GK982 VoIP TA

User Manual

GK982

VoIP Terminal Adapter

User Manual

1
 GK982 VoIP TA
User Manual

1 Introduction......................................................................................................................................3
1.1 Hardware Overview..............................................................................................................3
1.2 Software Overview................................................................................................................3
2 IVR Interface for The TA...................................................................................................................4
3 Setup the TA by Web Browser.........................................................................................................4
3.1 Login.....................................................................................................................................5
3.2 System Information...............................................................................................................5
3.3 Phone Book..........................................................................................................................5
3.4 Phone Settings......................................................................................................................6
3.5 Network...............................................................................................................................11
3.6 SIP Settings........................................................................................................................14
3.7 NAT Trans...........................................................................................................................18
3.8 Others.................................................................................................................................18
3.9 System Auth........................................................................................................................19
3.10 Save Change......................................................................................................................20
3.11 Update................................................................................................................................20
3.12 Reboot................................................................................................................................21
4 Setup the TA by using Console (Hyper Terminal)..........................................................................21
4.1 Configuration.......................................................................................................................22
4.2 Using CLI command to configure the TA............................................................................22
5 How to make a phone call..............................................................................................................28
5.1 Dial a PSTN Phone call......................................................................................................28
5.2 Dial a IP Phone call.............................................................................................................28
6 Get a FWD account........................................................................................................................28

2
 GK982 VoIP TA
User Manual

1 Introduction

This user’s manual is for GK982 VoIP terminal adapter (TA). This user’s manual will explain the IVR
instruction, web configuration and command line configuration for the TA. Before using the TA, some setup
processes are required to make the TA work properly.

1.1 Hardware Overview

The TA has Networking interfaces, telephone interfaces, LED indication, power connector and Reset
button.
1.1.1 Two RJ-45 Networking interfaces, these two interfaces support 10/100Mps Fast Ethernet. you can
connect one RJ-45 Fast Ethernet port to the ADSL or Switch, and connect the other one to your
computer.
1.1.2 Two RJ-11 Type analog telephone jack interfaces. Phone port is for user to connect to a phone set and
PSTN port is for user to connect to the PSTN Line.
1.1.3 LED Indication: There are five LED indicators in the TA to show the Power, network, and Off-Hook
indication.
1.1.4 Reset Button: Press Reset button for longer than 5 seconds to make the TA restore factory default
settings and reboot. If TA works improperly, please make an attempt to Reset and then configure again.

1.2 Software Overview

Network Protocol Tone

 SIP v1 (RFC2543), v2(RFC3261)  Ring Tone

 IP/TCP/UDP/RTP/RTCP  Ring Back Tone

 IP/ICMP/ARP/RARP/SNTP  Dial Tone

 TFTP Client/DHCP Client/ PPPoE Client  Busy Tone

 Telnet/HTTP Server  Programming Tone

 DNS Client
Phone Function
 NAT/DHCP Server

Codec  Volume Adjustment

 Speed dial key

 G.711: 64k bit/s (PCM)
 Phone book
 G.723.1: 6.3k / 5.3k bit/s
 Flash
 G.726: 16k / 24k / 32k / 40k bit/s (ADPCM)
IP Assignment
 G.729A: 8k bit/s (CS-ACELP)

 G.729B: adds VAD & CNG to G.729  Static IP

 DHCP
Voice Quality
 PPPoE

 VAD: Voice activity detection Security

3
 GK982 VoIP TA
User Manual

 CNG: Comfortable noise generator  HTTP 1.1 basic/digest authentication for Web setup

 LEC: Line echo canceller  MD5 for SIP authentication (RFC2069/ RFC 2617)

 Packet Loss Compensation QoS

 Adaptive Jitter Buffer

Call Function  ToS field

 Call Hold NAT Traversal

 Call Waiting
 STUN
 Call Forward

 Caller ID Configuration

 3-way conference

DTMF Function  Web Browser

 In-Band DTMF  Console/Telnet

 Out-of Band DTMF  IVR/Keypad

 SIP Info Firmware Upgrade

SIP Server

 Registrar Server (three SIP account)  TFTP

 Outbound Proxy  Console

 HTTP

2 IVR Interface for The TA

You can use the PSTN phone to configure the TA. Please follow the instruction to configure your
terminal adapter.
Group IVR Action IVR Menu Choice Parameter(s) Notes:

After you hear “Option Successful,”

Function Reboot #195# None hang-up. The system will reboot

automatically.

System will automatically Reboot.

WARNING: ALL “User-Changeable”

Function Factory Reset #198# None NONDEFAULT SETTINGS WILL

BE LOST! This will include network

and service provider data.

Check IP IVR will announce the current IP

Info #120# None
Address address of the TA

Info Check IP Type #121# None IVR will announce if DHCP in

4
 GK982 VoIP TA
User Manual
enabled or disabled.

Check the IVR will announce current in use

Info #122# None
Phone Number VoIP number

Check Network IVR will announce the current

Info #123# None
Mask network mask of the TA.

Check Gateway IVR will announce the current

Info #124# None
IP Address gateway IP address of the TA.

Check Primary
IVR will announce the current
Info DNS Server #125# None
setting in the Primary DNS field.
Setting

Check Firmware IVR will announce the version of

Info #128# None
Version the firmware running on the TA.

The system will change to DHCP

Setting Set DHCP client #111# None
Client type

Enter IP address using numbers on

Set Static IP the telephone key pad. Use the * DHCP will be disabled and system
Setting #112xxx*xxx*xxx*xxx#
Address (star) key when entering a decimal will change to the Static IP type.

point.

Enter value using numbers on the

Set Network
Setting #113xxx*xxx*xxx*xxx# telephone key pad. Use the * (star) Must set Static IP first.
Mask
key when entering a decimal point.

Enter IP address using numbers on

Set Gateway IP the telephone key pad. Use the *

Setting #114xxx*xxx*xxx*xxx# Must set Static IP first.
Address (star) key when entering a decimal

point.

Enter IP address using numbers on

Set Primary DNS the telephone key pad. Use the *

Setting #115xxx*xxx*xxx*xxx# Must set Static IP first.
Server (star) key when entering a decimal

point.

1:G.711 u-Law, 2: G.711 a-Law, 3:

G.723.1, 4: G.729a, 5: G.726 16K, 6: You can set the codec you want to
Setting Set Codec #130+[1-8]#
G.726 24K, 7: G.726 32K, 8: G.726 the first priority.

40K,

Set Handset You can set the Handset gain to

Setting #131+[00~15]# Handset Gain from 0~15
Gain proper value, default is 6

Setting Set Handset #132+[00~12]# Handset Volume from 0~12 You can set the Handset volume to

5
 GK982 VoIP TA
User Manual
Volume proper value, default is 10

By default, NAT is on, LAN’s ip is 192.168.123.1(dial #120# to check LAN’s ip), WAN is DHCP client
(dial #126# to check WAN’s ip).

3 Setup the TA by Web Browser

The TA provides a built-in web server. You can use Web browser to configure the TA. First please input
the IP address in the web browser. In the end of IP address, please add the port number “:9999”.
Ex:http://192.168.1.100:9999. By default, NAT is on, LAN’s ip is 192.168.123.1(dial #120# to check LAN’s
ip), WAN is DHCP client (dial #126# to check WAN’s ip). You have to set your PC in the same subnet with
TA in order to connect them with each other.

3.1 Login

Please input the username and password into the blank field. The default setting is:
1. For Administrator, the username is: root; and the password is: test. If you use this account to
login, you can configure all the settings.
2. For normal user, the username is: user; and the password is: test. If you use this account to
login, but you can not configure the SIP setting.
Click the “Login” button will move into the TA web based management information page.
If you change the setting in the Web Management interface, please do remember to click the “Submit”
button in that page. After you finished the change of the setting, click the “Save” function in the left side, and
click the Save Button. When you finished the setting, please click the Reboot function in the left side, and
click the Reboot button in that page. After the system restart, all the setting can work properly.

3.2 System Information

When you login, you can see the TA’s current system information like firmware version, model name
etc in this page.
Also you can see the function lists in the left side. You can use mouse to click the function you want to
set up.

6
 GK982 VoIP TA
User Manual

3.3 Phone Book

In Phone Book function, you can setup the Phone Book. The phone book can store up to 140 groups of
number.
3.3.1 In phone book, you can add/delete phone number.
3.3.1.1 If you want to add phone number in Phone Book, you need input position, name, URL (ie. Phone
number). After input, please click “Add Phone” button.

3.3.1.2 To delete a group of number, first select the number, and then click “Delete Selected” button to delete
selected number.
3.3.1.3 To delete all number, click “Delete All” button, a dialogue window will show up. Click OK button to
delete all numbers.

7
 GK982 VoIP TA
User Manual

3.4 Phone Settings

Phone Setting contains Call Forward, SNTP Settings, Volume Settings, DND Settings, Caller ID, Flash
Time Settings, Call Waiting Settings and T.38 (Fax) Settings.
3.4.1 Call Forward: you can setup the phone number you want to forward to in this page. There are three
type of Forward mode. You can choose between All Forward, Busy Forward, and No Answer Forward
by click the corresponding icon.
3.4.1.1 All Forward: All incoming call will forward to the number you choosed. You can input the name and the
phone number in Name and URL field.
3.4.1.2 Busy Forward: If you are on the phone, the new incoming call will forward to the number you choosed.
You can input the name and the phone number in Name and URL field.
3.4.1.3 No Answer Forward: If you can not answer the phone, the incoming call will forward to the number you
choosed. You can input the name and the phone number in Name and URL field. Also you have to set
No Answer Fwd Time Out for system to start to forward the call to the number you choosed.
When you finished the setting, please click the Submit button.

3.4.2 SNTP Settings: you can setup the primary and secondary SNTP Server to get the date/time information.
Also you can base on your location to set the Time Zone, and how long is needed to synchronize. When
you finished the setting, please click the Submit button.

8
 GK982 VoIP TA
User Manual
3.4.3 Volume Settings: you can setup the Handset Volume, and Handset Gain and PSTN-In Gain. When you
finished the setting, please click the Submit button.
3.4.3.1 Handset Volume is to set the volume for you to hear from the handset.
3.4.3.2 Handset Gain is to set the gain send out to the other side.

3.4.4 DND Setting function: you can setup the Block Setting to keep the phone slience. You can choose DND
Always or DND a period. When you finished the setting, please click the Submit button.
3.4.4.1 DND Always: All incoming call will be blocked until disable this feature.
3.4.4.2 DND Period: Set a time period and the phone will be blocked during the time period. If the “From” time
is large than the “To” time, the “To” time will be regarded as next day’s time.

3.4.5 Caller ID function: you can set the device to show Caller ID in your PSTN Phone or IP Phone. There are
four selection of Caller ID. You need to base on your environment to set the Caller ID function for FSK
or DTMF.

9
 GK982 VoIP TA
User Manual
3.4.6 Dial Plan: This function provides basic dial number replacement rule.

Drop prefix: If No, when the number you dialed beginns with the number in right blank, the number in left
blank will be added automatically before your dialed number. If Yes, when the number you dialed
beginns with the number in right blank, the number will be replaced with the number in left blank.
Auto Dial Time: the number you dialed will be sent out automatically after the time you set here.

Example 1: Drop prefix: No; Replace rule 1: 002, 8613+8662

When your dialed number beginns with 8613 or 8662, 002 will be added to the beginning of your dialed
number.

Example 2: Drop prefix: Yes, Replace rule 2: 006, 002+003+004+005+007+009

When your dialed number beginns with 002 or 003, 004, 005, 007, 009, 002 or 003, 004, 005, 007, 009
will be replaced with 006.

10
 GK982 VoIP TA
User Manual

Example 3: Drop prefix: No; Replace rule 4: 007, 5xxx+35xx+21xx

When your dialed number beginns with 5 or 35, 21, and is 4 digits, 007 will be added to the beginning of
your dialed number.

3.4.7 Flash Time Setting function: Set max flash time.

3.4.8 Call Waiting Setting function: You can Enable/Disable the Call Waiting function, When you are talking
with someone, there is a new incoming call, you will hear the call waiting tone.

3.4.9 T.38(Fax) Setting: Enable/disable the fax function and set fax port.

11
 GK982 VoIP TA
User Manual
3.4.10 Hot line setting

If enabled, when you lift handset, the hot line number will be dialed out automatically.

3.4.11 Alarm setting

If On, the phone will alarm at alarm time.

3.5 Network

In Network you can check the Network status, configure the Network Settings, DDNS settings and
VLAN settings.

12
 GK982 VoIP TA
User Manual
3.5.1 Network Status: You can check the current Network setting in this page.

3.5.2 WAN Settings

3.5.2.1 Bridge settings: Enable/disable bridge mode. If you set the Bridge On, then the two Fast Ethernet
ports will be transparent
3.5.2.2 WAN Settings: Set network parameters for WAN. WAN can obtain IP address through 3 methods:
fixed IP, DHCP client, PPPoE. You may refer to your current network environment to configure the TA
properly.
3.5.2.3 The PPPoE Setting: Set PPPoE Username and Password. If you have the PPPoE account from your
Service Provider, please input the Username and the Password correctly.
When you finished the setting, please click the Submit button.

13
 GK982 VoIP TA
User Manual
3.5.3 LAN Settings: Set network parameters for LAN.You may refer to your current network environment to
configure the TA properly. When you finished the setting, please click the Submit button.

3.5.4 DDNS Setting: You can configure the DDNS setting in this page. You need to have the DDNS account
and input the informations properly. If you have a DDNS account with a public IP address, others can
call you via the DDNS account. But now most of the VoIP applications work with a SIP Proxy Server.
When you finished the setting, please click the Submit button.

14
 GK982 VoIP TA
User Manual
3.5.5 VLAN Settings

3.5.6 DMZ setting

15
 GK982 VoIP TA
User Manual
3.5.7 Virtual Server

3.6 SIP Settings

In SIP Settings you can setup the Service Domain, Port Settings, Codec Settings, Codec ID Setting,
DTMF Setting, RPort Setting and Other Settings. If the VoIP service is provided by ISP, you have to setup
the related informations correctly so that you can register to the SIP Proxy Server successfully.

3.6.1 In Service Domain Function you need to input the account and the related informations in this page.
Please refer to your ISP provider. You can register three SIP accounts in the TA. You can dial the VoIP
phone to your friends via first enabled SIP account and receive the phone from these three SIP
accounts.
First you need click Active to enable the Service Domain, then you can input the following items:
Display Name: you can input the name you want to display.
User Name: you need to input the User Name got from your ISP.
Register Name: you need to input the Register Name got from your ISP.
Register Password: you need to input the Register Password got from your ISP.
Domain Server: you need to input the Domain Server got from your ISP.
Proxy Server: you need to input the Proxy Server got from your ISP.
Outbound Proxy: you need to input the Outbound Proxy got from your ISP. If your ISP does not provide
the information, you can skip this item.

16
 GK982 VoIP TA
User Manual
Subscribe for MWI: When set to “On” a Subscribe for Message Waiting Indication will be sent
periodically.
Status: You can see the Register Status in the Status item. If the item shows “Registered”, then your TA
is registered to the ISP, you can make a phone call now.
If you have more than one SIP account, you can follow the steps to register to the other ISP.
When you finished the setting, please click the Submit button.

17
 GK982 VoIP TA
User Manual
3.6.2 Port Settings: you can setup the SIP and RTP port number in this page. Each ISP provider will have
different SIP/RTPport setting, please refer to the ISP to setup the port number correctly. When you
finished the setting, please click the Submit button.

3.6.3 Codec Settings: you can setup the Codec priority, RTP packet length, and VAD function in this page.
You need to follow the ISP suggestion to setup these items. When you finished the setting, please click
the Submit button.

18
 GK982 VoIP TA
User Manual
3.6.4 Codec ID Setting: Sometimes 2 VoIP devices with different Codec ID will cause some problems. If there
are some problems when you are talking with others, you may ask the other one what Codec ID he is
useing, and change your Codec ID to the same as his. When you finished the setting, please click the
Submit button.

3.6.5 DTMF Setting: Choose between 2833, Inband DTMF and Send DTMF SIP Info. Please refer to your
ISP for correct setting. When you finished the setting, please click the Submit button.

3.6.6 RPort Setting: Enable/Disable RPort. To change this setting, please following your ISP’s information.
When you finished the setting, please click the Submit button.

19
 GK982 VoIP TA
User Manual
3.6.7 Other Settings: you can setup the Hold by RFC, Voice/SIP QoS and SIP expire time in this page. To
change these settings please following your ISP’s information. The QoS setting is to set the voice
packets’ priority. If you set the value higher, the voice packets will get higher priority. But the QoS
function still need to cooperate with the others Internet devices. When you finished the setting, please
click the Submit button.

3.7 NAT Trans.

3.7.1 STUN Setting: you can setup the STUN Enable/Disable and STUN Server IP address in this page. This
function can help your TA working properly behind NAT. To change these settings please following your
ISP information. When you finished the setting, please click the Submit button.

20
 GK982 VoIP TA
User Manual

3.8 Others
3.8.1 Auto Config: Please set these according to your need.

3.8.2 FXS Port Setting: Please set this according to your country’s standard.

3.8.3 MAC Clone Setting: Enable/disable MAC Clone.

21
 GK982 VoIP TA
User Manual
3.8.4 Tones Settings

3.8.5 Advanced Settings

3.9 System Auth.

In System Authority you can change your login name and password. When you finished the setting,
please click the Submit button.

22
 GK982 VoIP TA
User Manual

3.10 Save Change

In Save Change you can save the changes you have made. If you want to make new setting into effect,
You have to click the Save button. After you click the Save button, the TA will automatically restart and the
new setting will take effect.

3.11 Update

In Update you can update the IP Phone’s firmware to the latest or restore the factory setting.
3.11.1 In New Firmware function you can update new firmware via Local PC/TFTP in this page. You can
ugrade the firmware by the following steps:
1) Select the firmware code type, Risc or DSP code.
2) Click the “Browse” button in the right side of the File Location, or you can type the correct
path and the filename in File Location blank.
3) Select the correct file you want to download to the IP Phone then click the Update button.

23
 GK982 VoIP TA
User Manual

3.11.2 Auto Update

24
 GK982 VoIP TA
User Manual
3.11.3 In Default Setting you can restore the TA to factory settings in this page. You can just click the Restore
button, then the TA will restore to default and automatically restart.

3.12 Reboot

Click the Reboot button, then the TA will reboot automatically.

4 Setup the TA by using Console (Hyper Terminal)

4.1 Configuration

Open the hyper terminal window, input a connection name and click “OK” button. Select
TCP/IP(WinSock) in “Connect using” field, input TA’s IP in “Host address” field, “Port number” use the
default value 23. Finally click “OK”.

25
 GK982 VoIP TA
User Manual

A login window will show up. Input your user name after “Login:” and password after “Password:”. If
user name and password are correct, it will prompt “Login Correct”, otherwise will prompt “Login Incorrect”.

After login successfully, the window should be:

4.2 Using CLI command to configure the TA

4.2.1 CLI command list as below:
Itno Command Description
1 ? Show CLI Command

26
 GK982 VoIP TA
User Manual
2 arp ARP Configuration
3 ipconfig Interface Configuration
4 save Save to flash
5 reboot Reboot
6 exit Exit
7 debugmode Enter Debug Mode
8 update Update Flash Code/RAM
9 auth Change User Name and Password
10 nat NAT Configuration
11 dns DNS Configuration
12 ping ping [-lN] [IP-addr|host-name]
13 sip SIP Configuration
14 ddns DDNS Configuration
15 sntp SNTP Configuration
16 vlan VLAN Configuration
17 time Get System Time
18 mactab Show MAC Learning Table
19 dump Read/Write Memory
20 book Edit phone book
21 reload Reload Factory Setting
22 watchdog WatchDog Function
23 phone Phone Setting
24 weblogo Change Web's logo
25 dsp Show dsp type
26 addport Add Nat Port Mapping
27 cid Select slic Cid
28 slic read or write slic registers
29 ver Firmware Version

4.2.1.1 “?” function is to show CLI command list in the screen.

4.2.1.2 arp function

Itno Command Description
1 ? Show 'arp' Option
2 -a Show ARP Table
3 -d Delete ARP Table

27
 GK982 VoIP TA
User Manual
4 -s Set Static ARP Table
5 (null) Show ARP Table

4.2.1.3 ipconfig function

Itno Command Description
1 ? Show 'ipconfig' Option
2 -if0 Interface 0
3 -if1 Interface 1
4 -if2 Interface 2
5 -h Set Host Name
6 -a Set ARP Cache Expire
7 -r Restore Current Setting
8 (null) Show IP Setting

4.2.1.3.1 ipconfig –ifN function  N is 0, 1, 2

Itno Command Description
1 ? Show 'ipconfig -ifN' Option
2 -t Set Host Type
3 -m Set MAC Address
4 -i Set IP Address
5 -nm Set Net Mask
6 -g Set Gateway
7 -dns0 Set Primary DNS server
8 -dns1 Set Secondary DNS server
9 -dr Set Default Route
10 -nat Set NAT
11 on Enable Interface
12 off Disable Interface
13 -dhcps DHCP Server Setting
14 -ddns Set DDNS
15 -bridge Set Bridge
16 -dev0 Set Device 0 Setting
17 -dev1 Set Device 1 Setting
18 -dev2 Set Device 2 Setting
19 (null) Show Interface Setting

28
 GK982 VoIP TA
User Manual
4.2.1.4 save function
Itno Command Description
1 ? Show 'save' Option
2 -book Save phone book
3 -sys Save system setting

4.2.1.5 reboot function is to restart the system.

4.2.1.6 exit function is to exit the CLI.

4.2.1.7 debugmode function is to enter the debugmode.

4.2.1.8 update function

Itno Command Description
1 ? Show 'update' Option
2 -os Update OSImage(IP filename)
3 -dsp Update DSP Image(IP filename)
4 -all Update All Image(IP filename)
5 -server Update Server (IP filename length)
6 -pcm PCM(IP filename)
-alaw alaw (IP filename)
-ulaw ulaw (IP filename)
-g729 g729 (IP filename)
-g723 g723 (IP filename)
-g726.16 g726.16 (IP filename)
-g726.24 g726.24 (IP filename)
-g726.32 g726.32 (IP filename)
-g726.40 g726.40 (IP filename)
IP is the TFTP server’s IP address, and the filename is the image you want to download into the
system.

4.2.1.9 auth function

Itno Command Description
1 ? Show 'auth' Option
2 -user Change User Name.'auth -sys3 -user xxx '
3 -pass Change Password. 'auth -sys3 -pass xxx xxx'
4 (null) Show auth's System/PPP Setting

29
 GK982 VoIP TA
User Manual
In each item includes
Itno Command Description
1 ? Show 'auth' Option
2 -admin Change Administrator user name/password
3 -sys0 Change System user0 user name/password
4 -sys1 Change System user1 user name/password
5 -sys2 Change System user2 user name/password
6 -sys3 Change System user3 user name/password
7 -sys4 Change System user4 user name/password
8 -norm0 Change Normal user0 user name/password
9 -norm1 Change Normal user1 user name/password
10 -norm2 Change Normal user2 user name/password
11 -norm3 Change Normal user3 user name/password
12 -norm4 Change Normal user4 user name/password
13 -ppp Change PPP user name/password
14 (null) Show auth Setting
If you want to change the password, you need to type the password twice in the CLI.

4.2.1.10 nat function

Itno Command Description
1 ? Show 'nat' Option
2 -vs Set 'nat -vs' Option
3 -dmz Set 'nat -dmz' Option
4 (null) Show NAT Setting

In DMZ item includes

Itno Command Description
1 ? Show 'nat -dmz' Option
2 on Enable DMZ
3 off Enable DMZ
4 -ip Set DMZ IP address
5 (null) Show DMZ Setting

4.2.1.11 dns function

Itno Command Description
1 ? Show 'dns' Option

30
 GK982 VoIP TA
User Manual
2 -q DNS query. dns -q domain-name
3 (null) Show DNS Table

4.2.1.12 ping function

Itno Command Description
1 ? Show 'ping' Option
2 -l ping [-l N] [IP-addr|host-name]
3 (null) ping [IP-addr|host-name]

4.2.1.13 sip function

Itno Command Description
1 ? Show 'sip' Option
2 -proxy0 sip -proxy0
3 -proxy1 sip -proxy1
4 -proxy2 sip -proxy2
5 -upnp sip -upnp on/off/show
6 -exts sip -exts sip upnp external-port
7 -extr sip -extr rtp upnp external-port
8 -sipp sip udp port
9 -rtpp sip rtp port
10 -stun sip -stun on/off
11 -rport sip -rport on/off
12 -sserver sip -sserver stun-server
13 -out sip -out outbound-proxy
14 -dump sip –dump
15 -log sip -log on/off
16 -drtp sip -drtp 0/1/2
17 -rtpnc sip -rtpnc on/off
18 -wanip sip –wanip
19 -nattype sip –nattype
20 -hbyrfc sip –hbyrfc
21 -dereg sip -dereg
22 -restart sip -restart
23 -jbt sip -jitter buffer Threshold
24 (null) Show SIP Setting

31
 GK982 VoIP TA
User Manual
4.2.1.14 ddns function
Itno Command Description
1 ? Show 'ddns' Option
2 -type Set DDNS Type
3 -host Set Host Name
4 -wild Set Wild Card Mode
5 -mx Set Mail Exchanger
6 -backmx Set Mail Exchanger Mode
7 -offline Set Offline Mode
8 -user Set Login User Name
9 -pass Set Login Password
10 (null) Show DDNS Setting

4.2.1.15 sntp function

Itno Command Description
1 ? Show 'sntp' Option
2 -on Enable SNTP Client
3 -off Disable SNTP Client
4 -ip1 Set SNTP Server1 IP
5 -ip2 Set SNTP Server2 IP
6 -mode Set SNTP Client Mode
7 -zone Set GMT Time Zone: [+|-][hour]:[min]
8 -adjust Set Adjustment Time: [second]
9 (null) Show SNTP Setting

4.2.1.16 vlan function

Itno Command Description
1 ? Show 'vlan' Option
2 -tx Tx Vlan setting
3 -rx Rx Vlan setting
4 (null) Show Vlan Setting

4.2.1.17 time function

Itno Command Description
1 ? Show 'Time' Option
2 -t Modify Time: hour:min:sec
3 -d Modify date: year:mon:date

32
 GK982 VoIP TA
User Manual
4 (null) Show Data & Time

4.2.1.18 mactab function is to show MAC learning table.

4.2.1.19 dump function

Itno Command Description
1 ? Show 'dump' Option
2 -r dump -r XXXXxxxx
3 -w dump -w XXXXxxxx XX

4.2.1.20 book function

Itno Command Description
1 ? Show 'book' Option
2 -a Show answer list
3 -c Show call list
4 -s speed dial
5 -p phone book

4.2.1.21 reload function is to Reload Factory Setting, please make sure you want to do the factory reset.

4.2.1.22 watchdog function

Itno Command Description
1 ? Show 'WatchDog' Option
2 on Enable WatchDog
3 off Disable WatchDog
4 (null) Show WatchDog Setting

4.2.1.23 phone function

Itno Command Description
1 ? Show 'phone' Option
2 -autoanswer phone auto answer
3 -vol Volume setting
4 -block Block Incoming call
5 -ring Set Melody Ringer
6 -forward Auto-forward Incall to Phone[0-9] in Book
7 (null) Show Phone Setting

33
 GK982 VoIP TA
User Manual
4.2.1.24 weblogo function
Itno Command Description
1 ? Show 'weblogo' Option
2 -on Vender Logo
3 -off Crystal media Logo
4 (null) Show weblogo Setting

4.2.1.25 dsp function is to show dsp code type.

4.2.1.26 addport function is to add Nat Port Mapping

4.2.1.27 cid function

Itno Command Description
1 ? Show 'cid' Option
2 -off Disable Slic Cid signal
3 -1 Tx FSK after 1st Ring
4 -2 Tx FSK before 1st Ring
5 -3 Tx DTMF before 1st Ring
6 -4 Tx FSK with Line reversal before 1st Ring
7 -5 Tx DTMF with Line reversal before 1st Ring
8 -time FSK cid with time message
9 -single Single type FSK CID
10 (null) Show Cid Option

4.2.1.28 slic function

Itno Command Description
1 ? Show 'slic' Option
2 -ring Issue Ring signal
3 -r read slic addr
4 -w write slic addr
5 -a read all slic reg
6 (null) Show slic register

4.2.1.29 ver function is to show Firmware Version.

5 How to make a phone call

34
 GK982 VoIP TA
User Manual
When your TA is configured properly, you can make a phone call to your friend in the same Service
provider. Please make sure all the cables are connected properly, like PSTN Line cable, Phone cable,
Ethernet cable, power cable.
If you want to make a phone call, you can dial the phone number and press “#” button to start to dial the
phone number.

5.1 Dial a PSTN Phone call

Dial “0*” before a phone number. Press “#” button to make the TA send out the dialed number.

5.2 Dial a IP Phone call

Dial IP phone number directly. Press “#” button to make the TA send out the dialed number.
The TA also provides some functions listed as below:
1. Call Waiting: When a new call is coming while you are talking, you can push the Flash button to
switch to the new call. You can push the Flash button to switch between the two calls.
2. Call Hold: You can push the Hold key to hold the current call for a while, then push Hold key again
to keep talking.
3. 3-way conference: If you want to make a 3-way conference call, you can make a phone call to the
first phone number. After the call is established, push the Flash button, dial #512#, and then you
can hear the Dial tone, then make a phone call to the second phone number. When the second call
is established, press the Flash button again.

6 Get a FWD account

1. From the website www.freeworlddialup.com; you can apply an account to use the VoIP
communication. You can follow the instruction to input the information. After you finished, you will
receive a mail sent by the FWD mail system, you will get the account information in the mail.
2. When you got the account, you can setup the related information into the TA.
3. You can setup the related information into the TA by web browser. Also you can use Telnet, Console
via CLI command to configure the TA. You need to input the Proxy Name, Domain Name, Register
Name, and password. The Display Name you can input what you want to let others see.
4. After you registered to the SIP Server, you can try to call your friends who also registered in the
same SIP Server. You just need to dial your friend’s user name (registered name) and press “#”
then you can make a phone call to your friend.

35