Fiber Optical Multiplexers

16 Ch E1/T1, 3x 10/100-T
Ethernet Fiber Multiplexer
FMUX01A / Plus
The FMUX01A/Plus is a 1U, 19" rack mountable, PDH fiber Specifications
optic multiplexer that transmits up to 16 channels plus a wire
Optical Interface Connector : 1x9 (SC, ST, FC)
speed 100Base-TX Fast Ethernet channel over a single fiber
Data rate : 155.52Mbps
optic link. The FMUX01A/Plus chassis is available in five
Bit Error Rate : Less than 10-11
different power configurations: single AC, single DC, dual AC,
dual DC or AC+DC. The AC supplies operate from 90~260VAC Fiber : MM 62.2/125μm, 50/125μm.
while DC supplies operate from 36~72VDC or 20~60VDC. From SM 9/125μm
the rear of the chassis, one to four hot swappable quad E1 or Distance : MM 2km. SM 15/30/50/80/120km,
T1 line cards, serial data communications (V.35, X.21, RS-530) WDM 20/40/60/80km
or FXO/FXS voice cards are supported. The standard Wavelength : 1310, 1550nm
FMUX01A/Plus configuration may be viewed or set via the Electrical Interface Console, SNMP : RJ45
front panel LCD/menu keys, serial VT-100 terminal connection, Ethernet : 2 x RJ45
Telnet, web HTTP or SNMP.
Alarm : RS232 (DB9F)
Standard E1:ITU-T, T1:ITU-T, AT&T, ANSI, Ethernet: IEEE802.3x
Indication PWR, Alarm, LBK, RD, LCK, RNG, ACO, Port, Channels
Features Power input AC : 100 ~240V
● 1U, 19 (23)” 4 slot chassis DC24 : 20 ~ 60V, DC48 : 36 ~ 72V
● 16 E1 (2.048Mb/s) Multiplexer, 100Mbps Ethernet and RS-232 data Power Consumption < 40W
(async ) Dimensions 250 x 438 x 43mm (D x W x H)
● RS-232 port for system console Weight 3.58 kg
● One alarm output port, one Order Wire port Temperature 0°C ~ 50°C (Operating), 0°C ~ 70°C (Storage)
● SNMP management Humidity 10 ~ 90% non-condensing
● LCD plus menu keys for local configuration Certification CE, FCC, RoHS
● 2 plug-in I/O slots for optical interface cards MTBF 57350 hours

Central Office (CO) Customer Premise Equipment (CPE)

Order Wire Order Router

3G BST Wire
Router
ADM STM1

FE 16E1
16E1
6E1

LAN
FE
GbE LAN FMUX01A/Plus NMS FMUX01A/Plus
RS232 clear
channel
RS232 clear channel
NMS

1-99 FMUX01A / Plus CTC UNION TECHNOLOGIES CO., LTD. www.ctcu.com

 Fiber Optical Multiplexers

Specifications - Modules
1

Fiber Optical Multiplexers

Fiber Optical Module I/F FXO/FXS I/F

Fiber Optical Module FXO/FXS Module

Ports 1 + 1 ports (redundant) Standards G.711 A-law
Fiber Cable 9/ 125 um for single mode ; 50/ 125 Voice channel T.38 and Group III Fax relay
or 62.5/ 125 for multi-mode transparent at 2.4 ~14.4kbps Fax application
System Power Gain > 25dB@1*10-10 Distance 2km
Wavelength Range 1280 — 1550nm Bandwidth 64K voice channel
Connector SC, FC, ST Connector RJ11*4 (4 v oice channel /per unit)
Receiv e Level Short haul - 15dB
The switching time between is less than 50m sec
Internet application Support modem pass-through

E1 BNC I/F E1 Wire-Wrap I/F Datacom I/F

E1 Module Datacom Interface Module
Standards ITU-T G.703, G.704, G.706, G.732 Standards N/A
Ports 4 ports Card Type V.35/ RS-530 (Include X.21 and RS-449)
Framing Unframed ( clear channel ) / RS-232 I/F
Data rate 2.048 Mbps ± 50 ppm Bit rate n x 64K, n = 1 to 32
Line code HDB3/AMI V.35 & RS-530 up to 2Mbps
Receive Level Short haul - 15dB RS-232 up to 128Kbps (SYNC)
Line impedance 75 ohms ± 5% / 120 ohms ± 5% V.35H & RS-530H up to 8Mbps
Connector RJ-45 for 120 ohms BNC for Line code NRZ
75 ohms Wirewrap for 120 ohms Clock Mode Transparent, Recovery
External (From data port)
Internal (From oscillator)
Control Signal CTS always On or follows RTS
DSR constantly ON, except during test
loops (RS-530 DSR always connect to DTR)
DCD constantly ON,except during fiber signal loss
Test Loops Local loop back, Remote loop back, V.54
Connector Type Uses HD-68 pin D type Female with
adapter cables

T1 RJ - 45 I/F
T1 Interface Module
Standards ITU-T G.703, G.704, AT&T TR-62411,ANSI T1.403
Ports 4 ports
Framing Unframed ( clear channel )
Data rate 1.544 Mbps ±50 ppm
Line code B8ZS / AMI
Receive Level Short haul - 15dB
Line impedance 100 ohms ±5%
Connector RJ-45 for 100 ohms Wirewrap for 100 ohms

www.ctcu.com CTC UNION TECHNOLOGIES CO., LTD. FMUX01A / Plus 1-100

 Fiber Optical Multiplexers

Ordering Info rmation

Orde
Model Name Type Description
FMUX01A/Plus - AC Chassis w/Power Chassis with 110 ~ 240 VAC
FMUX01A/Plus - DC24 Chassis w/Power Chassis with 24VDC
FMUX01A/Plus - DC48 Chassis w/Power Chassis with 48VDC
FMUX01A/Plus - AD24 Chassis w/Power Chassis with one AC and one DC power for Redundant 24VDC
FMUX01A/Plus - AD48 Chassis w/Power Chassis with one AC and one DC power for Redundant 48VDC
FMUX01A/Plus - AA Chassis w/Power Chassis with two 100 ~240VAC power for Redundant
FMUX01A/Plus - DD24 Chassis w/Power Chassis with two DC power for Redundant 24VDC
FMUX01A/Plus - DD48 Chassis w/Power Chassis with two DC power for Redundant 48VDC
FMUX01A/Plus - E1/BNC Card 4 x G.703 E1 BNC interface card
FMUX01A/Plus - E1/RJ45 Card 4 x G.703 E1 RJ-45 interface card
FMUX01A/Plus - T1/RJ45 Card 4 x G.703 T1 RJ-45 interface card
FMUX01A/Plus - T1/Wire Card 4 x G.703 T1 Wire-Wrap interface card
FMUX01A/Plus - E1/Wire Card 4 x G.703 E1 Wire-Wrap interface card
FMUX01A/Plus - V35 Card V35 interface card with one HD68M to 4 x MB34F cable
FMUX01A/Plus - 530 Card RS-530 interface card with one HD68M to 4 x DB25F cable
FMUX01A/Plus - 449 Card RS-449 interface card with one HD68M to 4 x DB37F cable
FMUX01A/plus - X21 Card X.21 interface card with one HD68M to 4 x DB15F cable
FMUX01A/Plus - 232/Async Card RS-232 Async card with one HD68M to 4 x DB9F cable
FMUX01A/Plus - FXO Card 4 x FXO interface card
FMUX01A/plus - FXS Card 4 x FXS interface card
FMUX01A/Plus - EXT/CLK Card External Clock interface card
FMUX01A/Plus - SC002 Card SC, MM, 2Km, 1310nm, 11dB
FMUX01A/Plus - FC002 Card FC, MM, 2Km, 1310nm, 11dB
FMUX01A/Plus - ST002 Card ST, MM, 2Km, 1310nm, 11dB
FMUX01A/Plus - SC015 Card SC, 15Km, 1310nm
FMUX01A/Plus - FC015 Card SC, 15Km, 1310nm
FMUX01A/Plus - ST015 Card ST, 15Km, 1310nm
FMUX01A/Plus - SC030 Card SC, 30Km, 1310nm
FMUX01A/Plus - FC030 Card FC, 30Km, 1310nm
FMUX01A/Plus - ST030 Card ST, 30Km, 1310nm
FMUX01A/Plus - SC050 Card SC, 50Km, 1310nm
FMUX01A/Plus - FC050 Card FC, 50Km, 1310nm
FMUX01A/Plus - ST050 Card ST, 50Km, 1310nm
FMUX01A/Plus - SC080 Card SC, 80Km, 1550nm
FMUX01A/Plus - FC080 Card FC, 80Km, 1550nm
FMUX01A/Plus - ST080 Card ST, 80Km, 1550nm
FMUX01A/Plus - SC120 Card SC, 120Km,1550nm
FMUX01A/Plus - FC120 Card FC, 120Km, 1550nm
FMUX01A/Plus - ST120 Card ST, 120Km, 1550nm
FMUX01A/Plus - SC20A Card SC, 20km, Tx1310/Rx1550nm (A type)
FMUX01A/Plus - SC20B Card SC, 20km, Tx1550/Rx1310nm (B type)
FMUX01A/Plus - SC40A Card SC, 40km, Tx1310/Rx1550nm (A type)
FMUX01A/Plus - SC40B Card SC, 40km, Tx1550/Rx1310nm (B type)
FMUX01A/Plus - SC60A Card SC, 60km, Tx1310/Rx1550nm (A type)
FMUX01A/Plus - SC60B Card SC, 60km, Tx1550/Rx1310nm (B type)
FMUX01A/Plus - SC80A Card SC, 80km, Tx1310/Rx1550nm (A type)
FMUX01A/Plus - SC80B Card SC, 80km, Tx1550/Rx1310nm (B type)

Power Connector Distance

Power Type Card Type Redundant Type Connectivity
Type
FMUX01A / Plus – – – –
Example: FMUX01A / Plus – AC – AAAA – S – SC002

Power Module Fiber Redundant Connector

Line Card l/F Type Distance Connectivity
Type Type Type
AC, DC, AC2, O : Empty G : Single port Fast Ethernet 10/100 S: standard SC, S T , FC 002: 2km 20A: 20km
DC2, AD A : Quad E1 BNC H : Quad X.21 R: redundant 030: 30km 20B: 20km
B : Quad E1 RJ-45 I : Quad RS-449 050: 50km 40A: 40km
C : Quad T1 RJ-45 J : Wire-Wrap I/F for Quad E1/ T1 080: 80km 40B: 40km
D : Quad V.35 K : Quad High-Speed V.35 120: 120km 60A: 60km
E : Quad RS-232 L : Quad High-Speed RS-530 60B: 60km
F : Quad RS-530

1-101 FMUX01A / Plus CTC UNION TECHNOLOGIES CO., LTD. www.ctcu.com