Jazz Pro Soundbar User Manual 06.10.2023
Jazz Pro Soundbar User Manual 06.10.2023
1 Channel Soundbar
User Manual
Important Safety Instructions
!WARNING:To reduce the risk of electric shock, do not dismantle the product and
do not expose the product to rain or moisture.No user-serviceable parts inside. Refer
servicing to qualified personnel only.
1.Read the user manual before use. Keep all instructions for future reference
2.Always operate the product from a power source of the same voltage, frequency
and rating as indicated on the rating label.
3. This product is intended for indoor,household use only.
4. To protect against electric shock: do not immerse unit,plug or cord in water or
spray with liquids; do not place unit on windowsills or other places where it may be
exposed to dripping or splashing of water; do not place vases or similar objects
filled with liquids near the unit.
5. Do not use this product in the immediate vicinity of water such as bathtubs,
washbowls, swimming pools etc. where the likelihood of immersion or splashing
occur.
6. Keep the unit away from heat sources like radiators, heat registers, stoves or other
products that produce heat. No open flame sources like candles should be placed
on the unit.
7. Use only with attachments/accessories specified by the manufacturer.Use of
attachments/accessories not recommended can be hazardous.
8. This appliance is not intended for use by persons (including children) with reduced
physical,sensory or mental capabilities,or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
9. This product is not a toy!Children should be supervised to ensure that they do not
play with the appliance.
10. Do not cover the unit during use. Do not impede ventilation by covering ventilation
openings with cloths, curtains or similar items.
11. Do not operate the product with a damaged cord or plug or if the product
malfunctions, or is dropped or damaged in any manner.
12. lf the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid hazard.
13. For safety reasons, do not remove any covers or attempt to access the inside of
the product.
14. Do not clean the unit with any harsh chemicals as this might damage the finish.
Wipe clean with a dry cloth.
15. When removing the power plug from the wall outlet, always pull directly on the
plug;never pull on the cord.
16. Do not expose the batteries to excessive heat, direct sunlight, fire or similar.
17.Do not throw used batteries in your household rubbish.Dispose of it responsibly
according to your local authority guidelines.
.
1
Remote Control Description
Using the remote control:
1.POWER
Press this button to power on or 1
power off.
2.MODE
Press this button to switch the 2 8
mode within Bluetooth, USB,
Aux-in,HD-in (ARC-in) and 3 9
Optical-in.
3.VOL+ 4 10
Press VOL+ to up the volume
of the soundbar 11
4
12
Under Bluetooth and USB mode,
5
press this button will go to 13
previous song.
5. MOVIE 6 14
Press this button will enter
MOVIE mode sound effect.
6. PAIR 7
Under Bluetooth mode, press this
button will disconnect the connection
between soundbar and sound
sourcing device(such as your mobile
phone), press this button will
reconnect the previous sourcing
device again.
7.RESET
Press this button will resume the
factory sound setting.
8.MUTE
Under work mode, press this
button to turn off sound of
soundbar, press it again to turn 12.MUSIC
on the sound. Press this button will enter
9. MUSIC mode sound effect.
When playing music, press 13.NEWS
this button to pause playing, Press this button will enter
and repress to NEWS mode sound effect.
play continue
14.BASS
10.
Press the BASS key, and then
Under Bluetooth and USB
mode, press this button will press volume up or volume
go to next song. down to adjust the amplitude
11. VOL- of the bass.
Press VOL- to down the volume
of the soundbar.
2
Front/Back panels
FRONT
1.POWER/MODE
Long press this button to power on or power off
Short press this button to change mode
2.
Press to up the
increase the volumeof the
soundbar
3.
Press to decrease the volume of the soundbar. 1 2 3 4
4.AUX
After switching on the soundbar, change to AUX input mode. Plug in the 3.5mm
AUX cable to the AUX IN connector on the soundbar and start playing from the
music device
BACK
1 2 3 4
1.USB
2.HD/ARC
3.OPTICAL
4.SW. OUT USB HD/ARC OPTICAL SW - OUT
3
Connection schematic
Connecting the soundbar to the TV
1. Connect the subwoofer to the SW-OUT port of the soundbar.
2. Connect the soundbar to your TV using the HDMI ARC (Audio Return Channel),
optical audio cable, or Bluetooth, depending on the model and your TV's capabilities.
Note: Alternatively,you can use the AUX cable (included) to connect the 'AUX-IN'
port on the soundbar to the Auxiliary out or the Headphone jack on the TV.
SOUNDBAR
REAR PANEL
USB HD/ARC OPTICAL SW - OUT
HD
HD HD
cable-(not included) (ARC)
Subwoofer
4
Connecting the soundbar to other devices
1. Plug one end of the optical cable into the optical output port of devices (blu-ray/DVD
player, gaming consoles) and insert the other end of the optical cable into the optical
input port on your soundbar.
2. Other audio sources:Connect with Bluetooth/AUX-IN.
OPTICAL
VIDEO
Bluetooth
pTron BT speaker
Bluetooth
FRONT PANEL
5
Operating Instructions:
Connect the sound bar power plug to the AC power socket, and then press the
power key of the soundbar. The display glows with a prompt voice, which means
that it has successfully powered on. Long-press the Power/Mode button on the
side panel or the Mode key on the remote control to choose the required mode.
Bluetooth connection:
1.Press the 'MODE’ button repeatedly until Blue-Connect Mode is selected.
Display shows 'BL'
2.On your Bluetooth-enabled device chose ‘pTron BT Speaker’ the name of the
soundbar. The display blinks indicating that it is waiting for pairing, once paring
is successful, the indicator remains on, display shows 'BL’ and stop flashing.
3. Now you can play music from your Bluetooth-enabled device on the sound bar.
Press the or button on the remote control to play the previous or next song.
Aux Input
If using the Aux cable connect the Speaker to audio equipment, select 'AU’ by using
the Mode key on the remote control or the Power/Mode key on the side panel. 'AU'
will be displayed on the display accompanied by 'AUX' voice prompt.
HD/ARC Input
If using HDMI cable connect Speaker to audio equipment, through the mode button
on the remote control or the Power/Mode key on the side plate to select 'HD’, screen
displays 'HD’ accompanied by 'HD’ voice prompt.
OPTICAL Input
If using OPTICAL cable to connect speaker, through the mode button on the remote
control or the Power/Mode key on the side plate to select 'OPTICAL’, screen displays
'OPTICAL’ accompanied by 'OPTICAL’ prompt.
6
Connection schematic
RECOMMENDED PLACEMENT
Disclaimer: The color and specifications shown in or mentioned in the user manual
may differ from the actual product. Images shown are for representation purposes only.
Other product logos and company names mentioned herein may be trademarks or trade
names of their respective owners.