Scribd
Upload
65 views

Wireless Health Monitoring System Using Arduino

This document describes a wireless health monitoring system using an Arduino microcontroller. The system aims to continuously monitor patients' temperature and heart rate to address disadvantages of manual monitoring like long measuring times and low precision. Sensors measure patients' physiological parameters, which are received by the microcontroller and transmitted wirelessly to a receiving module. The system allows for continuous, remote monitoring of patients' vital signs to support efficient healthcare.

Uploaded by

Deepika
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
65 views

Wireless Health Monitoring System Using Arduino

This document describes a wireless health monitoring system using an Arduino microcontroller. The system aims to continuously monitor patients' temperature and heart rate to address disadvantages of manual monitoring like long measuring times and low precision. Sensors measure patients' physiological parameters, which are received by the microcontroller and transmitted wirelessly to a receiving module. The system allows for continuous, remote monitoring of patients' vital signs to support efficient healthcare.

Uploaded by

Deepika
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/346623933

WIRELESS HEALTH MONITORING SYSTEM USING ARDUINO

Thesis · May 2016


DOI: 10.13140/RG.2.2.22206.72005

CITATIONS READS

0 1,349

5 authors, including:

Dr Padmavathy N
Vishnu Institute of Technology
30 PUBLICATIONS 214 CITATIONS

SEE PROFILE

Some of the authors of this publication are also working on these related projects:

Green Communication: An Emerging Telecommunication Technology-Its Research Challenges, Techniques and Applications View project

Reliability Measures and Evaluation of Underwater Mobile Ad Hoc Network View project

All content following this page was uploaded by Dr Padmavathy N on 04 December 2020.

The user has requested enhancement of the downloaded file.


WIRELESS HEALTH MONITORING SYSTEM USING ARDUINO

D. Navya, B. Bhagya Lakshmi, B. Kumar Swamy, Ch. Udaya Kiran, N. Padmavathy


Department of ECE, Vishnu Institute of Technology, Bhimavaram, Andhra Pradesh

ABSTRACT
In the past decades, the requirement in the healthcare field has been rising rapidly, and therefore the need of a
well-equipped, efficient monitoring system for health care centres has become a topic of researchers’ interest. In
general, most of the hospitals, manual inspections are done in order to collect the records of patient’s condition.
Continuous and frequent monitoring of patients is required based on their health state. This leads to disadvantages
like long measuring time, low monitor precision, and deployment of more manpower.

The aim of our project is to design a wireless health monitoring system using Arduino microcontroller.
In this project, the doctor can continuously monitor temperature and heart rate of patients. The proposed system
comprises of a transmitting module, receiving module and a microcontroller, where the transmitting module
continuously transmits the patient's physiological parameters like heart rate and temperature through use of
appropriate sensors. The sensors are used to sense the information, the microcontroller is used to receive the data
from the sensor and finally the controlled information is sent to the receiver. This monitoring system is able to
measure, analyze, and store physiological parameters of the patients' continuously.

Keywords: Physiological parameters; Sensors; Arduino Microcontroller; Transmitter; Receiver; Patient


Monitoring.

View publication stats

You might also like