PYDAH COLLEGE OF ENGINEERING

(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)

YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Department of Mechanical Engineering

Course File Enclosures

Year /Sem: IV-I Name of the Subject: Additive Manufacturing

S.No Contents
1 Vision & Mission of College
2 Vision & Mission of Department
3 Course Objectives & Outcomes
4 Syllabus
5 Roll List
6 Class Time Tables
7 Subject Time Tables
8 Academic Callender
9 Lesson Plan
10 Lecture Notes
11 Question Bank
12 Assignment Questions
13 Mid Question Papers
14 Previous University Question Papers
15 Previous Question Paper
16 Topics Beyond Syllabus
17 Internal Marks
18 Best and Worst Mid Answer Scripts
19 List of e-resources
20 Result Sheet published by university
21 Pass Percentage
22 Sample Assignment Sheet
23 Attainment Sheet
24 DVD with Video lectures, PPT etc.,
25 Course Completion Certificate
 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Pydah College of Engineering

Vision
 To equip the students to face both professional and technical competition across the globe with
complete confidence and the necessary skills.

Mission
 To impart value-based education by integrating holistic teaching and learning with innovative
practices.
 To make students compete in the changing global scenario to realize their dreams.
 To create a conducive environment for the students to acquire skills beyond the curriculum in
their interested areas.
 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Department of Mechanical Engineering

Vision

 To provide students with the information, abilities, morals, and empathy they need to
overcome obstacles in their personal and academic lives.
 To be a center of excellence in higher education with creative teaching, learning, and research
activities; to meet students' academic demands by offering high-quality instruction that will
enable them to become self-sufficient in the long run.
 To adopt a comprehensive strategy for the development of interpersonal and intrapersonal
abilities, which are necessary to establish a fruitful, intelligent and innovative civil society.

Mission

 To maximize human potential in order to take advantage of many future prospects.

 To give the students the opportunity to investigate the economic resources that is readily
available in their community for both employment and societal assistance.
 To improve the recently implemented teaching and learning process for staff, faculty, and
students.
 To help students become more autonomous and critical thinkers so they can overcome a
variety of obstacles.
 To produce and distribute knowledge via creative inquiry and multidisciplinary study in order
to build a meaningful society.
 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Course Objectives & Outcomes

Course Objectives:

1) To understand the principles of prototyping, classification of RP processes and liquid-based RP

systems

2) To understand and apply different types of solid-based RP systems.

3) To understand and apply powder-based RP systems.

4) To understand and apply various rapid tooling techniques.

5) To understand different types of data formats and to explore the applications of AM processes in

various fields

Course Outcomes:

CO1: Understand the principles of prototyping, classification of RP processes and liquid-based RP

systems.

CO2: Understand and apply different types of solid-based RP systems.

CO3: Apply powder-based RP systems.

CO4: Analyze and apply various rapid tooling techniques.

CO5: Understand different types of data formats and explore the applications of AM processes in

various fields.
 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

SYLLABUS

UNIT– I:

INTRODUCTION: Prototyping fundamentals, historical development, fundamentals of rapid

prototyping, advantages and limitations of rapid prototyping, commonly used terms, classification of
RP process.

LIQUID-BASED RAPID PROTOTYPING SYSTEMS: Stereo lithography Apparatus (SLA):

models and specifications, process, working principle, photopolymers, photo polymerization, layering
technology, laser and laser scanning, applications, advantages and disadvantages, case studies. Solid
Ground Curing (SGC): models and specifications, process, working principle, applications, advantages
and disadvantages, case studies.

UNIT– II:

SOLID-BASED RAPID PROTOTYPING SYSTEMS: Laminated object manufacturing (LOM) -

models and specifications, process, working principle, applications, advantages and disadvantages,
case studies. Fused deposition modelling (FDM) - models and specifications, process, working
principle, applications, advantages and disadvantages, case studies.

UNIT– III:

POWDER BASED RAPID PROTOTYPING SYSTEMS: Selective laser sintering (SLS): models
and specifications, process, working principle, applications, advantages and disadvantage studies.
Three-dimensional printing (3DP): models and specifications, process, working principle,
applications, advantages and disadvantages, case studies.

UNIT– IV:

RAPID TOOLING: Introduction to rapid tooling (RT), conventional tooling Vs RT, Need for RT.
rapid tooling classification: indirect rapid tooling methods: spray metal deposition, RTV epoxy tools,
Ceramic tools, investment casting, spin casting, die casting, sand casting process. Direct rapid tooling:
Direct AIM, LOM Tools, and Direct Metal Tooling using 3DP
 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

UNIT– V:

RAPID PROTOTYPING DATA FORMATS: STL Format, STL File Problems, consequence of
building valid and invalid tessellated models, STL file Repairs: Generic Solution, other Translators,
and Newly Proposed Formats.

RP APPLICATIONS: Application in engineering, analysis and planning, aerospace industry,

automotive industry, jewelry industry, coin industry, GIS application, RP medical and bioengineering
applications: customized implants and prosthesis, forensic sciences.

TEXT BOOKS:

1.Rapid prototyping: Principles and Applications /Chua C.K., Leong K.F. and LIM

C.S/World Scientific publications

REFERENCES:

1. Rapid Manufacturing / D.T. Pham and S.S. Dimov/Springer

2. Wohlers Report 2000 /Terry T Wohlers/Wohlers Associates

3. Rapid Prototyping & Manufacturing / Paul F.Jacobs/ASME Press

4. Rapid Prototyping / Chua and Liou

 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Students Roll List

S.No Regd.no Name Of the Candidate

1 206T1A0301 ATTILI VENKATA SRIRAM

2 206T1A0302 ELUGANTI BULLI KRISHNA

3 206T1A0303 ELUGANTI RAJU

4 206T1A0304 GURRAM VARUN KUMAR

5 206T1A0305 GUTHULA RAVI KIRAN

6 206T1A0306 KOYYA OMKAR

7 206T1A0307 MALLADI BHAGYA RAJU

8 206T1A0308 MARISA PRABHU KIRAN

9 206T1A0309 MEDA RAJESH

10 206T1A0311 REDDY AJAY

11 216T5A0301 BANDARU SIMHACHALAM

12 216T5A0302 BODA KALYAN

13 216T5A0303 DADALA SANTHOSH KUMAR

14 216T5A0304 EERATHI VIJAYA NARAYANA

15 216T5A0305 GANDI SIDDU

16 216T5A0306 GEDALA SAI GANESH

17 216T5A0307 ILLA SATISH

18 216T5A0308 KODA RAVITEJA

19 216T5A0309 MALLADI GOVARAJU

20 216T5A0310 MUNTHA SRINU

 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

21 216T5A0311 MYLA SATYA JAYA SANTOSH

22 216T5A0312 PEDDIREDDY JAGADEESH

23 216T5A0313 POLAMARASETTI RAVIKUMAR

24 216T5A0314 PUTREVU SRINIVASU

25 216T5A0315 SUNNAPU SATYA SAI

26 216T5A0316 THUMU SRIRAM

27 216T5A0317 THURPATI NARENDRA

28 216T5A0318 TUMMA UDAY KUMAR

VESSAM NAGA VEERA
216T5A0319
29 PADMARAJU
YALLA NAGA GANGA SAI
216T5A0320
30 CHAKRADHAR

31 216T5A0321 YALLA SURYA KIRAN

DEVARAKONDA VEERA
216T5A0323
32 VARAPRASAD

33 216T5A0324 EERLA AJAY

34 216T5A0325 GANJA DURGA PRASAD

35 216T5A0326 SANAPALA PRAVEEN KUMAR

KATHURY VEERA VENKATA
216T5A0327
36 CHARAN

37 216T5A0328 AKKULA RAVI KUMAR

38 216T5A0329 ANUBOYINA RAMUDU

216T5A0330 UPPU KUMAR RAJ

39
216T5A0331 K PURNA BHHEMA CHANDRA
40

Signature of the HOD Signature of the Principal

PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

CLASS TIME TABLE

 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

PYDAH COLLEGE OF ENGINEERING

6T (Approves by AICTE, Newdelhi & Affiliated to JNT University Kakinada)
KAKINADA, Yanam Road, Patavala – 533461.
Department of mechanical engineering
IV B.TECH I SEM (R20) A.Y: 2023-24
Class Incharge: Mr.K.SANTHI VINAY Room No: w.e.f: 19/06/2023
Hrs 1 2 BREAK 3 4 LUNCH 5 6 7
Day/Time 09:15 - 10:05 10:05 - 10:55 10:55 - 11:10 11:10 - 12:00 12:00 - 12:50 12:45 - 01:45 01:45 - 02:35 02:35 - 03:25 03:25 - 04:15
SE UCMP GT AMFG
CRT
MONDAY (KSV) (CHLA) (IM) (KSR)
PPE SE AMFG UCMP
CRT
TUESDAY (VVRK) (KSV) (KSR) (CHLA)

GT PPE AMFG SE
CRT
WEDNESDAY (IM) (VVRK) (KSR) (KSV)
BREAK LUNCH
PPE SE UCMP
GT (IM) CRT
THURSDAY (VVRK) (KSV) (CHLA)

SE AMFG UCMP PPE

Mechatronics Lab (KSR)
FRIDAY (KSV) (KSR) (CHLA) (VVRK)
UCMP PPE GT AMFG GT
SPORTS
SATURDAY (CHLA) (VVRK) (IM) (KSR) (IM)

SUBJECT NAME Subject code NAME OF THE FACULTY Faculty Sign

1. Unconventional Machining Processes UCMP Mrs.CH.L.ASLESHA
2.Power Plant Engineering PPE Mr.V.V.RAMA KRISHNA
3.Safty Engineering SE Mr.K.SANTHI VINAY
4.Additive Manufacturing AMFG Mr.K.SOMARAJU
5.Green Technology GT Mr.INAITHUL MOHAMMED
6.Universal Human Values: Understanding Harmony UHV Mr.KIS NAIDU
7.Mechatronics Lab M-LAB Mr.K.SOMARAJU

Signature of Class incharge Signature of HOD PRINCIPAL

SUBJECT TIME TABLE

 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Hrs 1 2 BREAK 3 4 LUNCH 5 6 7

Day/Time 09:15 - 10:05 10:05 - 10:55 10:55 - 11:10 11:10 - 12:00 12:00 - 12:50 12:45 - 01:45 01:45 - 02:35 02:35 - 03:25 03:25 - 04:15
MONDAY AMFG (KSR)
TUESDAY AMFG (KSR)
WEDNESDAY AMFG (KSR)
BREAK LUNCH
THURSDAY
FRIDAY
SATURDAY AMFG (KSR)

ACADEMIC CALENDER
PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Lesson Plan
 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Unit CO Teaching
NO Name of the Topic No. of Classes
No Aid
 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

INTRODUCTION: Prototyping fundamentals,

Black
historical development, fundamentals of rapid
Board & 2
prototyping,
Chalk
Black
Advantages and limitations of rapid prototyping,
Board & 2
commonly used terms, classification of RP process.
Chalk
LIQUID-BASED RAPID PROTOTYPING
SYSTEMS: Stereo lithography Apparatus (SLA): Black
Models and specifications, process, working principle, Board & 2
1 1
photopolymers, photo polymerization, PPT

Layering technology, laser and laser scanning, Black

applications, advantages and disadvantages, case Board & 2
studies. Chalk
Solid Ground Curing (SGC): models and Black
specifications, process, working principle, Board & 2
Chalk
Black
Applications, advantages and disadvantages, case
Board & 2
studies
PPT
SOLID-BASED RAPID PROTOTYPING SYSTEMS: Black
Laminated object manufacturing (LOM) - Board & 2
Chalk
Black
Models and specifications,
Board & 2
Chalk
Black
2 Process, working principle,
2 Board & 2
Chalk
Black
Applications, advantages and disadvantages. Board & 1
Chalk
Black
Case studies.
Board & 1
PPT
Black
Fused deposition modelling (FDM) Board & 1
Chalk
Black
Models and specifications, process Board & 1
Chalk
Black
Working principle, applications, Board & 1
Chalk
Black
Advantages and disadvantages, case studies
Board & 1
Chalk
 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

POWDER BASED RAPID PROTOTYPING Black

SYSTEMS: Selective laser sintering (SLS) Board & 2
Chalk
Models and specifications, process, working principle, Black
Board & 2
Chalk
Black
3 Applications, advantages and disadvantages, case Board & 2
studies. PPT
3
Three-dimensional printing (3DP): models and
Black
specifications, process,
Board & 2
PPT
Black
Board & 2
Working principle, applications, Chalk
Advantages and disadvantages, case studies. Black
Board & 2
Chalk
RAPID TOOLING: Introduction to rapid tooling (RT), Black
conventional tooling Vs RT, Need for RT. Board 3
&PPT
Rapid tooling classification: indirect rapid tooling Black
methods: spray metal deposition Board & 2
Chalk
RTV epoxy tools, Ceramic tools, investment casting, Black
4 spin casting, die casting, sand casting process. Board & 2
4 Chalk
Black
Board & 2
Direct rapid tooling: Direct AIM, LOM Tools, and Chalk
Black
Board & 3
Direct Metal Tooling using 3DP. Chalk
RAPID PROTOTYPING DATA FORMATS: STL
Black
Format, STL File Problems, consequence of
Board & 2
building valid and invalid tessellated models,
Chalk
STL file Repairs: Generic Solution, other Translators, Black
and Newly Proposed Formats. Board & 3
5
Chalk
RP APPLICATIONS: Application in engineering,
analysis and planning, aerospace industry, Black
Automotive industry, jewelry industry, coin industry, Board & 3
GIS application, RP medical and Chalk
 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Bioengineering applications: customized implants and

prosthesis, forensic sciences

Total Hours 56
PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Lecture Notes

Question Bank
 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

1. What are the fundamental principles of prototyping, and how has its historical development shaped
modern rapid prototyping techniques?

2. Explain the working principle of Stereo lithography Apparatus (SLA) in detail.

3. What are the specifications and components of an SLA system, and how do they contribute to its
functionality?

4. Describe the process of photopolymerization and its role in SLA technology.

5. How does layering technology function within SLA systems, and what advantages and limitations
does it present?

6. What are the models and specifications of Laminated Object Manufacturing (LOM) systems, and
how do they contribute to the prototyping process?

7. Describe the process and working principle of LOM technology in detail.

8. What are the common applications of LOM, and how does it benefit various industries?

9. Discuss the advantages and disadvantages of LOM compared to other rapid prototyping methods.

10. Provide examples of case studies demonstrating successful applications of LOM technology.

11. What are the models and specifications of Selective Laser Sintering (SLS) systems, and how do
they facilitate rapid prototyping?

12. Explain the process and working principle of Selective Laser Sintering (SLS) technology.

13. How is Selective Laser Sintering (SLS) utilized in various industries, and what are its primary
applications?

14. Discuss the advantages and disadvantages of Selective Laser Sintering (SLS) compared to other
rapid prototyping methods.

15. Provide examples of case studies demonstrating successful applications of Selective Laser
Sintering (SLS) technology.

16. Explain the concept of direct Rapid Tooling and its significance in the manufacturing industry.
 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

17. Describe direct Rapid Tooling methods such as Direct AIM, LOM Tools, and Direct Metal
Tooling using 3DP.

18. Analyze the advantages and limitations of direct Rapid Tooling methods.

19. Compare indirect and direct Rapid Tooling methods in terms of their suitability for different
applications.

20. Provide examples or case studies illustrating the successful implementation of both indirect and
direct Rapid Tooling methods in various manufacturing scenarios.

21. Explain the STL format and its significance in rapid prototyping.

22. Identify common problems associated with STL files and their consequences.

23. Analyze the impact of building both valid and invalid tessellated models on the rapid prototyping
process.

24. Discuss methods for repairing STL files, including generic solutions, alternative translators, and
newly proposed formats.

25. Explore the engineering applications of rapid prototyping, including design validation and product
development.
 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Assignment Questions

1. Discuss the role of lasers and laser scanning in SLA processes.

2. What are the common applications of SLA technology, and how does it benefit various industries?

3. Compare and contrast the advantages and disadvantages of SLA and Solid Ground Curing (SGC)
rapid prototyping systems.

4. Explain the working principle of Solid Ground Curing (SGC) systems and their applications.

5. Provide examples of case studies showcasing the successful implementation of SLA and SGC
technologies in real-world scenarios.

6. What are the models and specifications of Fused Deposition Modelling (FDM) systems, and how do
they differ from other rapid prototyping technologies?

7. Explain the process and working principle of FDM technology.

8. How are FDM systems utilized in various industries, and what specific applications do they serve?

9. Analyze the advantages and disadvantages of FDM compared to alternative rapid prototyping
methods.

10. Present case studies highlighting the successful implementation of FDM technology in real-world
scenarios.

11. What are the models and specifications of Three-Dimensional Printing (3DP) systems, and how do
they differ from other rapid prototyping technologies?

12. Describe the process and working principle of Three-Dimensional Printing (3DP) technology.

13. How are Three-Dimensional Printing (3DP) systems used in various industries, and what specific
applications do they serve?

14. Analyze the advantages and disadvantages of Three-Dimensional Printing (3DP) compared to
alternative rapid prototyping methods.

15. Present case studies highlighting the successful implementation of Three-Dimensional Printing
(3DP) technology in real-world scenarios.
 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

16. Explain the concept of Rapid Tooling (RT) and compare it to conventional tooling methods.

17. Identify the reasons why Rapid Tooling (RT) is necessary in modern manufacturing.

18. Classify Rapid Tooling methods into indirect and direct approaches.

19. Describe the indirect Rapid Tooling methods, including spray metal deposition, RTV epoxy tools,
ceramic tools, investment casting, spin casting, die casting, and sand casting processes.

20. Discuss the advantages and limitations of indirect Rapid Tooling methods.

21. Describe the applications of rapid prototyping in the automotive industry, such as concept
modeling and functional testing.

22. Discuss the use of rapid prototyping techniques in the jewelry and coin industries for creating
intricate designs.

23. Explore the application of rapid prototyping in Geographic Information Systems (GIS) for creating
physical models.

24. Explain the medical and bioengineering applications of rapid prototyping, including customized
implants and prosthetics.

25. Discuss the role of rapid prototyping in forensic sciences for creating physical replicas of evidence.
 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Mid Question papers

PYDAH COLLEGE OF ENGINEERING

IV B.Tech I Semester I MID Examinations

ADDITIVE MANUFACTURING

MECHANICAL ENGINEERING

Time : 90 Mins Max. Marks:30 Date:

S.No Note: Answer All Questions Marks BTL CO PO

Discuss the role of lasers and laser scanning in

1. 10 L2 CO1 PO1, PO 2
SLA processes.
 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

What are the models and specifications of Fused

PO1 , PO 2,
2. Deposition Modelling (FDM) systems, and how 10 L2 CO 2
PO 3
do they differ from other rapid prototyping
What are the models and specifications of Three-
technologies? PO1, PO 2,
3. Dimensional Printing (3DP) systems, and how do 10 L2 CO 3
PO 3
they differ from other rapid prototyping
technologies?

PYDAH COLLEGE OF ENGINEERING

IV B.Tech I Semester II MID Examinations

ADDITIVE MANUFACTURING

MECHANICAL ENGINEERING

Time : 90 Mins Max. Marks:30 Date:

S.No Note: Answer All Questions Marks BTL CO PO

Explain the concept of Rapid Tooling (RT) and

1. 10 L2 CO3 PO1, PO 2
compare it to conventional tooling methods.

Discuss the advantages and limitations of indirect PO1 , PO 2,

2. 10 L2 CO 4
PO 3
Rapid Tooling methods.
Discuss the role of rapid prototyping in forensic PO1, PO 2,
3. 10 L2 CO 5
sciences for creating physical replicas of PO 3
evidence.
PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Previous University Question Papers

 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Topics beyond Syllabus

1. Advanced Materials in Rapid Prototyping

2. Multi-Material and Multi-Functional Prototyping

3. Hybrid Prototyping Systems

4. Generative Design and Optimization for Rapid Prototyping

5. Additive Manufacturing for Electronics

6. In-Situ Monitoring and Quality Control

7. Post-Processing Techniques

8. Sustainability and Environmental Impact

9. Regulatory Considerations and Standards

10. Applications in Emerging Industries

PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Internal Marks

Best and Worst Mid Answer Scripts

 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

List of e-resources

1. https://home.iitk.ac.in/~nsinha/Additive_Manufacturing%20I.pdf

2. https://application.wiley-vch.de/books/sample/3527347917_c01.pdf

3. https://www.youtube.com/watch?v=EHvO-MlzAIM

4. https://www.youtube.com/watch?
v=9b5Uoejj190&list=PLglMrxSI8n87f0zOOrlOWv9XYByRi1DlL
PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Result Sheet published by university

 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Pass Percentage

S.No No.of Students Attended No.of Pass % Pass

1 1

Sign of Faculty Sign of HOD

PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Sample Assignment Sheet

Attainment Sheet

DVD with video lectures, PPT etc.,

 PYDAH COLLEGE OF ENGINEERING
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
YANAM ROAD, PATAVALA KAKINADA, 533461, E.G.Dist,

Course Completion Certificate

I, , faculty in the department of Mechanical have taught ADDITIVE

MANUFACTURING subject to students of IV B.tech - I sem and Mechanical during academic year

2023-24.I certified that I have completed FIVE units on ________

Signature of Faculty Signature of HOD

Date: Date: