293 Egatube® Conduit

CONDUIT AND MINI www.mkelectric.co.uk

Egatube Super
Round High Impact
Conduit Conduit
Heavy Gauge
3 METRE LENGTHS
BLK OR WHI

Manufactured in
accordance with
BS.4607 and
BS.6099.
STANDARD LENGTH:
3 metres.
MATERIAL:
PVCu

16mm HIP/1 90m

20mm HIP/2 90m

25mm HIP/3 90m

32mm HIP/4 30m

38mm HIP/5 BLK 30m

50mm HIP/6 BLK 30m

Wall thickness (nominal mm)

HIP/1 1.7 HIP/4 2.5
HIP/2 1.8 HIP/5 2.5
HIP/3 1.9 HIP/6 3.2

Normal
Bends
Egatube high impact PVCu conduit
offers a cost effective solution for HEAVY GAUGE
FITTED WITH

both new building and refurbishment TWO COUPLINGS

BLK OR WHI

contracts. Where there is a choice

of colour state the
appropriate suffix with
the list number when
The wide range of fittings and ancillary products means that almost any ordering e.g. HIP/2 BLK
For 16mm sizes use
installation can be specified with confidence. 20mm fittings with
reducers. (Ref. ER/1).

● Wide range of sections and sizes 16mm

● Oval, round and corrugated sections are compatible 20mm ENB/2 25

25mm ENB/3 10
● Simple and fast installation
32mm ENB/4 5
● Very wide range of components maximises versatility of application 2
38mm ENB/5
● Very durable and impact resistant 50mm ENB/6 2

● 3 grades of round conduit to suit various site conditions

 Egatube Conduit 294

TECHNICAL HOTLINE +44 (0)1268 563720 CONDUIT AND MINI

Super Medium Heavy Gauge Expansion Inspection

High Impact Impact Coupling Coupling Coupling
Conduit Conduit
Light Gauge Heavy Gauge
2.9 METRE
3 METRE LENGTHS 3 METRE LENGTHS LENGTHS
WHITE BLACK (NON UK) BLK OR WHI BLK OR WHI BLK OR WHI

HLG/1 90m ESP/1 90m ESC/1 50 EEC/1 25

HLG/2 90m ESP/2 90m 3/ESP/2 145m ESC/2 100 EEC/2 25 EIS/2 25

HLG/3 90m ESP/3 90m 3/ESP/3 116m ESC/3 50 EEC/3 25 EIS/3 25

HLG/4 30m ESP/4 30m 3/ESP/4 58m ESC/4 50 EEC/4 10 *

HLG/5 30m ESP/5 30m 3/ESP/5 29m ESC/5 25 EEC/5 10 *
HLG/6 30m ESP/6 30m 3/ESP/6 29m ESC/6 20 EEC/6 10 *

Wall thickness (nominal mm) Wall thickness (nominal mm) 3/ESP is available in 2.9 metre *For 32/38/50mm use square
HLG/1 1.1 HLG/4 1.5 ESP/1 1.7 ESP/4 2.5 lengths for NON UK markets. junction boxes (ERB page 298)
HLG/2 1.2 HLG/5 1.5 ESP/2 1.8 ESP/5 2.5
HLG/3 1.5 HLG/6 1.8 ESP/3 1.9 ESP/6 3.2

Spacer Bar Spring Clip Strap Quickfit Conduit

Saddle Saddle Saddle Spacer Clip
Saddle
LIGHT GAUGE
COUPLINGS NOT
REQUIRED
WHITE BLK OR WHI BLK OR WHI BLK OR WHI BLK OR WHI BLK OR WHI

LNB/1 25 ESB/1 50 ES/1 100 ECC/1 50

LNB/2 100 ESB/2 100 MEC/2 100 ES/2 100 EQS/2 100 ECC/2 50

LNB/3 50 ESB/3 100 MEC/3 50 ES/3 100 EQS/3 100 ECC/3 50

LNB/4 50 ESB/4 50 MEC/4 25 ES/4 50 ECC/4 50

LNB/5 25 ESB/5 25 ES/5 50 ECC/5 WHI 50

LNB/6 25 ESB/6 25 ES/6 50

 295 Egatube Conduit
CONDUIT AND MINI www.mkelectric.co.uk

Inspection Quick Fit Inspection Quick Fit Tee Inspection

Elbow Inspection Tee Bend
Elbow

BLK OR WHI BLK OR WHI BLK OR WHI BLK OR WHI BLK OR WHI

16mm
20mm EIE/2 25 EQE/2 25 EIT/2 25 EQT/2 25 EIB/2 25

25mm EIT/3 25 EQT/3 25 EIB/3 25

32mm
38mm
50mm

Compression Adaptor Adaptor Clip-in Bell Mouth

Gland Male Female Thread Adaptor Bush
Thread WITH LOCK
RINGS
PLAIN PUSH IN *20MM MALE
#WITH LOCK RING WITH MALE THREAD WITH
BLACK BUSHES 16MM ENTRY
(*BLK OR WHI) BLK OR WHI BLK OR WHI WHITE WHITE

16mm ECG/1 7–10.5 50 EMA/1* 50 0 0

20mm ECG/2* 7–10.5 100 EMA/2 100 EFA/2 100 CEA/2 50 BMB/2 50

25mm ECG/3 8–13 50 EMA/3 50 EFA/3 50

32mm ECG/4# 18–24.5 50 EMA/4 25 EFA/4 25

38mm EMA/5 25 EFA/5 25

50mm EMA/6 10 EFA/6 10

 Egatube Conduit 296

TECHNICAL HOTLINE +44 (0)1268 563720 CONDUIT AND MINI

Quick Fit Plug Plug Locknut Lockring Reducer

Inspection Plain Screwed
Bend

BLK OR WHI BLK OR WHI BLK OR WHI GREY BLK OR WHI BLK OR WHI

EHL/1 100 0 00
EQB/2 25 EP/2 100 EP/2/S 100 EHL/2 100 ECL/2 100 ER/1 20 x 16 50

EQB/3 25 EP/3 100 EP/3/S 100 EHL/3 100 ECL/3 100 ER/2 25 x 20 50

EHL/4 50 ECL/4 50 ER/3 32 x 25 25

EHL/5 25 ECL/5 25 ER/5 38 x 32 10

EHL/6 25 ECL/6 25 ER/7 50 x 38 10

Sleeve for Bell Male Male Female Bending

Mouth Bush Bush Bush Bush Springs
Plain Screwed Screwed
GREEN
HEAVY GAUGE RED
FOR HIP LIGHT GAUGE
WHITE BLK OR WHI BLACK BLACK AND ESP FOR HLG

BMS/2 50 MPB/2 100 SMB/2 50 EBF/2 100 ESS/2 1 ELS/2 1

MPB/3 100 SMB/3 50 EBF/3 100 ESS/3 1 ELS/3 1

SMB/4 50 EBF/4 50

SMB/5 25 EBF/5 50

SMB/6 25
 297 Egatube Boxes
CONDUIT AND MINI www.mkelectric.co.uk

Circular Boxes Terminal Boxes Through Boxes Branch Boxes Angle Boxes

BLK OR WHI BLK OR WHI BLK OR WHI BLK OR WHI BLK OR WHI

2/ECR/13/EL 2/ECR/2 2/ECR/3 2/ECR/17

2/ECR/4

2/ECR/1 2/ECR/7 2/ECR/8

2/ECR/18
2/ECR/9

ECR/12/EL

2/ECR/19

2/ECR/13 20 2/ECR/2 20 2/ECR/3 20 2/ECR/17 20 2/ECR/4 20

*2/ECR/13/EL 20 *2/ECR/2/EL 20 *2/ECR/3/EL 20 20mm ‘U’ TWO WAY *2/ECR/4/EL 20
20mm LOOP-IN 20mm ONE WAY 20mm TWO WAY 20 20mm TWO WAY
2/ECR/18
2/ECR/1 20 3/ECR/2 10 3/ECR/3 10 20mm ‘Y’ THREE WAY 3/ECR/4 10
*2/ECR/1/EL 20 25mm ONE WAY 25mm TWO WAY 25mm TWO WAY
20mm BACK OUTLET 20 2/ECR/8 20
2/ECR/7 2/ECR/9 20
10 20 *2/ECR/8/EL 20
3/ECR/1 *2/ECR/7/EL *2/ECR/9/EL 20
20mm ONE WAY AND 20mm TWO WAY AND
25mm BACK OUTLET 20mm TWO WAY AND
BACK OUTLET BACK OUTLET
BACK OUTLET
ECR/12 10 10
10 3/ECR/8
*ECR/12/EL 10 3/ECR/7 25mm TWO WAY AND 3/ECR/9 10
NO SPOUT 25mm ONE WAY AND 25mm TWO WAY AND
BACK OUTLET
BACK OUTLET BACK OUTLET
2/ECR/19 20
*Fixed external lugs 20mm ‘H’ OR TWIN
20mm Loop-in boxes have THROUGH WAY
4 x 20mm knockouts on underside
*Swivel lug. *Swivel lug. *Swivel lug

ALL CIRCULAR BOXES

MATERIAL: PVCu For 16mm sizes use 20mm fittings with LOAD SUSPENSION
reducers. Standard circular box:
LID FIXING CENTRES: (Ref. ER/1) 3kg. @ 60ºC max.
50.8mm
Some circular boxes are available with Extended Lug Box:
PILLAR THREAD SIZE: extended lugs for the support of heavy 10kg. @ 60ºC max.
M4 (Brass inserts) loads. For enclosed lighting
All boxes contain a moulded fittings see 'Heat
recess for earth terminal Resistant Box' on
Available in Black or White. p.80 or use 'Steel
When ordering use colour suffix Insert Clips' on p.81
BLK or WHI.
 Egatube Boxes 298

TECHNICAL HOTLINE +44 (0)1268 563720 CONDUIT AND MINI

Tee Boxes Intersection Tangent Boxes Square Junction Boxes

Boxes

BLK OR WHI BLK OR WHI BLK OR WHI BLK OR WHI

ERB/2
3/ECR/5
3/ECR/6
3/ECR/14 ERB/11

3/ECR/10 ERB/5

3/ECR/11
ERB/14
3/ECR/15

ERB/8

2/ECR/5 20 2/ECR/6 20 2/ECR/14 20 ERB/1 10 ERB/9 1

*2/ECR/5/EL 20 *2/ECR/6/EL 20 20mm ANGLE 32mm THROUGH 50mm TEE
20mm THREE WAY 20mm FOUR WAY 10 ERB/2 10 ERB/10 5
3/ECR/14
3/ECR/5 10 3/ECR/6 10 25mm ANGLE 38mm THROUGH 32mm FOUR-WAY
25mm THREE WAY 25mm FOUR WAY ERB/3 2 ERB/11 4
2/ECR/15 20
20 20 50mm THROUGH 38mm FOUR-WAY
2/ECR/10 2/ECR/11 *2/ECR/15/EL 20
20mm THREE WAY AND 20mm FOUR WAY AND ERB/4 10 ERB/12 1
20mm TEE
BACK OUTLET BACK OUTLET 32mm ANGLE 50mm FOUR-WAY
3/ECR/15 10
3/ECR/10 10 3/ECR/11 10 ERB/5 10 ERB/13 10
25mm TEE
25mm THREE WAY AND 25mm FOUR WAY AND 38mm ANGLE 32mm TERMINAL
BACK OUTLET BACK OUTLET ERB/6 2 ERB/14 10
50mm ANGLE 38mm TERMINAL
*Swivel lug *Swivel lug *Swivel lug ERB/7 5 ERB/15 2
32mm TEE 50mm TERMINAL
ERB/8 5
38mm TEE
Available in Black or White.
When ordering use colour suffix
ALL CIRCULAR BOXES BLK or WHI.
MATERIAL: PVCu For 16mm sizes use 20mm fittings with LOAD SUSPENSION
reducers. Standard circular box: MATERIAL: PVCu
LID FIXING CENTRES: (Ref. ER/1) 3kg. @ 60ºC max. Square Junction Boxes are designed
50.8mm
Some circular boxes are available with Extended Lug Box: to enable interconnection and
PILLAR THREAD SIZE: 10kg. @ 60ºC max. directional changes of 32mm,
extended lugs for the support of heavy 38mm and 50mm circular conduits.
M4 (Brass inserts) loads. For enclosed lighting fittings see 'Heat
All boxes contain a moulded Resistant Box' on p.80 or use 'Steel BOX SIZES
recess for earth terminal Available in Black or White. Insert Clips' on p.81 ERB/1,2,4,5,7,8,10,11,13,14
When ordering use colour suffix 75 x 75mm
BLK or WHI.
ERB/3,6,9,12,15
100 x 100mm
 299 Egatube Accessories
CONDUIT AND MINI www.mkelectric.co.uk

Adaptable Heat-Resistant Earth Circular Lids

Boxes Boxes Electrode Box Gaskets
and Screws

BLK OR WHI

2/ECR/25
MAB/1 EL/1

EEB/1
MAB/4

MAB/2
2/ECR/26
EL/2
MAB/5

MAB/3 MAB/6 EL/3

MAB/1 5 MAB/5 5 2/ECR/25 BLK 10 EEB/1 BLK 5 EL/1 100

EXTERNAL SIZE INTERNAL SIZE 20mm FLAT BASED WITH 75 x 75 x 70mm LIDS 66mm DIA
75 x 75 x 41mm 150 x 75 x 50mm 20mm CUT-OUTS FOR
EL/2 50
CONDUIT ENTRY
MAB/2 5 MAB/6 5 OVERLAPPING LIDS
EXTERNAL SIZE INTERNAL SIZE 2/ECR/26 BLK 10 85mm DIA
75 x 75 x 53mm 150 x 100 x 50mm 20mm FOUR SPOUT
EL/3 BLK 50
'LOOP-IN' PATTERN
MAB/3 5 MAB/7 2 RUBBER GASKETS
INTERNAL SIZE INTERNAL SIZE 66mm DIA
100 x 100 x 50mm 150 x 150 x 75mm
M4X10SS 100
MAB/4 5 MAB/8 2 SCREWS FOR
INTERNAL SIZE INTERNAL SIZE CIRCULAR BOXES
100 x 100 x 75mm 225 x 225 x 75mm

Available in Black or White Available in Black only. Available in Black only. EL1/EL2
Available in Black or White
When ordering use colour suffix BLK MATERIAL: Noryl/PVCu MATERIAL: PVCu
or WHI When ordering use colour suffix BLK
LID FIXING CENTRES: The Egatube Earth Electrode Box is or WHI.
MATERIAL: PVCu 50.8mm to protect the connection to an
PILLAR THREAD SIZE: earth electrode. EL/3 is available in Black only.
Note: Boxes are not IP Rated M4 (metal inserts)
MATERIAL:
LOAD SUSPENSION: EL/1 and EL/2: PVCu
10kg. @ 100ºC max. EL/3: Rubber
All Heat Resistant Boxes include LID FIXING CENTRES:
keying facility 50.8mm
2/ECR/26 boxes are fitted with
spout plugs and extra adaptors are
not required.
 Egatube Accessories 300

TECHNICAL HOTLINE +44 (0)1268 563720 CONDUIT AND MINI

Extension Rings Pendant Accessories Sundries

Dome Cover

BLK OR WHI BLK OR WHI

SIC

EER/3 EDC/1
BET/1
EW/1A ECT/1

BET/2

EER/6

EW/2 DRA/10

EER/7

EER/3 25 EDC/1 25 SIC 100 EW/1A 1 ECT/1 1

NOM DEPTH 12.5mm PENDANT DOME COVER STEEL INSERT CLIP EGAWELD NO 1 EGASNIP CUTTING TOOL
25 0.25 LITRE
EER/5 BET/1 50 DRA/10 1
NOM DEPTH 19mm BRASS EARTHING EW/2 1 NYLON DRAW TAPE
EER/6 25 TERMINALS EGAWELD NO.2 10m LENGTH
NOM DEPTH 25mm 5 AMP 0.25 LITRE
DRA/20 1
EER/7 25 BET/2 50 EW/3 1 NYLON DRAW TAPE
NOM DEPTH 32mm BRASS EARTHING EGAWELD NO.3 20m LENGTH
TERMINALS 0.25 LITRE
EER/8 25
15 AMP
NOM DEPTH 38mm
EER/9 25
NOM DEPTH 50mm
Available in Black or White Available in Black or White Steel Insert Clip Egaweld 1, 2 & 3 are specially Egasnip is a cutting tool which
Fits most Egatube circular boxes prepared waterproof adhesives for enables conduit and mini trunking
When ordering use colour suffix When ordering use colour suffix through base knock-outs. Provides use with PVC conduit, trunking and to be cut easily and precisely giving
BLK or WHI. BLK or WHI. additional support for heavy fittings. a clean finish with no swarf.
MATERIAL: PVCu FIXING CENTRES: pendants. Single handed operation.
Tapped M4 Egaweld No. 1 a vinyl solvent Two types of anvil.
50.8mm adhesive used for making
FIXING CENTRES: Note: Must be fitted before Replaceable blade
50.8mm To suit circular conduit boxes. installation of box. watertight joints with push-on (List No. BLADE).
20mm conduit female thread only. fittings. Accurate mitre capability.
To suit circular conduit boxes Brass Earthing Terminals
Fits standard circular boxes and Egaweld No. 2 an adhesive that Nylon Draw Tapes
EER/6-9 are fitted with slots to suit remains flexible although providing
Steel Insert Clips switch/socket boxes. An eyelet is fitted.
Supplied complete with screws. water resistant joints. It is ideal for
expansion couplings or where an
installation may have to be altered.
Egaweld No. 3 is a thixotropic
liquid used mainly as a trunking
adhesive.
COSSH information is available on
the MK website:
www.mkelectric.co.uk
 301 Egatube Accessory Boxes
CONDUIT MINI www.mkelectric.co.uk

Round Corner Square Corner

Accessory Boxes Accessory Boxes

16mm 25mm 35mm 25mm 25mm 32mm

PLASTER DEPTH
FLUSH FLUSH FLUSH SURFACE SURFACE SURFACE

ESU/6/1 ESU/9/ML ESU/8/ML ESU/24/1 ESU/26/1 ESU/28/1

ESU/9/2/ML ESU/8/2/ML ESU/24/2 ESU/26/2 ESU/28/2

ESU/6/1 25 ESU/9/ML 25 ESU/8/1 25 ESU/24/1 25 ESU/26/1 25 ESU/28/1 25

1 GANG 1 GANG 1 GANG 1 GANG 1 GANG 1 GANG
ONE FIXED PILLAR AND ADJUSTABLE LUGS FIXED LUGS
ESU/24/2 10 ESU/26/2 10 ESU/28/2 10
ONE ADJUSTABLE LUG
ESU/9/2/ML 10 ESU/8/ML 25 2 GANG 2 GANG 2 GANG
2 GANG 1 GANG
ADJUSTABLE LUGS ADJUSTABLE LUGS
ESU/8/2/ML 10
2 GANG
ADJUSTABLE LUGS

KNOCKOUTS: KNOCKOUTS: KNOCKOUTS: KNOCKOUTS: KNOCKOUTS: KNOCKOUTS:

One 16mm oval and 1 gang: 1 gang: 1 gang: ESU/26/1: 1 gang:
one 20mm oval Six 20mm round Eight 20mm round One 20mm round and One 20mm round One 20mm round
2 gang: 2 gang: one mini trunking entry ESU/26/2; 2 gang:
Seven 20mm round and Nine 20mm round and 2 gang; One 20mm round One 20mm round and
MATERIAL: one 25mm oval one 25mm oval One 20mm round and one mini trunking entry
PVCu three mini trunking entries MATERIAL:
MATERIAL: MATERIAL: PVCu MATERIAL:
DIMENSIONS: PVCu PVCu MATERIAL: PVCu
1 gang: 73 x 73mm PVCu DIMENSIONS:
DIMENSIONS: DIMENSIONS: 1 gang: 86 x 86mm DIMENSIONS:
FIXING CENTRES: 1 gang: 73 x 73mm 1 gang: 73 x 73mm DIMENSIONS: 2 gang: 86 x 146mm 1 gang: 86 x 86mm
1 gang: 60.3mm 2 gang: 73 x 134mm 2 gang: 73 x 134mm 1 gang: 86 x 86mm 2 gang: 86 x 146mm
2 gang: 86 x 146mm FIXING CENTRES:
BS.4662 and BS.1363 FIXING CENTRES: FIXING CENTRES: 1 gang: 60.3mm FIXING CENTRES:
where applicable 1 gang: 60.3mm 1 gang: 60.3mm FIXING CENTRES: 2 gang: 120.6mm 1 gang: 60.3mm
2 gang: 120.6mm 2 gang: 120.6mm 1 gang: 60.3mm 2 gang: 120.6mm
2 gang: 120.6mm BS.4662 and BS.1363
BS.4662 and BS.1363 BS.4662 and BS.1363 where applicable BS.4662 and BS.1363
where applicable where applicable BS.4662 and BS.1363 where applicable
where applicable
 Egatube Oval 302

TECHNICAL HOTLINE +44 (0)1268 563720 CONDUIT MINI

Oval Conduit Coupling Oval to

Round
Adaptor

3 METRE LENGTHS

Manufactured in accordance with 13mm EOC/1 150m

BS.4607 Part 5.
16mm EOC/2 150m CO/2 50
STANDARD LENGTH:
3 metres. 20mm EOC/3 150m CO/3 50 OA/3 50

MATERIAL: 25mm EOC/4 150m CO/4 50

PVCu
25mm EOC/5 150m
COLOUR:
White

Bellmouth Saddle External Normal

Bush Spring Clip Bends
Oval

FORWARD SIDE

16mm OS/2 100 XC/2 100 OFB/2 10 OSB/2 10

20mm BOB/3 50 OS/3 100 XC/3 100 OFB/3 10 OSB/3 10

25mm BOB/4 50 OS/4 100 XC/4 100

 303 Egaflex™
CONDUIT AND MINI www.mkelectric.co.uk

Egaflex™ Corrugated Adaptor

PVCu Nylon
Conduit

The Egaflex PVCu conduit range is a corrugated

flexible system which can be used for the
connection of vibrating equipment or to provide
tight bends for interconnecting conduits. The range
can be surface mounted or cast-in concrete and
can also be used with standard conduit fittings.

Manufactured in accordance with

BS.4607 Part 3.
16mm EF/1 WHI 50m Coil FAB/1 WHI 50
MATERIAL: PVCu
COLOUR: White 20mm EF/2 WHI 50m Coil FAB/2 WHI 50

STANDARD LENGTH: 50 metres coil. 25mm EF/3 WHI 50m Coil FAB/3 WHI 50

32mm EF/4 WHI 25m Coil FAB/4 WHI 10

Rectangular
Channelling

2 METRE LENGTHS

WALL THICKNESS: 0.9mm.

MATERIAL: PVCu
COLOUR: White.
STANDARD LENGTH: 2 metres.
Other lengths can be supplied
against quantity orders.

12mm (8mm depth approx) REC/1 150m

25mm (8mm depth approx) REC/2 150m

38mm (9.5mm depth approx) REC/3 150m