产 品 规 格 书

DATA SHEET

PART NUMBER: HR-T3030WWH-C6S34-R7(LC)

苏州汉瑞森光电科技股份有限公司
Suzhou Hanraysun optoelectronic co., Ltd.

地址：江苏省苏州市高新区金枫路木桥街 25 号 Rev. 2.0 Page: 1 of 13

TEL:0512-68664647 FAX:0512-68381193 http://www.hanraysun.cn
CONTENTS

1. Features

2. Package Outline Dimensions

3. Absolute Maximum Ratings

4. Electrical Optical Characteristics

5. Tape Specifications and Reel Dimensions

6. Bin Code List

7. Typical Electro-Optical Characteristics Curves

8. Reflow profile

9. Reliability

10. Cautions

地址：江苏省苏州市高新区金枫路木桥街 25 号 Rev. 2.0 Page: 2 of 13

TEL:0512-68664647 FAX:0512-68381193 http://www.hanraysun.cn
1．Features
● Package in 8mm tape on 177. 8mm （ 7inch ） diamet er reels.

● Compat ible wit h aut omat ic placem ent equipment .

● Compat ible wit h inf rar ed and va por phas e reflow solder pr ocess.

●Meet gr een pr oduct and Pb- fr ee(A ccor ding to RoHS )

2．Package Outline Dimensions

■ Package Size – 3.0(L) × 3.0(W) × 0.55(T) mm
■ White Emission Package (Top View)
■ Ideal for backlighting and coupling in light guides
■ Wide view angle (2Θ 1/2=120deg.)

注：Notes:
1. Tolerance is ±0.1 mm (.002") unless otherwise noted.
Dice Material Light Color Lens Color

InGaN White Yellow Diffused

地址：江苏省苏州市高新区金枫路木桥街 25 号 Rev. 2.0 Page: 3 of 13

TEL:0512-68664647 FAX:0512-68381193 http://www.hanraysun.cn
3．Absolute Maximum Ratings at Ta=25℃

Item Symbol Maximum Unit

Power dissipation PD 1800 mW

Continuous forward current IF 300 mA

Peak forward current (1/10 duty cycle 0.1ms pulse width) IFP 400 mA

Reverse voltage VR 5 V

Electrostatic Discharge (HBM) ESD 3000 V

Operating temperature range Topr -35 to +85 ℃

Storage temperature range Tstg -40 to +100 ℃

LED junction temperature Tj 125 ℃

4．Electrical Optical Characteristics At Ta=25℃

Parameter Symbol Min. Typ. Max. Unit Test Condition

Luminous Flux φ 150 205 lm IF = 300mA

Forward Voltage VF 6.0 -- 7.0 V IF = 300mA

Color Temperature CCT -- 20000 -- K IF =300mA

Viewing Angle 2θ1/2 -- 120 -- Deg IF = 300mA

Reverse Current IR -- -- 10 μA VR=5V

Notes: 1. Tolerance of Luminous Intensity ±5%

2.The above forward voltage measurement allowance tolerance is ±0.1V
3.Tolerance of X、Y ± 0.004

地址：江苏省苏州市高新区金枫路木桥街 25 号 Rev. 2.0 Page: 4 of 13

TEL:0512-68664647 FAX:0512-68381193 http://www.hanraysun.cn
5. Tape Specifications and Reel Dimensions

Reel+Silicagel -> Aluminum Bag

5.1 Packing

Reel
苏州汉瑞森光电科技股份有限公司
Suzhou Hanraysun Optoelectronic Co.,Ltd
Part No.HR-T3030WWH-C6S34-R7(LC)
Lot No: Quantity:4000 PCS
Code:xx/xx/xx/xx IF:xx mA

HRS 2016 XX XX

Aluminum Bag

CODE: XX XX XX XX

光通量 色区 电压 Chip波长

地址：江苏省苏州市高新区金枫路木桥街 25 号 Rev. 2.0 Page: 5 of 13

TEL:0512-68664647 FAX:0512-68381193 http://www.hanraysun.cn
Inner Box Outer Box

HANRAYSUN
LIGHTING
HANRAYSUN 苏州汉瑞森光电科技股份有限公司
LIGHTING Suzhou Hanraysun optoelectronic co., Ltd.
苏州汉瑞森光电科技股份有限公司
Suzhou Hanraysun optoelectronic co., Ltd.

型号（Part. No）:
型号（Part. No）:
数量（Q'ty）： 数量（Q'ty）：
日期（Date）: 日期（Date）:

Type MAX Q'ty

1 Reel 4K
1 Aluminum Bag 8K
1 Inner Box 200K
1 Outer Box 400K

Box size
L W H

Inner Box 460 240 270

Outer Box 480 500 300

6. Bin Code List

Luminous Intensity Bin Limits

Test Condition @300mA

BIN Code IV min(lm) IV max (lm)
K6 150 155
K7 155 160
K8 160 165
K9 165 170
L0 170 175
L1 175 180
L2 180 185
L3 185 190
L4 190 195
L5 195 200
L6 200 205

Forward Voltage Bin Limits

地址：江苏省苏州市高新区金枫路木桥街 25 号 Rev. 2.0 Page: 6 of 13

TEL:0512-68664647 FAX:0512-68381193 http://www.hanraysun.cn
 Test Condition： @300mA
BIN Code Vfmin(v) Vfmax(v)
Z60 6.0 6.2
Z62 6.2 6.4
Z64 6.4 6.6
Z66 6.6 6.8
Z68 6.8 7.0

Chip wavelength selection

HUE(nm)
Rank
min max
W1 442.5 445.0
W2 445.0 447.5
W3 447.5 450.0
W4 450.0 452.5
W5 452.5 455.0

地址：江苏省苏州市高新区金枫路木桥街 25 号 Rev. 2.0 Page: 7 of 13

TEL:0512-68664647 FAX:0512-68381193 http://www.hanraysun.cn
Color Coordinate Bin Limits

Bin CIE X/Y

X 0.2629 0.2689 0.2776 0.2717

R1
Y 0.2228 0.2354 0.2306 0.218
X 0.2689 0.2749 0.2834 0.2776
S1
Y 0.2354 0.248 0.2432 0.2306

Tolerance of X、Y ± 0.004

地址：江苏省苏州市高新区金枫路木桥街 25 号 Rev. 2.0 Page: 8 of 13

TEL:0512-68664647 FAX:0512-68381193 http://www.hanraysun.cn
7. Typical Electro-Optical Characteristics Curves

地址：江苏省苏州市高新区金枫路木桥街 25 号 Rev. 2.0 Page: 9 of 13

TEL:0512-68664647 FAX:0512-68381193 http://www.hanraysun.cn
8. Reflow profile

Suggest Sn/Pb IR Reflow Soldering Profile Condition

地址：江苏省苏州市高新区金枫路木桥街 25 号 Rev. 2.0 Page: 10 of 13

TEL:0512-68664647 FAX:0512-68381193 http://www.hanraysun.cn
9.Reliability

9.1 Test items and results

Items Test Conditions Notes Quantity Ac/Re

-40℃~100℃
Temperature Cycle 100Cycle 22 0/1
(30min~5min~30min)

Steady State
Ta = 25℃, 1000hrs 22 0/1
OperatingLife

Steady State
Operating Life of
Ta = 85℃/RH = 85%, 1000hrs 22 0/1
HighTemperature &
High Humidity

Resistance to
Tmax=260℃, ≤10sec 2 times 22 0/1
SolderingHeat

High-temperature
Ta = 100℃ 1000hrs 22 0/1
storage

Low temperature
Ta = -40℃ 1000hrs 22 0/1
storage

9.2 Criteria for Judging the Damage

Criteria for Judgement

Parameter Symbol Condition
Min. Max.
Forward Voltage VF IF =300mA - U.S.L.(1) * 1.2
Luminous Intensity Iv IF =300mA L.S.L.(2) * 0.7 -
Reverse Current IR VR = 5V - 10㎂

Notes （1) U.S.L. : Upper Specification Level

（2) L.S.L. : Lower Specification Leve

地址：江苏省苏州市高新区金枫路木桥街 25 号 Rev. 2.0 Page: 11 of 13

TEL:0512-68664647 FAX:0512-68381193 http://www.hanraysun.cn
10．Cautions
1、Package
When moisture is absorbed into the package it may vaporize and expand during soldering.
There is apossibility that this can cause exfoliation of the contacts and damage to the optical
characteristics of the LEDs. So the moisture proof package is used to keep moisture to a minimum
in the package.
2、Storage
Before opening the package:The LEDs should be kept at 5~30°C and 30%RH or less. After
opening the package: The LED must be used within 24 hours, else should be kept at 5~30℃ and
10% RH or less. The LEDs should be used within 7days after opening the package. If unused
LEDs remain, they should be stored in moisture proof packages, recommended to return the LEDs
to the original moisture proof bag and to reseal the moisture proof bag again.
3、Using

The LEDs should be used within half a year. The LEDs must be placed 70°C industrial ovens to
15 hours or 65 C industrial ovens to 24 hours or more to dehumidification before using.

4. Soldering
Do not apply any stress to the LED lens during soldering while the LED is at high temperature.
Recommended soldering condition.
* Reflow Soldering :
Pre-heat 120~150°C, 120sec. MAX., Peak temperature : 240°C Max. Soldering time : 10 sec
Max.
* Soldering Iron : (Not recommended)
Temperature350°C Max., Soldering time : 3 sec. Max.(one time only), power dissipation of
iron :
20W Max. use SN60 solder of solder with silver content and don’t to touch LED lens when
soldering.
4.1 Lead-Free Soldering
For Reflow Soldering :
1）、Pre-Heat Temp: 150-180℃,120sec.Max.
2）、 Soldering Temp: Temperature Of Soldering Pot Over 240℃,40sec.Max.
3）、Peak Temperature: 260℃，10sec.
4）、Reflow Repetition: 2 Times Max.
5）、Suggest Solder Paste Formula : 93.3 Sn/3.1 Ag/3.1 Bi/0.5 Cu
5.Repairing
Repairing should not be done after the LEDs have been soldered. When repairing is
unavoidable, adouble-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

地址：江苏省苏州市高新区金枫路木桥街 25 号 Rev. 2.0 Page: 12 of 13

TEL:0512-68664647 FAX:0512-68381193 http://www.hanraysun.cn
 6、The LED’s chip electrode sections are comprised of a gold plated. The gold surface may be
affected by environments which contain corrosive gases and so on. Please avoid conditions which
may cause the LED to corrode or discolor. This corrosion or discoloration may cause difficulty
during soldering operations. It is recommended that the User use the LEDs as soon as possible.
7、Please avoid rapid transitions in ambient temperature, especially in high humidity environments
where condensation can occur.
8 、 The expensive department in the use of we LED light particles in application, please pay
attention to the device and thermal conductivity and heat matching particle source.

9、 Static Electricity
9.1、These products are sensitive to static electricity charge, and users are required to handle
with care. Particularly, if an current and or voltage which exceeds the Absolute Maximum Rating of
Products is applied, the overflow in energy may cause damage to, or possibly result in electrical
destruction of, the Products. The customer is requested to take adequate countermeasures
against static electricity charge and surge when handling Products.
9.2、Proper grounding of Products,use of conductive mat,conductive working uniform and shoes,
and conductive containers are effective against static electricity and surge.
9.3、Ground low-resistance areas where the product contacts, such as metal surfaces of the work
platform, with a conductive mat (surface resistance 106-108 Ω ).
9.4、A tip of soldering iron is requested to be grounded. An ionizer should also be installed where
risk of static generation is high.

◆ Notes
1 、 Above specification may be changed without notice. We will reserve authority on material
change for above specification.
2、When using this product, please observe the absolute maximum ratings and the instructions for
the specification sheets. We assume no responsibility for any damage resulting from use of the
product which does not comply with the instructions included in the specification sheets.

地址：江苏省苏州市高新区金枫路木桥街 25 号 Rev. 2.0 Page: 13 of 13

TEL:0512-68664647 FAX:0512-68381193 http://www.hanraysun.cn