM 2 =


​ ​ ​
259.2 MPa ≥ ∣σ⊥ ∣ =
​
1.7 MPa

where:
fu = 360.0 MPa – Ultimate strength
​

βw = 0.80
​ – appropriate correlation factor taken from Table 4.1

γM 2 = 1.25 ​ – Safety factor

Stress utilization
∣σ⊥ ∣
Ut = max( σσw,Ed
​

w,Rd
; ​

​
​

σ⊥,Rd
​

​
​ )= 10.6 %

10 / 15
Project:
Project no:
Author:

Detailed result for C-tfl 1 STIFF1a


Weld resistance check (EN 1993-1-8 4.5.3.2)

σw,Rd = fu /(βw γM 2 ) = 2 + 3(τ 2 + τ 2 )]0.5 =


σw,Ed = [σ⊥
​ ​ ​ ​
360.0 MPa ≥ ​

⊥
​

∥ ​ ​
13.3 MPa

σ⊥,Rd = 0.9fu /γM 2 =


​ ​ ​
259.2 MPa ≥ ∣σ⊥ ∣ =
​
10.4 MPa

where:
fu = 360.0 MPa – Ultimate strength
​

βw = 0.80
​ – appropriate correlation factor taken from Table 4.1

γM 2 = 1.25 ​ – Safety factor

Stress utilization
∣σ⊥ ∣
Ut = max( σσw,Ed
​

w,Rd
; ​

​
​

σ⊥,Rd
​

​
​ )= 4.0 %

Weld resistance check (EN 1993-1-8 4.5.3.2)

σw,Rd = fu /(βw γM 2 ) = 2 + 3(τ 2 + τ 2 )]0.5 =


σw,Ed = [σ⊥
​ ​ ​ ​
360.0 MPa ≥ ​

⊥
​

∥ ​ ​
15.3 MPa

σ⊥,Rd = 0.9fu /γM 2 =


​ ​ ​
259.2 MPa ≥ ∣σ⊥ ∣ =
​
10.2 MPa

where:
fu = 360.0 MPa – Ultimate strength
​

βw = 0.80
​ – appropriate correlation factor taken from Table 4.1

γM 2 = 1.25 ​ – Safety factor

Stress utilization
∣σ⊥ ∣
Ut = max( σσw,Ed
​

w,Rd
; ​

​
​

σ⊥,Rd
​

​
​ )= 4.3 %

11 / 15
Project:
Project no:
Author:

Detailed result for C-bfl 1 STIFF1b


Weld resistance check (EN 1993-1-8 4.5.3.2)

σw,Rd = fu /(βw γM 2 ) = 2 + 3(τ 2 + τ 2 )]0.5 =


σw,Ed = [σ⊥
​ ​ ​ ​
360.0 MPa ≥ ​

⊥
​

∥ ​ ​
40.3 MPa

σ⊥,Rd = 0.9fu /γM 2 =


​ ​ ​
259.2 MPa ≥ ∣σ⊥ ∣ =
​
0.0 MPa

where:
fu = 360.0 MPa – Ultimate strength
​

βw = 0.80
​ – appropriate correlation factor taken from Table 4.1
γM 2 = 1.25 ​ – Safety factor

Stress utilization
∣σ⊥ ∣
Ut = max( σσw,Ed
​

w,Rd
; ​

​
​

σ⊥,Rd
​

​
​ )= 11.2 %

Weld resistance check (EN 1993-1-8 4.5.3.2)

σw,Rd = fu /(βw γM 2 ) = 2 + 3(τ 2 + τ 2 )]0.5 =


σw,Ed = [σ⊥
​ ​ ​ ​
360.0 MPa ≥ ​

⊥
​

∥ ​ ​
62.3 MPa

σ⊥,Rd = 0.9fu /γM 2 =


​ ​ ​
259.2 MPa ≥ ∣σ⊥ ∣ =
​
19.2 MPa

where:
fu = 360.0 MPa – Ultimate strength
​

βw = 0.80
​ – appropriate correlation factor taken from Table 4.1

γM 2 = 1.25 ​ – Safety factor

Stress utilization
∣σ⊥ ∣
Ut = max( σσw,Ed
​

w,Rd
; ​

​
​

σ⊥,Rd
​

​
​ )= 17.3 %

12 / 15
Project:
Project no:
Author:

Detailed result for C-w 1 STIFF1b


Weld resistance check (EN 1993-1-8 4.5.3.2)

σw,Rd = fu /(βw γM 2 ) = 2 + 3(τ 2 + τ 2 )]0.5 =


σw,Ed = [σ⊥
​ ​ ​ ​
360.0 MPa ≥ ​ ​

⊥ ∥ ​ ​
46.9 MPa

σ⊥,Rd = 0.9fu /γM 2 =


​ ​ ​
259.2 MPa ≥ ∣σ⊥ ∣ =
​
6.1 MPa

where:
fu = 360.0 MPa – Ultimate strength
​

βw = 0.80
​ – appropriate correlation factor taken from Table 4.1

γM 2 = 1.25 ​ – Safety factor

Stress utilization
∣σ⊥ ∣
Ut = max( σσw,Ed
​

w,Rd
; ​

​
​

σ⊥,Rd
​

​
​ )= 13.0 %

Weld resistance check (EN 1993-1-8 4.5.3.2)

σw,Rd = fu /(βw γM 2 ) = 2 + 3(τ 2 + τ 2 )]0.5 =


σw,Ed = [σ⊥
​ ​ ​ ​
360.0 MPa ≥ ​ ​

⊥ ∥ ​ ​
41.7 MPa

σ⊥,Rd = 0.9fu /γM 2 =


​ ​ ​
259.2 MPa ≥ ∣σ⊥ ∣ =
​
0.4 MPa

where:
fu = 360.0 MPa – Ultimate strength
​

βw = 0.80
​ – appropriate correlation factor taken from Table 4.1

γM 2 = 1.25 ​ – Safety factor

Stress utilization
∣σ⊥ ∣
Ut = max( σσw,Ed
​

w,Rd
; ​

​
​

σ⊥,Rd
​

​
​ )= 11.6 %

13 / 15
Project:
Project no:
Author:

Detailed result for C-tfl 1 STIFF1b


Weld resistance check (EN 1993-1-8 4.5.3.2)

σw,Rd = fu /(βw γM 2 ) = 2 + 3(τ 2 + τ 2 )]0.5 =


σw,Ed = [σ⊥
​ ​ ​ ​
360.0 MPa ≥ ​

⊥​

∥ ​ ​
32.5 MPa

σ⊥,Rd = 0.9fu /γM 2 =


​ ​ ​
259.2 MPa ≥ ∣σ⊥ ∣ =
​
9.5 MPa

where:
fu = 360.0 MPa – Ultimate strength
​

βw = 0.80
​ – appropriate correlation factor taken from Table 4.1

γM 2 = 1.25 ​ – Safety factor

Stress utilization
∣σ⊥ ∣
Ut = max( σσw,Ed
​

w,Rd
; ​

​
​

σ⊥,Rd
​

​
​ )= 9.0 %

Weld resistance check (EN 1993-1-8 4.5.3.2)

σw,Rd = fu /(βw γM 2 ) = 2 + 3(τ 2 + τ 2 )]0.5 =


σw,Ed = [σ⊥
​ ​ ​ ​
360.0 MPa ≥ ​

⊥​

∥ ​ ​
23.9 MPa

σ⊥,Rd = 0.9fu /γM 2 =


​ ​ ​
259.2 MPa ≥ ∣σ⊥ ∣ =
​
17.1 MPa

where:
fu = 360.0 MPa – Ultimate strength
​

βw = 0.80
​ – appropriate correlation factor taken from Table 4.1

γM 2 = 1.25 ​ – Safety factor

Stress utilization
∣σ⊥ ∣
Ut = max( σσw,Ed
​

w,Rd
; ​

​
​

σ⊥,Rd
​

​
​ )= 6.6 %

Buckling
Buckling analysis was not calculated.

Code settings
Item Value Unit Reference
γM0 1.00 - EN 1993-1-1: 6.1
γM1 1.00 - EN 1993-1-1: 6.1
γM2 1.25 - EN 1993-1-1: 6.1
γM3 1.25 - EN 1993-1-8: 2.2
γC 1.50 - EN 1992-1-1: 2.4.2.4
γInst 1.20 - EN 1992-4: Table 4.1
Joint coefficient βj 0.67 - EN 1993-1-8: 6.2.5
Effective area - influence of mesh size 0.10 -

14 / 15
Project:
Project no:
Author:

Item Value Unit Reference


Friction coefficient - concrete 0.25 - EN 1993-1-8
Friction coefficient in slip-resistance 0.30 - EN 1993-1-8 tab 3.7
Limit plastic strain 0.05 - EN 1993-1-5
Weld stress evaluation Plastic redistribution
Detailing Yes
Distance between bolts [d] 2.20 - EN 1993-1-8: tab 3.3
Distance between bolts and edge [d] 1.20 - EN 1993-1-8: tab 3.3
Concrete breakout resistance check Both EN 1992-4: 7.2.1.4 and 7.2.2.5
Use calculated αb in bearing check. Yes EN 1993-1-8: tab 3.4
Cracked concrete Yes EN 1992-4
Local deformation check Yes CIDECT DG 1, 3 - 1.1
Local deformation limit 0.03 - CIDECT DG 1, 3 - 1.1
Geometrical nonlinearity (GMNA) Yes Analysis with large deformations for hollow section joints
Braced system No EN 1993-1-8: 5.2.2.5

15 / 15

You might also like