Scribd
Upload
672 views4 pages

JSS1 Basic Tech Exam

The document contains a 30 question multiple choice exam on basic technology for JSS1 students. The questions cover topics like building materials, technical drawing tools, safety measures in workshops, properties of materials like wood and metals, and definitions of basic technology terms. The theory section asks students to define key concepts like building materials and components, list technical drawing tools and their uses, and explain what a blueprint is.

Uploaded by

temiodunaike7
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
672 views4 pages

JSS1 Basic Tech Exam

The document contains a 30 question multiple choice exam on basic technology for JSS1 students. The questions cover topics like building materials, technical drawing tools, safety measures in workshops, properties of materials like wood and metals, and definitions of basic technology terms. The theory section asks students to define key concepts like building materials and components, list technical drawing tools and their uses, and explain what a blueprint is.

Uploaded by

temiodunaike7
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

SECOND TERM JSS1 BASIC TECHNOLOGY EXAMINATION QUESTIONS

Subject: BASIC TECHNOLOGY Duration: 2HRClass: JSS 1

OBJECTIVE

1. ___ is any type of structure that has a roof and walls


a. Lorry
b. Bus
c. Building
2. ___ is the type of house built completely on one level (e.g. ground)
a. High-rise
b. Bungalow
c. Semi-detached duplex
3. ___ is used as the binding agent in concrete, block molding and plastering
a. Sand
b. Cement
c. Ceramic
4. ___ is used for drawing horizontal lines and supporting set squares
a. Tee square
b. Drawing board
c. Protractor
5. The tee square consists of two parts namely the stock and ___
a. The bottom
b. The saw
c. The blade
6. We have 300 – 600 set square and ___
a. 450 set square
b. 150 set square
c. 1000 set square
7. The protractor is used to measure angles between 0 and ___
a. 320
b. 1800
c. 900
8. French curves are used to draw ___ curved lines
a. Regular
b. Irregular
c. Straight
9. ___ is used to transfer measurement from one part of the drawing to another
a. Divider
b. Compass
c. Steel rule
10. ___ is drawn to identify drawings
a. Title block
b. Rectangles
c. Circle
11. ___ contains name, school, class and date
a. Title book
b. Title block
c. Box name
12. The following are products of technology found in schools except
a. Calculator
b. Bulldozer
c. Computer
13. Mixture of sand, cement, gravel with water is called
a. Concrete
b. Allow
c. Ceramics
14. ___ can be defined as a room or building in which things are made, repaired and
maintained.
a. Workshop
b. Sitting room
c. House
15. ___ is the measure taken in the workshop to prevent danger and injury
a. Accident
b. Safety
c. Sewing
16. The following are the operations performed in the workshop except
a. Construction
b. Repair
c. Surgery
17. Wood can be classified into ___ and ___
a. Hard and wet wood
b. Soft and wet wood
c. Hard and soft wood
18. ___ are iron buckets painted red and loaded with sand for putting out small fire
a. Alarm buckets
b. Sand bucket
c. Chemical buckets
19. ___ can be defined as technical language used for describing things with the aid of
drawing
a. Technical drawing
b. Drawing board
c. Drawing instruments
20. ___ is used for determining angle at various degrees
a. Caliper
b. Protractor
c. Steel lapel
21. Any material used for building is called a ___
a. Instruments
b. Building material
c. Contractor tools
22. All of the following are materials for building except?
a. Metals
b. Air
c. Leaves
23. Lettering is the art of writing letters and numbers in ___/___ form on drawing
a. Bold/lower
b. Alpha/beta
c. Fine/ugly
24. Technical drawing is a universal language used to ___ among technical people
a. Have fun
b. Transmit
c. Communicate
25. Which tool is used to measure the length of an object?
a. Ruler
b. Stopwatch
c. Thermometer
26. The table on which wood worker perform their operation is called
a. Construction table
b. Workbench
c. Workshop table
27. Who is a pedestrian?
a. A driver
b. Somebody walking along the road or street
c. Cyclist
28. ___ is obtained when two or more different metals are mixed together
a. Alloy
b. Ferrous
c. Non-ferrous
29. ___ are called deciduous wood
a. Softwood
b. Wetwood
c. Hardwood
30. Any harm or injury that is done to a student in the workshop or anywhere is called ___
a. Sprain
b. Attack
c. Accident

THEORY

Answer only four questions

1a) Mention Five different types of building materials and explain their uses

1b) What is free hand sketching

2a) Explain the uses of the following drawing instrument

I. Set square
II. Protractor
III. Divider
IV. Compass
V. French curve

2b) List 2 things that can be sketched using freehand

3a) What is a blue print

3b) What are building materials

4a) List 5 instruments used for technical drawing

4b) What are building components\

5a) List all the building components

5b) List 4 different paper sizes and their measurement

You might also like