SAMSUNG SMARTCAM

User Manual SNH-E6440BN

0678 !

Downloaded from www.Manualslib.com manuals search engine

 SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.

Operational Description
The operational description shall fulfil the requirements of Rule Part 2.1033(b)(4). The rule
Samsung SmartCam part requires, "A brief description of the circuit functions of the device along with a
statement describing how the device operates. This statement should contain a
User Manual description of the ground system and antenna, if any, used with the device".
The above requirement has been further interpreted by the FCC to mean that the
description shall:
Copyright
a. be an operational or technical description of how the device operates, is modulated
©2014 Samsung Techwin Co., Ltd. All rights reserved. and meets requirements;
b. describe the EUT completely. What is it (in plain English as well as technical terms)?
Trademark
Give a clear, concise functional description of device operation.
is the registered logo of Samsung Techwin Co., Ltd. c. always describe the signal, such as modulation type, pulse repetition rate, signal type
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
and information being sent. Describe all modulation types and all data rates.
Other trademarks mentioned in this manual are the registered trademark of their
respective company. Instructions & Warranty
The manufacturer is not responsible for any loss or radio/TV interference caused by
unauthorized modification of the product.
Restriction
Such modification will void the warranty of the product as well as the user’s right of use.
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no
circumstances, this document shall be reproduced, distributed or changed, partially or
wholly, without formal authorization of Samsung Techwin.
WARNING
o The product must be assembled and installed by an adult.
Disclaimer o Before using, read all instructions on this manual thoroughly and follow operational
Samsung Techwin makes the best to verify the integrity and correctness of the contents instructions, warnings on this manual and printed on the product.
in this document, but no formal guarantee shall be provided. Use of this document o To avoid entangled power cord, do not place it around the baby bed or other infant
and the subsequent results shall be entirely on the user’s own responsibility. Samsung furniture. Keep this product and its power cord out of children’s reach.
Techwin reserves the right to change the contents of this document without prior notice.

Downloaded from www.Manualslib.com manuals search engine

 o Especially, the power cord should be installed carefully while keeping it out of
children’s reach. Contents
o Never use the product near bath tub, sink, washing machine and in wet basement to
avoid moisture.
o The product is designed for outdoor use. GETTING STARTED
o The product is not designed for medical monitoring, and requires a grown-up’s
protective supervision on its use. Features ……………………………………………………… 4
o To avoid overheating of the product, do not expose the product to direct sunlight; do
What’s Included ……………………………………………… 5
not install or use near a heat source such as heater, radiator, cooking devices (ex:
electric stove or oven) and other warming devices (ex: audio amplifier, TV, etc.). Part Name and Function …………………………………… 6
o Make sure to keep ventilated while using the product.
Avoid pillar or furniture that may block ventilation, when installing the product.
o Make sure to use the power adaptor provided. If used with unidentified adaptor, it INSTALLATION & NETWORK CONNECTION
may damage the product. The power adaptor must be used with regular household
electric supply. Installation …………………………………………………… 8
o Avoid sharp, pointed objects around the adaptor’s cable, not to damage the cable.
o Be warned and never hold the cable’s stripped part when connecting / disconnecting
Network Connection and Settings …………………………… 10
the adaptor to/from the wall outlet.
o To avoid entangled cable lines, avoid using cable extension for adaptor’s power cord.
o Do not use the camera cable for other purposes. MONITORING
o Install the camera cable out of the reach of children.
o The product’s servicing is allowed only to authorized Samsung Techwin’s service
Registration …………………………………………………… 12
personnel. Live Video …………………………………………………… 17
o When using the product for children’s care, be careful to keep the product out of
Setup ………………………………………………………… 20
children’s reach.
o The product partially contains component which might cause respiration difficulty. Event Alarm ………………………………………………… 27
Accessories and small parts of the product should be stored keeping out of children’s Playback ……………………………………………………… 27
reach.
o The product is not designed to replace responsibility of human supervision on Information …………………………………………………… 28
children.
o The product is not equipped with device of immediate notification to adult with
accidental/sudden children‘s move; it requires periodic checks and human APPENDIX
supervision.
o This appliance and its antenna must not be collocated or operation in conjunction Specifications ………………………………………………… 30
with any other antenna or transmitter. A minimum separation distance of 20 cm must
be maintained between the antenna and the person for this appliance to satisfy the Troubleshooting ……………………………………………… 33
RF exposure requirements.
o Please note that the content of a micro SD card used for other purposes may be
deleted when it is mounted in the camera.

Downloaded from www.Manualslib.com manuals search engine

 Features

01
o Easy to install
- Simply visit the home page (www.samsungsmartcam.com) and download and
install the program without a separate installer program.
o Remote monitoring
- Whenever and wherever if you are in the Internet enabled environment, remote
monitoring is ready for you.
- PC, laptop or smart phone can be used for monitoring.

GETTING STARTED
o Real-time alarm
- When a motion and sound are detected, your smartphone will generate real time
alarms.
o Saving in SD card
- When an event occurs, the user can save the video in their SD card.
o Two-way Audio
- You can communicate interactively using the optional speaker and microphone.
However, it is available only with the smart phone. (Not applicable to the PC or
Features 4 laptop computer.)
o IR LED
- At low illumination levels, you can use an IR LED for monitoring purposes.

What’s Included 5

Part Name and Function 6

Power Supply 7
Network connection 7

4 · English

Downloaded from www.Manualslib.com manuals search engine

 What’s Included
Check for components when opening the product package.

01

Getting Started
9

Body & Bracket Camera & Cable(8m) Power Adaptor

Network Cable Quick Start Guide Warranty Card

GPL Lisence Screw Plastic anchor

n ` Please save the packaging. You will need the serial number later to register the camera.

Downloaded from www.Manualslib.com manuals search engine

 Part Name and Function
Camera connecting terminal Wi-Fi Direct button
The camera is connected with the RJ-12 cable. This connects the camera and smartphone
wirelessly using Wi-Fi.

Voice input terminal

This is used to connect a microphone.
Power / Network status LED
Voice output terminal
This is used to connect a speaker.

Network terminal
This is used to connect to a wired network.
9

Power terminal
This is used to connect to a power adapter.

Initialization button Camera lens

This initializes the camera's settings. The system will
restart when the button is pressed and held for 10
seconds. Illumination sensor
5(6(7
This detects the brightness of the area around the
camera. It may be changed to night vision mode
Micro SD camera insert
depending on the detection result.

Internal IR LED for nighttime identification

Angle adjusting hinge

6 · English

Downloaded from www.Manualslib.com manuals search engine

 Power Supply Network connection

Plug-in the camera power adapter to the wall outlet and connect the camera as Connect the provided network cable to the camera’s network terminal.
shown. For further details on network configuration, refer to “Network Connection and

n ` Make sure to use the provided power adaptor. If you use an adaptor other than the
Settings”. (Page 10)
01
power supply adaptor provided in our package, the product may not operate properly.
LED status
` It will take about 1min for the camera to boot-up completely.
`

Getting Started
When the camera has finished turning on, the LED lamp turns red and starts blinking. LED indicator shows operational status with colors.
Refer to table below for detailed meaning of the LED indicator.

Color Status
Red Booting up
Red Blinking Booting completed / Establishing network connection
Blue Blinking Connecting to the network.
Blue Local connection established
9
Green Connection to server completed / Normal operation
Yellow WiFi Direct is operating.
Magenta Updating firmware

Downloaded from www.Manualslib.com manuals search engine

 Installation

02
Precautions

1. Install the camera in a place where the Wi-Fi signal can be reached and

INSTALLATION &
without interference.
2. Keep it away from humidity such as around the humidifier.

NETWORK CONNECTION
3. Keep it away from direct sunlight, strong light or dust; install it in a place with
clear view.
4. Do not install it in a place where there are a lot of obstacles.
5. Keep the lens clean at all times.
Wipe off the dust with a soft cloth.

Installation 8
Precautions 8
Assembly 9
Camera installation 9

Network Connection and Settings 10

Precautions 10
Connecting via network cable 10
Wi-Fi connection setting 11

8 · English

Downloaded from www.Manualslib.com manuals search engine

 Assembly Camera installation

1. Match the grooves of main body and bracket. 1. Select the location to install the camera.
2. Turn the screw to [CLOSE] using something that is not sharp (for example a 2. Mount the camera on a wall or ceiling
coin), to fasten the main body and bracket. using the enclosed installation screw.
` Turn the screw to [Open] to separate the main body and bracket.

02
SAMSUNG SMART CAM
MAC ADDRES : BC - 66 - 41 - 10 - 00 - 45
FCC ID : NLMSNHE6440BN
S/N : SNHE6440PV00070

M/C : SNHE6440BN/XX Jun 2014

DC 9.0V
MODEL : SNH-E6440BN
MADE IN CHINA

1.0A

Connecting the camera to the main body

Installation & Network Connection

Connect camera cable to the [CAM] terminal on the side of the main body.

9

Adjusting camera angle

Adjust the lens to face the desired area to monitor.

Downloaded from www.Manualslib.com manuals search engine

 Connecting via network cable
Network Connection and Settings
If you do not have a Wireless Access Point, you must connect the camera using
LAN cable directly to your home router.
Precautions
1. When you apply the power, the power status LED is lit red, and it will change
to red blinking when the booting is completed.
o The wireless network access may fail, depending on the communications
environment. 2. Connect the network cable to the camera and to the home router as shown
o For details about the network settings and password, contact your network below.
administrator or service provider.
o For a specific Internet service requiring user authentication, you may not access
the service. If this is the case, contact the service provider. <Hub>
o Do not access the unauthorized network.
o The farther the distance from the Wireless Access Point, the longer time the <Modem>
network connection may take.
o If you fail to access the selected wireless network, try a different Wireless Internet Service
Access Point to make access.
OR
o For more information about the router or the wireless connection, refer to the
documentation of the router or contact the router manufacturer.
o If the camera is connected to a multiple-Wireless Access Point network 3. The status LED will become steady blue once the camera is connected to
environment, some video packets may be lost, depending on the network traffic the router. (may take up to 30sec).
load. If the status LED (blue) is not lit, repeat steps 2 through the end and check it
again.
o According to the network policy (blocking UDP) of the service provider, the video
transmission can be limited to 7 minutes. 4. The status LED will became steady green once the camera is connected to
For more details, refer to the descriptions on page 19, <Relay Mode>. server.
o In addition to the above two situations, you may encounter a network delay or
interruption due to the network conditions. n ` It is recommended to set the router to DHCP(Dynamic Host Configuration Protocol)
o Some hubs can have compatibility issues. server.
If you want to use static IP address, please refer to <Wired Network> on page 21.
` If the router’s UPnP is not set, then you might be connected in relay mode.
The settings may differ depending on the connected Broadband Router model.
For more information, refer to the user manual of the applicable router.

10 · English

Downloaded from www.Manualslib.com manuals search engine

 Wi-Fi connection setting

If you want to connect a camera to Wi-Fi, first connect the network cable and try
to make a connection to the Wi-Fi network.
1. When you apply the power, the power status LED is lit red, and it will change
to red blinking when the booting is completed.
2. Use the network cable (LAN cable) to connect the LAN port of the unit to the

02
LAN port of the Wireless Access Point.

Installation & Network Connection

<Wireless Access Point>

Internet Service

<Modem>

3. Register and select the camera according to guide of 03. Monitoring.

4. Set your wireless network environment using the guideline <Wireless
Network> on page 22.

n ` If you want to connect your camera to Wi-Fi, you need a hub that supports wireless
networking.
` Using the camera's Wi-Fi Direct function, you can easily make a Wi-Fi connection from
your mobile phone.
` When the wireless network settings are completed, remove the LAN cable.
` If you fail to connect to the Internet service, contact the service provider for details.

11

Downloaded from www.Manualslib.com manuals search engine

 Registration

03
Once you register the product with the site, you can monitor the camera video on
the PC or laptop computer.

Web browser requirements

MONITORING
Windows Mac
Windows XP, 7 supported Mac OSX 10.7 Lion or higher is
- Internet Explorer 9 or higher supported
(The 64-bit is not supported.) - Safari
- Firefox - Firefox
- Chrome - Chrome
Registration 12 Event Alarm 27
Web browser requirements 12
Starting SmartCam 12 Starting SmartCam
Playback 27
1. From your PC, launch your web browser.
Live Video 17
Information 28 2. Go to http://www.samsungsmartcam.com.
Monitoring options 18
3. Select preferred language.
My Account 28
Support 29 4. Click <Sign up> or <Starting SmartCam>.
Setup 20
Basic Info 20
Network 21
Time 23
Alarm & Notification 24
Alarm Schedule 25
SD card 26

12 · English

Downloaded from www.Manualslib.com manuals search engine

 ❖ Plug in installation 3) Click <Install> to begin the installation.

You need to install your plug in to automatically search for cameras connected to
the network and view the video in your camera.

n ` If you login or click <Starting SmartCam> in a PC where the plug in is not installed,
the installation message window will pop up.
` When you install the plug in, the web browser will be terminated and you need to
launch it again.

1) Click <Download Plug-in>, run the setup file.

4) Installation has completed. 03

Monitoring
For Windows

2) Click <Next>.

13

Downloaded from www.Manualslib.com manuals search engine

 For Mac 4) Enter MAC PC password and click <Install Software>.

2) Click <Continue>.

5) Installation has completed.

3) Click <Install>.

14 · English

Downloaded from www.Manualslib.com manuals search engine

 5. Enter the requested information, and click <Sign Up>. 6. According to the network connection and setting, click <Next> when the
camera LED turns into green.

o ID : Using alphabetical characters and numbers, make a combination

using 8 to 14 letters. 7. Select the serial number of the camera to be added from the camera search list.
03
o Password : To strengthen security, create a password with a combination If the camera is not found, enter the serial number manually.
of special characters, numerals and English letters.
8. Click <Next>.

Monitoring
J ` Length and other restrictions of password.
- A combination of English letters/numerals: 10 digits or more
- The password must not be identical to your ID.
- No simple repetitive pattern must be used.
e.g., 1212abab,azxsazxs
- You cannot use 4 or more consecutive letters.
e.g., 1234, abcd
- You cannot use 4 or more consecutive qwerty keyboard letters.
e.g., asdf, 7890
- You cannot use any letter 4 consecutive times.
e.g., !!!!, 1111, aaaa

o Confirm Password : Please enter the password again for confirmation.

n ` Serial number can be found the label on the side of the packaging or on the rear of the
o Name : Enter the user name. product.
o E-mail : Please make sure you enter correct email address as you will have ` The computer and the camera has to be on the same network router to auto detect
to use the email address to receive temporary ID/password when you lost the cameras.
your user ID or password.

15

Downloaded from www.Manualslib.com manuals search engine

 9. Create <Camera Name> and <Camera password>. 12. Select your Wireless Network from the list.
10. Click <Next>. 13. Enter the password of your Wireless Network and click <Next>.

n ` The camera password is used to block the unauthorized access to your camera.
` Create camera password using alphanumeric characters between 1 to 8 without any
space.
n ` If your Wireless Network is hidden, select <Other Wi-Fi Networks (not listed)>.
11. After adding the camera, click <Yes> in the wireless network setup pop-up ` Select <Display password> to display the password.
window.
14. Click <OK>.

16 · English

Downloaded from www.Manualslib.com manuals search engine

 15. Unplug the network cable from the camera and the router.
16. Click <Finish> if the <Finish> button is activated. Live Video
1. Select a camera from the camera list at the upper left hand of the screen.

03
17. Once the camera is successfully registered, you can check the camera in the n ` The gray icon indicates the camera is inactive so you cannot monitor it right now.
camera list.
2. Enter the camera password and click <OK>.

Monitoring
n ` Check on <Remember> to access your camera without entering the password next
time.
` If you want to change the Camera password, please refer to <Basic Info> on page 20.

3. Live video will be displayed on the screen.

17

Downloaded from www.Manualslib.com manuals search engine

 Monitoring options Item Description

 Flip You can flip over the video image.

bc A user can directly save videos in their SD card.

` If there is an ongoing event now or overwrite to SD card is not
checked, and there is storage space of 10% remaining, you
 Manual recording cannot perform manual recording.
` If you move the page or turn off the browser without turning off
the manual recording button, it will be saved for a max of 30
seconds and manual recording will be finished.
Set the network speed (low/mid/high).

 Network Speed ` If the bandwidth provided by your internet service provider is smaller
n  than the recommended value, then the video might get fuzzy or
 temporary disconnections or delays in the live video may be caused.
m
  Capture Image Live video is saved as one image.

 When enabled, you can hear what’s happening around the camera.
 ` Audio is only recorded in the micro SD card when the microphone
 Sound is connected to the main body.
` Some internet service providers do not support audio outputs in
relay mode.
Item Description The video is displayed on the full screen.
 Default Camera Set the default camera to monitor in the camera list. Full screen ` The system supports Internet Explorer only.
` If you double-click the screen, the full screen mode is terminated.
b Delete Camera Delete the registered camera.
Brightness You can adjust the brightness of the screen image.
Cancel remembering
c camera password
Cancel remembering the camera password.
Hide/unhide detailed
m menu
Click on the [ ] icon to unhide or hide detailed setting menu.
If Night Vision is set <ON>, it will automatically switch to black
and white mode in the dark condition and then the IR lamp will Adjust the volume of the microphone and speaker connected to the
 Night Vision automatically operate. camera. (The microphone and speaker are sold separately.)
If Night Vision is set <OFF>, it does not switch to night vision mode If you set the mic to zero, you will hear no live sounds or audio events.
and it will operate in color mode. n Audio
NO recording will be done in the SD card.
Note that the Two-way audio transfer function is available only with the
 Motion zone setting It detects motion within the range set by a user.
smart phone application.

18 · English

Downloaded from www.Manualslib.com manuals search engine

 ❖ Network Speed ❖ Motion detection area setting

Recommended 1) Click the < > icon.

Profile Name Resolution Frame rate
bandwidth 2) Drag it to the screen to set the detection area.
Low Speed Network VGA 20 fps 0.9Mbps

Mid Speed Network HD(720P) 15 fps 1.2Mbps

High Speed Network Full HD(1080P) 20 fps 3Mbps

n ` What is relay mode?

If the network condition is unstable, the camera cannot make a normal connection
(P2P), so it will set up a connection in relay mode. In this case, you will see the video

03
for the first seven minutes only.
` Relay mode is added feature where the video from the camera is transmitted to 3) Click on <OK>.
Samsung server then retransmitted to the user's computer. If you want to delete the set area, click on <Delete All>.

` `
n
If you have trouble connection to the camera, visit "http://www.samsungsmartcam. The <Motion Detection> function needs to be activated in order to use the motion

Monitoring
com", go to support page, and refer to “Troubleshooting” on it. zone function.
` It is recommended to use one browser at one time.
` If simultaneous accesses are made to the high speed network, video quality may be
low.
` The Night Vision video produces a different visibility according to the distance between
camera and subject.

19

Downloaded from www.Manualslib.com manuals search engine

 Item Description
Setup  Serial number You can confirm the serial number.

Click the <Modify>, you can change the Camera password.

Basic Info b Camera password
Enter the current camera password, and type a new Camera password.

c Camera Name Click the <Modify>, you can change the camera name.

You can check the current version and the latest version of your
 Firmware Version
camera S/W.

 Status LED You can turn on/off the LED in your camera.

You can reduce the occurrence of screen shaking due to the frequency
 Flickerless
mismatches with the neighboring lighting.

b `
c n If you change the camera password, you will be logged out and return to the camera
password input page.
 ` Keep the camera password in a safe place as it is used for viewing the live screen of
the camera or for changing the display settings.




20 · English

Downloaded from www.Manualslib.com manuals search engine

 ❖ Firmware update
Network
If the currently used S/W is not of the latest version, update it.
If you are using the latest version, then the firmware will not be activated.
1) Click <Firmware>. <Wired Network>


03
2) Click the < > icon to update the firmware.

Monitoring
3) When the firmware update is finished, the camera will reboot.

n ` If you want to update the firmware, it is recommended to use a wired network

connection.
` If the power goes off during updates, it may not operate properly.
Item Description
` The duration of the firmware update depends on the size of the firmware file and the
network connection speed. If you select <Dynamic IP Address>, the IP address will be obtained
 Dynamic IP Address
automatically.

J ` Do not disconnect the camera from power or the Internet during a firmware update, as
this may damage the system. b Static IP Address
You must manually provide the information of: IP address, subnet
mask, gateway, DNS server address.

21

Downloaded from www.Manualslib.com manuals search engine

 n ` If any of the manual settings is wrong, the network settings will not be applied. Item Description
` If you have both cable and wireless network connections simultaneously, the cable Wireless On/ You can select to activate or deactivate the wireless network
network connection is prioritized.  Wireless Off connection.
` If you switch from the current wireless connection to the cable connection, the network You will see a list of APs (Access Point) available. Select a desired one
will switch to cable connection accordingly. b AP (Access Point) list
from the list of APs (Access Point).
` For more information about the router or the wireless connection, refer to the If you select a secured AP (Access Point), you must enter the
AP (Access Point)
documentation of the router or contact the router manufacturer. c password
password before you can access the network.
For the password, contact your network administrator.
If your SSID is hidden, select the type of security you have. Enter the
<Wireless Network>  Hidden SSID
name of the SSID and the password.

n ` If you select a non-secured AP (Access Point), you just can access the network without
providing a specific password.
` If you entered a wrong password, you cannot access the network whatsoever.
` When the wireless network settings are completed, remove the LAN cable. If you do
 not remove the LAN cable, the wireless network will not be available.

22 · English

Downloaded from www.Manualslib.com manuals search engine

 Time n ` The time will synchronize with the NTP(Network Time Protocol) server automatically.
For this, Internet connection is required.
` You need to set the timezone correctly to obtain the exact time setting.
` The time displayed without Internet connection may not be accurate.


b
c
03


Monitoring
 

Item Description

 Time Confirm the camera's time.

b Time Zone Select your region.

c Display Time Select the time format displayed in time setting.

 Automatic Time It sets camera's time automatically.

Check this option if you live in a country or region where DST(Daylight

 Daylight Saving Time
Saving Time) is applied.

 Time to show Live screen displays the time.

23

Downloaded from www.Manualslib.com manuals search engine

 Alarm & Notification <Gmail> Notification
The event alarm is sent through Gmail.

Camera has ability to send event notifications when motion or audio is detected. 1. Select the Google.
2. Enter your Gmail address and password.
3. Click <Save>.
4. Select <Use> of “Send alarms”.
5. Enter your email address to receive the notification e-mail and click <Add>.
Now, the receiver full email address will be shown in the List Box. If you want
to register more than one email address, you can just repeat the same
procedure.


Item Description
You can set motion or audio alerts. Sensitivity level can also be set.
The higher the sensitivity, the more accurate motion and audio events <Receiver
 Alarm notification can be detected. email address>
` When an event occurs, if you want to send alerts to Gmail, first log
into your google account.

n ` In the following case, it may fail to derive the proper results for basic events and
`
motion detection. n `
If your Google email ID/password are saved, only check “Send alarms”.
If the email address for the recipient entered is incorrect, event alerts will not be sent.
- The object color or brightness is similar to the background.
- Multiple movements continue occurring at random due to a scene change or other reasons. ` Even if you entered a correct google account ID, if the ID/password confirmation pop up
window appears, click on <Go to the google page.> and check the google account.
- A fixed object continues moving in the same position.
- An object hides other objects behind.
- Two or more objects overlap or one object divides in multiple portions.
- A moving object comes close to the camera.

24 · English

Downloaded from www.Manualslib.com manuals search engine

 Push alarm Notification Alarm Schedule
The push alarm is provided through the web viewer and mobile app in which the
camera is registered.
Alarms will only operate for the times selected by the user.


b
03
o Push alert list shows the list of IDs of users who registered cameras.
When an alarm occurs, the web site will send push alerts to each smart phone.

Monitoring
Item Description
Alarm function will only operate for the time/day designated by the
 Only Scheduled Time
user.

b Always Alarm function always operates.

25

Downloaded from www.Manualslib.com manuals search engine

 n ` Turn off the camera power or set it to <Off> before removing the micro SD card. If you
SD card fail to do this, the data in the micro SD camera may be damaged.
` Please note that the content of a micro SD card used for other purposes may be
deleted when it is mounted in the camera.
When an event occurs, it is saved in an SD card.
` The following micro SD cards are recommended for this camera.
Manufacturer : Sandisk, Transcend
Recommended Capacity : 4GB ~ 32GB
Class 6 or higher, MLC type
` Micro SD card of max 32GB is supported and a FAT32 file system is supported.
` It is recommended to use the micro SD card after formatting it. Regularly formatting
the memory card will help extend its life.


b
c

Item Description
If you set motion/audio, video will be automatically saved in your SD
 Use the SD card
card.

b Continuous Recording Saves the video without being interrupted by events that may occur.

If the SD card capacity is insufficient, it will start overwriting the oldest

data.
c Overwrite
` When there is storage capacity of 10% remaining, the top
notification window will show an alarm.

 SD Card Status Check the remaining capacity of your SD card and delete all the data.

26 · English

Downloaded from www.Manualslib.com manuals search engine

 Event Alarm Playback
You can check the event alarm that occurred. You can play the video recorded in your SD card.

b
c



  03
b 
c

Monitoring
Item Description 
 Delete by dates Delete all the event alarms on the date.
Item Description
b Delete All Delete all the event alarms for thirty days.
 Type Set the event type to search for during the search period.

c Display Events Displays the number of events occurred in the 30 day list.
b Date Set the search date for the data saved in your SD card.
 Arrange by types Arrange the event list by event types.
c Play/pause Play and pause video.

 Search Perform event searches.

 Refresh Renew the events displayed in timeline.

 Timeline Use the timeline to play the video in the desired time.

27

Downloaded from www.Manualslib.com manuals search engine

 My Account
Information

n ` If you want to change the member information, click on <Account>. Select the item
(password, or email address) and enter your information.

28 · English

Downloaded from www.Manualslib.com manuals search engine

 Support

You can download the Samsung SmartCam mobile app and user guide.

03

29
Monitoring

Downloaded from www.Manualslib.com manuals search engine

 5RGEKſECVKQPU

04
Specifications

Item Description

OS Linux

APPENDIX Resolution

Max. Framerate
1920x1080, 1280x720, 640x480

1080p@20fps

Video Compression Format H.264

Streaming Capability Multiple Streaming (Up to 5 Profiles)

Specifications 30 Angular Field of View (D/V/H) 128°/ 62°/ 111°

Specifications 30 Low Light Performance 0.3Lux(Color), 0Lux(Black/White)

Product Appearance 32 WDR N/A

Day & Night True D/N Filter

Troubleshooting 33 Night vision IR-LED, 15M

Digital Zoom 4X

Flip / Mirror Support

Motion Detection Support

30 · English

Downloaded from www.Manualslib.com manuals search engine

 Item Description Item Description

Audio Detection Support Input Voltage / Current 9V DC / 1A

Audio I/O Support (external microphone and speaker) Power Consumption Max. 9W

Audio Compression Format G.711 Indication 1 LED (Power, Status, Link)

Audio Communication Bidirectional (external microphone and speaker), Half Duplex Color White

External microphone 3.5mm Passive microphone(mono) Camera (incl. bracket): Φ54 x H102mm,
Dimension (WxHxD)
Body (excl. cradle): W83.2 × H111 × D27.3mm
External microphone sensitivity - 35dB ~ - 40dB
Weight 568g
External microphone cable length d 8m

Shielded microphone cable (The microphone noise depends on

External microphone cable type
the cable length and shield characteristic.)

Memory Slot microSD (FAT32), Up to 32GB

Recording & Playback

Event recording, Manual recording, Continuous recording, Remote
playback
04
Ethernet RJ-45 (10/100BASE-T)

Appendix
Wireless Wi-Fi 802.11 b/g/n (2.4G Single-band)

WiFi Direct Support (Push button)

Security SSL (AES 256bit)

Max. User Access 5 users at Unicast Mode

Operating Temperature / Humidity Camera : -10°C ~ 50°C, Body : 0°C ~ 40°C / Less than 90% RH

Ingress Protection IP66 (Camera part), Indoor (Body)

31

Downloaded from www.Manualslib.com manuals search engine

 Product Appearance

Body Camera

83.2 27.3 Φ54

116.6
111

102

90.2 59.4

32 · English

Downloaded from www.Manualslib.com manuals search engine

 Problem Action
Troubleshooting The video from the
camera is temporarily
- The video from the camera can be delayed according to a network delay.
Please check if the camera is installed in a place of proper wireless Internet
If you encounter a problem with your system, see the table below to solve the problem lost. communications.
as quickly and easily as possible. Please follow the instruction below:
- Click the Voice icon in the video playback page, or check if the voice is
No sound is output
turned On in your smart phone app.
from the video.
Problem Action - Some internet service providers do not support audio outputs in relay mode.
- Move to “Log-in page Œ Forgot your ID/Password?”, and enter the - You must create a new camera password.
registered e-mail address to which we will send you the user ID and/or a - Press the initialization button on the back of the product for more than 10
I forgot my user ID/ I forgot my Camera
new password. seconds to reset to factory settings.
password. password.
It can be spammed out depending on the policy of the email server. - After factory initialization, when you access the camera, you can reset the
After logged in, it is advisable to change the temporary password provided. password for the camera.
- If the camera's wireless internet indication LED goes off too often, then it I want to change my
Camera is not means that the camera installation location is not optimal for the wireless - After logging in, click on the <Account>. Select the item (password, or
password and/or
connected to the internet environment, so in this case, locate the camera close to the wireless email address) and enter your information.
email address.

04
wireless hub. hub and try to connect again.
- Check the password for the wireless hub and try again. - Check the UPnP setting of the router.
Camera will be
- Using a network upload speed of 1Mbps or higher is recommended.
- Check that the serial number entered matches the label on the back of the connected in a relay
- Depending on the policy of your service provider, you can access in relay
camera. mode.
mode.
- Enter the correct password for the camera registered again and try to

Appendix
register the camera again.
After logged in, - Check the camera LED to see if it is green. If not, then check the network
I failed to register the connection.
camera. - If you are still unable to register the camera after this, then reset the camera
to factory settings and begin again.
(If you want to reset to factory settings, press and hold the initialize button
on the back for 10 sec. Once initialized to factory settings, the camera will
be restarted.)

33

Downloaded from www.Manualslib.com manuals search engine

 Samsung Techwin cares for the environment at all product manufacturing stages, and
is taking measures to provide customers with more environmentally friendly products.
The Eco mark represents Samsung Techwin’s devotion to creating environmentally
friendly products, and indicates that the product satisfies the EU RoHS Directive.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate
collection systems)
This marking on the product, accessories or literature indicates that the product and
its electronic accessories (e.g. charger, headset, USB cable) should not be disposed
of with other household waste at the end of their working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they can take
these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product and its electronic accessories should not be
mixed with other commercial wastes for disposal.

Downloaded from www.Manualslib.com manuals search engine

 SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
6, Pangyo-ro 319beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, SEOUL 463-400 Rep. of KOREA
Tel : +82-70-7147-8753, 8764 Fax : +82-31-8018-3740
www.samsungsecurity.com
SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD.
100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey,
Customer support : +1-877-349-3149 Surrey, UNITED KINGDOM KT16 OPS
www.samsungsv.com Customer support : 00800-8010-8022
www.samsungsecurehome.eu

Downloaded from www.Manualslib.com manuals search engine

 English

Quick Start Guide for Android Setup

Before you begin your SmartCam Setup, please:
 Have your SmartCam and power adapter ready.
 Have your Android device available to download the SmartCam app.
 Make sure you are within range of the same Wi-Fi network you’ll use for
your camera.
 Have your Wi-Fi network password handy.
 Be prepared to register with a valid name and e-mail address.

If you have questions or need help installing your SmartCam, please

contact our free technical support.
1-877-349-3149 (9am – 9pm EST, Mon – Sun)
Please visit samsungsmartcam.com for full user manual, mobile app
manual and FAQs.

Product Views For Setup

Use the following illustrations to familiarize yourself with the camera setup
parts. For a more detailed diagram, please see User’s Manual.

1
2 6
3 7 10

4
5
8
9

1) Camera unit connection port 6) Wi-Fi Direct Button

2) Audio input 7) Power/Wi-Fi Status LED
3) Audio output 8) Reset Button
4) Network Port (Used for wired 9) MicroSD Card Slot (up to 32GB)
connections) 10) Camera
5) Power Input

Downloaded from www.Manualslib.com manuals search engine

 User Account Setup
Before you begin setting up the camera, you must create an user account.
Follow these easy steps to register your account.

1. Go to the Play Store 2. Search for "Samsung 3. Open the app. 4. Tap <Create new
from your Android SmartCam". account>.
device.

5. Tap <Start>. 6. Enter User ID, 7. Tap <Next> to

Password, valid register your
Name and e-mail camera.
address.
Tap <Register>.

Record your SmartCam information here:

Account Registration
USER ID: ______________________ USER PASSWORD: ____________
8-14 letters or letters with numbers 10-14 letters and numbers combination
Example: johnsmith Example: smartcam123

Downloaded from www.Manualslib.com manuals search engine

 Android Wireless Camera Setup
Continue with camera setup by following the app wizard instructions.

1. Tap <Wireless 2. Connect the power 3. Select your camera’s

Setup>. and press Wi-Fi serial number and
button on the back tap <Next>.
of the camera.

6. When the LED light 7. Create Camera 8. If you want to begin

turns green, you Name & Password. viewing live video,
will automatically be Name: 1-20 letters select <No>. If you
directed to Step 7. and/or numbers. want to continue with
Password: 1-8 selecting camera
letters and/or preferences, select
numbers. <Yes>.

Camera Registration
CAMERA NAME: _______________ CAMERA PASSWORD: _________
1-20 letters and/or numbers 1-8 letters and/or numbers
Example: LivingRoom Example: 1234

Downloaded from www.Manualslib.com manuals search engine

 4. Select the Wi-Fi 5. Enter your Wi-Fi
connection you use network password.
for your SmartCam
Camera.

9. Select your Time 10. Enable motion and/

Zone and then tap or audio detection to
<Next>. receive event alerts
on your devices.

You have now successfully completed the SmartCam setup.

Downloaded from www.Manualslib.com manuals search engine

 SmartCam Control Guide
Once setup is complete and live video appears on your Android device,
tap the screen to display the SmartCam tool bar. This chart serves as a
reference to navigate onscreen controls and customize your SmartCam
experience.
3A
test test

 b c      
Number Description

1. Manual Recording Tap to save streaming video onto the SD card

2. Capture Tap to capture and save a still image during monitoring

3. Two-Way Talk Tap to begin and end Two-Way Talk between mobile device and camera

3A. Microphone Button During Two-Way Talk, press Mic Button on screen to talk, release to listen

4. HQ Tap to view the highest video quality available

5. Melody Tap to view and choose melody selection to play through camera

6. Brightness Control Tap to adjust screen image brightness

7. Flip Control Tap to flip screen image vertically or horizontally

Tap to enable Motion Zone Select by drawing up to three boxed areas on your screen for
8. Motion Zone Select
motion alerts in only those specific areas

9. Audio Message
Tap to record up to 10 messages to be played through the camera speakers
Recorder

10. Information Tap to display current audio and video information

Downloaded from www.Manualslib.com manuals search engine

 English

Quick Start Guide for iOS Setup

Before you begin your SmartCam Setup, please:
 Have your SmartCam and power adapter ready.
 Have your iOS device available to download the SmartCam app.
 Make sure you are within range of the same Wi-Fi network you’ll use for
your camera.
 Have your Wi-Fi network password handy.

If you have questions or need help installing your SmartCam, please

contact our free technical support.
1-877-349-3149 (9am – 9pm EST, Mon – Sun)
Please visit samsungsmartcam.com for full user manual, mobile app
manual and FAQs.

Product Views For Setup

Use the following illustrations to familiarize yourself with the camera setup
parts. For a more detailed diagram, please see User’s Manual.

1
2 6
3 7 10

4
5
8
9

1) Camera unit connection port 6) Wi-Fi Direct Button

2) Audio input 7) Power/Wi-Fi Status LED
3) Audio output 8) Reset Button
4) Network Port (Used for wired 9) MicroSD Card Slot (up to 32GB)
connections) 10) Camera
5) Power Input

Downloaded from www.Manualslib.com manuals search engine

 User Account Setup
Before you begin setting up the camera, you must create an user account.
Follow these easy steps to register your account.

1. Go to the App Store 2. Search for "Samsung 3. Open the app. 4. Tap <Create new
from your iPhone or SmartCam". account>.
iPad.

5. Tap <Start>. 6. Enter User ID, 7. Tap <Next> to

Password, valid register your
Name and e-mail camera.
address.
Tap <Register>.

Record your SmartCam information here:

Account Registration
USER ID: ______________________ USER PASSWORD: ____________
8-14 letters or letters with numbers 10-14 letters and numbers combination
Example: johnsmith Example: smartcam123

Downloaded from www.Manualslib.com manuals search engine

 iOS Wireless Camera Setup
Continue with camera setup by following the app wizard instructions.

1. Tap <Wireless 2. Connect the power 3. Exit SmartCam app

Setup>. and press Wi-Fi by pressing the
button on the back home button.
of the camera.

7. Enter your Wi-Fi 8. When the LED light 9. Create Camera

network password turns green, you Name & Password.
and tap <Next>. will automatically be 1-20 letters and/or
directed to Step 9. numbers.
Password: 1-8
letters and/or
numbers.

Camera Registration
CAMERA NAME: _______________ CAMERA PASSWORD: _________
1-20 letters and/or numbers 1-8 letters and/or numbers
Example: LivingRoom Example: 1234

Downloaded from www.Manualslib.com manuals search engine

 4. Go to your phone 5. Find the last 4 digits of your 6. Select your Wi-Fi
settings. Select SmartCam serial #, then network.
<Wi-Fi> settings. enter password “smartcam”.
Return to SmartCam app.

10. If you want to 11. Select your Time 12. Enable motion and/
begin viewing Zone and then tap or audio detection to
live video, select <Next>. receive event alerts
<No>. If you on your devices.
want to continue
selecting setting
preferences, select
<Yes>.

You have now successfully completed the SmartCam setup.

Downloaded from www.Manualslib.com manuals search engine

 SmartCam Control Guide
Once setup is complete and live video appears on your iOS device, tap the
screen to display the SmartCam tool bar. This chart serves as a reference
to navigate onscreen controls and customize your SmartCam experience.
3A
Back test Back test

 b c      
Number Description

1. Manual Recording Tap to save streaming video onto the SD card

2. Capture Tap to capture and save a still image during monitoring

3. Two-Way Talk Tap to begin and end Two-Way Talk between mobile device and camera

3A. Microphone Button During Two-Way Talk, press Mic Button on screen to talk, release to listen

4. HQ Tap to view the highest video quality available

5. Melody Tap to view and choose melody selection to play through camera

6. Brightness Control Tap to adjust screen image brightness

7. Flip Control Tap to flip screen image vertically or horizontally

Tap to enable Motion Zone Select by drawing up to three boxed areas on your screen for
8. Motion Zone Select
motion alerts in only those specific areas

9. Audio Message
Tap to record up to 10 messages to be played through the camera speakers
Recorder

10. Information Tap to display current audio and video information

Downloaded from www.Manualslib.com manuals search engine

 1. Requirements for mobile devices
Hardware / Operating System Requirements
3. Tap <Start>.

OS - Android 4.0/4.1/4.2/4.3/4.4 Welcome to

CPU - 1GHz or higher
- 128MB or more (recommended),
RAM
RAM : 50MB (Minimum)
- Must support Wi-Fi or 3G/LTE mobile Setup using 3 simple steps below.
Network

SmartCam
communication Step 1. Sign up for an account

Step 2. Register your camera

Video Codec - H.264 Step 3. Configure your camera

Recommended mobile devices - Galaxy S3/S4 Start

Android Recommended Tablet PC - Galaxy Note 10.1

4. Enter requested information. Create new account

English J  If you use 3G or 4G(LTE) data communication, excessive amount of

ID

M 
Create user ID between 8-14 characters using

fees can be billed and may cause data delays or loss. Wi-Fi is Email address is used to search for letters and/or with numbers

User ID

recommended. account ID or password.

Password
Create password between 10-14 characters using

5. Read the terms and conditions, both letters and numbers. Example: samsung135

Password
and tap <Register>. Confirm Password

Now you can monitor critical events with your mobile Name
devices through the SmartCam application. 2. Subscription Enter your name.

Download the application from Play Store and install on e-Mail

Example: [email protected]
your mobile device. 1. Run the downloaded application.
I agree to the Samsung Techwin's terms and
conditions.

™ Search keywords for the application: "Samsung SmartCam", Terms of Services

"Smartcam", "Samsung techwin", "Techwin". Privacy Policy

Register

2. Tap <Create new account>. 6. Tap <Next> when the menu on

the completion of a new member Account
. created. Tap <Next> to
setup the camera.

registration pops up. Cancel Next

) [email protected]
|Enter User ID.

Enter Password.
M  Tap <Add Camera> after logging
Remember me Auto Login
in if you are already a member.
Camera Setup About

Login
Add Camera

Forgot your ID?

Forgot your password?

Create new account

Downloaded from www.Manualslib.com manuals search engine

 Wi-Fi Direct connection 9. After selecting a camera to Registration
11. The LED of the camera will Registration

connect, tap <Next>. The camera(s) will be listed below. turn into green if a camera is

Select the camera you wish to add and

M You can only use it in a camera that has a Wi-Fi Direct sticker

tap <Next>.
If a camera doesn't connect, please connected to Wi-Fi.
attached to it. M Select a camera that has the last check '?'.


 Press the button, "Tap here to add registered camera" when you
four digits of the serial number on
the back of the product.
M Camera's LED will blink in blue
while searching for a WiFi router.
00 : 02
register a camera being used in another account, in order to register
If a connection is made to the WiFi
it immediately without setting it.
router, the LED will be blue
Please wait until the status LED on the
consistently. After a short while, camera changed from blue to green.
7. Tap <Wireless Setup>. It takes about 3 minutes.
while the camera is connecting to
Is there a WiFi DIRECT sticker on
the camera lens? the server, the LED will turn green.

Fi DIRE
Wi

CT

Next

10. Select a WiFi router connected to Registration

12. Enter <Camera Name> and Registration

If yes, select Wireless Setup. your camera. Select the WiFi network you <Camera password> and then
If not, select Optional Setup. want the camera to connect to.

• : After entering the click <OK>.

Create camera name and camera password.
Apple Network 8dfdc7

Wireless Optional
password, connect to a WiFi
router. design M  Click <Show Password> to check Camera Name
00 : 02
Setup Setup your password. Example: Living Room

Cisco_WPS_57090
• : Without the password, you Camera password

Tap here to add registered camera

will not be connected to a WiFi KT12580 Use 1 - 8 numbers and/or letters

router. NETGEAR27
Confirm password
Please waituntil the status LED on the
camera changed from blue to green.
It takes about 3 minutes.
Show Password

8. Tap <Next> after connecting Registration • Other WiFi Networks : Enter the
Cancel OK
a camera according to the SSID name, security type and
1
instructions displayed on the DCIN 5V
Plug in the power adapter
and connect it to the
password.
camera. Camera can take

screen. up to 2 minutes to boot up. If selected, it shows guide

on SSID and networking Other WiFi Networks

2 procedures.
When the camera LED flashes in
red, press the WiFi button on the
back of the camera for 5 seconds. • Network password :
Registration
13. The camera registration is
If you select a WiFi router with Select the WiFi network you completed.
want the camera to connect to.
the password, then the pop up Select <Yes> for a camera
3 Network password
setting.
The status LED on the
camera will change to light
window will prompt you to enter Apple Network 8dfdc7
Enter WiFi network password
green/yellow. Tap <Next>
the password. design Select <No> to view a live
Cisco_WPS_57090
Cancel OK
screen. Camera registered
successfully.

Next
KT12580
M  If you failed to register wirelessly,
The camera settings can be set
to your preference. Continue
with the camera setup?
NETGEAR27
1 2 3 4 5 6 7 8 9 0
please try again over a wireline.
q w e r t y u i o p  Cameras may not be registered
a s d f g h j k l
depending on the settings of the
mobile device.
z x c v b n m No Yes
··· ···
In this case, contact the service
123 ? )
Sym WIFI
English(US)
( . Done
center.

Downloaded from www.Manualslib.com manuals search engine

 3. Camera List
Cable connection 10. If the camera is not detected, Registration
Camera Move
No camera(s) found.
please enter the camera serial Check the serial number on the back of the camera
and enter it below.
7. Tap <Optional Setup>. number manually. 1. Move to the <Camera> item.
Is there a WiFi DIRECT sticker on From the listed active cameras, Camera Setup About

the camera lens?

M  For camera's serial number tap the desired camera's [ ] on Add Camera

location, refer to [ ]. Serial number

the right. test
|Enter the 15-digit serial number.
Fi DIRE

M 
Wi

CT

test2
Prev Next You cannot monitor an inactive
1 2 3 4 5 6 7 8 9 0 camera.
q w e r t y u i o p  For a Wi-Fi Direct camera, you can
If yes, select Wireless Setup.
If not, select Optional Setup. a s d f g h j k l
set the wireless network by
selecting an inactive camera.
z x c v b n m
··· ···
Wireless Optional 123 ? English(US) 
Sym . Done
Setup Setup

Tap here to add registered camera 11. Enter <Camera Name> and Registration

Found camera(s).
<Camera password> and then Select the camera listed below and tap <Next>. If the
cameras are not listed, enter the camera serial
8. Tap <Next> after connecting Registration
click <OK>. number manually.
2. Live, Event, Playback and Setup test

a camera according to the 1

C8BG6V2C801011T
Create camera name and camera password.
icons will be displayed.
instructions displayed on the DCIN 5V Plug in the power adapter
M  Click <Show Password> to check Camera Name
C8AT6V2C400079A

J 
and connect it to the camera.

screen.
Camera can take up to 2
minutes to boot up. your password. Example: Living Room
The supported functions may be
KHNL6V2D70002KN
Camera password
different depending on the model.
2 Use 1 - 8 numbers and/or letters
SMART6411ADT003
Connect the camera to the WiFi Confirm password
router using network cable.

Show Password

Cancel OK
3
Tap <Next> when the camera LED Serial number
changes to green.
(For *SNH-1010N, the power LED
turns to white)
|Enter the 15-digit serial number. test

Prev Next

Live Event Playback Setup

Prev Next
12. The camera registration is
completed.
9. Select the camera found and tap Registration
Select <Yes> for a camera
Found camera(s). Delete Camera
<Next>. Select the camera listed below and tap <Next>. If the setting.
cameras are not listed, enter the camera serial
number manually.
Select <No> to view a live 1. To delete an added camera, tap
M  When your smartphone is C8BG6V2C801011T
screen. Camera registered
and hold the desired one from the Camera Setup About

connected to the same Wi-Fi C8AT6V2C400079A

successfully.
Add Camera
camera list, and tap <Delete>.
network as the camera, it will
KHNL6V2D70002KN M  Cameras may not be registered
The camera settings can be set
to your preference. Continue
with the camera setup?
test
automatically search for the depending on the settings of the
camera. SMART6411ADT003
mobile device.
Are you sure you want to remove this

 Cameras already registered are not In this case, contact the service camera?

searched. center. Cancel Delete

No Yes
Serial number
|Enter the 15-digit serial number.

Prev Next

Downloaded from www.Manualslib.com manuals search engine

 4. Live Video
1. Tap the desired camera's [ ]
Camera Setup About
Live Video No. Description
or tap the <Live> icon.
Add Camera c A user can record audio and play the recorded audio
 
M If there is the latest version of
firmware, when you make a live
test test test
Audio playing through the camera speaker.
 You can record a max of 10 audio files.
test2
video connection, a pop up will Information Current audio/video information is displayed.
appear so that you can update your
camera's firmware. test
If you select <Night Vision> in general settings, IR
IR Lighting
lighting will operate for two minutes.
Live Event Playback Setup

J  The supported functions may be different depending on the model.

2. Enter the <Camera password> test

 b c      
for the camera selected. This is
Two-way Audio
the same camera password you Camera password test
created at the time you registered No. Description
|Enter the camera password.

the camera. Save A user can manually save the video in the SD card.
Check the <Save> option to save
the camera password.
Cancel OK 
Manual  If there is storage space of 10% while the SD card
Recording overwrite function is not activated, you cannot perform
Within 20 seconds, it will start manual recording.
streaming. 1 2 3 4 5 6 7 8 9 0

q w e r t y u i o p
b Capture You can capture and save a still image from the video.

a s d f g h j k l The microphone for two-way audio between cameras

Two-way
z x c v b n m c Audio
and mobile devices is activated. 1. Tap on the Two-way Audio icon.
123
Sym
···
? English(US) 
···
.
 Refer to the bidirectional audio function. 2. The Mic icon will appear.
In general network environments, high quality video is 3. Talk while pressing down the mic icon. The voice can be
M  According to the network service provider's policy, or the network provided. heard from the speaker on the camera. After finishing
connection status, it may take a while to load.  Depending on the network status or service provider's talking, press down the icon for two seconds so that the
 HQ policy, HQ video may not be provided. In this case, audio information will be transmitted through the network.
video is displayed for seven minutes.
4. Even if you did not activate the two-way audio function,
 In relay mode, no HQ video is provided. For more you can receive the audio sound of the video. In addition,
details, refer to "Relay Mode".
the microphone setting should be at least 1 or higher if you
The selected melody will be heard through the camera want to use the two-way audio function.
 Melody
speaker.
J  When there are multiple users logged on to the camera, first person
Brightness who tap the Talk icon will have the control.
 Adjusts the screen brightness.
control
 While the bidirectional audio is on, you need to tap the bidirectional
 Flip control Flips the video image. audio icon again to cancel the function.
 In relay mode, there is no audio. For more details, refer to "Relay
It detects motion within the area set by the user. Mode".
 Motion zone
 Refer to the motion zone functions.

Downloaded from www.Manualslib.com manuals search engine

 Motion zone Relay mode General setting
If the network condition is not good and a connection is 1. Tap <General>. General

unstable, then you can use the relay mode to view video for Camera Name test

seven minutes. 2. Configure the basic camera Speaker

When the relay mode connection is made, the [ ] mark is settings.

Mic

displayed on the video, and to maintain stable connections, • Camera Name : Camera name Audio REC
there will be no audio or HQ video. is used to easily identify the
Night Vision
camera when you have more
Cancel Clear OK

J  If the router UPnP setting is not set, then a relay mode connection than one. WDR

can be made. Depending on the model of router used, a different • Speaker/Mic : Adjust the
Display date

1. Tap the motion zone icon. setting method is used. Refer to the user manual. volume for the camera's built-in Save camera password

2. Connect to the motion zone mode.  If a camera is connected to the multiple router, or the wired/wireless mic or speaker. Change camera password

network environments for camera and mobile device are unstable, a


status LED
3. After touching the video, drag it to set the area.
 You can set a max of three motion zones.
relay mode connection can be made. M If you set the mic to zero, there will be noo
live sound and no audio event and also
Firmware Version v1.00


Cancel Apply
If you have trouble connection to the camera, visit "http://www. there is no recording in the SD card.
4. If you want to run the motion zone in the area set, tap samsungsmartcam.com", go to support page, and refer to Audio List

<OK>. "Troubleshooting" on it. • Audio REC : The voice can be 01. Add personalized audio clip

 Motion is detected only in the set area. recorded or deleted by users.

02. Add personalized audio clip
• Night Vision : Set the IR lighting.
 Motion zone function only operates if motion detection is activated. Check <Night Vision> to set 03. Add personalized audio clip

In <Setup> - <Event>, set motion detection. the camera to switch to the 04. Add personalized audio clip

night vision mode automatically.

5. To delete the set area, press <Clear> and <OK>. 05. Add personalized audio clip

If you want to exit the motion zone setting mode, tap

M  In the case of SNH-1010N, you can 06. Add personalized audio clip

<Cancel>. 5. Camera Setup check <Night Vision> for a camera 07. Add personalized audio clip

to automatically operate the IR lighting

To control digital zooming Tap the <Setup> icon to configure a camera to be monitored. 08. Add personalized audio clip
for two minutes depending on the
09. Add personalized audio clip
test Setup brightness of the neighboring areas.
10. Add personalized audio clip
• WDR : You can compensate for
You can also zoom in by pinch open using two the backlight by making a dark
fingers on the screen. To zoom out, pinch close area brighter, and a bright area General

on the screen. darker. Camera Name test

Touch and hold to drag the screen in any

direction to reveal the hidden part of the image  SNH-P6410BN supported Speaker

Mic
M
if enlarged bigger than the screen. test Current Password
• Display date : Displays the date/ A
Audio REC
General
time on the live video. N NewVision
Night Password
Network
test
• Save camera password : You W
Use 1-8 numbers and/or letters
WDR

M  Current digital zooming level is noted next to the digital zoom box, Time
will be connected to your D
Confirm password
Display date

and digital zooming supports zooming up to x4. Live Event Playback Setup
Event
camera without having to enter Show Password
Save camera password
S
SD Card the password. Cancel Apply
Change camera password
C

• Change camera password : status LED

Change the current camera
Firmware Version v1.00
password. Cancel Apply

Downloaded from www.Manualslib.com manuals search engine

 • status LED : You can turn on or off the LED on your camera. Event setting Setting Google Drive
• Firmware Version : You can check the current version and
1. Tap the <Event>. Event You can set the Google Drive through request for authentication.
the latest distributed version and even make updates.
Event alert
If there is the latest version of firmware, when you make a live 2. Set your event items. 1. Log onto the Google account. MGoogleDetection
Motion
video connection, a pop up will appear so that you can update Motion Detection
Drive

your camera's firmware. • Event alert : Detection of Sensitivity 2. Tap <Accept>. S Login to your Google account to receive the
Sensitivity
authentication
View andcode.
manage Google Drive files that
you have opened or created with this
motion/audio or saving of video An authentication code is Audio app
A Detection
3. Tap <Apply>. Audio Detection
in the Picasa or Google drive is created. View metadata for files and documents
Sensitivity
S in your Google Drive


Sensitivity

J The supported functions may be different depending on the model. notified to the user.
Google account setup
3. Tap <Send authentication Google
G account
Google Drive for Samsungsetup
SmartCam and Google will use
this information in accordance with their respective terms
• Motion/Audio Detection : code>. of service and privacy policies.
Picasa
P
Specify whether to trigger the Picasa
Google Drive setting is Y can set the Google account
You to upload Accept
Cancel images to
Picasa.
P
Network setting alarm or not, and specify the You can use your Google account to store event
detected images to Google+
completed. Authentication code
Google Drive
G
sensitivity. Google Drive
Account
A c setting Authentication
1. Tap the <Network>. Network
The higher the sensitivity is, the Account setting Authentication
request
Send authentication code
requests

WiFi
subtler motion/audio events will
2. Configure the wireless network. From the list below. Please select the WiFi
network you wish to use.
be detected. Cancel Apply

• WiFi : Display the list of WiFi MGoogleDetection

Motion Drive
Apple Network 8dfdc7 • Google account setup : You
router that you can use. Event
Login to your Google account to receive the
Sensitivity
S
design can upload pictures on Picasa When an event is detected, camera will
authentication code.
xxxxxxx


Event
E alert upload images to your Google+

M
automatically

If the Wi-Fi receiving sensitivity is Cisco_WPS_57090

through the Google account. account as a private photo.
Audio Detection
A
Please copy this code, switch to your application and
Sensitivity
S paste it there:
Motion
MGoogle Detection
e-mail
poor, receiving a video may not
M 
4/RF6he608emlcKYoh************************
KT12580
If you wish to send an event alarm Sensitivity
S
work properly. Move the location of Google account setup
G
NETGEAR27
to the Picasa/Google drive, you Google password
the camera to adjust receiving Audio Detection
A P
Picasa
must register the Google account
sensitivity. Sensitivity
S You can set the Google account to upload images to
Y

first. Show Password

Picasa.
P
Authentication code
Google
G Google
G Drive
Need toaccount
create a setup 4/RF6he608emlcKYoh ************
Move
• Picasa : Sends event images to Google account.
Picasa
P
Account setting
A Authentication
requests
If you cannot access a Google account, then Send authentication code

Other WiFi Networks

the user's Picasa account. Youlog
Y into
can theyour
use following
GoogleGoogle page
account toto permit
store event
accessimages
detected
d and try to
again.
Google+

• Google Drive : A 30-second Permit Google

Google
G accessDrive
Move

video clip is uploaded Authentication

Time setting automatically to the user's
Account setting
A
requests

Cancel OK

Google Drive account.

1. Tap <Time>. Time Cancel Apply

Time
2. Set the camera's clock. 2014-04-20 02:04:38

Time zone J  If your model supports an SD card slot, then video is saved in the SD
|
card, not Google Drive.
• Time zone : Select your region. (GMT) Greenwich Mean Time

• Daylight Saving Time : Check Daylight Saving Time 3. Tap <Apply>.

this option if you live in a country
or region where DST(Daylight J  The supported functions may be different depending on the model.
Saving Time) is applied.

Cancel Apply

Downloaded from www.Manualslib.com manuals search engine

 6. Event List
SD card setting 1. Tap the <Event> icon, and the test
2. Detected events will be saved in the server and displayed in
Google Drive and the Picasa the event list.
J  Only applicable to those models that provide SD card slots. event link are displayed. Google Drive icon:
 You need to purchase an SD card if you want to use it.
M  Events are listed only when you
Tap the Google Drive
 Note that inserting an SD card which has been used for other have registered the Google account
icon to play video.
purposes into the camera may delete the data. and set the Google Drive/Picasa. Event

 Before removing the SD card, deactivate the Use SD card setting. Audio
Apr-20-2014

14:26:23 Picasa icon:

If not, the SD card can get damaged. Detection icon Apr-20-2014 Tap on the Picasa icon
14:25:30
Apr-20-2014
to see picture.
1. Tap <SD Card>. Setup test Motion Detection 14:24:20
Apr-20-2014
Icon 14:22:18
Apr-20-2014

Live Event Playback Setup 14:21:18

Apr-20-2014

14:19:24
Apr-20-2014

14:18:17

M  You will get a notification prompt test

Apr-20-2014

14:17:35
when event is detected by the Apr-20-2014
test
camera. 14:16:16
Apr-20-2014
General
 While uploading files in Google
14:15:56

Network
Drive or Picasa, no event is
detected.

Time Motion Detection

Event
 When an event is detected, an
- test -
Apr-20-2014 02:05:59
M If your model supports an SD card slot, then video is saved in the SD
card, not Google Drive and you can view video in SD player.
SD Card
alarm is received and when image
or video uploading is finished, then
Live Event
 If you select the Google Drive icon/Picasa icon, the linked web page
is displayed.
2. Set the SD card item. SD Card
one more alarm is received. test

Use SD card  You can watch the video only when the Google Drive account is the
• Use SD card : When you set same with the one used in the camera.
motion/audio, the video will be Continuous Recording


Live Event Pl
Playback
ayback Setup

automatically saved in the SD If continuous recording is not selected, only If you download a file, you can play the video on a video player. But, if
Motion and Audio detected video clips will be

card.
saved.
the video player has no codec installed to support the video, the
SD card Overwrite video won't be played smoothly so please install the codec that
• Continuous Recording : Video supports H.264 and G.711 first.
is saved regardless of the event Status Format

that occurs. Size (Free/Total) : 3.18 / 3.66 GB

• SD card Overwrite : If the SD

card capacity is insufficient,
then it will automatically start
overwriting the oldest data.
• Status : Check the remaining Cancel Apply

capacity of the SD card.

• Format : Delete all the data in the SD card.
3. Tap <Apply>.

Downloaded from www.Manualslib.com manuals search engine

 7. Playback
Deleting All Events SD Save 5. On the screen, a circular shaped Playback

2014.04.01
timeline (24 hours) will be
1. If you tap the Menu button of the Event
Apr-20-2014 J  Continuous recording automatically saves video to SD memory every displayed. The time zone with
09:04:57 ►
mobile device, the <Delete All> 14:26:23 five minutes. the search data is classified by

Apr-20-2014
dialog pops up. 14:25:30 Manual recording runs if you press the manual recording button in colors.
Apr-20-2014

2. Tap on the <Delete All> to clear 14:24:20 live screen. If you switch to another screen without turning it off, 6. Check the timeline and drag it
the event list.
Apr-20-2014

14:22:18
video will be saved for additional 30 seconds before stopping. to the desired playing time
Apr-20-2014

14:21:18  Event recording saves motion or audio for thirty seconds and if [ ] to set the video playing
Apr-20-2014 motion or audio is detected again in the meantime, the amount of start time or enter the time on
14:19:24
Apr-20-2014 saving time is extended. your own.
14:18:17
Apr-20-2014  In case of manual/event recording during continuous recording, the • Previous/Next video : Move to
14:17:35
Apr-20-2014
manual/event recording video playing time can be separated by five the previous/next video to the
Previous video Next video
14:16:16 minutes. selected video.
Apr-20-2014 Delete All
14:15:56
1. Tap the <Playback> icon. test
7. Tap the < ► > button. test

Play the video data.

Deleting Each Event J  Only applicable to those models
that provide SD card slots. • / : You can play or pause
08:02:04 08:07:03

1. Tap and hold the desired event to Event the video.

Apr-20-2014

be deleted. 14:26:23
Apr-20-2014
• : Drag the time bar and
14:25:30 play the video at the desired time.
Apr-20-2014

14:24:20
Apr-20-2014

14:22:18
Apr-20-2014

14:21:18 test
Apr-20-2014

14:19:24
Apr-20-2014

14:18:17 Live Event Playback Setup

Apr-20-2014

14:17:35
Apr-20-2014

14:16:16
Apr-20-2014

14:15:56
2. Searchable dates are displayed Playback

on the calendar.
April 2014
Tap the left/right < , >
2. Tap on <OK> to delete the event. Event
Apr-20-2014 button to select between year/ Sun Mon Tue Wed Thu Fri Sat
14:26:23
Apr-20-2014 month in the top of the calendar 30 31 1 2 3 4 5
14:25:30
Apr-20-2014
to move to the previous or next 6 7 8 9 10 11 12
14:24:20 month. 13 14 15 16 17 18 19
Apr-20-2014

14:22:18 20 21 22 23 24 25 26
Apr-20-2014 Delete alert? 3. Select the desired date of search.
14:21:18 27 28 29 30 1 2 3

Apr-20-2014
Cancel
14:19:24
OK
4. Select an event type that you
Apr-20-2014
want to search.
14:18:17
Apr-20-2014

14:17:35
 You can select a saved video type in Type

Apr-20-2014 the playing list. Motion Detection

14:16:16
Apr-20-2014

14:15:56

Downloaded from www.Manualslib.com manuals search engine

 8. Auto Login Setup 9. Alarm setting 10. Info.
1. Move to the <Setup> item. 1. Move to the <Setup> item. Checking the S/W info
Camera Setup About Camera Setup About

2. If you check <Auto 2. Set the alarm for an event.

Auto Login Auto Login
1. Move to the <About> item.
Login> and run the app • Sounds/Vibrate/Non-sounds : Camera Setup About
Setting Alert Setting Alert
when it is terminated, you will be When an event occurs, an alarm 2. You can check the information of Version v2.36
Sounds
automatically logged in. will be displayed as it was set.
Sounds
the currently installed software. Created Date 2014.06.25
Vibrate Vibrate

Non-sounds • Alert Message Pop-up : When Non-sounds

Copyright Samsung Techwin

Alert Message Pop-up

an event occurs, a notification Alert Message Pop-up
This software uses FFmpeg under LGPL v2.1

pop up will appear. Help Guide

Screen off mode Pop-up Screen off mode Pop-up

• Screen off mode Pop-up : When

an event occurs with the screen
turned off, a notification pop up
will appear.

Help guides
1. Move to the <About> item.
2. Tap the <Help Guide> menu to see help.

M  The language set in the mobile device is automatically recognized,

and the app is provided in that language. Help is available in seven
different languages.

Downloaded from www.Manualslib.com manuals search engine

 1. Requirements for mobile devices
Hardware / Operating System Requirements
3. Tap <Start>. Back Create new account

OS - iOS 5.0/6.0/6.1/7.0/7.1
Welcome to
CPU - 1GHz or higher
- 128MB or more (recommended),
RAM
RAM : 50MB (Minimum)
- Must support Wi-Fi or 3G/LTE mobile Setup using 3 simple steps below.
Network
communication

SmartCam
Step 1. Sign up for an account

Step 2. Register your camera

Video Codec - H.264
Step 3. Configure your camera

Recommended mobile devices - iPhone 4/5

Start
Recommended Tablet PC - iPad 3/4
iOS

J  If you use 3G or 4G(LTE) data communication, excessive amount of 4. Enter requested information. Back Create new account

English fees can be billed and may cause data delays or loss. Wi-Fi is
M  Email address is used to search for
ID
Create user ID between 8-14 characters using
letters and/or with numbers
recommended. account ID or password. User ID

Password
5. Read the terms and conditions, Create password between 10-14 characters using
both letters and numbers. Example: samsung135

and tap <Register>. Password

Now you can monitor critical events with your mobile Confirm Password

devices through the SmartCam application. 2. Subscription Name

Enter your name.

Download the application from App Store and install on e-Mail

your mobile devices. 1. Run the downloaded application. Example: [email protected]

I agree to the Samsung Techwin's terms

™ Search keywords for the application: “Samsung SmartCam”, and conditions.

“Smartcam”, “Samsung techwin”, “Techwin”. Terms of Services

Register

2. Tap <Create new account>. 6. Tap <Next> when the menu on ●●●●●●
Login
the completion of a new member Name
Account created. Tap <Next> to
setup the camera.
ID Enter User ID.
registration pops up. test

Cancel Next
Password e-Mail


Enter Password.

Remember me Auto Login M Tap <Add Camera> after logging

in if you are already a member. Logout Camera List Refresh

Login
Add Camera
Forgot your ID?

Forgot your password?

Create new account

Downloaded from www.Manualslib.com manuals search engine

 Wi-Fi Direct connection 10. After selecting a camera to 12. The LED of the camera will

.
Settings Wi-Fi Registration
connect, tap <Next>. Wi-Fi
turn into green if a camera is
M  You can only use it in a camera that has a Wi-Fi Direct sticker connected to Wi-Fi.
attached to it. M  Select a camera that has the last
DIRECT-037N

 Press the button, "Tap here to add registered camera" when you
four digits of the serial number on CHOOSE A NETWORK...
M  Camera's LED will blink in blue 00 : 02
the back of the product. Apple Network 8dfdc7 while searching for a WiFi router.
register a camera being used in another account, in order to register
it immediately without setting it.  Enter 'smartcam' if a password is
If a connection is made to the WiFi
router, the LED will be blue Please wait until the status
required. design LED on the camera changed
from blue to green.
7. Tap <Wireless Setup>. Back Registration
consistently. After a short while, It takes about 3 minutes.
Cisco_WPS_57090

Is there a WiFi DIRECT

while the camera is connecting to
KT12580
cker on the camera le
sticker lens? the server, the LED will turn green.
Other...
Fi DIRE
Wi

CT

Ask to Join Networks

If yes
yes, select Wireless Setup.
Se
If not, select Optional Setup.
11. Select a WiFi router connected to Back Registration
13. Enter <Camera Name> and Cancel Registration Next

Wireless Optional your camera. Select the WiFi network you

<Camera password> and then
Setup Setup want the camera to connect to.
click <Next>. Create camera name and camera
password.
• : After entering the

Apple Network 8dfdc7
password, connect to a WiFi
M
Tap here to add registered camera
design
Click <Show Password> to check Camera Name

router. your password. Example: Living Room

8. Tap <Next> after connecting Back Registration Next
Cisco_WPS_57090
a camera according to the • : Without the password, you Camera password

KT12580 Use 1 - 8 numbers and/or letters

instructions displayed on the 1 will not be connected to a WiFi
Plug in the power adapter
NETGEAR27
screen. DCIN 5V and connect it to the
camera. Camera can take router. Confirm password

up to 2 minutes to boot
up.
Show Password
• Other WiFi Networks : Enter the
SSID name, security type and
2 password.
When the camera LED
flashes in red, press the
WiFi button on the back
of the camera for 5
If selected, it shows guide If you don't want to save camera
password, please go to settings to disable
seconds.
on SSID and networking "Save camera password".
.

Other WiFi Networks

procedures.
3 14. The camera registration is Registration
The status LED on the
camera will change to light
• Network password : Cancel Registration Connect

green/yellow. Tap <Next>

If you select a WiFi router with completed.
Enter WiFi network password

the password, then the pop up Select <Yes> for a camera

window will prompt you to enter Network password
setting.
the password. Enter password Select <No> to view a live
9. On the next page, select WiFi Back Registration
screen.
Setting on the mobile device.
Go to Settings on your iPhone and select Wi- M  If you failed to register wirelessly, Camera registered successfully.

Fi.
Select a camera that has the last four digits
please try again over a wireline. The camera settings can be set to
of the serial number displayed on the back of
the camera. Q W E R T Y U I O P  Cameras may not be registered
your preference. Continue with the
camera setup?

(If password is requested, enter 'smartcam'.)

A S D F G H J K L
depending on the settings of the
mobile device.
Z X C V B N M
In this case, contact the service No Yes
123 space Next center.
When you return to smartcam app, it will list the
available WiFi networks for the camera to connect to.

Downloaded from www.Manualslib.com manuals search engine

 3. Camera List
Cable connection 10. If the camera is not detected, Cancel Registration Next
Camera Move
please enter the camera serial No camera(s) found.

7. Tap <Optional Setup>. Back Registration number manually. Check the serial number on the back of the
camera and enter it below. 1. Move to the <Camera> item. Logout Camera List Refresh

From the listed active cameras,

Is there a WiFi DIRECT
sticker on the camera lens?
M  For camera’s serial number tap the desired camera’s [ ] on
Add Camera

location, refer to [ ]. the right. test

test2
Fi DIRE Serial number
M  You cannot monitor an inactive
Wi

CT

Enter the 15-digit serial number.

camera.
Q W E R T Y U I O P
 For a Wi-Fi Direct camera, you can
A S D F G H J K L set the wireless network by
If yes, select Wireless Setup.
If not, select Optional Setup. selecting an inactive camera.
Z X C V B N M
Camera Setup About
Wireless Optional 123 space return
Setup Setup
2. Live, Event, Playback and Setup List test

Tap here to add registered camera

11. Enter <Camera Name> and Cancel Registration Next
icons will be displayed.
<Camera password> and then
8. Tap <Next> after connecting Back Registration Next
click <Next>. Create camera name and camera
password.
J  The supported functions may be
a camera according to the different depending on the model.
instructions displayed on the M  Click <Show Password> to check Camera Name

1 your password. Example: Living Room

screen. DCIN 5V Plug in the power adapter

and connect it to the
camera. Camera can take Camera password
up to 2 minutes to boot
up.
Use 1 - 8 numbers and/or letters

Confirm password

2 test
Connect the camera to Show Password
the WiFi router using
network cable.

Live Event Playback Setup

3 If you don't want to save camera

password, please go to settings to disable
Tap <Next> when the
"Save camera password".
camera LED changes to
green.
(For *SNH-1010N, the
power LED turns to white)

12. The camera registration is Registration Delete Camera

completed.
9. Select the camera found and tap Select <Yes> for a camera 1. If you want to delete a registered Logout Camera List Refresh
Cancel Registration Next

<Next>. Found camera(s).

setting. camera, slide it from right to left in Add Camera
Select the camera listed below and tap <Next>. If
the cameras are not listed, enter the camera serial
Select <No> to view a live the camera list.
M  Once the mobile device is
number manually.
C8BG6V2C801011T
C8BG6V2C801011T
screen. 2. Tap <Delete>.
test Delete

connected with the Wi-Fi network


C8AT6V2C400079A

M 3. Tap <OK>.
Camera registered successfully.
like camera, it searches the camera C8AT6V2C400079A Cameras may not be registered
KHNL6V2D70002KN Are you sure you want to remove this

automatically. KHNL6V2D70002KN
depending on the settings of the The camera settings can be set to
camera?

mobile device. your preference. Continue with the

 Cameras already registered are not SMART6411ADT003

In this case, contact the service
camera setup? Cancel OK

searched. center.
No Yes

Serial number

Enter the 15-digit serial number. Camera Setup About

Downloaded from www.Manualslib.com manuals search engine

 4. Live Video
1. Tap the desired camera’s [ ] or Logout Camera List Refresh Live Video No. Description
tap the <Live> icon. Add Camera
c A user can record audio and play the recorded audio

M  If there is the latest version of test  Audio playing through the camera speaker.
 You can record a max of 10 audio files.
Back test Back test
firmware, when you make a live test2

video connection, a pop up will

Information Current audio/video information is displayed.
appear so that you can update your test

camera’s firmware. If you select <Night Vision> in general settings, IR lighting

IR Lighting
will operate for two minutes.
Live Event Playback Setup

2. Enter the <Camera password> Logout Camera List Refresh

J  The supported functions may be different depending on the model.
for the camera selected. This is
the same camera password you
Add Camera
Camera password
 b c       Two-way Audio
created at the time you registered test
|Enter the camera password.
the camera. test2 No. Description Back test

Within 20 seconds, it will start Cancel OK

A user can manually save the video in the SD card.
streaming.

Manual  If there is storage space of 10% while the SD card
Recording overwrite function is not activated, you cannot perform
manual recording.
Q W E R T Y U I O P

A S D F G H J K L
b Capture You can capture and save a still image from the video.

Z X C V B N M The microphone for two-way audio between cameras

Two-way
123 space return
c Audio
and mobile devices is activated. 1. Tap on the Two-way Audio icon.
Camera Setup About
 Refer to the bidirectional audio function. 2. The Mic icon will appear.

M  According to the network service provider’s policy, or the network In general network environments, high quality video is
3. Talk while pressing down the mic icon. The voice can be
connection status, it may take a while to load. provided. heard from the speaker on the camera. After finishing
talking, press down the icon for two seconds so that the
 Depending on the network status or service provider's
audio information will be transmitted through the network.
 HQ policy, HQ video may not be provided. In this case,
video is displayed for seven minutes. 4. Even if you did not activate the two-way audio function,
you can receive the audio sound of the video. In addition,
 In relay mode, no HQ video is provided. For more
the microphone setting should be at least 1 or higher if you
details, refer to "Relay Mode".
want to use the two-way audio function.
The selected melody will be heard through the camera
 
Melody
speaker. J When there are multiple users logged on to the camera, first person
who tap the Talk icon will have the control.

Brightness
control
Adjusts the screen brightness.  While the bidirectional audio is on, you need to tap the bidirectional
audio icon again to cancel the function.
 Flip control Flips the video image.  In relay mode, there is no audio. For more details, refer to "Relay
Mode".
It detects motion within the area set by the user.
 Motion zone
 Refer to the motion zone functions.

Downloaded from www.Manualslib.com manuals search engine

 Motion zone Relay mode General setting
If the network condition is not good and a connection is 1. Tap <General>. Back General Apply

unstable, then you can use the relay mode to view video for
seven minutes. 2. Configure the basic camera Camera Name test

When the relay mode connection is made, the [ ] mark is settings.

displayed on the video, and to maintain stable connections, Speaker

there will be no audio or HQ video. • Camera Name : Camera name is

Mic
used to easily identify the camera
when you have more than one.
J  If the router UPnP setting is not set, then a relay mode connection

.
Audio REC

Cancel Clear OK
can be made. Depending on the model of router used, a different • Speaker/Mic : Adjust the
Night Vision
setting method is used. Refer to the user manual. volume for the camera’s built-in
1. Tap the motion zone icon.
 If a camera is connected to the multiple router, or the wired/wireless mic or speaker. WDR

2. Connect to the motion zone mode. network environments for camera and mobile device are unstable, a Display date

relay mode connection can be made. M  If you set the mic to zero, there will be no
3. After touching the video, drag it to set the area.
 live sound and no audio event and also Save camera password
If you have trouble connection to the camera, visit "http://www.
 You can set a max of three motion zones. there is no recording in the SD card.

.
Change camera password
samsungsmartcam.com", go to support page, and refer to
4. If you want to run the motion zone in the area set, tap "Troubleshooting" on it. • Audio REC : The voice can be
Back Audio List
<OK>. recorded or deleted by users.
 Motion is detected only in the set area. • Night Vision : Set the IR lighting.
01. Add personalized audio clip

Check <Night Vision> to set 02. Add personalized audio clip

 Motion zone function only operates if motion detection is activated. In the camera to switch to the 03. Add personalized audio clip
<Setup> - <Event>, set motion detection. night vision mode automatically.
04. Add personalized audio clip

5. To delete the set area, press <Clear> and <OK>.

M  In the case of SNH-1010N, you can 05. Add personalized audio clip
If you want to exit the motion zone setting mode, tap check <Night Vision> for a
<Cancel>. 5. Camera Setup camera to automatically operate the
06. Add personalized audio clip

07. Add personalized audio clip

Tap the <Setup> icon to configure a camera to be monitored. IR lighting for two minutes
To control digital zooming depending on the brightness of the 08. Add personalized audio clip

List test Back Setup neighboring areas. 09. Add personalized audio clip

• WDR : You can compensate for 10. Add personalized audio clip

You can also zoom in by pinch open using two the backlight by making a dark
fingers on the screen. To zoom out, pinch close area brighter, and a bright area Back Password Apply

on the screen. darker. Current Password

Touch and hold to drag the screen in any
direction to reveal the hidden part of the image test
 SNH-P6410BN supported
New Password
if enlarged bigger than the screen.
General
• Display date : Displays the date/ Use 1 - 8 numbers and/or letters

test Network time on the live video. Confirm password

Show Password
Time • Save camera password : You
M  Current digital zooming level is noted next to the digital zoom box, Event
will be connected to your
and digital zooming supports zooming up to x4. Live Event Playback Setup
camera without having to enter
SD Card
the password.
• Change camera password :
Change the current camera If you don't want to save camera password,
password. please go to settings to disable "Save
camera password".

Downloaded from www.Manualslib.com manuals search engine

 • status LED : You can turn on or off the LED on your camera. Event setting Setting Google Drive
• Firmware Version : You can check the current version and
1. Tap the <Event>. You can set the Google Drive through request for authentication.
the latest distributed version and even make updates. Back Event Apply

If there is the latest version of firmware, when you make a live 2. Set your event items. Event alert 1. Log onto the Google account. Back Google Drive
video connection, a pop up will appear so that you can update
your camera’s firmware. • Event alert : Detection of 2. Tap <Accept>. Login to your Google account to receive the
Motion Detection authentication code.
motion/audio or saving of video An authentication code is
3. Tap <Apply>.
in the Picasa or Google drive is Sensitivity
created.
This app would like to:


J The supported functions may be different depending on the model. notified to the user. View and manage Google Drive files

Audio Detection
3. Tap <Send authentication that you have opened or created with
this app
• Motion/Audio Detection : code>. View metadata for files and documents
Specify whether to trigger the Sensitivity
Google Drive setting is in your Google Drive

Network setting alarm or not, and specify the completed. Google Drive for Samsung SmartCam and Google will use
sensitivity.

.
Google account setup this information in accordance with their respective terms of
service and privacy policies.
1. Tap the <Network>. Back Network The higher the sensitivity is, the Cancel Accept

2. Configure the wireless network. WiFi subtler motion/audio events will Picasa

Authentication code
From the list below. Please select the
be detected. You can use your Google account to store
event detected images to Google+
tore
ore

• WiFi : Display the list of WiFi WiFi network you wish to use.

router that you can use. • Google account setup : You Send authentication code
Apple Network 8dfdc7
can upload pictures on Picasa Cancel Google OK


design

M If the Wi-Fi receiving sensitivity is

poor, receiving a video may not
Cisco_WPS_57090
through the Google account.
When an event is detected, camera will
automatically upload images to your
Back Google Drive

work properly. Move the location of KT12580

M  If you wish to send an event alarm Google+ account as a private photo.
Login to your Google account to receive the
Google e-Mail authentication code.
to the Picasa/Google drive, you
the camera to adjust receiving NETGEAR27
xxxxxxx
must register the Google account
sensitivity. Google password Please copy this code, switch to your application
first. and paste it there:
4/RF6he608emlcKYoh************************

• Picasa : Sends event images to Show Password

Need to create a Google

the user’s Picasa account. account.
Move
.

Other WiFi Networks

• Google Drive : A 30-second If you cannot access a Google account,

then log into the following Google page
video clip is uploaded to permit access and try again.
Time setting Permit Google access Move
automatically to the user's
1. Tap <Time>. Google Drive account. Authentication code
Back Time Apply
4/RF6he608emlcKYoh************************

2. Set the camera’s clock. Time 2014-04-20 09:20:05

J  If your model supports an SD card Send authentication code

• Time zone : Select your region. Time zone slot, then video is saved in the SD card, not Google Drive.
(GMT) Greenwich Mean Time

• Daylight Saving Time : Check 3. Tap <Apply>.

Daylight Saving Time
this option if you live in a country
or region where DST(Daylight J  The supported functions may be different depending on the model.
Saving Time) is applied.

Downloaded from www.Manualslib.com manuals search engine

 6. Event List
SD card setting 1. Tap the <Event> icon, and the List test 2. Detected events will be saved in the server and displayed in
Google Drive and the Picasa the event list.
J  Only applicable to those models that provide SD card slots. event link are displayed. Google Drive icon: Tap
 You need to purchase an SD card if you want to use it.
M  Events are listed only when you
the Google Drive icon to
 Note that inserting an SD card which has been used for other have registered the Google account
play video.
purposes into the camera may delete the data. and set the Google Drive/Picasa.

Back Event Edit

Before removing the SD card, deactivate the Use SD card setting. Apr-20-2014

If not, the SD card can get damaged. Audio 14:26:23 Picasa icon:
Detection icon Apr-20-2014
Tap on the Picasa icon
test 14:25:30
to see picture.
1. Tap <SD Card>. Back Setup
Apr-20-2014

14:24:20
Apr-20-2014

Live Event Playback Setup

Motion Detection 14:22:18
Icon Apr-20-2014

14:21:18
Apr-20-2014

14:19:24

M 
Apr-20-2014

You will get a notification prompt Back Setup 14:18:17

test Apr-20-2014
when event is detected by the 14:17:35
General camera. Apr-20-2014

14:16:16
Network  While uploading files in Google Apr-20-2014

14:15:56
Time Drive or Picasa, no event is Motion Detection
- test -
detected.
M 
Apr-20-2014 09:21:18
Event test If your model supports an SD card slot, then video is saved in the SD
SD Card
 When an event is detected, an Live
card, not Google Drive and you can view video in SD player.
General
alarm is received and when image
or video uploading is finished, then Network
Event
 If you select the Google Drive icon/Picasa icon, the linked web page
Cancel
is displayed.
2. Set the SD card item. one more alarm is received.

Back SD Card Apply Time
You can watch the video only when the Google Drive account is the
• Use SD card : When you set Use SD card Event
same with the one used in the camera.
motion/audio, the video will be
automatically saved in the SD
Continuous Recording
If continuous recording is not selected,
ed,
d only
o
SD Card
 If you download a file, you can play the video on a video player. But, if
Motion and Audio detected video clipsips will
card. be saved. the video player has no codec installed to support the video, the
video won't be played smoothly so please install the codec that
• Continuous Recording : Video SD card Overwrite
supports H.264 and G.711 first.
is saved regardless of the event
that occurs. Status Format

• SD card Overwrite : If the SD Size (Free/Total) : 3.18 / 3.66 GB

card capacity is insufficient,

then it will automatically start
overwriting the oldest data.
• Status : Check the remaining
capacity of the SD card.
• Format : Delete all the data in the SD card.
3. Tap <Apply>.

Downloaded from www.Manualslib.com manuals search engine

 7. Playback
Deleting All Events SD Save 5. On the screen, a circular shaped Back Playback ►
timeline (24 hours) will be
1. After tapping <Edit>, tap Delete Event Finish
J  Continuous recording automatically saves video to SD memory every displayed. The time zone with 2014.04.01 09:04:57

<Delete>. Apr-20-2014 five minutes. the search data is classified by

14:26:23
2. Tap on the <Delete All> to clear Apr-20-2014

14:25:30
 Manual recording runs if you press the manual recording button in colors.
the event list. Apr-20-2014
live screen. If you switch to another screen without turning it off,
14:24:20 6. Check the timeline and drag it to
video will be saved for additional 30 seconds before stopping.
Apr-20-2014
the desired playing time [ ] to
14:22:18
Apr-20-2014
 Event recording saves motion or audio for thirty seconds and if set the video playing start time or
14:21:18 motion or audio is detected again in the meantime, the amount of enter the time on your own.
Apr-20-2014

14:19:24 saving time is extended.

• Previous/Next video : Move to
Apr-20-2014

14:18:17  In case of manual/event recording during continuous recording, the the previous/next video to the
Apr-20-2014

14:17:35
manual/event recording video playing time can be separated by five selected video.
Delete All Previous video Next video
Apr-20-2014 minutes.
14:16:16
Cancel
Apr-20-2014

14:15:56
1. Tap the <Playback> icon. List test 7. Tap the < ► > button. Back test

Deleting Each Event J  Only applicable to those models Play the video data.
that provide SD card slots. • / : You can play or pause
1. After tapping <Edit> tap [ ]. the video. 00:39:58 00:44:57
Delete Event Finish

Apr-20-2014 • : Drag the time bar and play the video at the desired
14:26:23
Apr-20-2014 time.
14:25:30
Apr-20-2014

14:24:20
Apr-20-2014
test
14:22:18
Apr-20-2014

14:21:18
Apr-20-2014

14:19:24 Live Event Playback Setup

Apr-20-2014

14:18:17
Apr-20-2014

14:17:35
Apr-20-2014

14:16:16 2. Searchable dates are displayed Back Playback

Apr-20-2014

14:15:56
on the calendar. ◄ Apr 2014 ►
Sun Mon Tue Wed Thu Fri Sat

Tap the left/right < , > 30 31 1 2 3 4 5

2. Tap on <Delete> to delete the Delete Event Finish button to select between year/
6 7 8 9 10 11 12
event. Apr-20-2014
Delete
month in the top of the calendar
14:26:23 13 14 15 16 17 18 19
Apr-20-2014
to move to the previous or next
14:25:30 month. 20 21 22 23 24 25 26
Apr-20-2014

14:24:20 27 28 29 30 1 2 3
Apr-20-2014 3. Select the desired date of search.
14:22:18
Apr-20-2014

14:21:18 4. Select an event type that you

Apr-20-2014

14:19:24 want to search.

Apr-20-2014

14:18:17  You can select a saved video type in Type

Apr-20-2014 the playing list. Motion Detection

14:17:35
Apr-20-2014

14:16:16
Apr-20-2014

14:15:56

Downloaded from www.Manualslib.com manuals search engine

 8. Auto Login Setup 9. Alarm setting 10. Info.
1. Move to the <Setup> item. Logout Setup 1. Move to the <Setup> item. Logout Setup Checking the S/W info
2. If you activate <Auto Login>, Auto Login Auto Login
1. Move to the <About> item. Logout About
then when the app is terminated, Setting Alert ON Setting Alert ON

you can set the app to You can change Push Alert settings in iPhone
Settings>Notifications.
You can change Push Alert settings in iPhone
Settings>Notifications.
2. You can check the information of Version v2.36

automatically log in. the currently installed software. Created Date 2014. 06. 25

Copyright Samsung Techwin

This software uses FFmpeg under LGPL v2.1

Help Guide

Camera Setup About Camera Setup About

Camera Setup About

2. From pop-up and push notice,
.

Back SmartCam

you can select the SmartCam ALERT STYLE

notice on the Setting menu of the

mobile device. Help guides
None Banners Alerts
1. Move to the <About> item.
Alerts require an action before proceeding.
Banners appear at the top of the screen and
go away automatically.
2. Tap the <Help Guide> menu to see help.

Badge App Icon

M  The language set in the mobile device is automatically recognized,
Sounds and the app is provided in that language. Help is available in seven
different languages.
ALERTS

Show in Notification Center

.

Include 5 Recent Items

ms

Downloaded from www.Manualslib.com manuals search engine

 How to check
1. Visit to http://www.pcwintech.com/shanes-toolbox
2. Download “Detect Multiple Routers” program.

Network Troubleshooting Guide 3. Unzip it.

SNH-E6440BN 4. Click “detect_routers” to run it.

5. Click “Check now” and you can see the
number of Routers Detected.

PROBLEM CASE 01
1. “Relay Mode” on your phone.
2. No Sound.
3. The mobile Viewer closed automatically after 3 minutes.

Reason
The connection between the camera and your phone is not stable.

Solution
Case 1
In case you use 2 more routers. (Cascade connection)

Internet

1st Router 2nd Router

English · 1

Downloaded from www.Manualslib.com manuals search engine

 Solution 1 Case 3
Make a connection with 1st router. “UPnP Port Forwarding” function is disabled in your router.

Solution
Enable the function referring to your router manual.

Case 4
Router supports UPnP port Forwarding and this function is enabled.
Internet
Solution
1st Router 2nd Router
• Power On/Off.
Solution 2 • Or push the reset button on your router for initializing your router.
• Or contact to your router manufacturer or Internet Service Provider.
Change 2nd router to a switch hub.

Internet

1st Router Switch Hub

Case 2
Router doesn’t support UPnP Port Forwarding.

How to check
Refer to your router manual or contact to the manufacturer of your router.

Solution
In case your router doesn’t support it, buy new one, please.

English · 2

Downloaded from www.Manualslib.com manuals search engine

 OPEN SOURCE ANNOUNCEMENT AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
Some software components of this product incorporate OWNER OR CONTRIBUTORS BE LIABLE FOR ANY
source code covered under the BSD license as follows. DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
Component Name License License URL
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
http://www.opensource.org/
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
lighttpd 1.4.25 l BSD 2.0 BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
licenses/bsd-license.html
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
librtp 1.20 BSO 1.0 STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
http://www.net-snmp.org OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
net-snmp-5.4 BSO
/about/license.html THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
lighttpd is a secure, fast, compliant, and very flexible web-server
that has been optimized for high-performance environments. It Copyright (c) 1998-2001 University College London
has a very low memory footprint compared to other webservers All rights reserved.
and takes care of cpu-load. Its advanced feature-set (FastCGI,
Redistribution and use in source and binary forms, with or
CGI, Auth, Output-Compression, URL-Rewriting and many
without modification, is permitted provided that the following
more) make lighttpd the perfect webserver-software for every
conditions are met :
server that suffers load problems.
1. Redistributions of source code must retain the above copyright
Simple Network Management Protocol (SNMP) is an Internet-
notice, this list of conditions and the following disclaimer.
standard protocol for managing devices on IP networks. It
is used mostly in network management systems to monitor 2. Redistributions in binary form must reproducathe above
the devices attached to the network for conditions that need copyright notice, this list of conditions and the following
administrative attention. Net-SNMP is a suite of applications disclaimer in the documentation and/or other materials
used to implement SNMP v1 , SNMP v2c and SNMP v3 using provided with the distribution.
both 1Pv4 and 1Pv6. 3. All advertising materials mentioning features or use of this
For more additional information, send email to help.cctv@ software must display the following acknowledgement:
samsung.com. This product includes software developed by the Computer
Science Department at University College London.
Copyright (C) 2004, Kneschke, incremental
4. Neither the name of the University nor of the Department .
All rights reserved.
may be used to endorse or promote products derived from
Redistribution and use in source and binary forms, with or this software without specific prior written permission.
without modification, are permitted provided that the following
THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND
conditions are met :
CONTRIBUTORS "AS IS" AND ANY EXPRESSED OR IMPLIED
- Redistributions of source code must retain the above copyright WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
notice, this list of conditions and the following disclaimer. IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- Redistributions in binary form must reproduce the above FOR A PARTICULAR PURPOSEARE DISCLAIMED. IN NO
copyright notice, this list of conditions and the following EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE
disclaimer in the documentation and/or other materials LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
provided with the distribution. EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- Neither the name of the 'incremental' nor the names of its GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
contributors may be used to endorse or promote products derived OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
from this software without specific prior written permission. ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY SUCH DAMAGE.

Downloaded from www.Manualslib.com manuals search engine

 LICENSE THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS
Various copyrights apply to this package, listed in various separate OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
parts below. Please make sure that you read all the parts. TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
Part 1: CMUIUCD copyright notice: (BSD like) AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
Copyright 1989, 1991, 1992 by Carnegie Mellon University
HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY
Derivative Work - 1996, 1998-2000
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
Copyright 1996, 1998-2000 The Regents of the University of California
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
All Rights Reserved LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
Permission to use, copy, modify and distribute this software SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
and its documentation for any purpose and without fee is INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
hereby granted, provided that the above copyright notice OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
appears in all copies and that both that copyright notice and TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
this permission notice appear in supporting documentation, IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
and that the name of CMU and The Regents of the University ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
of California not be used in advertising or publicity pertaining to Part 3: Cambridge Broadband Ltd. copyright notice (BSD)
distribution of the software without specific written permission.
Portions of this code are copyright (c) 2001-2003, Cambridge
CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA Broadband Ltd.
DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
All rights reserved.
SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL CMU Redistribution and use in source and binary forms, with or
OR THE REGENTS OF THE UNIVERSITY OF CALIFORNIA BE without modification, are permitted provided that the following
LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL conditions are met:
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING • Redistributions of source code must retain the above copyright
FROM THE LOSS OF USE, DATA OR PROFITS, WHETHER IN AN notice, this list of conditions and the following disclaimer.
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
ACTION , ARISING OUT OF OR IN CONNECTION WITH THE USE • Redistributions in binary form must reproduce the above
OR PERFORMANCE OF THIS SOFTWARE. copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
Part 2: Networks Associates Technology, Inc copyright provided with the distribution.
notice (BSD)
• The name of Cambridge Broadband Ltd. may not be used
Copyright (c) 2001-2003, Networks Associates Technology, Inc to endorse or promote products derived 1rom this software
All rights reserved. without specific prior written permission.
Redistribution and use in source and binary forms, with or THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER
without modification, are permitted provided that the following "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
conditions are met: INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
• Redistributions of source code must retain the above copyright
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
notice, this list of conditions and the following disclaimer.
SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
• Redistributions in binary form must reproduce the above DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
copyright notice, this list of conditions and the following OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
disclaimer in the documentation and/or other materials LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
provided with the distribution. SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
• Neither the name of the Networks Associates Technology, INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
Inc nor the names of its contributors may be used to OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
endorse or promote products derived from this software OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
without specific prior written permission. ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Downloaded from www.Manualslib.com manuals search engine

 Part 4: Sun Microsystems, Inc. copyright notice (BSD) • Redistributions of source code must retain the above copyright
Copyright © 2003 Sun Microsystems, Inc., 4150 Network notice, this list of conditions and the following disclaimer.
Circle, Santa Clara, • Redistributions in binary form must reproduce the above
California 95054, U.S.A. copyright notice, this list of conditions and the following
All rights reserved. disclaimer in the documentation and/or other materials
provided with the distribution.
Use is subject to license terms below. This distribution
may include materials developed by third parties. Sun, Sun • Neither the name of Sparta, Inc nor the names of its contributors
Microsystems, the Sun logo and Solaris are trademarks or may be used to endorse or promote products derived from this
registered trademarks of Sun Microsystems, Inc. in the U.S. software without specific prior written permission.
and other countries. Redistribution and use in source and THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
binary forms, with or without modification, are permitted HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS
provided that the following conditions are met: OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
• Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer. AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
• Redistributions in binary form must reproduce the above HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY
copyright notice, this list of conditions and the following DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
disclaimer in the documentation and/or other materials CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
provided with the distribution. TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
• Neither the name of the Sun Microsystems, Inc. nor the LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
names of its contributors may be used to endorse or INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
promote products derived from this software without specific OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
prior written permission. OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED Part 6: Cisco/BUPTNIC copyright notice (BSD)
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY Copyright (c) 2004, Cisco, Inc and Information Network Center
AND FITNESS FOR A PARTICULAR PURPOSE ARE of Beijing University of Posts and Telecommunications.
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY All rights reserved.
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, Redistribution and use in source and binary forms, with or
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT without modification, are permitted provided that the following
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS conditions are met:
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON • Redistributions of source code must retain the above copyright
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, notice, this list of conditions and the following disclaimer.
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR • Redistributions in binary form must reproduce the above
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF copyright notice, this list of conditions and the following
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF disclaimer in the documentation and/or other materials
SUCH DAMAGE. provided with the distribution.
Part 5: Sparta, Inc copyright notice (BSD) • Neither the name of Cisco, Inc, Beijing University of Posts
and Telecommunications, nor the names of their contributors
Copyright (c) 2003-2009, Sparta, Inc
may be used to endorse or promote products derived from
All rights reserved. this software without specific prior written permission.
Redistribution and use in source and binary forms, with or THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
without modification, are permitted provided that the following HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS
conditions are met: OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED

Downloaded from www.Manualslib.com manuals search engine

 TO, THE IMPLIED WARRANTIES OF MERCHANTABILI1Y OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
AND FITNESS FOR A PARTICULAR PURPOSE ARE POSSIBILI1Y OF SUCH DAMAGE.
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY
Part 8: Apple Inc. copyright notice (BSD)
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, Copyright (c) 2007 Apple Inc.
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
All rights reserved.
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR Redistribution and use in source and binary forms, with or
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON without modification, are permitted provided that the following
ANY THEORY OF LIABILI1Y, WHETHER IN CONTRACT, conditions are met:
STRICT LIABILI1Y, OR TORT (INCLUDING NEGLIGENCE OR
1. Redistributions of source code must retain the above copyright
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILI1Y OF notice, this list of conditions and the following disclaimer.
SUCH DAMAGE. 2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
Part 7: Fabasoft R&D Software GmbH & Co KG documentation and/or other materials provided with the distribution.
copyright notice (BSD)
3. Neither the name of Apple Inc. ("Apple") nor the names of its
Copyright (c) Fabasoft R&D Software GmbH & Co KG, 2003 contributors may be used to endorse or promote products derived
oss@fabasoft .com from this software without specific prior written permission.
Author: Bernhard Penz
THIS SOFTWARE IS PROVIDED BY APPLE AND ITS
Redistribution and use in source and binary forms, with or CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
without modification, are permitted provided that the following WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
conditions are met: IMPLIED WARRANTIES OF MERCHANTABILI1Y AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
• Redistributions of source code must retain the above
EVENT SHALL APPLE OR ITSCONTRIBUTORS BE LIABLE FOR
copyright notice, this list of conditions and the following
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
disclaimer.
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
• Redistributions in binary form must reproduce the above LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
copyright notice, this list of conditions and the following SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
disclaimer in the documentation and/or other materials INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
provided with the distribution. OF LIABILI1Y, WHETHER IN CONTRACT, STRICT LIABILI1Y,
• The name of Fabasoft R&D Software GmbH & Co KG or any OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
of its subsidiaries, brand or product names may not be used ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
to endorse or promote products derived from this software EVEN IF ADVISED OF THE POSSIBILI1Y OF SUCH DAMAGE.
without specific prior written permission. Part 9: Sciencelogic, LLC copyright notice (BSD)
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER Copyright (c) 2009, ScienceLogic, LLC
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES All rights reserved.
OF MERCHANTABILI1Y AND FITNESS FOR A PARTICULAR Redistribution and use in source and binary forms, with or
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE without modification, are permitted provided that the following
COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, conditions aremet:
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
• Redistributions of source code must retain the above copyright
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
notice, this list of conditions and the following disclaimer.
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER • Redistributions in binary form must reproduce the above
CAUSED AND ON ANY THEORY OF LIABILI1Y, WHETHER copyright notice, this list of conditions and the following
IN CONTRACT, STRICT LIABILI1Y, OR TORT (INCLUDING disclaimer in the documentation and/or other materials
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT provided with the distribution.

Downloaded from www.Manualslib.com manuals search engine

 • Neither the name of ScienceLogic, LLC nor the names of its This General Public License applies to most of the Free
contributors may be used to endorse or promote products Software Foundation's software and to any other program
derived from this software without specific prior written whose authors commit to using it. (Some other Free Software
permission. Foundation software is covered by the GNU Lesser General
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS Public License instead.) You can apply it to your programs, too.
AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED When we speak of free software, we are referring to freedom,
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED not price.
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
Our General Public Licenses are designed to make sure that
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
you have the freedom to distribute copies of free software (and
SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
charge for this service if you wish), that you receive source
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
code or can get it if you want it, that you can change the
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
software or use pieces of it in new free programs ; and that you
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
know you can do these things.
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON To protect your rights, we need to make restrictions that forbid
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT anyone to deny you these rights or to ask you to surrender the
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) rights. These restrictions translate to certain responsibilities for
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, you if you distribute copies of the software, or if you modify it.
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. For example, if you distribute copies of such a program,
GPL/LGPL SOFTWARE LICENSE whether gratis or for a fee, you must give the recipients all the
rights that you have.
The software included in this product contains copyrighted
software that is licensed under the GPULGPL. You may obtain You must make sure that they, too, receive or can get the source
the complete Corresponding Source code from us for a period code. And you must show them these terms so they know their rights.
of three years after our last shipment of this product by sending We protect your rights with two steps :
email to [email protected]
(1)copyright the software, and (2)offer you this license which gives
If you want to obtain the complete Corresponding Source code you legal permission to copy, distribute and/or modify the software.
in the physical medium such as CD-ROM, the cost of physically
performing source distribution might be charged. Also, for each author's protection and ours, we want to make
certain that everyone understands that there is no warranty for
• GPLS/W this free software. If the software is modified by someone else
- Base Kernel, Busybox, Sysvinit, dosfstools and passed on, we want its recipients to know that what they
have is not the original, so that any problems introduced by
• LGPLS/W others will not reflect on the original authors' reputations.
- glibc, lnetutils Finally, any free program is threatened constantly by software
GNU GENERAL PUBLIC LICENSE patents. We wish to avoid the danger that redistributors of a
free program will individually obtain patent licenses, in effect
Version 2, June 1991 making the program proprietary. To prevent this, we have
Copyright (C)1989, 1991 Free Software Foundation, Inc. made it clear that any patent must be licensed for everyone's
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA free use or not licensed at all.
Everyone is permitted to copy and distribute verbatim copies of The precise terms and conditions for copying, distribution and
this license document, but changing it is not allowed. modification follow.
Preamble
TERMS AND CONDITIONS FOR COPYING,
The licenses for most software are designed to take away your DISTRIBUTION AND MODIFICATION
freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share Version 2, June 1991 Copyright (C) 1989, 1991 Free Software
and change free software-- to make sure the software is free Foundation, Inc. 51 Franklin S
for all its users. 0. This License applies to any program or other work which

Downloaded from www.Manualslib.com manuals search engine

 contains a notice placed by the copyright holder saying it may These requirements apply to the modified work as a whole.
be distributed under the terms of this General Public License. If identifiable sections of that work are not derived from the
The "Program", below, refers to any such program or work, Program, and can be reasonably considered independent and
and a "work based on the Program" means either the Program separate works in themselves, then this License, and its terms,
or any derivative work under copyright law : that is to say, a do not apply to those sections when you distribute them as
work containing the Program or a portion of it, either verbatim separate works. But when you distribute the same sections
or with modifications and/or translated into another language. as part of a whole which is a work based on the Program, the
(Hereinafter, translation is included without limitation in the term distribution of the whole must be on the terms of this License,
"modification".) Each licensee is addressed as "you". whose permissions for other licensees extend to the entire whole,
Activities other than copying, distribution and modification and thus to each and every part regardless of who wrote it.
are not covered by this License ; they are outside its scope.
Thus, it is not the intent of this section to claim rights or contest
The act of running the Program is not restricted, and the
your rights to work written entirely by you ; rather, the intent
output from the Program is covered only if its contents
is to exercise the right to control the distribution of derivative
constitute a work based on the Program (independent of
or collective works based on the Program. In addition, mere
having been made by running the Program). Whether that is
aggregation of another work not based on the Program with
true depends on what the Program does.
the Program (or with a work based on the Program)on a
1. You may copy and distribute verbatim copies of the Program's volume of a storage or distribution medium does not bring the
source code as you receive it, in any medium, provided that other work under the scope of this License.
you conspicuously and appropriately publish on each copy
an appropriate copyright notice and disclaimer of warranty; 3. You may copy and distribute the Program (or a work based
keep intact all the notices that refer to this License and to the on it, under Section 2)in object code or executable form
absence of any warranty ; and give any other recipients of the under the terms of Sections 1 and 2 above provided that
Program a copy of this License along with the Program. you also do one of the following :
You may charge a fee for the physical act of transferring a a) Accompany it with the complete corresponding machine-
copy, and you may at your option offer warranty protection in readable source code, which must be distributed under
exchange for a fee. the terms of Sections 1 and 2 above on a medium
2. You may modify your copy or copies of the Program or any customarily used for software interchange; or,
portion of it, thus forming a work based on the Program, b) Accompany it with a written offer, valid for at least three
and copy and distribute such modifications or work under years, to give any third party, for a charge no more than
the terms of Section 1 above, provided that you also meet your cost of physically performing source distribution, a
all of these conditions : complete machinereadable copy of the corresponding
a) You must cause the modified files to carry prominent notices source code, to be distributed under the terms of
stating that you changed the files and the date of any change. Sections 1 and 2 above on a medium customarily used
for software interchange ; or,
b) You must cause any work that you distribute or publish, that
in whole or in part contains or is derived from the Program c) Accompany it with the information you received as to
or any part thereof, to be licensed as a whole at no charge the offer to distribute corresponding source code. (This
to all third parties under the terms of this License. alternative is allowed only for noncommercial distribution
and only if you received the program in object code
c) If the modified program normally reads commands or executable form with such an offer, in accord with
interactively when run, you must cause it, when started Subsection b above.)
running for such interactive use in the most ordinary way, to
The source code for a work means the preferred form of the work
print or display an announcement including an appropriate
for making modifications to it. For an executable work, complete
copyright notice and a notice that there is no warranty (or
source code means all the source code for all modules it contains,
else, saying that you provide a warranty) and that users
plus any associated interface definition files, plus the scripts used
may redistribute the program under these conditions,
to control compilation and installation of the executable. However,
and telling the user how to view a copy of this License.
as a special exception, the source code distributed need not
(Exception: if the Program itself is interactive but does not
include anything that is normally distributed (in either source or
normally print such an announcement, your work based on
binary form)with the major components (compiler, kernel, and so
the Program is not required to print an announcement.)

Downloaded from www.Manualslib.com manuals search engine

 on)of the operating system on which the executable runs, unless If any portion of this section is held invalid or unenforceable
that component itself accompanies the executable. under any particular circumstance, the balance of the section
If distribution of executable or object code is made by offering is intended to apply and the section as a whole is intended
access to copy from a designated place, then offering equivalent to apply in other circumstances. It is not the purpose of this
access to copy the source code from the same place counts as section to induce you to infringe any patents or other property
distribution of the source code, even though third parties are not right claims or to contest validity of any such claims; this
compelled to copy the source along with the object code. section has the sole purpose of protecting the integrity of the
free software distribution system, which is implemented by
4. You may not copy, modify, sublicense, or distribute the public license practices. Many people have made generous
Program except as expressly provided under this License. contributions to the wide range of software distributed through
Any attempt otherwise to copy, modify, sublicense or that system in reliance on consistent application of that system
distribute the Program is void, and will automatically ; it is up to the author/donor to decide if he or she is willing to
terminate your rights under this License. distribute software through any other system and a licensee
However, parties who have received copies, or rights, from cannot impose that choice.
you under this License will not have their licenses terminated This section is intended to make thoroughly clear what is
so long as such parties remain in full compliance. believed to be a consequence of the rest of this License.
5. You are not required to accept this License, since you have 8. If the distribution and/or use of the Program is restricted
not signed it. in certain countries either by patents or by copyrighted
However, nothing else grants you permission to modify or interfaces, the original copyright holder who places the
distribute the Program or its derivative works. Program under this License may add an explicit geographical
These actions are prohibited by law if you do not accept this distribution limitation excluding those countries, so that
License.Therefore, by modifying or distributing the Program distribution is permitted only in or among countries not
(or any work based on the Program), you indicate your thus excluded. In such case, this License incorporates the
acceptance of this License to do so, and all its terms and limitation as if written in the body of this License.
conditions for copying, distributing or modifying the Program
or works based on it. 9. The Free Software Foundation may publish revised and/or new
versions of the General Public License from time to time. Such
6. Each time you redistribute the Program (or any work based new versions will be similar in spirit to the present version, but
on the Program), the recipient automatically receives a may differ in detail to address new problems or concerns.
license from the original licensor to copy, distribute or modify
Each version is given a distinguishing version number. If the
the Program subject to these terms and conditions.
Program specifies a version number of this License which applies
You may not impose any further restrictions on the
to it and "any later version", you have the option of following the
recipients' exercise of the rights granted herein.
terms and conditions either of that version or of any later version
You are not responsible for enforcing compliance by third
published by the Free Software Foundation. If the Program does
parties to this License.
not specify a version number of this License, you may choose
7. If, as a consequence of a court judgment or allegation of any version ever published by the Free Software Foundation.
patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you {whether 10. If you wish to incorporate parts of the Program into other
by court order, agreement or otherwise)that contradict the free programs whose distribution conditions are different,
conditions of this License, they do not excuse you from the write to the author to ask for permission. For software which
conditions of this License. If you cannot distribute so as to is copyrighted by the Free Software Foundation, write to the
satisfy simultaneously your obligations under this License Free Software Foundation ; we sometimes make exceptions
and any other pertinent obligations, then as a consequence for this. Our decision will be guided by the two goals of
you may not distribute the Program at all. preserving the free status of all derivatives of our free software
For example, if a patent license would not permit royalty-free and of promoting the sharing and reuse of software generally.
redistribution of the Program by qjl those who receive copies NO WARRANTY
directly or indirectly through you, then the only way you
could satisfy both it and this License would be to refrain 11. BECAUSE THE PROGRAM IS LICENSED FREE
entirely from distribution of the Program. OF CHARGE, THERE IS NO WARRANTY FOR
THE PROGRAM, TO THE EXTENT PERMITIED BY

Downloaded from www.Manualslib.com manuals search engine

 APPLICABLE LAW. EXCEPT WHEN OTHERWISE You should have received a copy of the GNU General Public
STATED IN WRITING THE COPYRIGHT HOLDERS License along with this program ; if not, write to the Free
AND/OR OTHER PARTIES PROVIDE THE PROGRAM Software Foundation, lnc.,51 Franklin Street, Fifth Floor,
"ASIS" WITHOUT WARRANTY OF ANY KIND, Boston, MA 02110-1301, USA
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT Also add information on how to contact you by electronic and
NOT LIMITED TO, THE IMPLIED WARRANTIES OF paper mail. If the program is interactive, make it output a short
MERCHANTABILITY AND FITNESS FOR A PARTICULAR notice like this when it starts in an interactive mode :
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE PROGRAM IS WITH YOU. Gnomovision version 69,
SHOULD THE PROGRAMPROVE DEFECTIVE, YOU Copyright (C) year name of author
ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION. Gnomovision comes with ABSOLUTELY NO

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW WARRANTY ; for details type 'show w'. This is free software,
OR AGREED TO IN WRITING WILL ANY COPYRIGHT and you are welcome to redistribute it under certain conditions
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY ; type 'show c' for details.
AND/OR REDISTRIBUTE DAMAGES, INCLUDING ANY The hypothetical commands 'show w' and 'show c' should
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL show the appropriate parts of the General Public License. Of
DAMAGES ARISING OUT OF THE USE OR INABILITY TO course, the commands you use may be called something other
USE THE PROGRAM (INCLUDING BUT NOT LIMITED than 'show w' and 'show c' ; they could even be mouse-clicks
TO LOSS OF DATA OR DATA BEING RENDERED or menu items-- whatever suits your program.
INACCURATE OR LOSSES SUSTAINED BY YOU OR
You should also get your employer (if you work as a
THIRD PARTIES OR A FAILURE OF THE PROGRAM TO
programmer)or your school, if any, to sign a "copyright
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF
disclaimer" for the program,if necessary. Here is a sample;
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED
alter the names:
OF THE POSSIBILITY OF SUCH DAMAGES.
Yoyodyne, lnc.,hereby disclaims all copyright interest in the
END OF TERMS AND CONDITIONS program 'Gnomovision' (which makes passes at compilers)
How to Apply These Terms to Your New Programs written by James Hacker.
If you develop a new program, and you want it to be of the signature of TyCoon, 1 April1989 TyCoon, President of Vice
greatest possible use to the public, the best way to achieve this This General Public License does not permit incorporating
is to make it free software which everyone can redistribute and your program into proprietary programs. If your program is a
change under these terms. subroutine library, you may consider it more useful to permit
linking proprietary applications with the library. If this is what
To do so, attach the following notices to the program. It is
safest to attach them to the start of each source file to most you want to do, use the GNU Lesser General Public
effectively convey the exclusion of warranty ; and each file License instead of this License.
should have at least the "copyright" line and a pointer to where GNU GENERAL PUBLIC LICENSE
the full notice is found.
Version 3, 29 June 2007
one line to give the program's name and an idea of what it does.
Copyright© 2007 Free Software Foundation, Inc. <http://fsf.org/>
Copyright (C)yyyy name of author
Everyone is permitted to copy and distribute verbatim copies of
Tllis program is free software ; you can redistribute it and/or this license document, but changing it is not allowed.
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation ; either version 2 of Preamble
the License, or (at your option)any later version. The GNU General Public License is a free, copyleft
This program is distributed in the hope that it will be useful, but license for software and other kinds of works. The licenses
WITHOUT ANY WARRANTY; without even the implied warranty for most software and other practical works are designed
of MERCHANTABILITY or FITNESS FOR A PARTICULAR to take away' your freedom to share and change the works.
PURPOSE. See the GNU General Public License for more details.

Downloaded from www.Manualslib.com manuals search engine

 By contrast, the GNU General Public License is intended to those that do, we wish to avoid the special danger that patents
guarantee your freedom to share and change all versions of a applied to a free program could make it effectively proprietary.
program--to make sure it remains free software for all its users. To prevent this, the GPL assures that patents car. not be used
We, the Free Software Foundation, use the GNU General to render the program non-free.
Public License for most of our software; it applies also to any The precise terms and conditions for copying, distribution and
other work released this way by its authors. modification follow.
You can apply it to your programs, too.
TERMS AND CONDITIONS
When we speak of free software, we are referring to freedom,
not price. Our General Public Licenses are designed to make 0. Definitions.
sure that you have the freedom to distribute copies of free 'This License" refers to version 3 of the GNU General Public
software (and charge for them if you wish), that you receive License.
source code or can get it if you want it, that you can change
the software or use pieces of it in new free programs, and that "Copyright" also means copyright -like laws that apply to other
you know you can do these things. · kinds of works, such as semiconductor masks.

To protect your rights, we need to prevent others from "The Program" refers to any copyrightable work licensed under
denying you these rights or asking you to surrender the rights. this License. Each licensee is addressed as "you". "Licensees"
Therefore, you have certain responsibilities if you distribute and "recipients" may be individuals or organizations.
copies of the software, or if you modify it: responsibilities to To "modify" a work means to copy from or adapt all or part cf the
respect the freedom of others. work in a fashion requiring copyright permission, other than the
For example, if you distribute copies of such a program, making of an exact copy. The resulting work is called a "moc:Ufted
whether gratis or for a fee, you must pass on to the recipients version" of the earlier work or a work "based on" the earlier work.
the same freedoms that you received. You must make sure A "covered work" means either the unmodified Program or a
that they, too, receive or can get the source code. And you work based on the Program.
must show them these terms so they know their rights.
To "propagate" a work means to do anything with it that, without
Developers that use the GNU GPL protect your rights with two steps: permission, would make you directly or secondarily liable for
(1) assert copyright on the software, and (2) offer you this License infringement under applicable copyright law, except executing it
giving you legal permission to copy, distribute and/or modify it. on a computer or modifying a private copy. Propagation includes
For the developers' and authors' protection, the GPL clearly copying, distribution (with or without modification), making available
explains that there is no warranty for this free software. For to the public, and in some countries other activities as well.
both users' and authors' sake, the GPL requires that modified To "convey" a work means any kind of propagation that
versions be marked as changed, so that their problems will not enables other parties to make or receive copies. Mere
be attributed erroneously to authors of previous versions. interaction with a user through a computer network, with no
Some devices are designed to deny users access to install or transfer of a copy, is not conveying.
run modified versions of the software inside them, although the An interactive user interface displays "Appropriate Legal
manufacturer can do so. This is fundamentally incompatible with Notices" to the extent that it includes a convenient and
the aim of protecting users' freedom to change the software. prominently visible feature that (1) displays an appropriate
The systematic pattern of such abuse occurs in the area of copyright notice, and (2) tells the user that there is no warranty
products for individuals to use, which is precisely where it is for the work (except to the extent that warranties are provided),
most unacceptable. Therefore, we have designed this version that licensees may convey the work under this License, and
of the GPL to prohibit the practice for those products. If such how to view a copy of this License. If the interface presents a
problems arise substantially in other domains, we stand ready list of user commands or options, such as a menu, a prominent
to extend this provision to those domains in future versions of item in the list meets this criterion.
the GPL, as needed to protect the freedom of users.
1. Source Code.
Finally, every program is threatened constantly by software
The "source code" for a work means the preferred form of the
patents. States should not allow patents to restrict development
work for making modifications to it. "Object code" means any
and use of software on general-purpose computers, but in
non-source form of a work.

Downloaded from www.Manualslib.com manuals search engine

 A "Standard Interface" means an interface that either is an official provided that you comply with the terms of this License in
standard defined by a recognized standards body, or, in the case conveying all material for which you do not control copyright.
of interfaces specified for a particular programming language, one Those thus making or running the covered works for you must
that is widely used among developers working in that language. do so exclusively on your behalf, under your direction and
The "System Libraries" of an executable work include anything, control, on terms that prohibit them from making any copies of
other than the work as a whole, that (a) is included in the your copyrighted material outside their relationship with you.
normal form of packaging a Major Component, but which is not Conveying under any other circumstances is permitted solely
part of that Major Component, and (b) serves only to enable under the conditions stated below. Sublicensing is not allowed;
use of the work with that Major Component, or to implement a section 10 makes it unnecessary.
Standard Interface for which an implementation is available to
the public in source code form. A "Major Component", in this 3. Protecting Users' Legal Rights From Anti-Circumvention Law.
context, means a major essential component (kernel, window No covered work shall be deemed part of an effective
system, and so on) of the specific operating system (if any) on technological measure under any applicable law fulfilling
which the executable work runs, or a compiler used to produce obligations under article 11 of the WI PO copyright treaty
the work, or an object code interpreter used to run it. adopted on 20 December 1996, or similar laws prohibiting or
restricting circumvention of such measures.
The "Corresponding Source" for a work in object code form
means all the source code needed to generate, install, and When you convey a covered work, you waive any legal power
(for an executable work) run the object code and to modify the to forbid circumvention of technological measures to the extent
work, including scripts to control those activities. However, such circumvention is effected by exercising rights under this
it does not include the work's System Libraries, or general- License with respect to the covered work, and you disclaim any
purpose tools or generally available free programs which are intention to limit operation or modification of the work as a means
used unmodified in performing those activities but which are not of enforcing, against the work's users, your or third parties' legal
part of the work. For example, Corresponding Source includes rights to forbid circumvention of technological measures.
interface definition files associated with source files for the
4. Conveying Verbatim Copies.
work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to You may convey verbatim copies of the Program's source
require, such as by intimate data communication or control flow code as you receive it, in any medium, provided that you
between those subprograms and other parts of the work. conspicuously and appropriately publish on each copy an
appropriate copyright notice; keep intact all notices stating that
The Corresponding Source need not include anything that
this License and any non-permissive terms added in accord
users can regenerate automatically from other parts of the
with section 7 apply to the code; keep intact all notices of the
Corresponding Source.
absence of any warranty; and give all recipients a copy of this
The Corresponding Source for a work in source code form is License along with the Program.
that same work.
You may charge any price or no price for each copy that you
2. Basic Permissions. convey, and you may offer support or warranty protection for a fee.
All rights granted under this License are granted for the term 5. Conveying Modified Source Versions.
of copyright on the Program, and are irrevocable provided
You may convey a work based on the Program, or the
the stated conditions are met. This License explicitly affirms
modifications to produce it from the Program, in the form of
your unlimited permission to run the unmodified Program. The
source code under the terms of section 4, provided that you
output from running a covered work is covered by this License
also meet all of these conditions:
only if the output, given its content, constitutes a covered work.
This License acknowledges your rights of fair use or other a) The work must carry prominent notices stating that you
equivalent, as provided by copyright law. modified it, and giving a relevant date.
You may make, run and propagate covered works that you do b) The work must carry prominent notices stating that it is
not convey, without conditions so long as your license otherwise released under this License and any conditions added under
remains in force. You may convey covered works to others for section 7. This requirement modifies the requirement in
the sole purpose of having them make modifications exclusively section 4 to ~'keep intact all notices".
for you, or provide you with facilities for running those works,

Downloaded from www.Manualslib.com manuals search engine

 c) You must license the entire work, as a whole, under this d) Convey the object code by offering access from a designated
License to anyone who comes into possession of a copy. This place (gratis or for a charge), and offer equivalent access to
License will therefore apply, along with any applicable section the Corresponding Source in the same way through the same
7 additional terms, to the whole of the work, and all its parts, place at no further charge. You need not require recipients to
regardless of how they are packaged. This License gives no copy the Corresponding Source along with the object code.
permission to license the work in any other way, but it does not If the place to copy the object code is a network server, the
invalidate such permission if you have separately received it. Corresponding Source may be on a different server (operated
d) If the work has interactive user interfaces, each must display by you or a third party) that supports equivalent copying
Appropriate Legal Notices; however, if the Program has facilities, provided you maintain clear directions next to the
interactive interfaces that do not display Appropriate Legal object code saying where to find the Corresponding Source.
Notices, your work need not make them do so. Regardless of what server hosts the Corresponding Source,
you remain obligated to ensure that it is available for as long
A compilation of a covered work with other separate and
independent works, which are not by their nature extensions as needed to satisfy these requirements.
of the covered work, and which are not combined with it such e) Convey the object code using peer-to-peer transmission,
as to form a larger program, in or on a volume of a storage or provided you inform other peers where the object code and
distribution medium, is called an "aggregate" if the compilation Corresponding Source of the work are being offered to the
and its resulting copyright are not used to limit the access or legal general public at no charge under subsection 6d.
rights of the compilation's users beyond what the individual works A separable portion of the object code, whose source code is
permit. Inclusion of a covered work in an aggregate does not excluded from the Corresponding Source as a System Library,
cause this License to apply to the other parts of the aggregate. need not be included in conveying the object code work.
6. Conveying Non-Source Forms. A "User Product" is either (1) a "consumer product", which
You may convey a covered work in object code form under the means any tangible personal property which is normally
terms of sections 4 and 5, provided that you also convey the used for personal, family, or household purposes, or (2)
machine-readable Corresponding Source under the terms of anything designed or sold for incorporation into a dwelling. In
this License, in one of these ways: determining whether a product is a consumer product, doubtful
cases shall be resolved in favor of coverage. For a particular
a) Convey the object code in, or embodied in, a physical product received by a particular user, "normally used" refers to
product (including a physical distribution medium), a typical or common use of that class of product, regardless
accompanied by the Corresponding Source fixed on a of the status of the particular user or of the way in which the
durable physical medium customarily used for software particular user actually uses, or expects or is expected to use,
interchange. the product. A product is a consumer product regardless of
b) Convey the object code in, or embodied in, a physical whether the product has substantial commercial, industrial
or non-consumer uses, unless such uses represent the only
product (including a physical distribution medium),
accompanied by a written offer, valid for at least three significant mode of use of the product.
years and valid for as long as you offer spare parts or "Installation Information" for a User Product means any
customer support for that product model, to give anyone methods, procedures, authorization keys, or other information
who possesses the object code either (1) a copy of the required to install and execute modified versions of a covered
Corresponding Source for all the software in the product that work in that User Product from a modified version of its
is covered by this License, on a durable physical medium Corresponding Source. The information must suffice to ensure
customarily used for software interchange, for a price no that the continued functioning of the modified object code
more than your reasonable cost of physically performing is in no case prevented or interfered with solely because
this conveying of source, or (2) access to copy the modification has been made.
Corresponding Source from a network server at no charge.
If you convey an object code work under this section in,
c) Convey individual copies of the object code with a copy of or with, or specifically for use in, a User Product, and the
the written offer to provide the corresponding Source. This conveying occurs as part of a transaction in which the right of
alternative is allowed only occasionally and noncommercially, possession and use of the User Product is transferred to the
and only if you received the object code with such an offer, recipient in perpetuity or for a fixed term (regardless of how
in accord with subsection 6b. the transaction is characterized), the Corresponding Source

Downloaded from www.Manualslib.com manuals search engine

 conveyed under this section must be accompanied by the d) Limiting the use for publicity purposes of names of licensors
Installation Information. But this requirement does not apply or authors of the material; or
if neither you nor any third party retains the ability to install
e) Declining to grant rights under trademark law for use of
modified object code on the User Product (for example, the
some trade names, trademarks, or service marks; or
work has been installed in ROM).
~ Requiring indemnification of licensors and authors of that
The requirement to provide Installation Information does not
material by anyone who conveys the material (or modified
include a requirement to continue to provide support service,
versions of it) with contractual assumptions of liability to the
warranty, or updates for a work that has been modified or
recipient, for any liability that these contractual assumptions
installed by the recipient, or for the User Product in which it has
directly impose on those licensors and authors.
been modified or installed. Access to a network may be denied
when the modification itself materially and adversely affects the All other non-permissive additional terms are considered "further
operation of the network or violates the rules and protocols for restrictions" within the meaning of section 10. If the Program
communication across the network. as you received it, or any part of it, contains a notice stating
that it is governed by this License along with a term that is
Corresponding Source conveyed, and Installation Information a further restriction, you may remove that term. If a license
provided, in accord with this section must be in a format that document contains a further restriction but permits relicensing
is publicly documented (and with an implementation available or conveying under this License, you may add to a covered
to the public in source code form), and must require no special work material governed by the terms of that license document,
password or key for unpacking, reading or copying. provided that the further restriction does not survive such
7. Additional Terms. relicensing or conveying.
"Additional permissions" are terms that supplement the terms If you add terms to a covered work in accord with this section,
of this License by making exceptions from one or more of its you must place, in the relevant source files, a statement of the
conditions. Additional permissions that are applicable to the additional terms that apply to those files, or a notice indicating
entire Program shall be treated as though they were included in where to find the applicable terms.
this License, to the extent that they are valid under applicable Additional terms, permissive or non-permissive, may be
law. If additional permissions apply only to part of the Program, stated in the form of a separately written license, or stated as
that part may be used separately under those permissions, but exceptions; the above requirements apply either way.
the entire Program remains governed by this License without
regard to the additional permissions. 8. Termination.

When you convey a copy of a covered work, you may at your You may not propagate or modify a covered work except as
option remove any additional permissions from that copy, or expressly provided under this License. Any attempt otherwise
from any part of it. (Additional permissions may be written to to propagate or modify it is void, and will automatically
require their own removal in certain cases when you modify terminate your rights under this License (including any patent
the work.) You may place additional permissions on material, licenses granted under the third paragraph of section 11 ).
added by you to a covered work, for which you have or can However, if you cease all violation of this License, then your
give appropriate copyright permission. license from a particular copyright holder is reinstated (a)
Notwithstanding any other provision of this License, for material you provisionally, unless and until the copyright holder explicitly
add to a covered work, you may (if authorized by ~he copyright holders and finally terminates your license, and (b) permanently, if the
of that material) supplement the terms of this License with terms: copyright holder fails to notify you of the violation by some
reasonable means prior to 60 days after the cessation.
a) Disclaiming warranty or limiting liability differently from the
Moreover, your license from a particular copyright holder is
terms of sections 15 and 16 of this License; or
reinstated permanently if the copyright holder notifies you of the
b) Requiring preservation of specified reasonable legal notices violation by some reasonable means, this is the first time you
or author attributions in that material or in the Approp!·iate have received notice of violation of this License (for any work)
Legal Notices displayed by works containing it; or from that copyright holder, and you cure the violation prior to
30 days after your receipt of the notice.
c) Prohibiting misrepresentation of the origin of that material, or
requiring that modified versions of such material be marked Terminat[on of your rights under this section does not terminate
in reasonable ways as different from the original version; or the licenses of parties who have received copies or rights from

Downloaded from www.Manualslib.com manuals search engine

 you under this License. If your rights have been terminated and infringed only as a consequence of further modification of the
not permanently reinstated, you do not qualify to receive new contributor version. For purposes of this definition, "control"
licenses for the same material under section 10. includes the right to grant patent sublicenses in a manner
9. Acceptance Not Required for Having Copies. consistent with the requirements of this License.

You are not required to accept this License in order to receive Each contributor grants you a non-exclusive, worldwide,
or run a copy of the Program. Ancillary propagation of a royalty-free patent license under the contributor's essential
covered work occurring solely as a consequence of using patent claims, to make, use, sell, offer for sale, import and
peer-to-peer transmission to receive a copy likewise does not otherwise run, modify and propagate the contents of its
require acceptance. However, nothing other than this License contributor version.
grants you permission to propagate or modify any covered In the following three paragraphs, a "patent license" is any express
work. These actions infringe copyright if you do not accept agreement or commitment, however denominated, not to enforce
this License. Therefore, by modifying or propagating a covered a patent (such as an express permission to practice a patent or
work, you indicate your acceptance of this License to do so. covenant not to sue for patent infringement). To "grant" such a
10. Automatic Licensing of Downstream Recipients. patent license to a party means to make such an agreement or
commitment not to enforce a patent against the party.
Each time you convey a covered work, the recipient
automatically receives a license from the original licensors, to If you convey a covered work, knowingly relying on a patent
run, modify and propagate that work, subject to this License. license, and the Corresponding Source of the work is not
You are not responsible for enforcing compliance by third available for anyone to copy, free of charge and under the terms
parties with this License. of this License, through a publicly available network server or
other readily accessible means, then you must either (1) cause
An "entity transaction" is a transaction transferring control of an the Corresponding Source to be so available, or (2) arrange
organization, or substantially all assets of one, or subdividing to deprive yourself of the benefit of the patent license for this
an organization, or merging organizations. If propagation of a particular work, or (3) arrange, in a manner consistent with the
covered work results from an entity transaction, each party to requirements of this License, to extend the patent license to
that transaction who receives a copy of the work also receives downstream recipients. "Knowingly relying" means you have
whatever licenses to the work the party's predecessor in actual knowledge that, but for the patent license, your conveying
interest had or could give under the previous paragraph, plus the covered work in a country, or your recipient 's use of the
a right to possession of the Corresponding Source of the work covered work in a country, would infringe one or more identifiable
from the predecessor in interest, if the predecessor has it or patents in that country that you have reason to believe are valid.
can get it with reasonable efforts.
If, pursuant to or in connection with a single transaction
You may not impose any further restrictions on the exercise of the or arrangement, you convey, or propagate by procuring
rights granted or affirmed under this Ucense. For example, you conveyance of, a covered work, and grant a patent license
may not impose a license fee, royalty, or other charge for exercise to some of the parties receiving the covered work authorizing
of rights granted under this License, and you may not initiate them to use, propagate, modify or convey a specific copy
litigation (including a cross-claim or counterclaim in a lawsuit) of the covered work, then the patent license you grant is
alleging that any patent claim is infringed by making, using, selling, automatically extended to all recipients of the covered work
offering for sale, or importing the Program or any portion of it. and works based on it.
11. Patents. A patent license is "discriminatory" if it does not include within
A "contributor" is a copyright holder who authorizes use under the scope of its coverage, prohibits the exercise of, or is
this License of the Program or a work on which the Program conditioned on the non-exercise of one or more of the rights
is based. The work thus licensed is called the contributor's that are specifically granted under this License. You may not
"contributor version". convey a covered work if you are a party to an arrangement
with a third party that is in the business of distributing software,
A contributor's "essential patent claims" are all patent claims under which you make payment to the third party based on the
owned or controlled by the contributor, whether already extent of your activity of conveying the work, and under which
acquired or hereafter acquired, that would be infringed by some the third party grants, to any of the parties who would receive
manner, permitted by this License, of making, using, or selling the covered work from you, a discriminatory patent license
its contributor version, but do not include claims that would be

Downloaded from www.Manualslib.com manuals search engine

 (a) in connection with copies of the covered work conveyed by Later license versions may give you additional or different
you (or copies made from those copies) , or permissions. However, no additional obligations are imposed
(b) primarily for and in connection with specific products or on any author or copyright holder as a result of your choosing
compilations that contain the covered work, unless you to follow a later version.
entered into that arrangement, or that patent license was 15. Disclaimer of Warranty.
granted, prior to 28 March 2007.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
Nothing in this License shall be construed as excluding or limiting PERMITIED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE
any implied license or other defenses to infringement that may STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
otherwise be available to you under applicable patent law. OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
12. No Surrender of Others' Freedom. WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
If conditions are imposed on you (whether by court order,
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
agreement or otherwise) that contradict the conditions of this
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
License, they do not excuse you from the conditions of this
PERFORMANCE OF THE PROGRAM IS WITH YOU . SHOULD
License. If you cannot convey a covered work so as to satisfy
THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST
simultaneously your obligations under this License and any
OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
other pertinent obligations, then as a consequence you may
not convey it at all. For example, if you agree to terms that 16. Limitation of Liability.
obligate you to collect a royalty for further conveying from those IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR
to whom you convey the Program, the only way you could AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER,
satisfy both those terms and this License would be to refrain OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
entirely from conveying the Program. THE PROGRAM AS PERMITIED ABOVE, BE LIABLE TO
13. Use with the GNU Affero General Public License. YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
Notwithstanding any other provision of this License, you have permission
OUT OF THE USE OR INABILITY TO USE THE PROGRAM
to link or combine any covered work with a work licensed under version
(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA
3 of the GNU Affero General Public License into a single combined work,
BEING RENDERED INACCURATE OR LOSSES SUSTAINED
and to convey the resulting work. The terms of this License will continue to
BY YOU OR THIRD PARTIES OR A FAILURE OF THE
apply to the part which is the covered work, but the special requirements
PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
of the GNU Affero General Public License, section 13, concerning
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
interaction through a network will apply to the combination as such.
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
14. Revised Versions of this License.
17. Interpretation of Sections 15 and 16.
The Free Software Foundation may publish revised and/ or new
If the disclaimer of warranty and limitation of liability provided
versions of the GNU General Public License from time to time.
above cannot be given local legal effect according to their
Such new versions will be similar in spirit to the present version,
terms, reviewing courts shall apply local law that most closely
but may differ in detail to address new problems or concerns.
approximates an absolute waiver of all civil liability in connection
Each version is given a distinguishing version number. If the with the Program, unless a warranty or assumption of liability
Program specifies that a certain numbered version of the GNU accompanies a copy of the Program in return for a fee.
General Public License "or any later version" applies to it, you
have the option of following the terms and conditions either of that END OF TERMS AND CONDITIONS
numbered version or of any later version published by the Free GNU LESSER GENERAL PUBLIC LICENSE
Software Foundation. If the Program does not specify a version
number of the GNU General Public License, you may choose any Version 2.1, February 1999
version ever published by the Free Software Foundation. Copyright (C) 1991 , 1999 Free Software Foundation, Inc. 51
If the Program specifies that a proxy can decide which future Franklin Street, Fifth Floor, Boston, MA 02110-1301
versions of the GNU General Public License can be used, that USA Everyone is permitted to copy and distribute verbatim
proxy's public statement of acceptance of a version permanently copies of this license document, but changing it is not allowed.
authorizes you to choose that version for the Program.

Downloaded from www.Manualslib.com manuals search engine

 [This is the first released version of the Lesser GPL. It also cannot effectively restrict the users of a free program by obtaining
counts as the successor of the GNU Library Public License, a restrictive license from a patent holder. Therefore, we insist that
version 2, hence the version number 2.1 .] any patent license obtained for a version of the library must be
Preamble consistent with the full freedom of use specified in this license.

The licenses for most software are designed to take away your Most GNU software, including some libraries, is covered by the
freedom to share and change it. By contrast, the GNU General ordinary GNU General Public License. This license, the GNU
Public Licenses are intended to guarantee your freedom to Lesser General Public License, applies to certain designated
share and change free software to make sure the software is libraries, and is quite different from the ordinary General Public
free for all its users. License. We use this license for certain libraries in order to
permit linking those libraries into non-free programs.
This license, the Lesser General Public License, applies
to some specially designated software packages-typically When a program is linked with a library, whether statically or
libraries-of the Free Software Foundation and other authors using a shared library, the combination of the two is legally
who decide to use it. You can use it too, but we suggest you speaking a combined work, a derivative of the original library.
first think carefully about whether this license or the ordinary The ordinary General Public License therefore permits such
General Public License is the better strategy to use in any linking only if the entire combination fits its criteria of freedom.
particular case, based on the explanations below. The Lesser General Public License permits more lax criteria for
linking other code with the library.
When we speak of free software, we are referring to freedom
of use, not price. Our General Public Licenses are designed to We call this license the "Lesser" General Public License because it
make sure that you have the freedom to distribute copies of does Less to protect the user's freedom than the ordinary General
free software (and charge for this service if you wish); that you Public License. It also provides other free software developers
receive source code or can get it if you want it; that you can Less of an advantage over competing non-free programs. These
change the software and use pieces of it in new free programs; disadvantages are the reason we use the ordinary General Public
and that you are informed that you can do these things. License for many libraries. However, the Lesser license provides
advantages in certain special circumstances.
To protect your rights, we need to make restrictions that forbid
distributors to deny you these rights or to ask you to surrender For example, on rare occasions, there may be a special need
these rights. These restrictions translate to certain responsibilities to encourage the widest possible use of a certain library, so
for you if you distribute copies of the library or if you modify it. that it becomes a de-facto standard. To achieve this, non-free
programs must be allowed to use the library. A more frequent
For example, if you distribute copies of the library, whether case is that a free library does the same job as widely used
gratis or for a fee, you must give the recipients all the ri.ghts that non-free libraries. In this case, there is little to gain by limiting
we gave you. You must make sure that they, too, rece1ve or the free library to free software only, so we use the Lesser
can get the source code. If you link other code with the library, General Public License.
you must provide complete object files to the recipients, so that
they can relink them with the library after making changes to In other cases, permission to use a particular library in non-free
the library and recompiling it. And you must show them these programs enables a greater number of people to use a large
terms so they know their rights. body of free software. For example, permission to use the GNU
C Library in non-free programs enables many more people to
We protect your rights with a two-step method: (1) we copyright use the whole GNU operating system, as well as its variant, the
the library, and (2) we offer you this license, which gives you GNU/ Linux operating system.
legal permission to copy, distribute and/or modify the library.
Although the Lesser General Public License is Less protective of
To protect each distributor, we want to make it very clear the users' freedom, it does ensure that the user of a program that
that there is no warranty for the free library. Also, if the library is linked with the Library has the freedom and the wherewithal to
is modified by someone else and passed on, the recipients run that program using a modified version of the Library.
should know that what they have is not the original version,
so that the original author's reputation will not be affected by The precise terms and conditions for copying, distribution and
problems that might be introduced by others. modification follow. Pay close attention to the difference between
a "work based on the library" and a "work that uses the library".
Finally, software patents pose a constant threat to the existence The former contains code derived from the library, whereas the
of any free program. We wish to make sure that a company latter must be combined with the library in order to run.

Downloaded from www.Manualslib.com manuals search engine

 TERMS AND CONDITIONS FOR COPYING, a) The modified work must itself be a software library. b) You
DISTRIBUTION AND MODIFICATION must cause the files modified to carry prominent notices stating
that you changed the files and the date of any change. c) You
0. This License Agreement applies to any software library must cause the whole of the work to be licensed at no charge
or other program which contains a notice placed by the to all third parties under the terms of this License. d) If a facility
copyright holder or other authorized party saying it may in the modified Library refers to a function or a table of data to
be distributed under the terms of this Lesser General be supplied by an application program that uses the facility,
Public License (also called "this License"). Each licensee is other than as an argument passed when the facility is invoked,
addressed as "you". then you must make a good faith effort to ensure that, in the
A "library" means a collection of software functions and/ or event an application does not supply such function or table, the
data prepared so as to be conveniently linked with application facility still operates, and performs whatever part of its purpose
programs (which use some of those functions and data) to remains meaningful. (For example, a function in a library to
form executables. compute square roots has a purpose that is entirely well-defined
independent of the application. Therefore, Subsection 2d
The "Library", below, refers to any such software library or work
requires that any application-supplied function or table used by
which has been distributed under these terms. A "work based
this function must be optional: if the application does not supply
on the Library" means either the Library or any derivative work
it, the square root function must still compute square roots.)
under copyright law: that is to say, a work containing the Library
These requirements apply to the modified work as a whole. If
or a portion of it, either verbatim or with modifications and/or
identifiable sections of that work are not derived from the Library,
translated straightforwardly into another language. (Hereinafter,
and can be reasonably considered independent and separate
translation is included without limitation in the term "modification".)
works in themselves, then this License, and its terms, do not
"Source code" for a work means the preferred form of the work apply to those sections when you distribute them as separate
for making modifications to it. For a library, complete source works. But when you distribute the same sections as part of
code means all the source code for all modules it contains, plus a whole which is a work based on the Library, the distribution
any associated interface definition files, plus the scripts used to of the whole must be on the terms of this License, whose
control compilation and installation of the library. permissions for other licensees extend to the entire whole, and
thus to each and every part regardless of who wrote it.
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of Thus, it is not the intent of this section to claim rights or contest
running a program using the Library is not restricted, and output your rights to work written entirely by you; rather, the intent is
from such a program is covered only if its contents constitute a to exercise the right to control the distribution of derivative or
work based on the Library (independent of the use of the Library collective works based on the Library.
in a tool for writing it). Whether that is true depends on what the
In addition, mere aggregation of another work not based on the
Library does and what the program that uses the Library does.
Library with the Library (or with a work based on the Library)
1. You may copy and distribute verbatim copies of the Library's on a volume of a storage or distribution medium does not bring
complete source code as you receive it, in any medium, the other work under the scope of this License.
provided that you conspicuously and appropriately publish
3. You may opt to apply the terms of the ordinary GNU General
on each copy an appropriate copyright notice and disclaimer
Public License instead of this License to a given copy of the
of warranty; keep intact all the notices that refer to this
Library. To do this, you must alter all the notices that refer to
License and to the absence of any warranty; and distribute a
this License, so that they refer to the ordinary GNU General
copy of this License along with the Library.
Public License, version 2, instead of to this License. (If a
You may charge a fee for the physical act of transferring a newer version than version 2 of the ordinary GNU General
copy, and you may at your option offer warranty protection in Public License has appeared, then you can specify that
exchange for a fee. version instead if you wish .) Do not make any other change
in these notices.
2. You may modify your copy or copies of the Library or any
portion of it, thus forming a work based on the Library, and Once this change is made in a given copy, it is irreversible for
copy and distribute such modifications or work under the that copy, so the ordinary GNU General Public License applies
terms of Section 1 above, provided that you also meet all of to all subsequent copies and derivative works made from that
these conditions: copy.

Downloaded from www.Manualslib.com manuals search engine

 This option is useful when you wish to copy part of the code of provided that the terms permit modification of the work
the Library into a program that is not a library. for the customer's own use and reverse engineering for
debugging such modifications.
4. You may copy and distribute the Library (or a portion or
You must give prominent notice with each copy of the work
derivative of it, under Section 2) in object code or executable
that the Library is used in it and that the Library and its use
form under the terms of Sections 1 and 2 above provided
are covered by this License. You must supply a copy of
t hat you accompany it with the complete corresponding
this License. If the work during execution displays copyright
machine-readable source code, which must be distributed
notices, you must include the copyright notice for the Library
under the terms of Sections 1 and 2 above on a medium
among them, as well as a reference directing the user to the
customarily used for software interchange.
copy of this License. Also, you must do one of these things:
If distribution of object code is made by offering access to copy
from a designated place, then offering equivalent access to copy a) Accompany the work with the complete corresponding
the source code from the same place satisfies the requirement machine-readable source code for the Library including
to distribute the source code, even though third parties are not whatever changes were used in the work (which must be
compelled to copy the source along with the object code. distributed under Sections 1 and 2 above); and, if the work
is an executable linked with the Library, with the complete
5. A program that contains no derivative of any portion of the machine readable "work that uses the Library", as object
Library, but is designed to work with the Library by being code and/or source code, so that the user can modify the
compiled or linked with it, is called a "work that uses the Library and then relink to produce a modified executable
Library". Such a work, in isolation, is not a derivative work containing the modified Library. (It is understood that
of the Library, and therefore falls outside the scope of this the user who changes the contents of definitions files in
License. the Library will not necessarily be able to recompile the
However, linking a "work that uses the Library" with the Library application to use the modified definitions.)
creates an executable that is a derivative of the Library (because
b) Use a suitable shared library mechanism for linking with the
it contains portions of the Library), rather than a "work that uses
the library". Library. A suitable mechanism is one that
The executable is therefore covered by this License. Section 6 (1) uses at run time a copy of the library already present
states terms for distribution of such executables. on the user's computer system, rather than copying library
functions into the executable, and (2) will operate properly with
When a "work that uses the Library" uses material from a header a modified version of the library, if the user installs one, as long
file that is part of the Library, the object code for the work may as the modified version is interface-compatible with the version
be a derivative work of the Library even though the source code that the work was made with.
is not. Whether this is true is especially significant if the work can
be linked without the Library, or if the work is itself a library. The c) Accompany the work with a written offer, valid for at least
threshold for this to be true is not precisely defined by law. three years, to give the same user the materials specified in
If such an object file uses only numerical parameters, data Subsection 6a, above, for a charge no more than the cost of
structure layouts and accessors, and small macros and small performing this distribution.
inline functions (ten lines or less in length), then the use of the d) If distribution of the work is made by offering access to copy
object file is unrestricted, regardless of whether it is legally a from a designated place, offer equivalent access to copy the
derivative work. (Executables containing this object code plus above specified materials from the same place.
portions of the Library will still fall under Section 6.)
e) Verify that the user has already received a copy of these
Otherwise, if the work is a derivative of the Library, you may materials or that you have already sent this user a copy.
distribute the object code for the work under the terms of Section For an executable, the required form of the "work that uses
6. Any executables containing that work also fall under Section 6, the Library" must include any data and utility programs needed
whether or not they are linked directly with the Library itself. for reproducing the executable from it. However, as a special
exception, the materials to be distributed need not include
6. As an exception to the Sections above, you may also
anything that is normally distributed (in either source or binary
combine or link a "work that uses the Library" with the
form) with the major components (compiler, kernel, and so on)
Library to produce a work containing portions of the
of the operating system on which the executable runs, unless
Library, and distribute that work under terms of your choice,
that component itself accompanies the executable.

Downloaded from www.Manualslib.com manuals search engine

 It may happen that this requirement contradicts the license court order, agreement or otherwise) that contradict the
restrictions of other proprietary libraries that do not normally conditions of this License, they do not excuse you from the
accompany the operating system. Such a contradiction means conditions of this License. If you cannot distribute so as to
you cannot use both them and the Library together in an satisfy simultaneously your obligations under this License
executable that you distribute. and any other pertinent obligations, then as a consequence
you may not distribute the Library at all. For example, if a
7. You may place library facilities that are a work based on the patent license would not permit royalty free redistribution
Library side-by-side in a single library together with other library of the Library by all those who receive copies directly or
facilities not covered by this License, and distribute such a indirectly through you, then the only way you could satisfy
combined library, provided that the separate distribution of the both it and this License would be to refrain entirely from
work based on the Library and of the other library facilities is distribution of the Library.
otherwise permitted, and provided that you do these two things:
If any portion of this section is held invalid or unenforceable
a) Accompany the combined library with a copy of the same under any particular circumstance, the balance of the section
work based on the Library, uncombined with any other is intended to apply, and the section as a whole is intended to
library facilities. This must be distributed under the terms
of the Sections above. .
apply in other circumstances.
It is not the purpose of this section to induce you to infringe any
b) Give prominent notice with the combined library of the patents or other property right claims or to contest validity of
fact that part of it is a work based on the Library, and any such claims; this section has the sole purpose of protecting
explaining where to find the accompanying uncombined the integrity of the free software distribution system which is
form of the same work. implemented by public license practices. Many people have
8. You may not copy, modify, sublicense, link with, or distribute made generous contributions to the wide range of software
the Library except as expressly provided under this License. distributed through that system in reliance on consistent
Any attempt otherwise to copy, modify, sublicense, link application of that system; it is up to the author/donor to
with, or distribute the Library is void, and will automatically decide if he or she is willing to distribute software through any
terminate your rights under this License. However, parties other system and a licensee cannot impose that choice.
who have received copies, or rights, from you under this This section is intended to make thoroughly clear what is
License will not have their licenses terminated so long as believed to be a consequence of the rest of this License.
such parties remain in full compliance.
12. If the distribution and/or use of the Library is restricted
9. You are not required to accept this License, since you have in certain countries either by patents or by copyrighted
not signed it. However, nothing else grants you permission interfaces, the original copyright holder who places the
to modify or distribute the Library or its derivative works. Library under this License may add an explicit geographical
These actions are prohibited by law if you do not accept distribution limitation excluding those countries, so that
this License. Therefore, by modifying or distributing the distribution is permitted only in or among countries not
Library (or any work based on the Library), you indicate your thus excluded. In such case, this License incorporates the
acceptance of this License to do so, and all its terms and limitation as if written in the body of this License.
conditions for copying, distributing or modifying the Library
or works based on it. 13. The Free Software Foundation may publish revised and/or
new versions of the Lesser General Public License from
10. Each time you redistribute the Library (or any work based time to time. Such new versions will be similar in spirit to
on the Library), the recipient automatically receives a the present version, but may differ in detail to address new
license from the original licensor to copy, distribute, link problems or concerns.
with or modify the Library subject to these terms and
Each version is given a distinguishing version number. If the
conditions. You may not impose any further restrictions on
Library specifies a version number of this License which
the recipients'
applies to it and "any later version", you have the option of
exercise of the rights granted herein. You are not responsible
following the terms and conditions either of that version or of
for enforcing compliance by third parties with this License.
any later version published by the Free Software Foundation.
11. If, as a consequence of a court judgment or allegation of If the Library does not specify a license version number, you
patent infringement or for any other reason (not limited to may choose any version ever published by the Free Software
patent issues), conditions are imposed on you (whether by Foundation.

Downloaded from www.Manualslib.com manuals search engine

 14. If you wish to incorporate parts of the Library into other free should have at least the "copyright" line and a pointer to where
programs whose distribution conditions are incompatible the full notice is found. one line to give the library's name and
with these, write to the author to ask for permission. an idea of what it does.
For software which is copyrighted by the Free Software
Copyright (C) year name of author
Foundation, write to the Free Software Foundation; we
sometimes make exceptions for this. Our decision will be This library is free software; you can redistribute it and/ or
guided by the two goals of preserving the free status of modify it under the terms of the GNU Lesser General Public
all derivatives of our free software and of promoting the License as published by the Free Software Foundation; either
sharing and reuse of software generally. version 2.1 of the License, or (at your option) any later version .
NO WARRANTY This library is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
THERE IS NO WARRANTY FOR THE LIBRARY, TO THE See the GNU Lesser General Public License for more details.
EXTENT PERMITIED BY APPLICABLE LAW. EXCEPT
You should have received a copy of the GNU Lesser General
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
Public License along with this library; if not, write to the Free
HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY
"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
Boston, MA 02110-1301 USA Also add information on how to
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND contact you by electronic and paper mail.
FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK You should also get your employer (if you work as a programmer)
AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY or your school, if any, to sign a "copyright disclaimer" for the
IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, library, if necessary. Here is a sample; alter the names:
YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
Yoyodyne, Inc., hereby disclaims all copyright interest in the
REPAIR OR CORRECTION.
library 'Frob' (a library for tweaking knobs) written by James
16.1N NO EVENT UNLESS REQUIRED BY APPLICABLE LAW Random Hacker.
OR AGREED TO IN WRITING WILL ANY COPYRIGHT
signature ofTy Coon, 1 April1990 TyCoon, President of Vice.
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
AND/OR REDISTRIBUTE THE LIBRARY AS PERMITIED OpenSSL LICENSE
ABOVE, BE LIABLE TO YOU FOR DAMAGES,
Copyright (c) 1998-2006 The OpenSSL Project. All rights
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
reserved. Redistribution and use in source and binary forms,
CONSEQUENTIAL DAMAGES ARISING OUT OF THE
with or without modification, are permitted provided that the
USE OR INABILITY TO USE THE LIBRARY (INCLUDING
following conditions are met:
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY 1. Redistributions of source code must retain the above copyright
YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY notice, this list of conditions and the following disclaimer.
TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED 2. Redistributions in binary form must reproduce the above
OF THE POSSIBILITY OF SUCH DAMAGES. copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
END OF TERMS AND CONDITIONS provided with the distribution.
How to Apply These Terms to Your New Libraries 3. All advertising materials mentioning features or use of this
If you develop a new library, and you want it to be of the greatest software must display the following acknowledgment: "This
possible use to the public, we recommend making it free product includes software developed by the OpenSSL Project
software that everyone can redistribute and change. You can do for use in the OpenSSL Toolkit. (http://w-.vw.openssl.org/)"
so by permitting redistribution under these terms (or, alternatively, 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must
under the terms of the ordinary General Public License). not be used to endorse or promote products derived from
To apply these terms, attach the following notices to the library. this software without prior written permission. For written
It is safest to attach them to the start of each source file to permission, please contact [email protected].
most effectively convey the exclusion of warranty; and each file

Downloaded from www.Manualslib.com manuals search engine

 5. Products derived from this software may not be called 2. Redistributions in binary form must reproduce the above
"OpenSSL" nor may "OpenSSL" appear in their names copyright notice, this list of conditions and the following
without prior written permission of the OpenSSL Project. disclaimer in the documentation and/or other materials
6. Redistributions of any form whatsoever must retain the
provided with the distribution.
following acknowledgment: 'This product includes software 3. All advertising materials mentioning features or use of this
developed by the OpenSSL Project for use in the OpenSSL software must display the following acknowledgement: "This
Toolkit (http://W'WV'.' .openssl.org/)" product includes cryptographic software written by Eric
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT Young (eay@ cryptsoft.com)" The word 'cryptographic' can
"AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, be left out if the rouines from the library being used are not
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED cryptographic related :-).
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 4. If you include any Windows specific code (or a derivative
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT thereoD from the apps directory (application code) you
SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE must include an acknowledgement: "This product includes
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, software written by Tim Hudson (tjh@ cryptsoft.com)"
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
THIS SOFTVVARE IS PROVIDED BY ERIC YOUNG "AS IS
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY
OTHERWISE) ARISING I~J ANY WAY OUT OF THE USE OF
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
OR CONSEQUENTIAL DAMAGES (INCLUDING. BUT NOT
SUCH DAMAGE. This product includes cryptographic software
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
written by Eric Young ([email protected]). This product
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
includes software written by Tim Hudson([email protected]).
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
Original SSLeay License ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft. com) All STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WJl.Y OUT OF THE USE OF
rights reserved. This package is an SSL implementation wr:tten
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
by Eric Young (eay@cryptsoft. com). The implementation was
SUCH DAMAGE.
written so as to conform with Netscapes SSL. This library is
free for commercial and non-commercial use as long as the The licence and distribution terms for any publically available
following conditions are aheared to. The following conditions version or derivative of this code cannot be changed. i.e.
apply to all code found in this distribution, be it the RC4, this code cannot simply be copied and put under another
RSA, !hash, DES, etc., code; not just the SSL code. The SSL distribution licence [including the GNU Public Licence.]
documentation included with this distribution is covered by the
same copyright terms except that the holder is Tim Hudson
([email protected]).
Copyright remains Eric Young's, and as such any Copyright
notices in the code are not to be removed. If this package is
used in a product, Eric Young should be given attribution as the
author of the parts of the library used. This can be in the form
of a textual message at program startup or in documentation
(online or textual) provided with the package. Redistribution and
use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
PT01-001374A
1. Redistributions of source code must retain the copyright
notice, this list of conditions and the following disclaimer.
11111111111111111111111111111 ~1~111111 ~I

Downloaded from www.Manualslib.com manuals search engine

 SAMSUNG TECHWIN

Downloaded from www.Manualslib.com manuals search engine

'v~«. tit.,~,~<~"':~,"~< ~x~,, <~~ · ""{">,"'_,. ...-"'~~« '<' Y ~~~ ..., ' , ~,.,.,",""'/!f., ,y,"',"'' ,~.·-,~ i~N"""> ' :> ., '- .. , "~ ~~ .,{.81~;-:'•.._,~ , l'i';:;,_lt, ': ' f"", . .~~ >~y:, > .. };.'~> J! \<!:, .. <-"'~... ';

Warranty Certificate English

This Samsung Techwin product guaranteed for a period of one year When service is required, the warranty is validated by the submission of afully
as noted below from the date of purchase against defects in completed warranty card which was marked with Model Name, Serial No, Date
workmanship and materials. It shall be limited to the repair and/ or of Purchase & Price, Purchaser's Name & Address, and Place of purchase &
Address. Samsung Techwin does not warrant the repair of any product where
adjustment. the serial number has been altered or removed.
The service will be performed by one of the Samsung Techwin service agents
listed on this card.
This warranty becomes void if there is any malfunction, defect or failure caused
1 Year 1 Year by or resulting from the evidence of impact, mishandling, tampering, use contrary
to the applicable instruction manual, incorrect power line voltage, fire, flood or
other Acts of God, shipping damage or damage resulting from repairs performed
Samsung Techwin International Service Agents by unauthorized personnel. Routine cleaning, normal cosmetic and mechanical
wear and tear are not covered under the terms of this warranty.
When returning the product for warranty service, please pack it carefully, insure
the product and enclose your warranty card, original receipt or copy, brief
America Samsung Techwin America explanation of the problem.
USA +1-877-349-3149
www.samsun sv.com This warranty card does not cover the postal cost, insurance and any other
+31-77-326-1580 incidental charges.
Europe UK Samsung Techwin Europe 00800 8010 8022
(Toll Free)

..,. For Asia and Middle East, Africa country, please connect below
website and select your country.
- URL: www.samsungsecurity.com

Downloaded from www.Manualslib.com manuals search engine

 SAMSUNG TECHWIN

PT01-004005A

1111111111111111111111111111111111111111111

Downloaded from www.Manualslib.com manuals search engine