M65.20A Flier Tech Sheet New 1
M65.20A Flier Tech Sheet New 1
M65.20A Flier Tech Sheet New 1
com
S PE C I FI CAT I ONS
T E C HN I CA L DATA M65.20A1 M65.20A2 M65.20A3
Gross Lifting Moment kNm 61.13 59 57.1
Maximum Lifting
kNm 83.7 83.7 83.7
Dynamic Moment
Max Hydraulic
m 5.5 7.2 8.9
Horizontal Outreach
Slewing Angle ° 422 422 422
Max Rotational Torque kNm 16.24 16.24 16.24
Recommended
L 50 50 50
Volume of Oil in Tank
Max Working Oil Pressure bar 230 230 230
Recommended
L/min 25 25 25
Pump Delivery
Electrical Power
kW/CV 9.6 9.6 9.6
Requirement
Mass of Standard Crane kg 900 990 1070
M O UN T I N G BAS E I N STA L L AT I O N
Quantity of Bolts Required 12
Thread Pitch and Class M24 Class 8.8
STA N DA R D F E AT UR E S
• Built according to DIN 15018-H1-B3 standards.
• Crane structure is sandblasted and metallized.
• Double coat of primer and two layers of paint.
• Special cylinders with Ni-Cr piston rods for marine environments.
Female fittings in stainless steel, and male fittings in carbon steel. Stain-
less steel hydraulic installation pipes.
• Hoses with rubber “type A” double coat.
• Wheel-rack slewing system, via cylinders, with bronze bushings. Safety
valves on the cylinders.
• Hydraulic load limiter.
M65.20A MARINE CRANE • Emergency stop button.
O P T I O N A L F E AT U R E S
• Hydraulic winch
LOA D CHA RT • Manual extensions
M65.20A1
• Remote control
• Auxiliary hydraulic intakes
• Cab
2500 Kg 1600 Kg 1095Kg
2.5 m 3.9 m 5.4 m
5111 lbs 3257 lbs 24414 lbs
8’ 2-7/16” 12’ 9-1/2” 17’ 8-9/16”
M65.20A2 M65.20A3