Scribd
Upload
188 views

How To Install Arduino IDE and Driver (CH340G)

This document provides instructions for installing the Arduino IDE software on Windows, Mac, and Linux operating systems. It involves downloading the IDE software from the Arduino website that matches your operating system. For Windows, it guides the user to click through installation screens to complete the download and installation. It also provides instructions for installing the CH340G USB driver, which is needed for the Arduino Nano board to be recognized properly on Windows systems. This involves navigating Windows device manager and browsing to select the CH340G driver file during the update process.

Uploaded by

ALVIN PAJO
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
188 views

How To Install Arduino IDE and Driver (CH340G)

This document provides instructions for installing the Arduino IDE software on Windows, Mac, and Linux operating systems. It involves downloading the IDE software from the Arduino website that matches your operating system. For Windows, it guides the user to click through installation screens to complete the download and installation. It also provides instructions for installing the CH340G USB driver, which is needed for the Arduino Nano board to be recognized properly on Windows systems. This involves navigating Windows device manager and browsing to select the CH340G driver file during the update process.

Uploaded by

ALVIN PAJO
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 15

How to Install Arduino IDE

Introduction
The Arduino Integrated Development Environment (IDE) is the software side of the Arduino platform.In this Project, you
will learn how to setup your computer to use Arduino and how to set about the Projects that follow.The Arduino software
that you will use to program your Arduino is available for Windows, Mac and Linux. The installation process is different for
all three platforms and unfortunately there is a certain amount of manual work to install the software.

STEP 1: Go to https://www.arduino.cc/en/Main/Software and find below page.

The version available at this website is usually the latest version, and the actual version may be newer than the
version in the picture.
STEP2：Download the development software that is compatible with the operating system of your computer.
Take Windows as an example here.
Click Windows Installer.
Click JUST DOWNLOAD.
Also version 1.8.0 is available in the material we provided, and the versions of our
materials are the latest versions when this course was made.
Installing Arduino (Windows)
Install Arduino with the exe. Installation package.

Click I Agree to see the following interface


Click Next
You can press Browse… to choose an installation path or directly type in the directory you want.
Click Install to initiate installation
Wait for the installing process, if appear the interface of Window Security, just continue to click
Install to finish the installation.

Next, the following icon appears on the desktop


Double-click to enter the desired development environmen
How to Install CH340G Driver
The USB to serial port chip of this control board is CH340G. So you need to install the driver for the chip. You can click
the driver file here.
In different systems, the driver installation is similar. Here we start to install the driver on the Win7 system.You can find the
“USB_Drive_CH341_3_1” folder in the information we provide, this is the driver file we want to install.
Plug one end of your USB cable into the NANO ch340 board and the other into a USB socket on your computer.
When you connect the Nano/UNO CH340 board to your computer at the first time, right click your “My Computer”—>for
“Properties”—>click the “Device manager”, under Other devices, you should see the “USB-Serial”or “Unknown device
”.Or you can search for "devi" in your computer, or you can open the device manager of your computer.
Then right-click on the device and select the top menu option (Update Driver Software...) shown as the figure below.
Then it will be prompted to either “Search Automatically forupdated driversoftware” or “Browse my computer for driver
software”. Shown as below. In this page, select “Browse my computer for driver software”.
After that, select the browse option and navigate to the drive folder "USB_Drive_CH341_3_1", which can be found in the
information we provide.
Once the software has been installed, you will get a confirmation message. Installation completed, click “Close”.
Up to now, the driver is installed well. Then you can right click “My Computer”—>for “Properties”—>click the “Device
manager”, you should see the device as the figure shown below. Or you can search for "devi" in your computer, or you can
open the device manager of your computer.

You might also like