VSP 516 Series User Manual

RGBlink
The pictures and data in the user manual are reference only, check the real
product please!

Downloaded from www.Manualslib.com manuals search engine

 CONTENT

1.0 Safety ........................................................................................... 1

2.0 Specification ................................................................................. 2
2.1 Parameters ............................................................................. 3
3.0 Connection ................................................................................... 5
3.1 VSP 516 Back Panel ................................................................ 5
3.2 How to install .......................................................................... 7
4.0 Front Panel Keyboard Operation ................................................... 9
4.1 VSP 516 series Operator Guideline ......................................... 9
4.2 Video Processor Menu ........................................................... 11

Downloaded from www.Manualslib.com manuals search engine

 1.0 Safety
The general safety information in this summary is for operating person. Any
requirement, please feel freely to contact our service engineer.

Power Source
This product is intended to operate from a power source
between 85~265 volts rms . This product is only workable under
correct power condition, which is already mark on the back panel
of the power.

High Voltage
There are many high voltage components inside.

Do not Remove Covers and Panels

Do not remove Covers in any conditions. There are not any
spare components inside for maintenance, so do not maintain
this product by userrselves, any requirement, please feel free to
contact our service engineer. Keep heavy device from power
cord.

Grounding the Product and Use the Proper Fuse

This product is grounded through the grounding conductor of
the power cord. To Avoid electrical shock, plug the power cord
into a properly wired receptacle before connecting to the product
input or output terminals.

Keep away from Magnet, Motor, TV and Transformer.

Guard Against Damp

Keep using inside clean and dryness environment, once the
device get wet, must remove power cord right now.

Keep away Exploder

Do not operate the device inside dangerous and easy
explosive gas, which it may make fire, blast or something without
expectation.

Keep away Pour Liquid and Fragment

It is forbid to pour liquid, metal fragment or anything else
inside this device to avoid fire and other accident. Once that
happens, must remove power cord and try to make it clean
before power on again.

VSP 516 Series User Manual 1

Downloaded from www.Manualslib.com manuals search engine

 2.0 Specification

AVDSP series video processors are designed by the latest high performance

image processing technology. AVDSP can handle following video without limit,

include CVBS（Composite）、S-Video (YC)、YCbCr、YPbPr、RGBHV（VGA）、

DVI-D、HDMI、SDI（SD-SDI、HD-SDI） and VOIP（Copper RJ45）.

Compare table of AVDSP as following.

VSP 516 Series User Manual 2

Downloaded from www.Manualslib.com manuals search engine

 2.1 Parameters
Composite BNC Input
Number of Inputs 3
Supported Standards PAL/NTSC; 480i,576i
Signal Level 1Vpp±3db (0.7V Video+0.3v Sync ) 75ohm
S-video DIN4 Input
Number of Inputs 1
Supported Standards PAL/NTSC; 480i,576i
Signal Level Y:1Vpp±3dB (0.7V Video+0.3v Sync ) 75ohm
U/V:0.7Vpp±3dB 75ohm
YPbPr BNC Input
Number of Inputs BNC*3
Supported Standards Anologue HD Input
480i,576i,480p,576p,720p50,720i60,1080i50,1080p50
1080i50,1080i60
Signal Level Y:1Vpp±3dB (0.7V Video+0.3v Sync ) 75ohm
Pb/Pr:0.7Vpp±3dB 75ohm
VGA DB15 Input
Number of Inputs 1
Connector Standard DB15 socket
Supported Standards VGA-UXGA;

1024×768×60, 800×600×60, 640×480×60

Signal Level
R、G、B、Hsync、Vsync:0 to1Vpp±3dB (0.7V Video+0.3v

Sync ) 75ohm

black level：300mV Sync-tip：0V

DVI Input
Number of Inputs 1
Connector Standard DVI-I socket
Supported Resolution
SMPTE：625/25 PAL, 525/29.97 NTSC, 625/50p PAL,

525/59.94p
NTSC:1080i50,1080i59.94/60,720p50,720p59.94/60

VESA：800×600×60Hz，1024×768×60Hz，1280×768×

60Hz，1280×1024×60Hz，1600×1200×60Hz，1920×1080

×60Hz，1920×1080×50Hz

VSP 516 Series User Manual 3

Downloaded from www.Manualslib.com manuals search engine

 Signal Level
TMDS pwl，single pixel input，165MHz bandwidth

Standard HDMI 1.3

SDI Input (Optional module）

Number of Inputs 1
Connector BNC
Data Rate Range 19.4Mbps~1.5Gbps
ITU-R BT.656,ITU-R BT.601,SMPTE 259M, SMPTE 292,
Supported Standards
SMPTE 297

Equalization） Belden 1694A 100M HD1.485G，350m SD 270Mbps

Audio Input
Number of Inputs 10
Connector Standard RCA socket
Audio Standard 48Kbps 24bit balance analog audio
DVI Output
Number of Inputs 1
Connector Standard DVI-I Interface
Signal Level
TMDS pwl， 165MHz bandwidth

Supported Standards
VESA：800×600×60Hz，800×600×75Hz，1024×768×

60Hz，1024×768×75Hz，1280×1024×60Hz, 1920×1080P

×60Hz

VGA Output
Number of Inputs 1
Connector Standard DB15 socket
Supported Standards
VESA：800×600×60Hz，800×600×75Hz，1024×768×

60Hz，1024×768×75Hz，1280×1024×60Hz, 1920×1080P

×60Hz

Signal Level
R、G、B、Hsync、Vsync:0 to1Vpp±3dB (0.7V Video+0.3v

Sync ) 75ohm

black level：300mV Sync-tip：0V

Audio Output

VSP 516 Series User Manual 4

Downloaded from www.Manualslib.com manuals search engine

 Number of Outputs 1
Connector Standard 1/4” socket
Audio Standard 48Kbps 24bit balance analog audio
Function
Source Switch support every signal alpha key operation
PIP PIP for SD with HD and HD with HD
AV Sync supported
Extras
Communication RS232 USB TCP/IP
Power Supply 85-264V 2A IEC-3
Working Environment 0°C~45°C
Stored Environment 10% to 90%
Product Warranty 1 year

VSP 516H is different from VSP 516 as following output resolution.

800×600×75Hz，1024×768×75Hz，1280×768×60Hz
Note:
1920×1080p×60Hz
Specifications are subject to change without notice.

3.0 Connection

3.1 VSP 516 Back Panel

1、Dial the code switch；

2 、 10/100M interface (copper RJ45). Used to connect the computer by

568B-568A twist-pair;

3、USB interface，Used to connect the computer；

4、RS232 interface (RJ11) for AVDSP processor. Used to connect the computer;

VSP 516 Series User Manual 5

Downloaded from www.Manualslib.com manuals search engine

 5-14、Audio interface, support audio signals from DVD player or audio sources;

15-16、Gigabit copper port, connect to LED screen;

17、Gigabit Transmitter card power interface, not use inside case;

18、Gigabit Transmitter card USB control interface.

19、Gigabit Transmitter card DVI input，connect to DVI output of VSP 516.

（This Connection does not support hot-plugging）

20、SDI Input BNC, used to support SD/HD SDI input。Input the video signal

from the HD player, HD projector. (SDI input is the optional module)

VSP 516S can install a SDI input module to support SD-SDI and
Note: HD-SDI signal, compared to VSP 516 and VSP 516H.

21-23、Composite input interface，Composite BNC. Used to input composite

signal （PAL, NTSC, SECAM compatible）;

24 、 S-Video DIN 4, used to input S-Video signal （ PAL, NTSC, SECAM

compatible）;

VSP 516 Series User Manual 6

Downloaded from www.Manualslib.com manuals search engine

 25、DVI input interface。Input the video signal from computer, DVI signal

generator. Connect to the same DVI interface on VSP 516;

（This Connection does not support hot-plugging）

26-28、R/Pr G/Y B/Pb BNC, used to support SD/HD analog video input, up to

1080p60;

29、VGA input interface, DB-15, used to support Analog RGB input; Connect to

the VGA interface on the VSP processor.

30、AUDIO output interface2，connect to the audio player。

31、DVI output interface，connect to the monitor or LED screen which has DVI

interface. （This Connection does not support hot-plugging）

32、VGA output interface, connect to the monitor, projector and so on；

33-34、Switch and power. It must use IEC-3 power line. Always ground to avoid

electric shock.

3.2 How to install

VSP 516 frame size

VSP 516 Series User Manual 7

Downloaded from www.Manualslib.com manuals search engine

 VSP 516S has the same frame size of VSP 516H and VSP 516S;
Note:

VSP 516 Series User Manual 8

Downloaded from www.Manualslib.com manuals search engine

 4.0 Front Panel Keyboard Operation

Insert power cord and push power to ON position. LCD module on the front

panel will show RGBLINK and go into self verification before it load last setting

config and send processed image to the target monitor. For the first setup, CV1

input is default source. With front panel keyboard, user can operate VSP with

menu display on LCD module.

4.1 VSP 516 series Operator Guideline

VSP 516 series front panel as following：

1. LCD Module;
2. Keyboard:

ESC: push to exit from current choice item;

SEL: push to confirm the current choice item;

UP: push to select up items in LCD menu;

DOWN: push to select down in LCD menu;

LEFT：push to select the left items

RIGHT：push to select the right items

CV1：switch to composite 1 input

CV2：switch to composite 2 input；

CV3：switch to composite 3 input；

SVID：switch to SVideo；

VGA: switch to analog RGB input；

YPbPr: switch to high definition component，

VSP 516 Series User Manual 9

Downloaded from www.Manualslib.com manuals search engine

 DVI: Switch to DVI input

+:Switch to amplify the audio;

-:Switch to down scale the audio;

SDI: SDI input, compatible with HD/SD SDI, push to switch to SDI input;

VSP 516S can install a SDI input module to support SD-SDI and
Note: HD-SDI signal, compared to VSP 516 and VSP 516H.

PBP:Switch to show two pictures in side by side mode;

VSP516S front panel remove PBP mode button to SDI button;

Note: VSP516 and VSP516H front panel keep PBP mode button, but
remove SDI button.

PIP:Switch to show picture in picture on the screen. CV1 is the default

small picture on the top left corner, DVI is the default picture with full screen.

SAVE1：switch to use the user-defined mode 1;

SAVE2：switch to use the user-defined mode 2;

SAVE3：switch to use the user-defined mode 3;

FS：switch to selet full screen or zoom view, just for single picture mode;

RATIO：switch to select aspect ratio 4：3 or 16：9;

MSA：switch to select the audio channel which send to output in multi

picture mode;

MUTE：Switch to select mute sound or return;

MENU:push to go to main menu;

FRE:push to freeze the video image or live again;（FreezeÆLiveÆFreeze）

AB: Channel Switch, only works under the PBP mode. Push it to switch between

VSP 516 Series User Manual 10

Downloaded from www.Manualslib.com manuals search engine

 the picture of main channel and the picture of subchannel. For instance, if

processor now works under subchannel mode, user can switch channels in

subchannel; be under subchannel mode if you push Reset button.

AB in VSP 516 doesn't support Fade-In-Out.

Note:

SCALE: push to go to between scaleÆzoomÆcropÆscale mode；

BRT：push to adjust the brightness and the contrast ratio, push to enter

to the relevant Menu, and then push the UP and DOWN to adjust the

brightness and the contrast ratio.

OUT: push to select the output format by using the UP and DOWN.

I/II: push to set single or dual channel

SAVE: push to save current config.

4.2 Video Processor Menu

System menu as follows;

>VSP 516
*Dev Info Recall ↓

Fig. 1

The first line shows VSP 516.

Push the right and left direction key to select the left or right menu. Before

the menu item, if there is a * sign, means the menu item has been selected,

you can push the Select key to enter it.

The ↑ on the right means you can select the menu items by pushing the up

and down direction key.

User can check the information of the equipment in “Dev Info” menu

(including the manufacturer、serial-number );

User can get more service and support according to the serial-number.

VSP 516 Series User Manual 11

Downloaded from www.Manualslib.com manuals search engine

 RGBlink Co ltd.
>SN：3204

User can check current input and output sources in Dev Info menu also.

Input: CV1 1024x768x60

Output: CV2 1024x768x60

Touch UP/DOWN to check customer service E-mail and web site address;

User can visit company web site for more product information.

[email protected]
www.rgblink.com

Touch UP/DOWN to check System time

System time:
2009-08-17 15:12:35

User can do a Factory Settings in Recall menu, after successful reset you will

see the menu as follows:

Factory reset was completed !

Push the MENU to enter the main menu, then push up and down direction

key, the menu as follows:

>VSP 516
*Language Alpha ↑

Push the LEFT/RIGHT to select the relevant submenu.

LANGUAGE submenu as follows：

*LANGUAGE
>Chinese English

Push UP/DWON to enter Alpha setup, user can set value from 0 to 100,

0 means video or graphic would be disappear and 100 means normal;

Port A and Port B stand for two channel picture;

VSP 516 Series User Manual 12

Downloaded from www.Manualslib.com manuals search engine

 *Alpha
Port A Value： 100

Push OUT to enter the Output menu, push the UP or DOWN to select

different output resolution, push OK to confirm the output resolution.

Advance submenu as follows：

VSP516H and VSP 516S support the minus pixel shift

function, which VSP 516 can not support;

Note: VSP516H and VSP 516S can not support pixel shift on the
resolution 1920×1080P×60Hz.
Pixel shift to minus:

Press UP/DOWN and select the menu as shown in Figure 1:

>VSP 516
*Advance XY_Pos ↑

Figure 1
Press LEFT/RIGHT and select XY_Pos to enter the submenu of adjusting
effective area;
H_BLANK
*HS: 46

V_BLANK
*VS: 38

XY_Pos：The sub-menu of which is used to adjust the position of overall

effective area shown on the screen or monitor.

H_BLANK: The overall effective area can be moved around by adjusting the
value of H_BLANK.

V_BLANK: The overall effective area can be moved up and down by

adjusting the value of V_BLANK.
Screen parameter:
Hsize: 1024

Step：user can set the step of scale;

HSize：set the horizontal size of the image;

VSP 516 Series User Manual 13

Downloaded from www.Manualslib.com manuals search engine

 VSize：set the vertical size of the image;

HPos：set the horizontal position of the image;

VPos：set the vertical position of the image；

User can set size and position of the screen simply, Mainly applies to LED

screens users. After setting screen parameter， the user choice PIP or PBP

operation, display picture can directly shows on corresponding screen。

Output
>1024x768x60

Push the / to enter Single or Dual channel menu , push the UP / DOWN to

select the single or dual channel, push SEL to confirm the single channel or dual

channel work state;

Setup
Dual

Setup
Single

Select the input channel, push the UP/DOWN, and SEL to confirm the

different input channel. User can also push the channel name on the

keyboard to go into the input channel.

Source Select
>CV1

AB in VSP 516 is used to enable channel if dual channel mode.

Setup
A on B

OR：

Setup
A on B

Push SCALE to set the size and position of the image, push UP/DOWN and

VSP 516 Series User Manual 14

Downloaded from www.Manualslib.com manuals search engine

 SEL to confirm the relevant items;

Step：user can set the step of scale;

HSize：set the horizontal size of the image;

VSize：set the vertical size of the image;

HPos：set the horizontal position of the image;

VPos：set the vertical position of the image；

Scale
> Step 10

When shown in one single image, the ratio between the

horizontal and the vertical of the image should be equal to or
less than 3.
When shown in dual image, there is a limit of aspect ratio of the
Note: image in the left side: The horizontal of the image in the left
side should be larger than that of the image in the right side.
This rule still need to be followed even if the images are dragged
to the opposite.
Push the FRE to freeze the live image or live the freeze image.

Freeze Frame
Once gain for live

OR：

Live Frame
Once gain for live

Push BRT to set the brightness and the contrast ratio:

VSP 516
Brightness 50 ↓

OR：

VSP 516
Contrast 50 ↑

Push SAVE and then push SAVE1 or SAVE2 to save the operation to SAVE1 or

VSP 516 Series User Manual 15

Downloaded from www.Manualslib.com manuals search engine

 SAVE2;Push SAVE1 or SAVE2 to execute relative operation after user save

the operation sucessfully.

Add prompt to save function

For VSP 516 series, when user push the SAVE key, the SAVE1、
Note:
SAVE2 and SAVE3 lights on the front panel will go on at the same
time, it reminds user must press SAVE1 or SAVE 2 to finish the
final save function.

Slelect Save Mode ！

Push Esc To Exit

Touch FS button can realize screen switch between scale mode and full screen

mode.

Picture mode
Full Size

Picture mode
Small Size

Touch RATIO button，set screen width and height.

Size: 4:3

Size: 16:9

Size: Normal

MSA ： touch the main sub-channel audio and audio channel switching

button,main channel will play sound.

Main window audio

Touch again, sub-channel will play sound.

Sub window audio

VSP 516 Series User Manual 16

Downloaded from www.Manualslib.com manuals search engine

 MUTE：mute the equipment, shown as the picture:

Mute

Touch MUTE again will revovery to play sound

VSP 516 Series User Manual 17

Downloaded from www.Manualslib.com manuals search engine

 VSP 516 Series User Manual 18

Downloaded from www.Manualslib.com manuals search engine