12 March 2024 01.

41 PM

PAGE NO. 1

****************************************************
* *
* STAAD.Pro CONNECT Edition *
* Version 22.00.00.15 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= MAR 12, 2024 *
* Time= 13:34:21 *
* *
* Licensed to: only @ ::LAVTeam:: (R) *
****************************************************

1. STAAD SPACE
INPUT FILE: C:\STAAAD~1\GRC FRAME.STD
2. START JOB INFORMATION
3. END JOB INFORMATION
4. INPUT WIDTH 79
5. UNIT METER KN
6. JOINT COORDINATES
7. 1 0 0 0; 2 3.21601 0 0; 3 6.43201 0 0; 4 9.64802 0 0; 5 12.864 0 0
8. 6 0 3.00001 0; 7 3.21601 3.00001 0; 8 6.43201 3.00001 0
9. 9 9.64802 3.00001 0; 10 12.864 3.00001 0
10. MEMBER INCIDENCES
11. 1 1 6; 2 2 7; 3 3 8; 4 4 9; 5 5 10; 6 6 7; 7 7 8; 8 8 9; 9 9 10
12. DEFINE MATERIAL START
13. ISOTROPIC STEEL
14. E 1.99947E+08
15. POISSON 0.3
16. DENSITY 76.8191
17. ALPHA 6.5E-06
18. DAMP 0.03
19. TYPE STEEL
20. STRENGTH RY 1.5 RT 1.2
21. END DEFINE MATERIAL
22. MEMBER PROPERTY AMERICAN
23. 1 TO 5 TABLE ST W12X136
24. MEMBER PROPERTY BRITISH
25. 6 TO 9 TABLE ST UC356X368X153
26. CONSTANTS
27. MATERIAL STEEL ALL
28. SUPPORTS
29. 1 TO 5 FIXED
30. DEFINE WIND LOAD

*** NOTE: If any floor diaphragm is present in the model Wind Load definition
should be defined after Floor Diaphragm definition. Otherwise wind
load generation may be unsuccessful during analysis.

31. TYPE 1 WIND 1

32. <! STAAD PRO GENERATED DATA DO NOT MODIFY !!!
33. ASCE-7-2010:PARAMS 105.000 MPH 0 1 1 0 0.000 FT 0.000 FT 0.000 FT 1 1 3.000 -

C:\STAAAD~1\GRC FRAME.anl Page 1 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 2

34. M 1.000 M 16.080 M 2.000 0.010 0 0 0 0 0 0.575 1.000 1.000 0.850 0 0 0 0 -

35. 0.867 0.800 -0.550
36. !> END GENERATED DATA BLOCK
37. INT 0.820968 0.820968 HEIG 0 4.57201
38. EXP 0.9 JOINT 1 TO 10
39. <! STAAD PRO GENERATED DATA DO NOT MODIFY !!!
40. ASCE-7-2010:PARAMS 103.000 MPH 0 1 1 0 0.000 FT 0.000 FT 0.000 FT 1 1 3.000 -
41. M 1.000 M 16.080 M 2.000 0.010 0 0 0 0 0 0.575 1.000 1.000 0.850 0 0 0 0 -
42. 0.867 0.800 -0.550
43. !> END GENERATED DATA BLOCK
44. <! STAAD PRO GENERATED DATA DO NOT MODIFY !!!
45. ASCE-7-2010:PARAMS 103.000 MPH 0 1 1 0 0.000 FT 0.000 FT 0.000 FT 1 1 3.000 -
46. M 1.000 M 16.080 M 2.000 0.010 0 0 0 0 0 0.575 1.000 1.000 0.850 0 0 0 0 -
47. 0.867 0.800 -0.550
48. !> END GENERATED DATA BLOCK
49. LOAD 1 LOADTYPE DEAD TITLE DEAD LOAD
50. SELFWEIGHT Y -1 LIST ALL
51. LOAD 2 LOADTYPE WIND TITLE WIND LOAD
52. WIND LOAD X 1 TYPE 1 YR 0 3
*WARNING- NO MEMBERS LOADED FOR A WIND LOAD GENERATION.
53. WIND LOAD -X 1 TYPE 1 YR 0 3
*WARNING- NO MEMBERS LOADED FOR A WIND LOAD GENERATION.
54. WIND LOAD X -1 TYPE 1 YR 0 3
*WARNING- NO MEMBERS LOADED FOR A WIND LOAD GENERATION.
55. WIND LOAD -X -1 TYPE 1
*WARNING- NO MEMBERS LOADED FOR A WIND LOAD GENERATION.
56. LOAD COMB 3 ULC, 1.4 DEAD
57. 1 1.4
58. LOAD COMB 4 ULC, 1.2 DEAD
59. 1 1.2
60. LOAD COMB 5 ULC, 1.2 DEAD + 0.8 WIND
61. 1 1.2 2 0.8
62. LOAD COMB 6 ULC, 1.2 DEAD + 1.6 WIND
63. 1 1.2 2 1.6
64. LOAD COMB 7 ULC, 0.9 DEAD + 1.6 WIND
65. 1 0.9 2 1.6
66. LOAD COMB 8 ULC, 0.9 DEAD
67. 1 0.9
68. PERFORM ANALYSIS PRINT ALL

C:\STAAAD~1\GRC FRAME.anl Page 2 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 3

P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS 10 NUMBER OF MEMBERS 9

NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 5

Using 64-bit analysis engine.

SOLVER USED IS THE OUT-OF-CORE BASIC SOLVER

ORIGINAL/FINAL BAND-WIDTH= 5/ 2/ 12 DOF

TOTAL PRIMARY LOAD CASES = 2, TOTAL DEGREES OF FREEDOM = 30
TOTAL LOAD COMBINATION CASES = 6 SO FAR.
SIZE OF STIFFNESS MATRIX = 1 DOUBLE KILO-WORDS
REQRD/AVAIL. DISK SPACE = 12.0/ 283780.4 MB

C:\STAAAD~1\GRC FRAME.anl Page 3 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 4

LOADING 1 LOADTYPE DEAD TITLE DEAD LOAD

-----------

SELFWEIGHT Y -1.000

ACTUAL WEIGHT OF THE STRUCTURE = 48.932 KN

LOADING 2 LOADTYPE WIND TITLE WIND LOAD

-----------

FOR LOADING - 1
APPLIED JOINT EQUIVALENT LOADS
JOINT FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM-Z
1 0.00000E+00-2.96621E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
2 0.00000E+00-2.96621E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
3 0.00000E+00-2.96621E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
4 0.00000E+00-2.96621E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
5 0.00000E+00-2.96621E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
6 0.00000E+00-5.37496E+00 0.00000E+00 0.00000E+00 0.00000E+00-1.29109E+00
7 0.00000E+00-7.78370E+00 0.00000E+00 0.00000E+00 0.00000E+00 7.97355E-06
8 0.00000E+00-7.78370E+00 0.00000E+00 0.00000E+00 0.00000E+00-8.29681E-06
9 0.00000E+00-7.78368E+00 0.00000E+00 0.00000E+00 0.00000E+00 2.45672E-05
10 0.00000E+00-5.37494E+00 0.00000E+00 0.00000E+00 0.00000E+00 1.29107E+00

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 1

LOADTYPE DEAD TITLE DEAD LOAD

CENTER OF FORCE BASED ON Y FORCES ONLY (METE).

(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.643200486E+01
Y = 0.209072171E+01
Z = 0.000000000E+00
TOTAL APPLIED LOAD 1

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 1 )

SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = -48.93
SUMMATION FORCE-Z = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 0.00 MY= 0.00 MZ= -314.73

TOTAL REACTION LOAD 1

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 1 )

SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = 48.93
SUMMATION FORCE-Z = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 0.00 MY= 0.00 MZ= 314.73

C:\STAAAD~1\GRC FRAME.anl Page 4 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 5

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 1)

MAXIMUMS AT NODE
X = 5.27657E-05 6
Y = -4.67145E-04 7
Z = 0.00000E+00 0
RX= 0.00000E+00 0
RY= 0.00000E+00 0
RZ= -6.57678E-06 6

EXTERNAL AND INTERNAL JOINT LOAD SUMMARY ( KN METE )-

JT EXT FX/ EXT FY/ EXT FZ/ EXT MX/ EXT MY/ EXT MZ/
INT FX INT FY INT FZ INT MX INT MY INT MZ

SUPPORT=1
1 0.00 -2.97 0.00 0.00 0.00 0.00
-0.34 -5.16 0.00 0.00 0.00 0.28 111111

2 0.00 -2.97 0.00 0.00 0.00 0.00

0.04 -8.01 0.00 0.00 0.00 -0.04 111111

3 0.00 -2.97 0.00 0.00 0.00 0.00

-0.00 -7.75 0.00 0.00 0.00 0.00 111111

4 0.00 -2.97 0.00 0.00 0.00 0.00

-0.04 -8.01 0.00 0.00 0.00 0.04 111111

5 0.00 -2.97 0.00 0.00 0.00 0.00

0.34 -5.16 0.00 0.00 0.00 -0.28 111111

FOR LOADING - 2
APPLIED JOINT EQUIVALENT LOADS
JOINT FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM-Z

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 2

LOADTYPE WIND TITLE WIND LOAD

TOTAL APPLIED LOAD 2

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 2 )

SUMMATION FORCE-X = 0.0000000E+00
SUMMATION FORCE-Y = 0.0000000E+00
SUMMATION FORCE-Z = 0.0000000E+00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 0.0000000E+00 MY= 0.0000000E+00 MZ= 0.0000000E+00

TOTAL REACTION LOAD 2

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 2 )

SUMMATION FORCE-X = 0.0000000E+00
SUMMATION FORCE-Y = 0.0000000E+00
SUMMATION FORCE-Z = 0.0000000E+00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 0.0000000E+00 MY= 0.0000000E+00 MZ= 0.0000000E+00

C:\STAAAD~1\GRC FRAME.anl Page 5 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 6

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 2)

MAXIMUMS AT NODE
X = 0.00000E+00 0
Y = 0.00000E+00 0
Z = 0.00000E+00 0
RX= 0.00000E+00 0
RY= 0.00000E+00 0
RZ= 0.00000E+00 0

EXTERNAL AND INTERNAL JOINT LOAD SUMMARY ( KN METE )-

JT EXT FX/ EXT FY/ EXT FZ/ EXT MX/ EXT MY/ EXT MZ/
INT FX INT FY INT FZ INT MX INT MY INT MZ

SUPPORT=1

LOAD COMBINATION NO. 3

ULC, 1.4 DEAD

LOADING- 1.
FACTOR - 1.40

LOAD COMBINATION NO. 4

ULC, 1.2 DEAD

LOADING- 1.
FACTOR - 1.20

LOAD COMBINATION NO. 5

ULC, 1.2 DEAD + 0.8 WIND

LOADING- 1. 2.
FACTOR - 1.20 0.80

LOAD COMBINATION NO. 6

ULC, 1.2 DEAD + 1.6 WIND

LOADING- 1. 2.
FACTOR - 1.20 1.60

LOAD COMBINATION NO. 7

ULC, 0.9 DEAD + 1.6 WIND

LOADING- 1. 2.
FACTOR - 0.90 1.60

LOAD COMBINATION NO. 8

ULC, 0.9 DEAD

LOADING- 1.
FACTOR - 0.90

************ END OF DATA FROM INTERNAL STORAGE ************

C:\STAAAD~1\GRC FRAME.anl Page 6 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 7

69. PARAMETER 1
70. CODE AISC UNIFIED 2016
71. FU 415000 ALL
72. FYLD 250000 ALL
73. STEEL MEMBER TAKE OFF ALL

C:\STAAAD~1\GRC FRAME.anl Page 7 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 8

STEEL TAKE OFF

STEEL TAKE-OFF
--------------

PROFILE LENGTH(METE) WEIGHT(KN )

ST W12X136 15.00 29.662

ST UC356X368X153 12.86 19.270
----------------
TOTAL = 48.932

MEMBER PROFILE LENGTH WEIGHT

(METE) (KN )

1 ST W12X136 3.00 5.932

2 ST W12X136 3.00 5.932
3 ST W12X136 3.00 5.932
4 ST W12X136 3.00 5.932
5 ST W12X136 3.00 5.932
6 ST UC356X368X153 3.22 4.817
7 ST UC356X368X153 3.22 4.817
8 ST UC356X368X153 3.22 4.817
9 ST UC356X368X153 3.22 4.817
----------------
TOTAL = 48.932

************ END OF DATA FROM INTERNAL STORAGE ************

74. PARAMETER 2
75. CODE AISC UNIFIED 2016
76. SELECT ALL
STEEL DESIGN

C:\STAAAD~1\GRC FRAME.anl Page 8 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 9

STAAD.PRO MEMBER SELECTION - AISC 360-16 LRFD (V1.1)

********************************************************

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted).

***NOTE : AISC 360-16 Design Statement for STAAD.Pro.

*** AXIS CONVENTION ***:

========================

The capacity results and intermediate results in the report follow the notations
and axes labels as defined in the AISC 360-16 code.
The analysis results are reported in STAAD.Pro axis convention and the AISC 360:16
design results are reported in AISC 360-16 code axis convention.

AISC Spec. STAAD.Pro Description

------------ ----------- -------------
X Z Axis typically parallel to the sections principal major axis.
Y Y Axis typically parallel to the sections principal minor axis.
Z X Longitudinal axis perpendicular to the cross section.

SECTION FORCES AXIS MAPPING: -

AISC Spec. STAAD.Pro Description

------------ ----------- -------------
Pz FX Axial force.
Vy FY Shear force along minor axis.
Vx FZ Shear force along major axis.
Tz MX Torsional moment.
My MY Bending moment about minor axis.
Mx MZ Bending moment about major axis.

*** DESIGN MESSAGES ***:

=======================

1. Section classification reported is for the cross section and loadcase that
produced the worst case design ratio for flexure/compression Capacity results.
2. Results for any Capacity/Check that is not relevant for a section/loadcase
based on the code clause in AISC 360-16 will not be shown in the report.
3. Bending results are reported as being “about” the relevant axis (X/Y), while
the results for shear are reported as being for shear forces “along” the axis.
E.g : Mx indicates bending about the X axis, while Vx indicates shear along
the X axis.

*** ABBREVIATIONS ***:

======================

F-T-B = Flexural-Torsional Buckling

L-T-B = Lateral-Torsional Buckling
F-L-B = Flange Local Buckling
W-L-B = Web Local Buckling
L-L-B = Leg Local Buckling
C-F-Y = Compression Flange Yielding
T-F-Y = Tension Flange Yielding

C:\STAAAD~1\GRC FRAME.anl Page 9 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 10

STAAD.PRO MEMBER SELECTION - AISC 360-16 LRFD (V1.1)

********************************************************

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted).

- Member : 1
|-----------------------------------------------------------------------------|
| Member No: 1 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.079 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 11.38 C Vy: -.4751 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: -.3959 |
|-----------------------------------------------------------------------------|
- Member : 2
|-----------------------------------------------------------------------------|
| Member No: 2 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.107 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 15.37 C Vy: 0.5466E-01 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 0.5545E-01 |
|-----------------------------------------------------------------------------|
- Member : 3
|-----------------------------------------------------------------------------|
| Member No: 3 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.105 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 15.00 C Vy: -.2342E-05 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: -.1344E-05 |
|-----------------------------------------------------------------------------|
- Member : 4
|-----------------------------------------------------------------------------|
| Member No: 4 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.107 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 15.37 C Vy: -.5465E-01 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: -.5544E-01 |
|-----------------------------------------------------------------------------|
- Member : 5
|-----------------------------------------------------------------------------|
| Member No: 5 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.079 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 11.38 C Vy: 0.4751 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 0.3959 |
|-----------------------------------------------------------------------------|
- Member : 6
|-----------------------------------------------------------------------------|
| Member No: 6 Profile: ST UC152X152X23 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.050 Loadcase: 3 |
| Location: 3.22 Ref: Eq.H1-1b |
| Pz: 0.4751 C Vy: -3.669 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 1.983 |
|-----------------------------------------------------------------------------|
- Member : 7
|-----------------------------------------------------------------------------|
| Member No: 7 Profile: ST UC152X152X23 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.047 Loadcase: 3 |
| Location: 0.00 Ref: Eq.H1-1b |
| Pz: 0.4205 C Vy: 3.399 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 1.874 |
|-----------------------------------------------------------------------------|

C:\STAAAD~1\GRC FRAME.anl Page 10 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 11

STAAD.PRO MEMBER SELECTION - AISC 360-16 LRFD (V1.1)

********************************************************

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted).

- Member : 8
|-----------------------------------------------------------------------------|
| Member No: 8 Profile: ST UC152X152X23 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.047 Loadcase: 3 |
| Location: 3.22 Ref: Eq.H1-1b |
| Pz: 0.4205 C Vy: -3.399 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 1.874 |
|-----------------------------------------------------------------------------|
- Member : 9
|-----------------------------------------------------------------------------|
| Member No: 9 Profile: ST UC152X152X23 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.050 Loadcase: 3 |
| Location: 0.00 Ref: Eq.H1-1b |
| Pz: 0.4751 C Vy: 3.669 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 1.983 |
|-----------------------------------------------------------------------------|

77. PARAMETER 3
78. CODE AISC UNIFIED 2016
79. SELECT OPTIMIZED
STEEL DESIGN

C:\STAAAD~1\GRC FRAME.anl Page 11 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 12

STAAD.PRO CODE CHECKING - AISC 360-16 LRFD (V1.1)

*****************************************************

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted).

***NOTE : AISC 360-16 Design Statement for STAAD.Pro.

*** AXIS CONVENTION ***:

========================

The capacity results and intermediate results in the report follow the notations
and axes labels as defined in the AISC 360-16 code.
The analysis results are reported in STAAD.Pro axis convention and the AISC 360:16
design results are reported in AISC 360-16 code axis convention.

AISC Spec. STAAD.Pro Description

------------ ----------- -------------
X Z Axis typically parallel to the sections principal major axis.
Y Y Axis typically parallel to the sections principal minor axis.
Z X Longitudinal axis perpendicular to the cross section.

SECTION FORCES AXIS MAPPING: -

AISC Spec. STAAD.Pro Description

------------ ----------- -------------
Pz FX Axial force.
Vy FY Shear force along minor axis.
Vx FZ Shear force along major axis.
Tz MX Torsional moment.
My MY Bending moment about minor axis.
Mx MZ Bending moment about major axis.

*** DESIGN MESSAGES ***:

=======================

1. Section classification reported is for the cross section and loadcase that
produced the worst case design ratio for flexure/compression Capacity results.
2. Results for any Capacity/Check that is not relevant for a section/loadcase
based on the code clause in AISC 360-16 will not be shown in the report.
3. Bending results are reported as being “about” the relevant axis (X/Y), while
the results for shear are reported as being for shear forces “along” the axis.
E.g : Mx indicates bending about the X axis, while Vx indicates shear along
the X axis.

*** ABBREVIATIONS ***:

======================

F-T-B = Flexural-Torsional Buckling

L-T-B = Lateral-Torsional Buckling
F-L-B = Flange Local Buckling
W-L-B = Web Local Buckling
L-L-B = Leg Local Buckling
C-F-Y = Compression Flange Yielding
T-F-Y = Tension Flange Yielding

C:\STAAAD~1\GRC FRAME.anl Page 12 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 13

STAAD.PRO CODE CHECKING - AISC 360-16 LRFD (V1.1)

*****************************************************

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted).

- Member : 1
|-----------------------------------------------------------------------------|
| Member No: 1 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.079 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 11.38 C Vy: -.4751 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: -.3959 |
|-----------------------------------------------------------------------------|
- Member : 2
|-----------------------------------------------------------------------------|
| Member No: 2 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.107 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 15.37 C Vy: 0.5466E-01 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 0.5545E-01 |
|-----------------------------------------------------------------------------|
- Member : 3
|-----------------------------------------------------------------------------|
| Member No: 3 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.105 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 15.00 C Vy: -.2342E-05 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: -.1344E-05 |
|-----------------------------------------------------------------------------|
- Member : 4
|-----------------------------------------------------------------------------|
| Member No: 4 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.107 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 15.37 C Vy: -.5465E-01 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: -.5544E-01 |
|-----------------------------------------------------------------------------|
- Member : 5
|-----------------------------------------------------------------------------|
| Member No: 5 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.079 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 11.38 C Vy: 0.4751 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 0.3959 |
|-----------------------------------------------------------------------------|
- Member : 6
|-----------------------------------------------------------------------------|
| Member No: 6 Profile: ST UC152X152X23 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.050 Loadcase: 3 |
| Location: 3.22 Ref: Eq.H1-1b |
| Pz: 0.4751 C Vy: -3.669 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 1.983 |
|-----------------------------------------------------------------------------|
- Member : 7
|-----------------------------------------------------------------------------|
| Member No: 7 Profile: ST UC152X152X23 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.047 Loadcase: 3 |
| Location: 0.00 Ref: Eq.H1-1b |
| Pz: 0.4205 C Vy: 3.399 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 1.874 |
|-----------------------------------------------------------------------------|

C:\STAAAD~1\GRC FRAME.anl Page 13 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 14

STAAD.PRO CODE CHECKING - AISC 360-16 LRFD (V1.1)

*****************************************************

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted).

- Member : 8
|-----------------------------------------------------------------------------|
| Member No: 8 Profile: ST UC152X152X23 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.047 Loadcase: 3 |
| Location: 3.22 Ref: Eq.H1-1b |
| Pz: 0.4205 C Vy: -3.399 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 1.874 |
|-----------------------------------------------------------------------------|
- Member : 9
|-----------------------------------------------------------------------------|
| Member No: 9 Profile: ST UC152X152X23 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.050 Loadcase: 3 |
| Location: 0.00 Ref: Eq.H1-1b |
| Pz: 0.4751 C Vy: 3.669 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 1.983 |
|-----------------------------------------------------------------------------|

STEEL DESIGN

C:\STAAAD~1\GRC FRAME.anl Page 14 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 15

STAAD.PRO MEMBER SELECTION - AISC 360-16 LRFD (V1.1)

********************************************************

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted).

***NOTE : AISC 360-16 Design Statement for STAAD.Pro.

*** AXIS CONVENTION ***:

========================

The capacity results and intermediate results in the report follow the notations
and axes labels as defined in the AISC 360-16 code.
The analysis results are reported in STAAD.Pro axis convention and the AISC 360:16
design results are reported in AISC 360-16 code axis convention.

AISC Spec. STAAD.Pro Description

------------ ----------- -------------
X Z Axis typically parallel to the sections principal major axis.
Y Y Axis typically parallel to the sections principal minor axis.
Z X Longitudinal axis perpendicular to the cross section.

SECTION FORCES AXIS MAPPING: -

AISC Spec. STAAD.Pro Description

------------ ----------- -------------
Pz FX Axial force.
Vy FY Shear force along minor axis.
Vx FZ Shear force along major axis.
Tz MX Torsional moment.
My MY Bending moment about minor axis.
Mx MZ Bending moment about major axis.

*** DESIGN MESSAGES ***:

=======================

1. Section classification reported is for the cross section and loadcase that
produced the worst case design ratio for flexure/compression Capacity results.
2. Results for any Capacity/Check that is not relevant for a section/loadcase
based on the code clause in AISC 360-16 will not be shown in the report.
3. Bending results are reported as being “about” the relevant axis (X/Y), while
the results for shear are reported as being for shear forces “along” the axis.
E.g : Mx indicates bending about the X axis, while Vx indicates shear along
the X axis.

*** ABBREVIATIONS ***:

======================

F-T-B = Flexural-Torsional Buckling

L-T-B = Lateral-Torsional Buckling
F-L-B = Flange Local Buckling
W-L-B = Web Local Buckling
L-L-B = Leg Local Buckling
C-F-Y = Compression Flange Yielding
T-F-Y = Tension Flange Yielding

C:\STAAAD~1\GRC FRAME.anl Page 15 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 16

STAAD.PRO MEMBER SELECTION - AISC 360-16 LRFD (V1.1)

********************************************************

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted).

- Member : 1
|-----------------------------------------------------------------------------|
| Member No: 1 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.079 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 11.38 C Vy: -.4751 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: -.3959 |
|-----------------------------------------------------------------------------|
- Member : 2
|-----------------------------------------------------------------------------|
| Member No: 2 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.107 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 15.37 C Vy: 0.5466E-01 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 0.5545E-01 |
|-----------------------------------------------------------------------------|
- Member : 3
|-----------------------------------------------------------------------------|
| Member No: 3 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.105 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 15.00 C Vy: -.2342E-05 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: -.1344E-05 |
|-----------------------------------------------------------------------------|
- Member : 4
|-----------------------------------------------------------------------------|
| Member No: 4 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.107 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 15.37 C Vy: -.5465E-01 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: -.5544E-01 |
|-----------------------------------------------------------------------------|
- Member : 5
|-----------------------------------------------------------------------------|
| Member No: 5 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.079 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 11.38 C Vy: 0.4751 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 0.3959 |
|-----------------------------------------------------------------------------|
- Member : 6
|-----------------------------------------------------------------------------|
| Member No: 6 Profile: ST UC152X152X23 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.050 Loadcase: 3 |
| Location: 3.22 Ref: Eq.H1-1b |
| Pz: 0.4751 C Vy: -3.669 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 1.983 |
|-----------------------------------------------------------------------------|
- Member : 7
|-----------------------------------------------------------------------------|
| Member No: 7 Profile: ST UC152X152X23 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.047 Loadcase: 3 |
| Location: 0.00 Ref: Eq.H1-1b |
| Pz: 0.4205 C Vy: 3.399 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 1.874 |
|-----------------------------------------------------------------------------|

C:\STAAAD~1\GRC FRAME.anl Page 16 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 17

STAAD.PRO MEMBER SELECTION - AISC 360-16 LRFD (V1.1)

********************************************************

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted).

- Member : 8
|-----------------------------------------------------------------------------|
| Member No: 8 Profile: ST UC152X152X23 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.047 Loadcase: 3 |
| Location: 3.22 Ref: Eq.H1-1b |
| Pz: 0.4205 C Vy: -3.399 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 1.874 |
|-----------------------------------------------------------------------------|
- Member : 9
|-----------------------------------------------------------------------------|
| Member No: 9 Profile: ST UC152X152X23 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.050 Loadcase: 3 |
| Location: 0.00 Ref: Eq.H1-1b |
| Pz: 0.4751 C Vy: 3.669 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 1.983 |
|-----------------------------------------------------------------------------|

STEEL DESIGN

C:\STAAAD~1\GRC FRAME.anl Page 17 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 18

STAAD.PRO MEMBER SELECTION - AISC 360-16 LRFD (V1.1)

********************************************************

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted).

***NOTE : AISC 360-16 Design Statement for STAAD.Pro.

*** AXIS CONVENTION ***:

========================

The capacity results and intermediate results in the report follow the notations
and axes labels as defined in the AISC 360-16 code.
The analysis results are reported in STAAD.Pro axis convention and the AISC 360:16
design results are reported in AISC 360-16 code axis convention.

AISC Spec. STAAD.Pro Description

------------ ----------- -------------
X Z Axis typically parallel to the sections principal major axis.
Y Y Axis typically parallel to the sections principal minor axis.
Z X Longitudinal axis perpendicular to the cross section.

SECTION FORCES AXIS MAPPING: -

AISC Spec. STAAD.Pro Description

------------ ----------- -------------
Pz FX Axial force.
Vy FY Shear force along minor axis.
Vx FZ Shear force along major axis.
Tz MX Torsional moment.
My MY Bending moment about minor axis.
Mx MZ Bending moment about major axis.

*** DESIGN MESSAGES ***:

=======================

1. Section classification reported is for the cross section and loadcase that
produced the worst case design ratio for flexure/compression Capacity results.
2. Results for any Capacity/Check that is not relevant for a section/loadcase
based on the code clause in AISC 360-16 will not be shown in the report.
3. Bending results are reported as being “about” the relevant axis (X/Y), while
the results for shear are reported as being for shear forces “along” the axis.
E.g : Mx indicates bending about the X axis, while Vx indicates shear along
the X axis.

*** ABBREVIATIONS ***:

======================

F-T-B = Flexural-Torsional Buckling

L-T-B = Lateral-Torsional Buckling
F-L-B = Flange Local Buckling
W-L-B = Web Local Buckling
L-L-B = Leg Local Buckling
C-F-Y = Compression Flange Yielding
T-F-Y = Tension Flange Yielding

C:\STAAAD~1\GRC FRAME.anl Page 18 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 19

STAAD.PRO MEMBER SELECTION - AISC 360-16 LRFD (V1.1)

********************************************************

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted).

- Member : 1
|-----------------------------------------------------------------------------|
| Member No: 1 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.007 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 0.9615 C Vy: -.5089E-01 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: -.4990E-01 |
|-----------------------------------------------------------------------------|
- Member : 2
|-----------------------------------------------------------------------------|
| Member No: 2 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.011 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 1.617 C Vy: 0.9144E-02 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 0.9054E-02 |
|-----------------------------------------------------------------------------|
- Member : 3
|-----------------------------------------------------------------------------|
| Member No: 3 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.010 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 1.505 C Vy: -.2372E-06 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: -.1411E-06 |
|-----------------------------------------------------------------------------|
- Member : 4
|-----------------------------------------------------------------------------|
| Member No: 4 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.011 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 1.617 C Vy: -.9143E-02 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: -.9053E-02 |
|-----------------------------------------------------------------------------|
- Member : 5
|-----------------------------------------------------------------------------|
| Member No: 5 Profile: ST W6X8.5 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.007 Loadcase: 3 |
| Location: 0.00 Ref: Cl.E3 |
| Pz: 0.9615 C Vy: 0.5089E-01 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 0.4989E-01 |
|-----------------------------------------------------------------------------|
- Member : 6
|-----------------------------------------------------------------------------|
| Member No: 6 Profile: ST UC152X152X23 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.008 Loadcase: 3 |
| Location: 3.22 Ref: Eq.H1-1b |
| Pz: 0.5089E-01 C Vy: -.5730 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 0.3216 |
|-----------------------------------------------------------------------------|
- Member : 7
|-----------------------------------------------------------------------------|
| Member No: 7 Profile: ST UC152X152X23 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.008 Loadcase: 3 |
| Location: 0.00 Ref: Eq.H1-1b |
| Pz: 0.4175E-01 C Vy: 0.5198 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 0.3032 |
|-----------------------------------------------------------------------------|

C:\STAAAD~1\GRC FRAME.anl Page 19 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 20

STAAD.PRO MEMBER SELECTION - AISC 360-16 LRFD (V1.1)

********************************************************

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted).

- Member : 8
|-----------------------------------------------------------------------------|
| Member No: 8 Profile: ST UC152X152X23 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.008 Loadcase: 3 |
| Location: 3.22 Ref: Eq.H1-1b |
| Pz: 0.4175E-01 C Vy: -.5198 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 0.3032 |
|-----------------------------------------------------------------------------|
- Member : 9
|-----------------------------------------------------------------------------|
| Member No: 9 Profile: ST UC152X152X23 (BRITISH SECTIO|S)
| Status: PASS Ratio: 0.008 Loadcase: 3 |
| Location: 0.00 Ref: Eq.H1-1b |
| Pz: 0.5089E-01 C Vy: 0.5730 Vx: 0.000 |
| Tz: 0.000 My: 0.000 Mx: 0.3216 |
|-----------------------------------------------------------------------------|

80. PARAMETER 4
81. CODE AISC UNIFIED 2016
82. STEEL TAKE OFF ALL

C:\STAAAD~1\GRC FRAME.anl Page 20 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 21

STEEL TAKE OFF

STEEL TAKE-OFF
--------------

PROFILE LENGTH(METE) WEIGHT(KN )

ST W6X8.5 15.00 1.873

ST UC152X152X23 12.86 2.886
----------------
TOTAL = 4.759

************ END OF DATA FROM INTERNAL STORAGE ************

83. PARAMETER 5
84. CODE AISC UNIFIED 2016
85. STEEL TAKE OFF ALL

C:\STAAAD~1\GRC FRAME.anl Page 21 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 22

STEEL TAKE OFF

STEEL TAKE-OFF
--------------

PROFILE LENGTH(METE) WEIGHT(KN )

ST W6X8.5 15.00 1.873

ST UC152X152X23 12.86 2.886
----------------
TOTAL = 4.759

************ END OF DATA FROM INTERNAL STORAGE ************

86. FINISH

****************************************************************************
**WARNING** SOME MEMBER SIZES HAVE CHANGED SINCE LAST ANALYSIS.
IN THE POST PROCESSOR, MEMBER QUERIES WILL USE THE LAST
ANALYSIS FORCES WITH THE UPDATED MEMBER SIZES.
TO CORRECT THIS INCONSISTENCY, PLEASE DO ONE MORE ANALYSIS.
FROM THE UPPER MENU, PRESS RESULTS, UPDATE PROPERTIES, THEN
FILE SAVE; THEN ANALYZE AGAIN WITHOUT THE GROUP OR SELECT
COMMANDS.
****************************************************************************

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= MAR 12,2024 TIME= 13:34:22 ****

C:\STAAAD~1\GRC FRAME.anl Page 22 of 23

 12 March 2024 01.41 PM

STAAD SPACE -- PAGE NO. 23

************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://www.bentley.com/en/support/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) 1997-2017 Bentley Systems, Inc. *
* http://www.bentley.com *
************************************************************

C:\STAAAD~1\GRC FRAME.anl Page 23 of 23