ADITYA
ADITYA
ADITYA
2023-2024
By
ADITYA MAHADAS GAWAS
1
K. M. AGRAWAL COLLEGE OF ARTS, COMMERCE AND SCIENCE,
GANDHARE, KALYAN (W).
Certificate
This is to certify that Mr. Aditya Mahadas Gawas has worked and duly completed his Project
Work for the degree of Bachelor of Accounting & Finance under the Faculty of Commerce in the
subject of Finance and his project is entitled, “International Capital Budgeting” under my supervision.
I further certify that the entire work has been done by the learner under my guidance and that no part of it has
It is his own work and facts reported by his personal findings and investigations.
Internal Examiner
Self Finance In charge :
Date of Submission:
2
Declaration
I the undersigned Mr. Aditya Mahadas Gawas here by, declare that the work embodied in this
project work titled “International Capital Budgeting” forms my own contribution to the
research work carried out under the guidance of Prof. Devidasani Chandan is a result of my own
research work and has not been previously submitted to any other University for any other Degree/
Diploma to this or any other University.
Wherever reference has been made to previous works of others, it has been clearly indicated as such
and included in the bibliography.
I, here by further declare that all information of this document has been obtained and presented in
accordance with academic rules and ethical conduct.
Certified by
3
Acknowledgement
To list who all have helped me is difficult because they are so numerous and the depth is so enormous.
I would like to acknowledge the following as being idealistic channels and fresh dimensions in the
completion of this project.
I take this opportunity to thank the University of Mumbai for giving me chance to do this project.
I would like to thank my Principal, Dr. Anita Manna for providing the necessary facilities required
for completion of this project.
I take this opportunity to thank our Coordinator, Prof. Mahendra Pandey for his moral support
and guidance.
I would like to thank my College Library, for having provided various reference books and magazines
related to my project.
Lastly, I would like to thank each and every person who directly or indirectly helped me in the
completion of the project especially my Parents and Peers who supported me throughout my
project.
4
CONTENTS
BIBLIOGRAPHY 81
1
CHAPTER 1
INTRODUCTION
Every organization irrespective of its size and mission can be viewed as a financial entity
management of an organization. Financial management focuses not only on the improvement of
funds but also on their efficient use with the objective of maximizing the owners’ wealth. The
allocation of funds is therefore an important function of financial management. The allocation of
funds involves the commitment of funds to assets and activities.
Long term investment decisions are widely known as capital budgeting or capital expenditure
budgeting. It means as to whether or not money should be invested in long term project. This
part is devoted to an in-depth and comparative decision of capital budgeting/capital expenditure
management.
A project is an activity sufficiently self- contained to permit financial and commercial analysis.
In most cases projects represent expenditure of capital funds by pre- existing entities which want
to expand or improve their operation.
In general a project is an activity in which, we will spend money in expectation of returns and
which logically seems to lead itself to planning. Financing and implementation as a unit, is a
specific activity with a specific point and a specific ending point intended to accomplish a
specific objective.
2
To take up a new project, involves a capital investment decision and it is the top management’s
duty to make a situation and feasibility analysis of that particular project and means of financing
and implementing it financing is a rapidly expanding field, which focuses not on the credit status
of a company, but on cash flows that will be generated by a specific project.
Capital budgeting has its origins in the natural resource and infrastructure sectors. The current
demand for infrastructure and capital investments is being fueled by deregulation in the power,
telecommunications, and transportation sectors, by the globalization of product markets and the
need for manufacturing scale, and by the privatization of government –owned entities in
developed and developing countries.
The capital budgeting decision procedure basically involves the evaluation of the desirability of
an investment proposal. It is obvious that the firm must have a systematic procedure for making
capital budgeting decisions.
The procedure must be consistent with the objective of wealth maximization. In view of the
significance of capital budgeting decisions, the procedure must consist of step by step analysis.
1. They influence firm growth in the long term consequences capital investment decisions have
considerable impact on what the firm can do in future.
2. They affect the risk of the firm; it is difficult to reverse capital investment decisions because
the market for used capital investments is ill organized and /or most of the capital equipments
bought by a firm to meet its specific requirements.
3
3. Capital investment decisions involve substantial out lays.
This study highlights the review of capital budgeting and capital expenditure management of the
company. Capital expenditure decisions require careful planning and control. Such long term
planning and control of capital expenditure is called Capital Budgeting. The study also helps to
understand how the company estimates the future project cost. The study also helps to
understand the analysis of the alternative proposals and deciding whether or not to commit funds
to a particular investment proposal whose benefits are to be realized over a period of time longer
than one year. The capital budgeting is based on some tools namely Payback period, Average
Rate of Return, Net Present Value, Profitability Index, and Internal Rate of Return.
4
1.5 METHODOLOGY:-
The information for the study is obtained from two sources namely.
1. Primary Sources
2. Secondary Sources
Primary Sources:
It is the information collected directly without any references. It is mainly through interactions
with concerned officers & staff, either individually or collectively; some of the information has
been verified or supplemented with personal observation. These sources include.
b. Guidelines given by the Project Guide, Mr. SRIRAM TRIPATHY, Dy. Manager,
Budget Section, F & A.
Secondary Sources:
This data is from the number of books and records of the company, the annual reports published
by the company and other magazines. The secondary data is obtained from the following.
a. Collection of required data from annual records, monthly records, internal
Published book or profile of “PARADEEP PHOSPHATES LTD”.
b. Other books and Journals and magazines
c. Annual Reports of the company
d.
5
1.6 Limitations:-
Though the project was completed successfully with a few limitations may .
a) Since the procedure and polices of the company will not allow to disclose
confidential financial information, the project has to be completed with the
available data given to us.
b) The period of study that is 6 weeks is not enough to conduct detailed study of the
project.
c) The study is carried basing on the information and documents provided by the
organization and based on the interaction with the various employees of the
respective departments.
The concept of Capital Budgeting being a very sensitive area of finance has outreached the
attention of many researchers .A number of studies has been conducted on the subject. However
briefing such studies will highlight the importance of the present study. It should safeguard to
avoid the wrong choice of the project and investment to be made. It is necessary for the
management to give proper attention to capital budgeting.
The reason for the popularity of Payback period in the order of significance were stated to be its,
simplicity to use and understand, its emphasis on the early recovery of investment and focus on
risk. It was also found that one third of companies always insisted on the computations of
Payback periods for all projects. For about two-third companies standard Payback period ranged
between three and five years.
6
The reason for the secondary role of Discounted Cash Flow techniques in India included
difficulty in understanding and using these techniques, due to lack of qualified professional and
unwillingness of top management to use Discounted Cash Flow techniques.
One large manufacturing and marketing organization mentioned that conditions of its business
were such that Discounted Cash Flow techniques were not needed. Yet another company stated
that replacement projects were very frequent in the company and it was not considered necessary
to use Discounted Cash Flow technique for evaluating such projects.
The present investment appraisal in practice is raising certain questions in the context.
The answers of the above questions are based on a survey of twenty firms varying on several
dimensions like industry category, size, financial performance and capital intensity. From these
firms, executives, responsible for capital investment evaluation and capital budget preparation
were interviewed
7
CHAPTER-2
INDUSTRY PROFILE
Fertilizer is generally defined as "any material, organic or inorganic, natural or synthetic, which
supplies one or more of the chemical elements required for the plant growth".
Since the essential physiological attribute of seeds is their ability to convert a great duel of
nutrients into grain. The spread of this variety lead for greater consumption of fertilizers
simultaneously with increasing demographic pressure on the agricultural productivity has
assumed more importance. This also contributed to the rising demand for fertilizers.
Agriculture the backbone of Indian Economy still holds its relative importance for more than a
billion peoples. The Government of India from time to time has taken considerable steps for the
upliftment of Agriculture Sector. Here we have analyzed the performance of Fertilizer Industry
being one of the vital parts in agricultural production and Government's policy initiatives for the
same.
Fertilizer in the agricultural process is an important area of concern. Fertilizer industry in India
has succeeded in meeting the demand of all chemical fertilizers in the recent years. The Fertilizer
Industry in India started its first manufacturing unit of Single Super Phosphate (SSP) in Ranipet
near Chennai with a capacity of 6000 MT a year. Then established the first two large-sized
fertilizer plants, one was the Fertilizer & Chemicals Travancore of India Ltd. (FACT) in Cochin,
Kerala, and the another one was Fertilizers Corporation of India (FCI) in Sindri, Bihar. These
two were established as pedestal fertilizer units to have self sufficiency in the production of food
grains. Afterwards, the industry gained impetus in its growth due to green revolution in late
sixties, followed by seventies and eighties when fertilizer industry witnessed an incredible boom
in the fertilizer production.
8
Fertilizer consumption of plant nutrients per unit of grossed cropped area in India is still very
low average being 91.5 kg/ha. Productivity of food grain crops in the country is also quite low,
around 1.6 t/ha, which can certainly be doubled by enhancing per unit average fertilizer use.
Fertilizer consumption has to increase substantially in order to achieve the food grain
requirement of 220 million tons by the year 2002.
The Indian fertilizer industry has succeeded in meeting almost fully the demand of all chemical
fertilizers except for MOP. The industry had a very humble beginning in 1906, when the first
manufacturing unit of Single Super Phosphate (SSP) was set up in Ranipet near Chennai with an
annual capacity of 6000 MT. The Fertilizer & Chemicals Travancore of India Ltd. (FACT) at
Cochin in Kerala and the Fertilizers Corporation of India (FCI) in Sindri in Bihar were the first
large sized -fertilizer plants set up in the forties and fifties with a view to establish an industrial
base to achieve self-sufficiency in food grains. Subsequently, green revolution in the late sixties
gave an impetus to the growth of fertilizer industry in India. The seventies and eighties then
witnessed a significant addition to the fertilizer production capacity.
The Indian fertilizer industry has witnessed a phenomenal growth in the eighties. However, the
growth has tapered off in the nineties and in the recent past only public and cooperative sectors
have made major investments in this industry. Presently public, private and coop. sector share
45, 33 and 22 percent of capacity, respectively, whereas their share in P2O5 capacity is 26, 64
and 10 per cent respectively. New proposals to government for setting-up fresh capacities in
country are mainly from Public and Cooperative sectors.
The installed capacity as on 30.01.2003 has reached a level of 121.10 lakh MT of nitrogen
(inclusive of an installed capacity of 208.42 lakh MT of urea after reassessment of capacity) and
53.60 lakh MT of phosphatic nutrient, making India the 3rd largest fertilizer producer in the
world. The rapid build-up of fertilizer production capacity in the country has been achieved as a
result of a favorable policy environment facilitating large investments in the public, co-operative
and private sectors.
9
Presently, there are 57 large sized fertilizer plants in the country manufacturing a wide range of
nitrogenous, phosphatic and complex fertilizers. Out of these, 29 unit produce urea, 20 units
produce DAP and complex fertilizers 13 plants manufacture Ammonium Sulphate (AS), Calcium
Ammonium Nitrate (CAN) and other low analysis nitrogenous fertilizers. Besides, there are
about 64 medium and small-scale units in operation producing SSP.
The sector experienced a faster growth rate and presently India is the third largest fertilizer
producer.
The Indian fertilizer industry is broadly divided into Nitrogenous, Phosphatic and Potassic
segments. In addition to these, nutrients are combined to produce several complex fertilizers. To
express the nutrient constitution of fertilizers, the grade of a fertilizer is expressed as a set of
three numbers in the order of percent of Nitrogen (N), Phosphate (P), Potash (K) and sulphur(S).
The straight nitrogenous fertilizers produced in the country are urea, ammonium Sulphate,
calcium ammonium nitrate (CAN) and ammonium chloride. The only straight phosphatic
fertilizer being produced in Sector Report: Fertilizer Industry India / Economics the country is
SSP. The complex fertilizers include DAP, several grades of Nitro phosphates and NPK
complexes. Urea and DAP are the main fertilizers produced indigenously.
10
(a) Chart showing different types of fertilizers
The Demand-Supply scenario in fertilizers has been worked out by the Working Group on
Fertilizers for the Ninth Plan (1997-98 to 2001-02) on the basis of the estimated demand and
production projections in terms of N and P2O5 nutrients (Table-2). The increase in production
(supply) will be 4.86 million tons, most of it is confined to nitrogen resulting from the
commissioning of the expansions, new plants or joint ventures abroad. Production of N is
expected to increase from 9.7 million tons in 1997-98 to 25.0 million tons in 2007-08. The
Group estimated that the available phosphate supply will increase from 2.8 million tons of P2O5
in 1997-98 and reach 7 million tons in 2007-08. The demand for N, P2O5, K2O has also been
estimated up to 2006-2007 (terminal year of tenth plan) at 16.35, 6.65 and 2.60 million tonnes,
respectively.
11
2.5 Pricing policy:
The fertilizer policy is aimed at increasing consumption to meet the food and fiber requirement
of growing population through setting up required production capacities, ensuring that quality
fertilizers are made available to the farmers throughout the country at uniform and affordable
price. It was also recognized that fertilizer use should be profitable to the farmers for which he
must get a certain minimum return for the produce. This led to the announcement of procurement
prices and minimum support prices for several crops from 1970 onwards. The Marathe
Committee was assigned the task of resolving the issue of keeping Farm Gate Prices (FGP) of
fertilizers at an affordable level in the face of rising production/import costs. Its
recommendations in 1977 led to the birth of the Retention Price Scheme (RPS). This scheme was
intended to ensure that both the fertilizer producers as well as the farmers should find it
worthwhile to produce and use fertilizers. The policy aimed that each manufacturer is able to get
12% post-tax return on investment on efficient operation regardless of the location, age,
technology and cost of production. In addition, the government agreed to reimburse the cost of
transportation from factory gate to railhead and also take care of the distribution margin. The
RETENTION PRICE SCHEME is now restricted to urea only.
12
2.6 Fertilizer subsidy:
The RPS system helped in achieving the objective of increased indigenous availability and
supplying it to farmers on affordable and uniform price. The difference between FARM GATE
PRICES and RPS is paid to the industry as subsidy.
Production along with escalation in price of raw material and plant cost, the subsidy amount
swelled to huge proportions over the years. In an attempt to reduce the burden of subsidy, the
government has increased urea price by 10 % w.e.f February 2005. As a result, domestic urea
prices have risen from Rs3320/t (US$ 83/t) to Rs3660/t (US$ 91/t) for bagged deliveries to
farmers. The average subsidy pattern of urea is around US$ 84/t. prior to decontrol of phosphatic
and potassic fertilizers (in the year 1992) subsidy was available to all domestic and imported
fertilizers. The fertilizer subsidy increased from US$ 418 million in 1999-00 to US$ 2446
million in 2004-2005. However, the subsidy bill after the decontrol of phosphatic and potassic
fertilizer declined and remained below 1990-91 level.
13
The union budget for 2000-01 raised urea prices by 15 percent; DAP by 7 percent and that of
MOP by 15 percent. This move enabled the Government of India (GOI) to prune the subsidy bill
to some extent. However, there was no increase in urea price in the union budget for 2001-02.
In the long term policy, the subsidy withdrawal in a phased manner has been proposed. However,
modality to phase out the subsidy has not been clearly mentioned.
DAP is mainly imported from Jordan, Germany, Canada, Rumania, U.K, Japan, U.S.A, Norway,
Saudi Arabia, Philippines, Mexico, U.S.S.R and others.
DAP
YEAR
Production Imports Consumption
.
( c) Chart showing import of DAP from 1997-2008
14
2.8 Public Sector Companies in INDIAN Fertilizer Market
There are a number of public sector companies in Indian fertilizer market producing complex
fertilizers, ammonium sulphate, DAP, calcium ammonium nitrate and urea. At present, there are
nine public sector undertakings in the Indian fertilizer market and one cooperative society. These
function under the supervision of the Department of Fertilizers of India. Of the 63 large units
producing fertilizers in India, 9 units are dedicated to the production of ammonium sulphate and
38 units produce urea. There are 79 small and medium scale units dedicated to the production of
single super phosphate. The Indian industries producing fertilizers have to total capacity of 56
lakh MT of phosphatic nutrient and 121 lakh MT of nitrogen. Some of the public sector
undertakings in this sector are mentioned below:
Some of the other companies engaged in the production of fertilizers are listed below:
1. Neyveli Lignite Corporation Ltd. (NLC)
2. Hindustan Copper Limited (HCL)
3. Steel Authority of India Limited (SAIL)
15
Private Companies in Indian Fertilizer Market
A number of private companies in the Indian fertilizer market are engaged in production of the
agro-input. Most of the companies also engage in exporting fertilizers in the global market,
earning foreign capital from the business. The country stands at the third position among the
largest producers of the product in the world. India is also ranks among the highest consumers of
fertilizers. The euphoric growth in the business has also facilitated the agricultural industry of
India, which is dependent for its optimization on the fertilizer industry.
Private Companies Producing Fertilizers In INDIA
1. Paradeep Phosphates Ltd
2. Khaitan Chemicals and Fertilizers Limited
3. Mangalore Chemicals
4. Nagarjuna Fertilizers
5. Zuari Chambal
6. BEC Fertilizers
7. Gujarat State Fertilizers &Chemicals Limited
8. DSCL
Some of the other private companies engaged in the production of fertilizers in India are listed
below:
1. The Scientific Fertilizer Co Pvt Ltd
2. Coromandel Fertilizers
3. Deepak Fertilizers and Petrochemicals Corporation Limited
4. Aries AgroVet
5. Devidayal Agro Chemicals
The production of nitrogenous fertilizer in the private sector has been increasing in the past few
years. The private sector had only 13% share in the production in 1960-61. The private sector has
always retained a higher share in the production of phosphatic fertilizer production
16
Cooperative Companies Producing Fertilizer in India
17
CHAPTER-3
COMPANY PROFILE
Paradeep Phosphates Limited (PPL) is a complex fertilizer unit engaged in the production of Di-
Ammonium Phosphate (DAP)/NPK fertilizers with its plant located in the Port town of Paradeep
at a distance of 120 Km’s from the State capital, Bhubaneswar in Orissa on the East Cost of
India.
With Registered and Corporate Offices at Bhubaneswar, the Company was incorporated as a
joint venture between the Government of India and the Republic of Nauru with an investment of
Rs. 630 crores on December 24, 1981. Subsequently it became a wholly owned Government of
India Enterprise since June 1993 after withdrawal of stake by the Government of Nauru.
Later again the Government of India divested 74% of its own stake in favor of a strategic partner
– M/s. Zuari Maroc Phosphates Limited (ZMPL) effective from 28th February 2002. The ZMPL
is a (50:50) joint venture of Zuari Industries Limited (ZIL), of the K.K Birla Group and the
Maroc Phosphor S.A (A wholly owned subsidiary of the fertilizer giant OCP of Morocco). At
present ZMPL holds 80.45% of the company’s shares and rest with the Government of India.
18
3.2 Plant Capacities and Product Profile
Plant Advantages
• Navratna Brand of
Di-Ammonium Phosphate (DAP)
NPKS : 20:20:0:13
NPK : 12:32:16
NPK : 10:26:26
NPKS : 15:15:15:9
• Sulphuric Acid
Ammonia
Gypsum in Bulk and Bags
19
Port Facility
• One sophisticated ship unloader of capacity of 1000 MT/Hr solid cargo. Another automatic
ship unloader has a capacity of 600 MT/Hr. The handling system also provides for
discharging of 500 MT of liquid cargo per hour.
• 3.1 Km long pipe rack and 3.4 Km long conveyor gallery for transport of liquid and
solid cargo directly from the ship to the storage tanks and silos respectively in the
plant.
20
Storage Facilities
• Ammonia - 50,000 MT
• Phosphoric Acid - 60,000 MT
• Sulphuric Acid - 36,000 MT
• Rock Phosphate - 60,000 MT
• Sulphur - 45,000 MT
• Finished Product - 60,000 MT
• Imported Fertilizers - 25,000 MT
Bagging Plant
• Eight Stitching lines for bagging
• Three Platforms for simultaneous loading into wagons
• Additional loading facilities for trucks
• Bulk loading facilities for gypsum
• Platform for dispatch of bagged imported fertilizers & gypsum
The effluent treatment plant at PPL Plant site is one of the largest of its kind in India with a
capacity to handle approximately 200 m3/hr of effluent.
The ETP is equipped with a 2050 m3 capacity equalization basin to contain the effluent from all
the plants.
21
3.6 Environment Management
PPL is a zero effluent plant since 2002. PPL has adopted an environmental policy committed to
continuous improvement in environmental standards and protection, prevention of pollution and
conservation of resources in the plant and its surrounding areas. It has taken major steps in
achieving its environmental objectives with the help of an Effluent Treatment Plant which is one
of the largest in the Indian Fertilizer Industry. Comprehensive revamping of Sulphuric Acid and
Phosphoric Acid Plants, separation of acid and storm water drains, and construction of storage
yards, reuse of sulphur muck and a state-of-the-art Alkali Scrubber in the Sulphuric Acid Plant
are additional features .
The product quality is monitored and controlled through continuous checking of nutrients
Nitrogen, P 2 O 5 and K 2 O round the clock during production. The analysis is carried out with the
use of highly sophisticated and accurate ‘Technician Auto Analyzer’ at the Laboratory.
An employee friendly outlook is always the strength of the organization. Right from the
beginning, the management introduced a system of open communication and dialogue with the
employees. Good works done by employees and useful suggestions from them are being
rewarded through an award scheme. The focus of the organization is always to enhance the
multi-tasking ability of every employee through various training programmes . The Company
has on its role 932 qualified and competent employees consisting of 509 executives and 423 non-
executives. Of these, 809 employees have been posted at the Corporate Office & factory site and
123 in various marketing offices spread throughout the country. Frequently high production and
dispatch records have been set, testifying the diligence of a motivated employee force with
accountability.
22
3.9 Navratna Krishi Vikas
PPL develops farmers through different methods so that fertilizer consumption is increased for
fuelling agricultural growth of the Nation.
As a good business sense and a corporate social responsibility, PPL has taken up pilot projects as
part of Farm Advisory Services under the name “NAVRATNA KRISHI VIKAS” in
Nawarangpur & Nayagarh districts of Orissa and Sarguja & Rajnandgaon districts of
Chhattisgarh, to help enhancing of agricultural output of farmers and increasing their farm
income through ventures like growing Tissue Culture Bananas, Vermi Compost, Mushroom
cultivation and helping Self Help Groups in the villages etc. Two more districts viz. Dhenkanal
and Khurda have been taken up starting June 2008
These projects are located within our market areas where fertilizer consumption has been very
low. The State Government machineries have been associated with such activities and are
actively involved in these projects with a slogan of “Serving Farmers, Saving Farming”.
Various promotional and developmental activities include farmer training programmes,
demonstration of usage of hybrid seeds and balanced nutrition, soil testing campaigns, crop
diversification, dealers and retailers training programmes. For soil testing PPL has both a mobile
testing unit and laboratory facilities in the plant.
For producing DAP and Complex fertilizer of NPK, PPL manufactures its intermediate raw
materials. The main units are:
Supported with
• Bagging Plant with Railway Siding and Platform
• Silo and Storage Tanks for storing different raw materials and products
• Captive Power Plant
23
• Off-sites & Utilities
• Effluent Treatment Plant
PPL has built a modern township for its employees at Paradeep. Highlights of the township are
24
CHAPTER-4
CAPITAL BUDGETING
4.1 MEANING
Capital Budgeting is the process of making investment decisions in capital expenditure. A capital
expenditure may be defined as an expenditure the benefit of which are expected to be received
over a period of time exceeding one year.
The main characteristics of a capital expenditure are that the expenditure is incurred at one point
of time whereas benefits of the expenditure are realized at different points of time in future.
Capital expenditure involves non-flexible long term commitment of funds. Thus capital
expenditure decisions are also called Long-Term Investment Decision. Capital budgeting
involves the planning and control of capital expenditure.
DEFINITION:
R.M.LYNCH has defined capital Budgeting as “Capital Budgeting consists of
employment of available capital for the purpose of maximizing the long term profitability
of the firm”.
Capital Budgeting is a many-sided activity. It includes searching for new and more profitable
investment proposals, investigating, engineering and marketing considerations to predict the
consequences of accepting the investment and making economic analysis to determine the profit
potential of each investment proposal.
Its basic features can be summarized as follows;
1. It has the potentiality of making large anticipated profits.
2. It involves a high degree of risk.
3. It involves a relatively long-time period between the initial
outlay and the anticipated return.
Capital Budgeting consists of planning and the development of available capital for the purpose
of maximizing the long-term profitability of the firm.
25
4.2 NEED AND IMPORTANCE OF CAPITAL BUDGETING
Capital Budgeting means planning for capital assets. Capital Budgeting decisions are vital to any
organization as they include the decision to;
1. Whether or not funds should be invested in long term projects such as setting
of an industry, purchase of plant and machinery etc.,
2. Analyze the proposal for expansion or creating additional capacity.
3. To decide the replacement of permanent assets such as building and
equipments.
4. To make financial analysis of various proposal regarding capital investments
so as to choose the best out of many alternative proposals.
The importance of capital Budgeting can be well understood from the fact that an unsound
investment decision may prove to be fatal to the very existence of the concern. The need,
significance or importance of capital budgeting arises mainly due to the following.
1. Large Investments
Capital budgeting decisions, generally involves large investment of funds. But the funds
available with the firm are always limited and the demand for funds exceeds the resources.
Hence it is very important for a firm to plan and control its capital expenditure.
3. Irreversible Nature
26
The capital expenditure decisions are of irreversible nature. Once the decisions for acquiring a
permanent asset is taken, it became very difficult to dispose of these assets without incurring
heavy losses.
6. National Importance
An investment decision through taken by individual concerns is of national importance because
it determines employment, economic activities and economic growth.
9. Cost control
27
In capital budgeting there is a regular comparison of budgeted and actual expenditures. Therefore
cost control is facilitated through capital budgeting.
Capital budgeting is a complex process. It involves decision relating to the investment of current
funds for the benefit to be achieved in future which is always uncertain. Capital budgeting is a
six step process. The following steps are involved in capital budgeting;
1. Project generation
The capital budgeting process begins with generation or identification of investment proposals.
This involves a continuous search for investment opportunities which are compatible with firm’s
objectives.
2. Project screening
Each proposal is then subject to a preliminary screening process in order to assess whether it is
technically feasible, resources required are available, and expected returns are adequate to
compensate for the risks involved.
3. Project evaluation
After screening of project ideas or investment proposals the next step is to evaluate the
profitability of each proposal. This involves two steps;
a. Estimation of cost and benefit in terms of cash flows
b. Selecting an appropriate criterion to judge the desirability of the
project.
28
4. Project selection
After evaluation the next step is the selection and the approval of the best proposal. In actual
practice all capital budgeting decision are made at multiple levels and are finally approved by top
management.
After the selection of project funds are allocated for them and a capital budget is prepared. It is
the duties of the top management or capital budgeting committee to ensure that funds are spend
in accordance with allocation made in the capital budget.
6. Performance review
After the implementation of the project, its progress must be reviewed at periodical intervals.
The follow-up or review is made by comparing actual performance with the budget estimates.
Most of the large firms prepare two different budgets each year.
1. OPERATING BUDGET
Operating budget shows planned operations for the forthcoming period and includes sales,
production, production cost, and selling and distribution overhead budgets. Capital budgets deals
exclusively with major investment proposals.
Capital Expenditure is a type of functional budget. It is the firm’s formal plan for the expenditure
of money for purchase of fixed assets. The budget is prepared after taking in to account the
available production capacities, probable reallocation of existing resources and possible
29
improvements in production techniques. If required, separate budgets can be prepared for each
item of capital assets such as a building budget, a plant and machinery budget etc.
The capital expenditure budget primarily ensures that only such projects are taken in hand which
are either expected to increase or maintain the rate of return on capital employed. Each proposed
project is appraised and only essential project or projects likely to increase the profitability of the
organization are included in the budget. In order to control expenditure on each project, the
following procedure is adopted.
1. A project sheet is maintained for each project.
2. In order to ensure that the expenditure on different project is properly analyzed.
3. The expenditure incurred on the project is regularly entered on the project sheets from
various sources such as invoices of assets purchased, bill for delivery charges etc.,
4. The management is periodically informed about expenditure incurred in respect of
each project under appropriate heads.
5. In case project cost is expected to increase; a supplementary sanction for the same is
obtained.
6. In financial books the total expenditure incurred on all projects is separately recorded.
30
4.6 TACTICAL AND STRATEGIC INVESTMENT DECISION
1. Tactical Decision
A Tactical Decision generally involves a relatively small amount of funds and does not constitute
a major departure from the past practices of the company.
2. Strategic Decision
A Strategic Investment Decision involves a large sum of money and may also result in a major
departure from the past practices of the company. Acceptance of a Strategic Investment Decision
involves a significant change in the company’s expected profits associated with a high degree of
risk.
Efficiency is the rationale underlying all capital decisions. A firm has to continuously invest in
new plant or machinery for expansion of its operations or replace worn-out machinery for
maintaining and improving its efficiency. The overall objective is to maximize the firm’s profits
and thus optimizing the return on investment. This objective can be achieved either by increased
revenues or by cost reduction. Thus capital expenditure can be of two types;
A firm may have several investment proposals for its consideration. It may adopt one of them,
some of them or all of them depending upon whether they are independent, contingent or
dependent or mutually exclusive.
31
1. INDEPENDENT PROPOSALS
These are proposals which do not compete with one another in a way that acceptance of one
precludes the possibility of acceptance of another. In case of such proposals the firm may straight
away “accept or reject” a proposals on the basis of minimum return on investment required. All
these proposals which give a higher return than a certain desired rate of return are accepted and
the rest are rejected.
These are proposals whose acceptance depends on the acceptance of one or more other
proposals. When a contingent investment proposal is made, it should also contain the proposal on
which it is dependent in order to have a better perspective of the situation.
These proposals which compete with each other in a way that the acceptance of one precludes
the acceptance of other or others. Two or more mutually exclusive proposals cannot both or all
be accepted. Some techniques have to be used for selecting the better or the best one. Once this is
done, other alternative automatically gets eliminated.
4. REPLACEMENT PROPOSALS
These aim at improving operating efficiency and reducing costs. These are called cost reduction
decisions.
5. EXPANSION PROPOSALS
32
6. DIVERSIFICATION PROPOSALS
Diversification means operating in several markets rather than a single market. It may also
involve adding new products to the existing products. Diversification decisions require
evaluation of proposals to diversify in to new product lines, new markets etc., for reducing the
risk of failure.
Capital rationing means distribution of capital in favor of some acceptable proposals. A firm
cannot afford to undertake all profitable proposals because it has limited funds to invest. In such
a case, these various investment proposals compete for limited funds and the firm has to ration
them. Thus the situation where the firm is not able to finance all the profitable investment
opportunities due to limited resources is known as capital rationing.
4.9 FACTORS AFFECTING CAPITAL INVESTMENT DECISIONS
The following are the four important factors which are generally taken in to account while
making a capital investment decision.
The management expects a minimum rate of return on the capital investment. The minimum rate
of return is usually decided on the basis of the cost of capital.
33
Capital investment decisions are made in anticipation of increased return in the future. It is
therefore necessary to estimate the future return or benefits accruing from the investment
proposals while evaluating the capital investment proposals.
When a number of projects appear to be acceptable on the basis of their profitability the project
will be ranked in the order of their profitability in order to determine the most profitable project.
A business firm has a number of proposals regarding various projects in which it can invest
funds. But the funds available with the firm are always limited and it is not possible to invest
funds in all the proposals at a time. The most widely accepted techniques used in estimating the
cost returns of investment projects can be grouped under two categories;
1. TRADITIONAL METHODS (NON DISCOUNTED CASH FLOW)
a. Payback Period Method
b. Average rate of Return Method
The payback period method is the simplest method of evaluating investment proposals. Payback
period represents the number of years required to recover the original investment. The payback
period is also called Pay Out or Pay off Period. This period is calculated by dividing the cost of
34
the project by the annual earnings after tax but before depreciation. Under this method the
project is ranked on the basis of the length of the payback period. A project with the shortest
payback period will be given the highest rank.
METHODS OF COMPUTATION OF PAYBACK PERIOD
Annual cash inflow is the annual earning (profit depreciation and after taxes) before
DISADVANTAGES
1. This method does not take in to consideration the cash inflows beyond
the payback period.
2. It does not take in to consideration the time value of money. It considers
the same amount received in the second year and third year as equal.
3. It gives over emphasis for liquidity.
35
ACCEPTANCE RULE
The following are the Payback [P.B.Rules]
Accept P.B<cut-off rate
Reject P.B>cut-off rate
May Accept P.B<cut-off rate
Cut-off rate
Cut-off rate is the rate below which a project would not be accepted. If ten percentage is the
desired rate of return, the cut-off rate is 10%.The cut-off point may also be in terms of period. If
the management desires that the investment in the project should be recouped in three years, the
period of three years would be taken as the cut-off period. A project incapable of generating
necessary cash to pay for the initial investment in the project with-in three years will not be
accepted.
This method otherwise called the Rate of Return Method, takes in to account the earnings
expected from the investment over the entire life time of the asset. The various projects are
ranked in order of the rate of returns. The project with the higher rate of return is accepted.
Average Rate of Return is found out by dividing the average income after depreciation and taxes,
i.e. the accounting profit, by the Average Investment.
Where;
Average Annual Earnings is the total of anticipated annual earnings after depreciation and tax
(accounting profit) divided by the number of years.
36
Average Investment means
DISADVANTAGES
1. Like the payback period method this method also ignores the time value of money.
The averaging technique gives equal weight to profits occurring at different periods.
2. This averaging technique ignores the fluctuations in profits of various years.
37
3. It makes use of the accounting profits, not cash flows, in evaluating the project.
The payback period method and the Average rate of Return Method do not take in to
consideration the time value of money. They give equal weight to the present and the future flow
of incomes. The discounted cash flow methods are based on the concept that a rupee earned
today is more worth than a rupee earned tomorrow. These methods take in to consideration the
profitability and also the time value of money.
The Net Present Value Method (NPV) gives consideration to the time value of money. It views
that the cash flows of different years differ in value and they become comparable only when the
present equivalent values of these cash flows of different periods are ascertained. For this the net
cash inflows of various periods are discounted using the required rate of return, which is a
predetermined rate .If the present value of expected cash inflows exceeds the initial cost of the
project, the project is accepted.
NPV = Present value of cash inflows-Present value of initial investment
38
5. If the net present value is negative i.e., the present value cash outflow is more than
the present value of cash inflow the project proposals will be rejected .If net present
value is zero or positive the proposal can be accepted.
6. If the projects are ranked the project with the maximum positive net present value
should be chosen.
39
II. INTERNAL RATE OF RETURN (IRR) METHOD
The Internal Rate of Return for an investment proposal is that discount rate which equates the
present value of cash inflows with the present value of cash outflows of the investment. The
Internal Rate of Return is compared with a required rate of return. If the Internal Rate of Return
of the investment proposal is more than the required rate of return the project is rejected. If more
than one project is proposed, the one which gives the highest internal rate must be accepted.
It can be calculated by the following formula
P1-Q
IRR = L+ xD
P1-P2
Where,
L = Lower rate of discount
P1 = Present value of cash inflows at lower rate of discount
P2 = Present value at higher discount rate
Q = Initial Investment
D = Difference in rate
DISADVANTAGES
1. Difficult to calculate.
2. This method presumes that the earnings are reinvested at the rate earned by the
investment which is not always true.
40
Accept or Reject Rule
Internal Rate of Return is the maximum rate of interest which an organization can afford to pay
on the capital invested in a project. A project would qualify to be accepted if Internal Rate of
Return exceeds the cut-off rate. While evaluating two or more projects, a project giving a higher
Internal Rate of Return would be preferred. This is because higher the rate of return, the more
profitable is the investment.
III. PROFITABILITY INDEX METHOD
This is also called Benefit-Cost ratio. This is slight modification of the Net Present Value
Method. The present value of cash inflows and cash outflows are calculated as under the NPV
method. The Profitability Index is the ratio of the present value of future cash inflow to the
present value of the cash outflow, i.e., initial cost of the project.
If the Profitability index is equal to or more than one proposal the proposal will be accepted. If
there are more than one investment proposals, the one with the highest profitability index will be
preferred.
This method is also known as Benefit-Cost ratio because the numerator measures benefits and
the denominator measures costs. ”It is the ratio of the present value of cash inflow at the required
rate of return to the initial cash outflow of the investment.
41
4.11 Cost Effective Analysis
In the cost effectiveness analysis the project selection or technological choice, only the costs of
two or more alternative choices are considered treating the benefits as identical. This approach is
used when the acquisition of how to minimize the costs for undertaking an activity at a given
discount rates in case the benefits and operating costs are given, one can minimize the capital
cost to obtain given discount.
The planning of a project is a technically pre- determined set of inter related activities involving
the effective use of given material, human, technological and financial resources over a given
period of time. Which in association with other development projects result in the achievement
of certain predetermined objectives such as the production of specified goods & services?
Project planning is spread over a period of time and is not a one shot activity. The important
stages in the life of a project are:
1. It’s Identification
2. It’s initial formulation
3. It’s evaluation (Whether to select or to project)
4. It’s final formulation
5. It’s implementation
6. It’s completion and operation
The time taken for the entire process is the gestation period of the project. The process of
identification of a project begins when we are seriously trying to overcome certain problems.
They may be non- utilization to overcome available funds. Plant capacity, expansion etc
42
Contents of the project report:
1. Cost of land
2. Cost of Building
3. Cost of plant and machinery
4. Engineering know how fee
5. Expenses on training Erection supervision
6. Miscellaneous fixed assets
7. Preliminary expenses
8. Pre-operative expenses
9. Provision for contingencies \
43
4.13 RISK AND UNCERTAINITY IN CAPITAL BUDGETING
All the techniques of capital budgeting requires the estimation of future cash inflow and cash
outflows. The cash flows are estimated abased on the following factors.
• Production cost.
• Depreciation.
• Rate of Taxation
But due to uncertainties about the future the estimates of demand, production, sales costs, selling
price, etc cannot be exact, for example a product may become obsolete much earlier than
anticipated due to un expected technological developments all these elements of uncertainties
have to be take into account in the form of forcible risk while making an investment decision.
But some allowances for the element of risk have to be proved.
44
4.14 FACTORS INFLUENCING CAPITAL EXPENDITURE
DESCISIONS:
There are many factors financial as well as non financial which influence the capital expenditure
decisions and the profitability of the proposal yet, there are many other factors which have to be
taken into consideration while taking a capital expenditure decisions. They are
1. URGENCY
Sometime an investment is to be made due to urgency for the survival of the firm or to avoid
heavy losses. In such circumstances, proper evaluation cannot be made though profitability tests.
Examples of each urgency are breakdown of some plant and machinery fire accidents etc.
2. DEGREE OF UNCERTAINTY
Profitability is directly related to risk, higher the profits, greater is the risk or uncertainty.
INTANGIBLE FACTORS
Sometimes, a capital expenditure has to be made due to certain emotional and intangible factors
such as safety and welfare of the workers, prestigious projects, social welfare, goodwill of the
firm etc.
1. AVAILABILITY OF FUNDS
As the capital expenditure generally requires the previsions of laws solely influence by this
factor and although the project may not be profitable. Yet the investment has to be made.
45
2. FUTURE EARNINGS
A project may not be profitable as competed to another today, but it may be profited to increase
future earnings.
Sometimes project with some lower profitability may be selected due to constant flow of income
as compared to another project with an irregular and uncertain inflow of income.
• To make an estimate of capital expenditure and to see that the total cash outlay is
within the financial resources of the enterprise
• To ensure timely cash inflows for the projects so that no availability of cash may
not be problem in the implementation of the problem.
• To ensure that all capital expenditure is properly sanctioned.
• To properly coordinate the projects of various departments
• To fix priorities among various projects and ensure their follow-up.
• To compare periodically actual expenditure with the budgeted ones so as to avoid
any excess expenditure.
• To measure the performance of the project.
• To ensure that sufficient amount of capital expenditure is incurred to keep pace
with rapid technological development.
• To prevent over expansion.
46
4.17 STEPS INVOLVED IN CONTROL OF CAPITAL EXPENDITURE
• Evaluation of performance.
LEASE FINANCING
Lease finance is an agreement for the use of an asset for a specified rental. The owner of the
asset is called the lesser and the user the lesser
1) Operating leases
2) Financial leases
Operating leases are short-term no-cancel able leases where the risk of obsolescence in borne by
the lesser
Financial leases are long-term non-cancelable leases where any risk in the use of asset is borne
by the lessee and he enjoys the return too.
• Preliminary budget estimates for the year following the budget year.
47
GENERAL GUIDELINES:-
2) New schemes
4) Township
6) EDP schemes
CONTINUING SCHEMES
These schemes include all such schemes which are under implementation of which funds
prevision has been made in the current year /prevision is required in the budget year.
NEW SCHEMES
This scheme includes all such schemes, which are proposed to be initiated in the budget year and
for which under provisions is required in the budget year. Normally, such schemes are included
in the five-year plan of the company approved by the planning commission.
This includes item of plant and machinery etc for which funds required in the budget year and
the following year. All item included in M&R should result in cost reduction/quality
improvement/rebottle necking/replacement/productivity, improvement and welfare. The M&R
items are to be submitted in the following main characteristics accompanied with full
justification on the agenda of facilities increased output and production, quality requirements
bottlenecks.
48
1. Replacement / modernization.
2. Balancing facilities (essentially to increase production).
3. Operational requirements including material handling
4. Quality/testing facilities.
5. Welfare
6. Minor works.
These requirements should be protested term wise. A separate proposal is required for M&R
items costing more than Rs. 10, 00,000.
TOWNSHIP
• Township budget is divided into two parts.
Funds required under each schemes should be backed up with full data on number on
quarter/scope of work to be completed against the funds requirements phasing of budgeted funds
for current year, budget year and following year etc, should be given similar information on
number of quarter/scope of work already completed, expenditure incurred till last year,
satisfaction level it is to be added in the above back up information for each scheme.
• Continuing schemes.
The schemes should fall in any of the above cartages giving details on physical and financial
progress etc.
49
EDP SCHEMES
All funds requirements for computer are information system should be grouped under EDP
schemes and projects accordingly.
BUYING OR PROCURING
Buying or procurement involves purchasing an asset permanently in the form of cash or credit.
LEASING V S BUYING
Leasing equipment has the tax advantage of depreciation, which can mutually benefit the lesser
and lessee, other advantage of leasing, include convenience and flexibility as well as specialized
services to the lessee. Lease privies handy to those linens, which cannot obtain loan capital form
normal sources.
The pros and cons of leasing and buying are to be examined thoroughly before deciding the
method of procurement i.e. leasing or buying.
50
CHAPTER-5
FINANCING OF PROJECT
Project financing is considered right from the time of the conception of the project. The proposal
of the project progress working capital, so, in general a project is considered as a ‘mini firm’ is a
part and parcel of the organization.
Loan Financing
Security Financing
Internal Financing
Loan Financing:
(a). Short- Term Loans & Credits
Short – Term Loans & Credits are raised by a firm for meeting its working capital requirements.
These are generally for a short period not exceeding the accounting period i.e., one – year.
51
(b). Term Loans:
Term loans are given by the financial institutions and banks, which form the primary source of
long term debt for both private as well as the Government organizations. Term loans are
generally employed to finance the acquisition of fixed assets that are generally repayable in less
than 10 years. In addition to short- term loans, company will raise medium term and long term
loans.
i) Equity Capital:
Equity Capital is also known as owner’s capital in a firm. The holders of these shares are the real
owners of the company. They have a control over the working of the company. Different ways to
raise the equity capital.
o Initial public offering.
o Seasoned offering
o Rights issue.
o Private placement
o Preferential allotment.
52
ii) Preference Capital:
Debentures:
Debentures are an alternative to the term loans and are instruments for raising the debt finance.
Debenture holders are the creditors of a company and the company and the company have the
obligations to pay the interest and principal at specified times. Debentures provide more
flexibility, with respect to maturity, interest rate, security and repayment Debentures may be
fixed rate of interest or floating rate or may be zero rates. Debentures & Ownership Securities
help the management of the company to reduce the cost of capital.
A new company can raise finance only through external sources such as shares, debentures, loans
and public deposits. For existing company they need to raise funds through internal source. Such
as retained earnings depreciation as a source of funds. Some other innovative source of finance
♦ Venture Capital
♦ Seed Capital
♦ Bridge Finance
♦ Lease Financing
♦ Euro- Issues
53
CHAPTER-6
INTRODUCTION TO FINANCE AND ACCOUNTS DEPARTMENT
Finance is the lifeblood of the business .According to Howard and Upton “Finance is that
administrative area or set of administrative function in organizations which relate with the
arrangements of cash and credit so that the organization may have the means to carry out of its
objective as possible.”
54
6.2 FINANCE DEPARTMENT COMPRISES OF
Pay roll section takes care of all the financial issues of employees in co-ordination with
Administrative & Personnel Department. Its functions includes management of salaries, TA/DA,
loans & advances, misc payment related to employees, Perk/There allowance payments etc. Here
records of each employee are maintained regarding basic pay, leave encashment, medical, salary,
increments, promotion based perks, etc.
RAW MATERIALS
Different types of Raw Materials that are required at PPL, PARADEEP Unit are as follows :
1. Sulphuric Acid
2. Phosphoric Acid
3. Ammonia
4. Potash
5. MAP
6. Urea
7. Filler
Raw Material section in F & A department does the accounting of above mentioned raw-material
which includes receipt of raw- material are purchased, monthly consumption as per the
production department and payment to the suppliers.
55
MISCELLANEOUS ACCOUNTS
Miscellaneous bills includes rates contracts for service contract for air conditioner, water coolers,
weighing machines, franking machines, knitting of chairs, etc. Others miscellaneous bills
includes telephone rentals, STD calls, local calls, teleprinters , fax, service bills, advertisement
bills, electricity bills, printing and block making bills, bills of travel agents, bills of canteen
purchases, etc. Annual Contracts and Hiring of taxi, motors, etc. is also included in this.
WORKS BILLS
Work bills section is entrusted with the task of checking and authentication of APF received
from various departments such as Civil, Plant, and Township etc. They have to keep record and
maintain account. They have to verify with respect to measurements, Tax provisions like TDS
and other deductions like EMD, Security and penalty etc.
PURCHASE BILLS
In purchase bill, treatment is given to the bills on purchase of machinery and tools and spares etc.
for accounting requirements and book keeping as well as record maintenance and tax deductions
and authentication of AFP on purchase of Goods and Services.
56
FINANCIAL CONCURRENCE
Financial concurrence deals with crosschecking and green signaling the requisition for purchases
made by various indent departments of the unit. They check for the availability of budget and
ascertain its necessity and critically for regular and smooth operations of the plants and activities
of various departments.
Books and budget deal with revenue budget compilation, monitoring and control, reconciliation
of inter unit accounts, maintenance of books of accounts and submission of monthly / quarterly /
annual reports, COP processing and attending internal / statutory / tax auditors.
57
CHAPTER-7
DATA ANALYSIS AND INTERPRETATION
% Capacity
utilization 182 178 142 168 167
58
7.3 Balance Sheet (2006-2007 to 2010-2011)
(In lacs)
Particulars 06-07 07-08 08-09 09-10 10-11
Sources of Funds:
Auth share capital 100000 100000 100000 100000 100000
Paid up capital 57545 57545 57545 57545 57545
Reserve and surplus --- --- --- 10791 28500
Secured loan 13619 2785 85072 104307 113987
Current Assets
59
7.4 Profit and Loss Statement(2006-2011)
(In Lacs)
Working results 06-07 07-08 08-09 09-10 10-11
Sales 119793 120663 94368 119831 128297
Subsidy 86276 124527 417077 178583 222170
Other Income 652 3487 49530 18153 12597
Total 206721 248677 560975 316927 363064
Cost Of Sales(including prior period
adj but excluding Dep and Interest)
187719 230047 484485 288612 327032
Gross Margin (19002) (18630) (76490) (28315) (36032)
Depreciation 3402 3817 3347 3048 2470
Profit/(loss) before Int and Taxes 15600 14813 73143 25267 33562
60
CHAPTER-8
EVALUATION OF PROJECT USING CAPITAL BUDGETING
TECHNIQUES
Project Estimate: Ventured into the market and got a quote for 300 Cr.
Assumption: The Company has currently a dispatch mechanism which is mechanized for
dispatching or bagging 3,300 MT/day. The company plans to increase its production level to 16,
00,000 MT/annum. So, the dispatch system should be increased to an additional 1,550 Mt/day so
that the total dispatching to be done per day goes up to 4,850Mt/day. So, as to ensure the smooth
functioning of the dispatching system and this can be done by setting up a new baggaging
plant…
Present Capacity-3,330MT/day
New Capacity - 4,850MT/day
Difference or excess production - (4850-3300)MT/day=1,550MT/day
The first and the foremost step in the evaluation of a project is the budget estimate of the project.
And here the estimate of the project is 300 crores.
This includes:-
1. Extension of Bagging Plant.
2. Conveyor System for extended portion of Bagging plant.
3. Shed for covering extended Bagging Plant.
4. Railway siding modification.
5. Shed for covering extended portion of Bagging plant.
61
STEP2: Project Finance and Source of Funds:
The second step in the evaluation of the project is to find the funds to install or to establish a
project.
In this project we have funding of 75% from a bank at 11% rate of interest P.a. providing with
long term loans and the rest 25% from Internal generation. With a moratorium of one year and
repayment schedule of 5 years.
62
Step4: Repayment Schedule of the Long Term Loan (LTL):
The fourth step in the evaluation of the project is preparing the repayment schedule of the Long
Term Loan (LTL). And here the project repayment schedule is.
REPAYMENT SCHEDULE OF LONG-TERM LOAN
11% (Rs in Crores)
63
(Rs in
REPAYMENT OF LONG TERM LOAN(LTL) crores)
2012-13 2013-14 2014-15 2015-16 2016-17 2017-18 2018-19
Interest Repaid 6.88 32.90 29.15 22.55 15.95 9.35 2.85
Principal Repaid 0 12.5 60.00 60.00 60.00 60.00 47.50
Total 6.88 45.40 89.15 82.55 75.95 69.35 50.35
In terms of cost of
Cost Elements Asset p.a
Interest on Loan 11% Tax 32.445%
Depreciation as Per
Insurance 2% IT Act 15%
Salary and Wages 3%
Contract Labour 2%
Repairs and Maintenance 3%
Chemicals 5%
Packing cost 0.50%
Power, Fuel and Water 5%
Depreciation 5.25%
64
(Rs in
PROFITABILITY STATEMENT OF THE PROJECT Crores)
2015-16 2016-17 2017-18 2018-19 2019-20
Incremental Sales 1534.50 1534.50 1534.50 1534.50 1534.50
EXPENDITURE
Raw Materials 1227.60 1227.60 1227.60 1227.60 1227.60
Interest On Loan 13.75 22.55 15.95 9.35 2.85
Insurance 7.10 7.10 7.10 7.10 7.10
Salary and Wages 10.66 10.66 10.66 10.66 10.66
Contract labor 7.10 7.10 7.10 7.10 7.10
Repairs and maintenance 10.66 10.66 10.66 10.66 10.66
Chemicals 17.76 17.76 17.76 17.76 17.76
Packaging Cost 1.78 1.78 1.78 1.78 1.78
Power, Fuel and Water 17.76 17.76 17.76 17.76 17.76
Computation of tax:
COMPUTATION OF TAX
2015-16 2016-17 2017-18 2018-19 2019-20
Profit Before Tax(PBT) 201.69 192.89 199.49 206.09 212.59
65
STEP6: Valuation of the Asset:
The sixth step in the evaluation of the project is the valuation of the project at different times or
at different periods at different years to come in the future.
The seventh step in the evaluation of the project is the preparation of the Cash Flow Statement.
And we need the cash flows to find out the Payback Period and the Internal Rate of Return of the
project
Cash In Flow
Incremental Profit After Tax 140.93 134.55 139.33 144.11 148.82
66
Step8: To Find the Viability of the Project by Using Different Techniques Of
Capital Budgeting:
It was estimated that the cash in-flows will start from 2015-2016
67
(a) Cash Outlay : 355.18 Cr
= 2.2 years
It is assumed that the profit earning of the project will start from 2015-2016.
We should increase this period with same exception as there may be any additional factor and
other cause so rounding of 2.2 to 3 years will be right, so that it will give more assistance to the
calculation.
Suggestion: Any project which has a pay-back period of 3 to 5 years is considered as a good
project…
And here we have got a pay-back period of 2.2 years. So, the project can be considered
68
2. Evaluation of the Project Using Internal Rate of Return Method:
It was estimated that the cash in-flows will start from 2015-2016
Cost of the Project- 355.18 Cr
Present Values of
Sl. No Years Cash Inflows DCF (24%) Inflows
1 2015-16 140.93 .806 113.58
69
Discount rate taken as 26% (in crores)
Present Values of
Sl. No Years Cash Inflows DCF (26%) Inflows
1 2015-16 140.93 .787 110.91
70
Discount rate taken as 28% (in crores)
Present Values of
Sl. No Years Cash Inflows DCF (28%) Inflows
1 2015-16 140.93 .781 110.06
71
Calculation of Internal Rate of Return
A-B
(355.18-349.123) + (366.412- X 2
355.18)
= 26 + 6.07 X 2
6.07+11.232
= 26 + 0.350 X 2
= 26.70
In this calculation, is done on the basis of trail and errors. By taking various percentage of
(DCF).So that an appropriate percentage of Internal Rate of Return can be judge out.
Suggestion:
Any project which has an Internal Rate of Return Between 16% to 20% is considered as a good
project…
And here for this project the Internal Rate of Return is 26.70%. So, the project can be
considered.
72
CHAPTER-9
FINDINGS AND SUGGESTIONS
9.1 FINDINGS:
1 It was found that the payback Period of the project is 2 year and 2 months.
2 The Payback Period shows that the initial investment can be recovered within a short
period of time.
3 The investment is ideal because normally an investment should be recoverable within 5
years.
4. The Internal Rate of Return shows 26.70 % This also ensures a profitable investment.
9.2 SUGGESTIONS:
1. The company may fix the time period for the capital asset for replacement.
2. The company may effectively use the available resources for attaining maximum profit.
3. The company has to analyze the proposal for expansion or creating additional capacity.
4. The company may plan and control its capital expenditure.
5. The company has to ensure that the funds must be invested in long term project or not.
6. The company may evaluate the estimation of cost and benefit in terms of cash flows.
73
BIBLIOGRAPHY:
Web Sites:
URL: http://www.Paradeepphosphates.com
URL: http://www.google.com
URL: http://www.Wikipedia.com
74
1. Which of the following is NOT a capital budgeting technique?
A) Net Present Value (NPV)
B) Internal Rate of Return (IRR)
C) Return on Investment (ROI)
D) Payback Period
2. What does the Net Present Value (NPV) method consider when evaluating projects?
A) The total cash inflows of the project
B) The time value of money
C) The accounting profits of the project
D) The payback period of the project
3. In capital budgeting, which discount rate is used in the Net Present Value (NPV) method?
A) The project's cost of capital
B) The risk-free rate of return
C) The market interest rate
D) The inflation rate
5. Which of the following statements is true regarding the payback period method?
A) It considers the time value of money.
B) It is commonly used in complex investment evaluations.
C) It ignores cash flows after the payback period.
D) It is not suitable for comparing projects of different sizes.
75
6. What is the main drawback of using the payback period method?
A) It is difficult to calculate.
B) It ignores the time value of money.
C) It requires estimation of discount rates.
D) It is not based on cash flows.
7. Which capital budgeting technique may result in multiple IRRs for some projects?
A) Net Present Value (NPV)
B) Internal Rate of Return (IRR)
C) Payback Period
D) Profitability Index (PI)
8. Which of the following capital budgeting techniques is based on accounting profits rather than
cash flows?
A) Net Present Value (NPV)
B) Internal Rate of Return (IRR)
C) Payback Period
D) Accounting Rate of Return (ARR)
9. What is the discount rate used in the Profitability Index (PI) method?
A) The project's cost of capital
B) The risk-free rate of return
C) The market interest rate
D) The average accounting return
10. Which of the following is a limitation of the Profitability Index (PI) method?
A) It ignores the time value of money.
B) It is difficult to calculate.
C) It does not consider all cash flows.
D) It may not rank mutually exclusive projects correctly.
76
11. Which capital budgeting technique accounts for the riskiness of future cash flows?
A) Net Present Value (NPV)
B) Internal Rate of Return (IRR)
C) Payback Period
D) Modified Internal Rate of Return (MIRR)
12. Which of the following statements about the Modified Internal Rate of Return (MIRR) method is
true?
A) It assumes reinvestment at the project's cost of capital.
B) It is similar to the traditional IRR method.
C) It does not consider the timing of cash flows.
D) It always results in a single rate of return.
13. Which capital budgeting technique is most suitable for evaluating projects with unconventional
cash flow patterns?
A) Net Present Value (NPV)
B) Internal Rate of Return (IRR)
C) Payback Period
D) Profitability Index (PI)
14. Which of the following statements about the NPV profile is true?
A) It plots the NPV of a project against different discount rates.
B) It only considers positive cash flows.
C) It is not useful in evaluating mutually exclusive projects.
D) It assumes a constant discount rate.
15. In capital budgeting, which method(s) consider(s) all relevant cash flows of a project?
A) Net Present Value (NPV)
B) Internal Rate of Return (IRR)
C) Both NPV and IRR
D) Payback Period
77
16. Which capital budgeting technique is most sensitive to changes in the discount rate?
A) Net Present Value (NPV)
B) Internal Rate of Return (IRR)
C) Payback Period
D) Accounting Rate of Return (ARR)
17. Which of the following capital budgeting techniques is NOT affected by the timing of cash
flows?
A) Net Present Value (NPV)
B) Internal Rate of Return (IRR)
C) Payback Period
D) Profitability Index (PI)
18. Which capital budgeting technique adjusts for the reinvestment rate assumption of the Internal
Rate of Return (IRR) method?
A) Net Present Value (NPV)
B) Payback Period
C) Profitability Index (PI)
D) Modified Internal Rate of Return (MIRR)
19. Which of the following statements about mutually exclusive projects is true?
A) They share the same initial investment.
B) Only one project can be accepted among them.
C) They have the same cash flows over their lifetimes.
D) Their profitability index is always the same.
20. Which of the following factors should NOT be considered when evaluating capital budgeting
projects?
A) Expected inflation rate
B) Economic conditions
C) Managerial preferences
D) Historical accounting data
78