Dg4000e 2
Dg4000e 2
Dg4000e 2
series
Compatible with our linear
gauge sensors to measure
dimension, thickness and
displacement.
BS/GS series
OK
BS/GS series
A 100Kg
B
With a 1 kg load as the zero
Thickness measurement
=A+B point, rank differentiation is
BS/GS series performed for the amount
BS/GS series
Zero point of change when a 100 kg
at 1 kg load is applied.
Golf ball
Recommended digital gauge counter: DG-2310 Recommended digital gauge counter: DG-4000 series
Specifications
Item Model name DG-4120 DG-4240 DG-4280
Display LED, 5-digits for numeric values and 1 digit for polarity (-)
Display range 0.000 to ±99.999, 0.00 to ±999.99 (mm)
Signal input Phase difference rectangular waveform at 90° from DC to 75kHz
External control signal Hold, Reset Hold, Reset Hold, Reset
(BCD connector) Comparator gate Preset gate 1 to 4
(Terminal) (Terminal)
Digital output BCD data, Polarity, Error (Switchover of positive/negative logic, open collector output)
Relay output (Register load) – Signal contact output for each, Capacity 30 VDC/2A
Comparator setting – Digital switches at the front panel (Push type), 5 digits
and polarity
Power supply 100 to 240 VAC 50/60Hz, Approx. 7VA
Operating temperature 0 to 40°C
Storage temperature -10 to 55°C
Outer dimensions 72 (W) x 72(H) x 118(D) mm 96 (W) x 96(H) x 127(D) mm
Accessories Instruction manual Instruction manual
Panel mount fixture Panel mount fixture
Terminal cover (*Power cable is an option.)
(*Power cable is an option.)
External drawings
DG-4120 Panel thickness Max.5mm DG-4240 DG-4280
72
Terminal Terminal
96
96
Cover Cover
Option Option
(1.2)
(1.2)
72 6.5 Panel mounting fixture
104 (13.7)
96 96 Panel mounting fixture
100 or more Panel mounting fixture 19.5
(2.3) 19.5 119.5 (5) (2.3) 119.5 (5)
Panel thickness Max.5mm Panel thickness Max. 5mm
+0.7
68 0
99 or more 99 or more
67.4
+0.7
68 0
82 or more
120 or more
120 or more
110.5
110.5
92 0
92 0
54.8 54.8
Panel Cutout Dimensions Rear View
Rear View
Panel Cutout Dimensions Panel Cutout Dimensions
* For the specifications of model DG-4140, an exclusive catalog is available. Please contact us or nearest distributor accordingly.
Specifications
DG-2310
No. of inputs 2 channels (Compatible with our GS/BS series gauge sensors)
Display Main display: LED - Polarity (-) & numerical values (6 digits)
Sub display: LCD - 16 characters x 2 lines
Comparator display: LED - Upper & Lower/Red
Good/Green
External input signal For reset, peak hold, hold, key-protection operations (by voltage or non-voltage contact signal)
BCD signal Output: BCD, Polarity, judgment, error: open collector (Max. 30V)
Input: Reset/Hold, Hi: +4 to +5.25V, Lo: 0 to 1V
Output signal Analog 0 to ±10V (Full Scale), 12-bit D/A, Refresh rate: less than 10ms
RS-232C Baud rate: 2400/4800/9600 bps
Comparator Setting range at 0 to ±999999, output: LOWER/GOOD/UPPER
Semiconductor relay, 30 VAC/0.1A, Refresh rate: less than 10ms
Calculation A+B, A-B, B
Peak hold MAX, MIN, MAX-MIN (RANGE)
Offset Setting range at 0 to ±999999
Resolution 0.5µm, 1µm, 10µm (It should be set with the resolution of the sensor.)
Power supply 100 to 240 VAC (50/60Hz)
Operating temp. 0 to 40°C
Storage temp. -10 to 55°C
Size 144(W) x 72(H) x 180(D)mm
Weight Approx. 1.3 kg
UPPER
GOOD
LOWER mm
72
RESET MENU
SELECT
COMP SET
ON/OFF NEXT
MAX4
(9.5)
POWER
T1 EXT-IN BCD-OUT
68 +0.5
RS-232C 50.U0
30VA MAX
FUSE 2A T
T2
OUTPUT
138 +0.5
0
Rear View
• Outer appearance and specifications are subject to change without prior notice.
URL: http://www.onosokki.co.jp/English/english.htm