Scribd
Upload
473 views9 pages

Inspection 05

This document describes the process for inspection type 05, which is used for goods receipt after rework. The key steps are: 1) Activate inspection type 05 for materials with movement type 531 after rework order confirmation. 2) Create a rework order using transaction CO07. 3) Generate operations and enter the reworked material number. 4) Confirm the production order using transaction CO11N. 5) An inspection lot will be generated in transaction QA32 for the reworked material, to which the inspection plan and sampling procedure are assigned before result recording, usage decision, and stock posting.

Uploaded by

Yusra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
473 views9 pages

Inspection 05

This document describes the process for inspection type 05, which is used for goods receipt after rework. The key steps are: 1) Activate inspection type 05 for materials with movement type 531 after rework order confirmation. 2) Create a rework order using transaction CO07. 3) Generate operations and enter the reworked material number. 4) Confirm the production order using transaction CO11N. 5) An inspection lot will be generated in transaction QA32 for the reworked material, to which the inspection plan and sampling procedure are assigned before result recording, usage decision, and stock posting.

Uploaded by

Yusra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Inspection Type 05

Creation of master data in QM

Creation of MIC’S by QS21 (MANDATORY)

Creation of Inspection method QS31


(OPTIONAL)

Creation of Sampling Procedure QDV1


(OPTIONAL)

Creation of Code group QS41 (Applicable to


Qualitative MIC (Mandatory)

Creation of selected set QS51 (Applicable to


Qualitative MIC (Mandatory)

Creation of inspection plan QP01


(Mandatory)

Activation of QM View MM02/MM01


(Mandatory)

Selection of inspection type 05(Mandatory)

Production order Rework creation (CO07)

1
Production order confirmation (CO11N)

Inspection lot generation (QA32) (Stock in


quality inspection)

Assignment of inspection plan/task list and


sampling procedure to inspection lot

Result recording

Usage decision

Stock posting in unrestricted use, blocked


stock, scrap stock

INSPECTION TYPE 05 (Inspection for Other Goods Receipt)-This inspection type is used
for other types of goods receipt. In our case, we will use for rework order
(CO07).Activate inspection type for material which is regenerated (material having 531
movement), for that material (531 movement), inspection lot will generate, after rework
order confirmation.

2
15.1 Activating Inspection Type 05

1. Activate inspection type 05 (inspection for other goods receipt) for material
which is having Movement Type 531 after rework order confirmation.

3
1. Create rework order as by regular process by CO07

4
1. Click on generate operation

1. In the component overview ,enter material no which is generated(531 movement)


(follow as is process) and save the production order

5
1. Do the confirmation by co11n

6
1. Do the confirmation by co11n

1. Go to QA32, Check for inspection lot no for inspection type 05

Similarly follow the same process like inspection type 04 afterwards


1) Assignment of inspection plan and sampling procedure
2) Result recording
3) Usage decision
4) Stock posting

7
8
9

You might also like