Scribd
Upload
280 views

CrackWidth Flexure

This document provides calculations of crack width in concrete for a structural element called SLAB-S1 according to Indian standards. It includes details of the concrete grade, steel properties, section geometry, reinforcement details, and applied load. The calculations determine parameters like neutral axis depth, steel and concrete stresses, and design surface crack width according to different criteria in the standards. The crack width is estimated to be 0.17968 mm based on two cases in the standards.

Uploaded by

Sahil Oza
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
280 views

CrackWidth Flexure

This document provides calculations of crack width in concrete for a structural element called SLAB-S1 according to Indian standards. It includes details of the concrete grade, steel properties, section geometry, reinforcement details, and applied load. The calculations determine parameters like neutral axis depth, steel and concrete stresses, and design surface crack width according to different criteria in the standards. The crack width is estimated to be 0.17968 mm based on two cases in the standards.

Uploaded by

Sahil Oza
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Company's Name: ABC Consultants Job No.

:
101, Known Street, Known Area, Known City, Pin …. Design by:
Client: Very Important Industries Ltd, Well Known City Date:
Project: XYZ Building Page No.
SPREADSHEET OF CALCULATIONS OF CRACK WIDTH IN CONCRETE IN FLEXURE
AS PER IS:456-2000 AND IS 3370 (PART 2) : 2009
Calculates crack width in concrete for a given section with details of concrete grade, type of Steel, and applied load

Structural Element Mark SLAB-S1


Characteristic cube strength of Concrete, f ck M 3
Yield Strength of Steel, fy = 3 N/mm2
Modulus Elasticity of Concrete Ec = 5000 x SQRT( f ck ) = 2.50E+04 N/mm2
Modulus Elasticity of Steel Es = 2.00E+05 N/mm2
Modular Ratio, m, Es/Ec = 8.000

Case: FLEXURE - Section Details of SLAB-S1 Effective depth, 'd', mm =


Breadth of Section, 'b', mm = 1000 ρ = Ast / bd =
Depth of Section, 'h', mm = 250 Neutral axis depth 'x', mm
Area of tension reinforcement, 'Ast', mm2 = 2093 'acr', mm =
Bar diameter, mm = 20 'Z', mm =
Maximum bar spacing, 'S', mm = 150 Steel Stress, 'fs', N/mm2=
Cover to tension reinforcement, mm = 40 Concrete Stress,'fc',N/mm2=
Applied Moment at service condn., 'M', kNm = 69.00 Distance 'a', mm

Strain at the level considered, 'ε1' = 0.001276


Average Steel Strain at the level considered, 'εm' = 0.001075
Design surface crack width, 'Wcr', mm :
Case: Ignoring stiffening of concrete in tension zone 0.17968 As per IS:456-2000
Case: Considering stiffening effect, 0.2mm limit crack width 0.17968 Ref: IS 3370 (Pt.2):200
Case: Considering stiffening effect, 0.1mm limit crack width > 0.1mm
ABC/1001
UVW
21-11-15
C/101
IN FLEXURE

Steel, and applied loads.

200
0.01047
66.79
80.14
177.74
185.48
11.62
250

RCDesignCD

You might also like