Instrumentation Manifolds: Traditional, C13ST Series

For DPharp EJX & EJA-E Differential Pressure and Pressure Transmitters
Introduction

Introduction

The partnership of Yokogawa and AS-Schneider creates a real added value to our customers.

Yokogawa Electric Corporation with its headquarters in Japan is one of the World's Leading Manufacturers and Engineering
Service Provider in the fields of Automation, Measurement, and Control.

The AS-Schneider Group with its headquarters in Germany is one of the World's Leading Manufacturers of Instrumentation
Valves and Manifolds. AS-Schneider offers a large variety of Valves and Manifolds as well as numerous accessories needed
for the instrumentation installations globally.

In this catalogue you will find C13ST Manifolds for Yokogawa's DPharp EJX Series and EJA Series Transmitters for Differential Pressure, Gauge
and Absolute Pressure Applications and the relevant Installation Accessories.

Continuous product development may from time to time necessitate changes in the details contained in this catalogue. AS-Schneider and
Yokogawa reserve the right to make such changes at their discretion and without prior notice.

All dimensions shown in this catalogue are approximate and subject to change.

2 Introduction
 General Features

Body Material Options

AS Material Material Equivalent Material Grade

Material Group Short Name
Designation No. UNS-No. acc. to ASTM acc. to JIS
Austenitic Stainless 316 quadruple 1.4401 X5CrNiMo17-12-2 S31600 316 SUS316
Steel certified* 1.4404 X2CrNiMo17-12-2 S31603 316L SUS316L
Austenitic-Ferritic Duplex 1.4462 X2CrNiMoN22-5-3 S31803 F51 SUS329J3L
Stainless Steel Superduplex 1.4410 X2CrNiMoN25.7.4 S32750 F53
Alloy 400 2.4360 NiCu30Fe N04400 NW4400
Nickel Based
Alloy C-276 2.4819 NiMo 16 Cr 15 W N10276 NW0276
Alloys
Alloy 625 2.4856 NiCr22Mo9Nb N06625 NCF 625
* Quadruple certified means 316 / 316L / 1.4401 / 1.4404

Standard Features

• Bore Size 5 mm Certification:

• Manifolds are not supplied with plugs unless specified. Inspection Certificate 3.1 acc. to EN 10 204 for valve body material
and pressure test available as standard.
• Anti-Tamper Head Unit Options see Page 6.
The manifolds can be provided upon request with a
Needle Seal: • CRN Certificate
PTFE and Graphite Packings are available for all valve types. When • EAC Certificate – Manifolds are marked with EAC
Graphite Packing is selected, material of Flange Seal and Tape for
PMI Test on request. Test points are one each on body and valve bon-
Tapered Pipe Threads is also Graphite (when applicable).
net. A combined certificate for each order is provided listing the che-
mical analysis for each manifold.
Sour Gas Service:
Wetted Parts according to a.m. material list are supplied as Graphite packed manifolds are Fire Safe Tested and Certified as
standard according to NACE MR0175/MR0103 and ISO 15156 standard.
(latest issue).

Pressure Test:
A Shell Test and a Seat Leakage Test are performed at 1.5 times the
max. allowable (working) pressure acc. to EN 12266-1 - P10, P11
and P12 respectively MSS-SP61 at every Standard Manifold
g 100% Pressure Tested!

Optional Features Pressure-Temperature Rating

Fugitive Emission Application:

For Fugitive Emission Applications AS-Schneider is providing
ISO 15848 and TA-Luft Solutions. For more details see Pages 5.

Oxygen Service:
An option with Reinforced PTFE Packing is offered duly cleaned
and lubricated for Oxygen Service:
Pressure-Temperature Rating:
Max. 420 bar (6,092 psi) @ 60°C (140°F)
Max. 200°C (392°F) @ 90 bar (1,305 psi)

Not every Valve Type is available for Oxygen Service!

Stainless Steel 316 Bolts: Low-temperature Limits:

Manifold mounting bolts are supplied in Carbon Steel as Standard. - Standard Valves with PTFE and Graphite Packing: -40°C (-40°F)
SS316 Bolts are available as an option. - Valves with PTFE Packing and Arctic Operations Option,
Option Code L []:   -55°C (-67°F)
Stainless Steel 660 D Bolts:
When NACE Compliant Bolting is required please use Bolting Packing adjustment may be required during the service life of the
Option N2 or N4 g ASTM A453 Gr. 660 Class D. valves.
Valves that have not been cycled for a period of time may have a
If you don't find your options in this catalogue please higher initial actuation torque.
contact Yokogawa.

General Features 3
Standard Valve Head Units

Standard Bonnet Design

T Handle Color Coded Dust Cap

Ergonomic Handle Design. For operating thread protection:
Operating options are Anti-Tamper features
Isolate        blue
or a Stainless Steel Handwheel.
Vent /Test        red
Equalize green
Valve Stem
Stem with cold rolled threads for high Color Coded Options
strength and smooth operation.
Following options are also color coded
below dust cap:
Needle Seal
Oxygen Service
Standard: PTFE or Graphite Packing
       
Needle
Non-rotating Needle for smooth operation Graphite Packing   
and minimum wear of sealing elements.

Back Seat TA-Luft Option

Metal to Metal secondary needle seal and
therefore the needle is anti-blowout /
non-removable – For your safety.
Lock Pin
Needle Tip Eliminates unauthorized removal of the
bonnet assembly.
Choices of Needle Tip Materials, same as
body material.
Bonnet
Valve Seat Metal to Metal Seal to Valve Body.
Metal seated (integral type).
Traceability of Materials
All Manifolds have material traceability.
A unique code is stamped on all valve
bodies linking them with their material
and chemical analysis certificates.

Flow Data Materials of Construction

Needle Valves Standard Head Unit – Bore Size 5 mm

Stainless Steel Exotic Alloys
Components
Material / Material No.

Body

Bonnet Super
Duplex
SS 316 / 316L Alloy 400 Alloy C-276 Duplex Alloy 625
Needle S31803
S32750
Pipe Plug

Valve Stem 316 / 316L

Gland 316
Packing PTFE or Graphite
Stem Nut 316

Lock Nut 316

Set Screw 316

T Handle 316

Lock Pin A4 (316)

Wetted components listed in bold.

4 Standard Valve Head Units

 Valve Head Units

Standard Needle Valves

Screwed Bonnet – Stem Seal: Packing Standard Design High Pressure Design
Features 420 bar (6,092 psi) 689 bar (10,000 psi) and
500 bar (7,252 psi)
• Lock Pin – Eliminates unauthorized removal of the bonnet
• Standard Packing in PTFE and Graphite available

Standard: 57 (2.24") open

• Max. allowable (Working) Pressures (PS):
– Block & Bleed Manifolds for In-Line Mount Transmitters

62 (2.44") open
- 689 bar (10,000 psi) – For PTFE Packing
- 500 bar (7,252 psi) – For Graphite Packing
– Direct Mount Manifolds acc. to IEC 61518
420 bar (6,092 psi)
– Direct Mount Manifolds with Flange Connection for
High Pressure Type MWP 500 bar (7,252 psi)

Standard Features applicable for all

illustrated valve types:
• Integral Valve Seat – Metal to Metal Seated
• N
 on-rotating Needle
• External Stem Thread – Packing below stem threads.
Body-to-Bonnet Seal
Stem Threads are protected from process media is below the threads
(non-wetted), helps to prevent stems from galling. eliminating process
• Stem with cold rolled threads fluid corrosion.
• B low-out proof Needle
• Back Seat – Metal to metal secondary needle Seal
• Color Coded Dust Cap for operating thread
protection
• Anti-Tamper Valve Head Options available
• All non-wetted parts in 316 stainless steel

Needle Valves according ASME B31.1 (Power Piping)

Screwed Bonnet – Stem Seal: Graphite Packing

Meet the requirements of ASME B31.1 (Power Piping).
Max. allowable (Working) Pressure (PS): 500 bar (7,252 psi)
A Locking Plate eliminates an unauthorized removal of the bonnet.
g Standard Features see above table with a grey colored
background.
Option Code P[]
Needle Valves acc. to ISO 15848

Screwed Bonnet – Type 1 O-Ring Stem Seal + Graphite Packing

       Type 3 PTFE Packing
Features
• Max. allowable (Working) Pressure (PS): 420 bar (6,092 psi)
• Lock Pin – Eliminates unauthorized removal of the bonnet
86 (3.39") open

• FKM O-Ring Needle Seal – RGD (Rapid Gas Decompression)

resistant
• P TFE or Graphite Packing
• Types also comply with the requirements of TA-Luft 2002
g Standard Features see above table with a grey colored
background.

ISO FE Performance Data

ISO FE Type 1: Class B 1,500 cycles /   –29°C      to 200°C
Class A 1,500 cycles / –29°C to     4 0°C    (–20°F       to 392°F)
    (–20°F    to 104°F) ISO FE Type 3:
Class A    500 cycles / –29°C      to 200°C Class B 1,500 cycles /  –29°C      to 200°C
   (–20°F       to 392°F)      (–20°F       to 392°F)

Option Code D[] or E[]

Valve Head Units 5

Valve Head Unit Options

Needle Valves according to TA-Luft

The German TA-Luft (Technical Guidelines for Air Pollution Control) gives guidelines for compliance with permissible leak rates. The
TA-Luft requirement is considered to be complied with if bellows sealed head units with a safety packing or similar sealing systems are
used; whereby the equivalence in the verification system must be confirmed in accordance with VDI 2440.

Features
• M ax. allowable (Working) Pressure (PS): 420 bar (6,092 psi)
• Cup & Cone Packing (Reinforced PTFE) –

62 (2.44") open
TA-Luft Option
• Lock Pin – Eliminates unauthorized removal
of the bonnet

g Standard Features see table with the grey colored

background on Page 5.

Option Code W[]

Anti-Tamper Valve Head Unit Options

Two types of Anti-Tamper Valve Head Units are offered, both types are lockable with a padlock (not supplied with manifold).
Please refer to Page 19 for detail of Ordering Information.

Standard Anti-Tamper Head Unit

The valves are operated with a special Anti-Tamper Key
(AT-Key), which fits exactly in the key guide. The valve
can therefore only be operated with the AT-Key. In addi-
tion to this safety function, installing a padlock prevents
the AT-Key being inserted into the key guide. Operating
the valve is therefore no longer possible which protects
your equipment against unauthorized opening and closing
of the valve head units. The valve can be locked reliably
in every position required.

Option Code R[] or T[] Part Number C13SA-ATKES

Stainless Steel Handwheel and 'Locking Stainless Steel Handwheel

Plate' Design
The valves can be ordered optional with Stainless
Steel Handwheel (Option Code H) and also with an
additional fitted locking plate (Option Code L). This
design allows minimum handle movements and is ide-
al as protection against unauthorised closing of the
valve.

Option Code L[] Option Code H[]

6 Valve Head Unit Options

 Connections

Flange Connections

Flange Connection according to IEC 61518

According to IEC 61518 the manifold-transmitter interface is applicable for a max. allowable (Working) Pressure (PS) of 413 bar*3
(6,000 psi) and a max. allowable Temperature (TS) of 120°C (248°F) for liquids, gas or vapors. The max. allowable
Temperature (TS) of 120°C (248°F) is considering the requirement that manifolds and transmitters need to be protected against
heating by hot media. This can be achieved by using adequate hook-ups or by instrument impulse lines with sufficient length. How-
ever the Manifolds are suitable for temperatures up to 550°C (1,022°F), PTFE up to 232°C (450°F), Graphite up to 550°C (1,022°F).

Manifold Connection acc. to IEC 61518 Type B Process Connection of H-Style Manifolds or
Transmitter Connection acc. to IEC 61518

54 (2.13") ≥ 15 54 (2.13")
8.
11
Ø

7/16-20 UNF

41.3 (1.63")
41.3 (1.63")

Ø 25.5
Ø 19.9

Ø 18.5
1)

2 2.5

1) Threaded option for transmitters – Pipe Plug, Vent Valve or Compression Fitting can be
installed.

Flange Connection for High Pressure Type MWP 500 bar*4

A Yokogawa proprietary flange connection for High Pressure Transmitters is also available optionally.

Manifold Connection – MCHP-Style Transmitter Connection Process Connection of H-Style

Manifolds for High Pressure Type
53.7 (2.11") > 18 (0,71'')
– PCHP-Style
8
.
11
Ø

7/16-20 UNF 7/16-20 UNF

41.3 (1.63")

Ø 21,3

Ø 25.5

Ø 20

Ø 20
Ø 15

Ø 15

1,2 3 3
6 6

Connection at the manifold Flange Connection for

acc. to IEC 61518*1 I *3 Type B High Pressure Type*4

Max. allowable (Working) Pressure (PS) in

413 (6,000)*3 500 (7,252)*4
bar (psi)
-10 to +80 -40 to +120 -10 to +80
Temperature Range in °C (°F)
(14 to 176) (-40 to 248) (14 to 176)

Flat Ring Flat Ring Flat Ring

Seal Ring*2 25.4 x 20 x 2.7 25.4 x 19.9 x 2.9 25.2 x 21.6 x 2
Material: PTFE Material: Graphite Material: Reinforced PTFE

Min. Thread Engagement in mm 9 9

* 1 IEC 61518 I Mating dimensions between pressure measuring instruments and flanged-on shut-off devices up to 413 bar (6,000 psi).
* 2 Materials and temperature limits for the flat rings and the O-Rings are for reference only. It is the responsibility of the user to ensure compatibility
between the selected gasket ring material and the process requirements, such as pressure, temperature, and chemical compatibility.
*3   IEC 61518 is stating 413 bar (6,000 psi), AS-Schneider however confirms 420 bar (6,092 psi).
*4 For Transmitter Model EJ [] 440 and EJ [] 130 with MWP ≥ 320 bar to ≤ 500 bar.

Connections 7
Connections

Manifold-to-Transmitter and
Process Connector-to-Manifold Assemby

1 2

1 Direct Mount Manifolds are supplied as standard 2 Process Connector Option for H-Style Manifolds
with Carbon Steel Bolts and PTFE Seal Rings* :
supplied as standard with Carbon Steel Bolts and
Wafer Style PTFE Seal Rings:
2 Valve Manifolds:     2 Bolts, 1 Seal Ring
2 Valve Manifolds: 2 Bolts, 1 Seal Ring
3 & 5 Valve Manifolds: 4 Bolts, 2 Seal Rings
3 & 5 Valve Manifolds: 4 Bolts, 2 Seal Rings
        Bolt Length 1.75"
Bolt Length 1.5"
T-Style and H-Style Connection Size of 1/2 NPT Female
2 Valve Manifolds:    4 Bolts, 4 Washers, 1 Seal Ring Process Connector:
3 & 5 Valve Manifolds:         4 Bolts, 4 Washers, 2 Seal Rings
        Bolt Length 1"
* Reinforced PTFE Seal Rings for High Pressure Type Manifolds

Process Connector-to-Manifold Assemby for

High Pressure Type H-Style Manifolds **

3 Process Connector Option for High 3

Pressure Type H-Style Manifolds are
supplied as standard with Carbon Steel
Bolts.
Seal Ring Material depends on maximum
working pressure of pressure Transmitter –
could be either Fluorinated rubber or
Reinforced PTFE.

** Process Connector incl. bolts and flange seal for

High Pressure Type are in the scope of supply by
default and are not available as accessory.

Hex Bolt Material used: Bolt Installation Instructions:

Carbon Steel: According to ASTM A449 – Type 1. 1. Finger-tighten the bolts.
316 Stainless Steel: According to ASTM A193 B8M Class 2. 2. Torque the bolts to the initial
torque value using a crossing
NACE Compliant Bolting: According to ASTM A453 Gr. 660 pattern.
Class D.
3. Torque the bolts to the final
Bolt Installation Torque Values torque value using the same
Connection crossing pattern.
Initial Torque Value Final Torque Value
IEC 61518
Flange Connection for 300 in.lb. (34 Nm) 646 in.lb. (73 Nm)
High Pressure Type

8 Connections
 Block & Bleed Manifolds for In-Line Mount
Absolute & Gauge Pressure Transmitters with Male or Female NPT Process Connection

Block & Bleed Manifolds (2 Valve Manifold)

Block & Bleed Manifolds are designed for In-Line Mount Absolute & Gauge Pressure Transmitters with Male or Female NPT Process
Connection. The standard vent connection is 1/4 NPT female. Pipe Plugs are not supplied as standard. For Plugged Vent Ports (factory
installed) and other Options see Pages 21 - 23 – Ordering Information.

Accessories like Mounting Brackets, Vent Valves, and Pipe Plugs etc. see also Pages 18 and 20.

Applicable for In-Line Mount DPharp Absolute & Gauge Pressure Transmitters

DPharp Pressure Max. allowable (Working) Pressure (PS)

Application
Transmitter Model MPa bar psi

EJX510A 50 500 7,200

EJX Series
EJX610A Absolute Pressure 70 700 10,150
EJA Series EJA510E 50 500 7,200
EJX530A 50 500 7,200
EJX Series
EJX630A Gauge Pressure 70 700 10,150
EJA Series EJA530E 50 500 7,200

Block & Bleed Manifolds –

Female Threaded Instrument Connection
Connection Type D Connection Type E
1/2 NPT Female Process x 1/2 NPT Female Instrument 1/2 NPT Male Process x 1/2 NPT Female Instrument
35,5 (1.40")

38,5 (1.52")
97 (3.82")

114 (4.49")

1 1/4"

157 (6.18") open 157 (6.18") open

Block & Bleed Manifolds –

Male Threaded Instrument Connection
Connection Type C
1/2 NPT Female Process x 1/2 NPT Male Instrument Example for a Typical Installation
43 (1.69")

106 (4.17")

1 1/4"

157 (6.18") open

Block & Bleed Manifolds for In-Line Mount

Absolute & Gauge Pressure Transmitters with Male or Female NPT Process Connection 9
Direct Mount Manifolds
Differential Pressure and Pressure Transmitters with Flanged Body

Direct Mount Manifolds (2, 3 and 5 Valve Manifolds)

Direct Mount Manifolds are designed for direct mounting to Differential Pressure and Pressure Transmitters with Standard Flange
Connection in accordance with IEC 61518. A Yokogawa proprietary flange connection for High Pressure Transmitters EJ[]440 is also available
optionally on the 2 valve manifolds as well as for the High Pressure Transmitters EJ[]130 on the 3 & 5 Valve Manifolds, but only in Stainless
Steel 316. The standard vent connection is 1/4 NPT female. Pipe Plugs are not supplied as standard. For Plugged Vent Ports (factory installed)
and other Options see Pages 21 - 23 – Ordering Information.
3 Valve Manifolds are as standard without vent/purge connections.
Following Body Styles are offered:
• Wafer Style Manifolds & T- Style Manifolds –
Both Manifolds 1/2 NPT Female x Flange
• H-Style Manifolds – Flange x Flange

Accessories like Mounting Brackets, Vent Valves, and Pipe Plugs etc. see also Pages 18 - 20.

Direct Mount 2 Valve Manifolds for

DPharp Absolute & Gauge Pressure Transmitters

Applicable for Direct Mount DPharp Absolute &

Gauge Pressure Transmitters
Max. allowable
DPharp Pressure (Working) Pressure (PS)
Application
Transmitter Model
MPa bar psi

EJX Series EJX310A Absolute

16 160 2,300
EJA Series EJA310E Pressure

EJX Series EJX430A

Gauge Pressure 16 160 2,300
EJA Series EJA430E
EJX Series EJX440A
High Gauge 50 500 7,200
EJA Series EJA440E

Wafer Style 2 Valve Manifolds – Vent Ports on Bottom Face

1/2 NPT Female x Flanged
This type is basically used for Horizontal Impulse Piping Installations

Isolate Valve as standard on left side (for transmitters with High Isolate Valve optional on right side (for transmitters with High
Pressure on left side) Pressure on right side)
*
115 (4.53") open

M6

25 (0.98") 31.2 (1.23")

122 (4.80") open *

* For High Pressure Type C13ST-2WSY please add 5 mm (0.20'')

Direct Mount Manifolds

10 Differential Pressure and Pressure Transmitters with Flanged Body
 Direct Mount Manifolds

Wafer Style 2 Valve Manifolds - Vent Ports on Process Side

1/2 NPT Female x Flanged
For direct mounting to Bottom Connection Type Transmitters and
for Vertical Impulse Piping Installations

63.5 (2.50")
M10
30 (1.18")

31.2
202 (7.95") open * (1.23")

* For High Pressure Type C13ST-2BSY please add 10 mm ( 0.40'')

Example for a Horizontal and Vertical Example for a Bottom Connection

Impulse Piping Installation Type Transmitter

Direct Mount Manifolds 11

Direct Mount 2 Valve Manifolds

T-Style 2 Valve Manifolds T-Style 2 Valve Manifolds

1/2 NPT Female x Flanged Isolate Valve optional on right side
* 105 (4.13") open

M6

25 (0.98")

95 (3.74")
148 (5.83") open *

H-Style 2 Valve Manifolds H-Style 2 Valve Manifolds

Flanged x Flanged Isolate Valve optional on right side
*
105 (4.13") open

M6

25 (0.98")

148 (5.83") open * 95 (3.74")

* For High Pressure Type C13ST-2TSY Resp. C13ST-2HSW please add 5 mm (0.20'')

Examples for
Horizontal and Vertical Impulse Piping Installations

12 Direct Mount 2 Valve Manifolds

 Direct Mount 3 Valve Manifolds

Direct Mount 3 Valve Manifolds for

DPharp Differential Pressure Transmitters

3 Valve Manifolds applicable for

Direct Mount DPharp Differential Pressure Transmitters

Max. allowable (Working) Pressure (PS)

DPharp Pressure
Application
Transmitter Model MPa bar psi

EJX Series EJX110A 25 250 3,600

Differential Pressure
EJA Series EJA110E 16 160 2,300
EJX Series EJX120A
Draft Range 0.05 0.5 7.25
EJA Series EJA120E
EJX Series EJX130A
Differential Pressure (High Static) 32 320 4,500
EJA Series EJA130E
EJX910A 25 250 3,600
EJX Series Multivariable Transmitter
EJX930A 32 320 4,500

Wafer Style 3 Valve Manifolds

1/2 NPT Female x Flanged

*
106 (4.17") open

30 (1.18") 31.2 (1.23")

38 (1.50")

217 (8.54") open **

* For High Pressure Type C13ST-3WSY please add 5mm (0.20'')

** For High Pressure Type C13ST-3WSY please add 10 mm (0.40'')

Example for a Example for a

Horizontal and Vertical Impulse Piping Installation Bottom Connection Type Transmitter

Mounting Bracket C13SA-MDPS0

could also be used.

Direct Mount 3 Valve Manifolds 13

Direct Mount 3 Valve Manifolds

T-Style 3 Valve Manifolds

1/2 NPT Female x Flanged

*
105 (4.13") open
M6

25 (0.98")

54 (2.13") 95 (3.74")

199 (7.83") open **

H-Style 3 Valve Manifolds

Flanged x Flanged

*105 (4.13") open

M6

25 (0.98")

199 (7.83") open ** 95 (3.74")

* For High Pressure Type C13ST-3TSY resp. C13ST-3HSW please add 5 mm (0.20'')
** For High Pressure Type C13ST-3TSY resp. C13ST-3HSW please add 10 mm (0.40'')

Examples for
Horizontal and Vertical Impulse Piping Installations

14 Direct Mount 3 Valve Manifolds

 Direct Mount 5 Valve Manifolds

Direct Mount 5 Valve Manifolds for

DPharp Differential Pressure Transmitters

5 Valve Manifolds applicable for

Direct Mount DPharp Differential Pressure Transmitters

DPharp Pressure Max. allowable (Working) Pressure (PS)

Application
Transmitter Model MPa bar psi

EJX Series EJX110A 25 250 3,600

Differential Pressure
EJA Series EJA110E 16 160 2,300
EJX Series EJX120A
Draft Range 0.05 0.5 7.25
EJA Series EJA120E
EJX Series EJX130A
Differential Pressure (High Static) 32 320 4,500
EJA Series EJA130E
EJX910A 25 250 3,600
EJX Series Multivariable Transmitter
EJX930A 32 320 4,500

Wafer Style 5 Valve Manifolds - Vent Ports on Bottom Face

1/2 NPT Female x Flanged
This type is basically used for Horizontal Impulse Piping Installations
*
115 (4.53") open

M10
38 (1.50")

105 (4.13") 31.2 (1.23")

246 (9.69") open **

* For High Pressure Type C13ST-5WSY please add 5 mm (0.20'')

** For High Pressure Type C13ST-5WSY please add 10 mm (0.40'')

Direct Mount 5 Valve Manifolds 15

Direct Mount 5 Valve Manifolds

Wafer Style 5 Valve Manifolds - Vent Ports on Process Side

1/2 NPT Female x Flanged
For direct mounting to Bottom Connection Type Transmitters and
for Vertical Impulse Piping Installations

*
115 (4.53") open
38 (1.50")

259 (10.20") open ** 31.2

(1.23")

* For High Pressure Type C13ST-5BSY please add 5 mm (0.20'')

** For High Pressure Type C13ST-5BSY please add 16 mm (0.63'')

Example for a Example for a

Horizontal and Vertical Impulse Piping Installation Bottom Connection Type Transmitter Installation

Mounting Bracket C13SA-MUPS0

could also be used.

16 Direct Mount 5 Valve Manifolds

 Direct Mount 5 Valve Manifolds

T-Style 5 Valve Manifolds

1/2 NPT Female x Flanged

*118 (4.65") open

M6

25 (0.98")

54 (2.13")

209 (8.23") open **

H-Style 5 Valve Manifolds

Flanged x Flanged

*118 (4.65") open

M6

25 (0.98")

209 (8.23") open **

* For High Pressure Type C13ST-5TSY resp. C13ST-5HSW please add 5 mm (0.20'')
** For High Pressure Type C13ST-5TSY resp. C13ST-5HSW please add 10 mm (0.40'')

Examples for
Horizontal and Vertical Impulse Piping Installations

Direct Mount 5 Valve Manifolds 17

Additional Features

Mounting Bracket Kit for

Block & Bleed Manifolds, C13SA-MSPS0

72 (2.83") 100 (3.94")

72 (2.83")

Mounting Bracket Kit for

Direct Mount Manifolds – Wafer & T-Style Bodies, C13SA-MUPS0

25 (0.98")

Ø7
(0 .2
8")
)
3"
( 0 .4
11
Ø
(0 .67 ")
Ø 17

30 (1.18") )
3"
( 0 .4
11
Ø
72 (2.83")

72 (2.83")

25 (0.98")

30 (1.18")

18 Additional Features
 Additional Features

Mounting Bracket Kit for

Direct Mount Wafer Style Manifolds and
Bottom Connection Type Transmitter, C13SA-MDPS0

85 (3.35")

72 (2.83")

30
(1.18")

72 (2.83")
55 (2.17") 72 (2.83")

Mounting Bracket Kit for

Direct Mount Manifolds – H-Style Bodies, C13SA-MUPSH

25 (0.98")

Ø7
(0 .2
8")
)
3"
( 0 .4
11
Ø
(0 .67 ")
Ø 17

30 (1.18") )
3"
( 0 .4
11
Ø
72 (2.83")

Spacer
Ø 7 (0.28")

72 (2.83")
22 (0.87")

25 (0.98")

25 (0.98")
30 (1.18")

45 (1.77")

Additional Features 19
Additional Features / Accessories

Mounting Bracket Kits for

Sunshade Installation Applications,
C13SA-MKPS0 / C13SA-MKPS1

72 (2.83")

Ø
10
(0

72 (2.83")
. 39
")

11
)
(0.43") 8"
.2
(0
7
Ø

25 (0.98")
44 (1.73")

16 (0.63")
(0 17
. 67
")

Mounting Bracket Kits for

Sunshade Installation Applications are available in 2 different lengths:

Mounting Bracket Kits

for Standard Pressure Transmitters
C13SA-MKPS0
L = 284mm (11.81'')

Mounting Bracket Kits

for High Pressure Transmitters EJ[] 130, EJ[]440,
C13SA-MKPS1
L = 329mm (12.95'')

L Note:
The Sunshades are not in the scope of supply.

Accessories
(see also Pages 21 - 23 – Ordering Information)

1/4 NPT Pipe Plugs and Vent Valves Process Connector for H-Style Manifolds only:
Flange Connection acc. to IEC 61518 Type B x 1/2 NPT Female
(Not applicable to Connection Type Code W.)
Pipe Plug Vent Valve
48 (1.89") open

HEX 14 HEX 19
22 (0.87")

Process Connector and Mounting Kit added separately.

20 Additional Features / Accessories

 Ordering Information

Model Suffix Codes Description

C13ST ................................................... Manifold (AS-Schneider) – Traditional Mounting
-2 .............................................. 2 Valve
-3 .............................................. 3 Valve
-5 .............................................. 5 Valve
W ......................................... Wafer Style - Vent Ports on Bottom Face
B ......................................... Wafer Style - Vent Ports on Process Side
T ......................................... T-Style
Body Type H ......................................... H-Style
& Material G ......................................... Block & Bleed Manifold
S .................................... SS 316/316L
H .................................... Alloy C-276
Standard Features

M .................................... Alloy 400

E .................................... Duplex S31803
W .................................... Super Duplex S32750
C .................................... Alloy 625
Connection Types
Process Side Instrument Side
For Wafer & T-Style A ................................ Flange Connection (IEC 61518-B)
1/2 NPT Female
Body Y ................................ Flange Connection for HP Type (MCHP)*

H-Style Body B ................................ Flange Connection IEC 61518 Flange Connection (IEC 61518-B)
W ................................ Flange Connection PCHP* Flange Connection for HP Type (MCHP)*

C ................................ 1/2 NPT Female 1/2 NPT Male

For Block & Bleed
Manifold D ................................ 1/2 NPT Female 1/2 NPT Female
E ................................ 1/2 NPT Male 1/2 NPT Female

0 ........................ Always '0' for 3 Valve and 5 Valve

1 ........................ Left Side High Pressure (for 2 Valve Manifold, except C13ST-2B)
Installation 2 ........................ Right Side High Pressure (for 2 Valve Manifold, except C13ST-2B)
B ........................ Always 'B' for 2 Valve Manifold, C13ST-2B
T ........................ Always 'T' for Block & Bleed Manifold
Model Suffix Codes Description
-S2 ............ For 2 Valve, Wafer Style (2 Bolts), SS 316
-S4 ............ For Other Styles (4 Bolts), SS 316
Bolting -N2 ............ For 2 Valve, Wafer Style (2 Bolts), ASTM A453 Grade 660, Class D
-N4 ............ For Other Styles (4 Bolts), ASTM A453 Grade 660, Class D
-NN ............ Carbon Steel Bolts as Standard (always 'NN' – None for Block & Bleed Manifold)
Bonnet Options
PTFE Packing -NN ..... Standard
Additional Features

-G2 ..... For 2 Valve

Graphite Packing, MWP 500 bar -G3 ..... For 3 Valve
-G5 ..... For 5 Valve
-P2 ..... For 2 Valve
Power Piping ASME B31.1 -
-P3 ..... For 3 Valve
Graphite Packing, MWP 500 bar
-P5 ..... For 5 Valve
ISO FE Type 1 - -D2 ..... For 2 Valve
Graphite Packing + -D3 ..... For 3 Valve
O-Ring Stem Seal, MWP 420 bar -D5 ..... For 5 Valve
ISO FE Type 3 - -E2 ..... For 2 Valve
Reinforced PTFE Packing, -E3 ..... For 3 Valve
MWP 420 bar -E5 ..... For 5 Valve
TA-Luft - -W2 ..... For 2 Valve
Reinforced PTFE Packing, -W3 ..... For 3 Valve
MWP 420 bar -W5 ..... For 5 Valve
-L2 ...... For 2 Valve
Arctic Operations -55°C (-67°F) –
-L3 ...... For 3 Valve
PTFE Packing
-L5 ...... For 5 Valve
* For Transmitters with MWP ≥ 320 bar to ≤ 500 bar and Body Material SS 316 / 316L only. Definition of MCHP- / PCHP-Style see Page 7.

Ordering Information 21
Ordering Information

Model Suffix Codes Description

P ..................... Pipe Plug
V ..................... Vent Valve
S ................ SS 316/316L
H ................ Alloy C-276
M ................ Alloy 400
Pipe Plugs / Vent Plugs E ................ Duplex S31803
W ................ Super Duplex S32750
C ................ Alloy 625
1 ............ For 1 Port, 2 Valve
2 ............ For 2 Ports, 5 Valve
Additional Features

N N N ............ Without Plugs as Standard

-K2 .............. For 2 Valve
Cleaning for Oxygen Service –
-K3 .............. For 3 Valve
For Manifolds with PTFE Packing only -
-K5 .............. For 5 Valve
Bonnet Option Code -NN or -L[], MWP 420 bar
-NN .............. None
H2 .......... Handwheel, for 2 Valve
H3 .......... Handwheel, for 3 Valve
H5 .......... Handwheel, for 5 Valve
L2 .......... Handwheel with Locking Plate Design, for 2 Valve
L3 .......... Handwheel with Locking Plate Design, for 3 Valve
L5 .......... Handwheel with Locking Plate Design, for 5 Valve
Valve Operator R2 .......... Anti-Tamper with Key, for 2 Valve
R3 .......... Anti-Tamper with Key, for 3 Valve
R5 .......... Anti-Tamper with Key, for 5 Valve
T2 .......... Anti-Tamper without Key, for 2 Valve
T3 .......... Anti-Tamper without Key, for 3 Valve
T5 .......... Anti-Tamper without Key, for 5 Valve
NN .......... None

Example for building up the Part No. of a 5 Valve Wafer Style Manifold acc. to the above mentioned Ordering Information:
C13ST-5WSA0-S4-NNPS2-NNNN Manifold (AS-Schneider) - Traditional Mounting
C13ST-5 5 Valve Manifold
............ W Wafer Style – Vent Ports on Bottom Face
................ S Material: SS 316/316L
.................. A Process Side: 1/2NPT Female Connection, Instrument Side: Flange Connection (IEC 61518-B)
..................... 0 Always '0' for 5 Valve Manifolds
....................... -S4 Bolting: SS 316
............................. -NN PTFE Packing as Standard
.................................... PS2 Pipe Plugs: SS 316, installed in Vent Ports
........................................... -NN Cleaning for Oxygen Service: None
................................................... NN Valve Operator: Standard (T Handle)

22 Ordering Information
 Ordering Information – Accessory

Model Suffix Codes Description

C13SA ............................................... Accessory for Manifold (AS-Schneider)
Process Connector, 1 Process Connector / 2 Bolts / 1 Seal Ring /
-KF .......................................
1/2 NPT Female Inlet / IEC 61518-B Outlet
S ..................................... SS 316/316L
H ..................................... Alloy C-276
M ..................................... Alloy 400
E ..................................... Duplex S31803
W ..................................... Super Duplex S32750
C ..................................... Alloy 625
For N ................................. Carbon Steel Bolts as Standard
Traditional S ................................. SS 316 Bolts
Accessory

Mounting P ............................ Seal Ring, PTFE

Manifolds G ............................ Seal Ring, Graphite
-MSPS0 . . . . . . . . . . . . . . . . . . . . . . . . . ........... Mounting Bracket for Block & Bleed Manifold, SS 316
-MUPS0 . . . . . . . . . . . . . . . . . . . . . . . . . ........... Mounting Bracket for Wafer / T-Style Manifold, SS 316
-MUPSH . . . . . . . . . . . . . . . . . . . . . . . . . ........... Mounting Bracket for H-Style Manifold, SS 316
Mounting Bracket for Wafer Style Manifolds and Vertical Impulse
-MDPS0 . . . . . . . . . . . . . . . . . . . . . . . . . ...........
Piping Installations
Mounting Bracket for Sunshade Installation Applications,
-MKPS0 . . . . . . . . . . . . . . . . . . . . . . . . . ...........
Standard Transmitter
Mounting Bracket for Sunshade Installation Applications,
-MKPS1 . . . . . . . . . . . . . . . . . . . . . . . . ............
High Pressure Type Transmitter
-ATKES . . . . . . . . . . . . . . . . . . . . . . . . ............ Anti-Tamper Key
-PMIR 2 . . . . . . . . . . . . . . . . . . . . . . . . ............ PMI Test Report, 2 Valve
Common
-PM I R 3 . . . . . . . . . . . . . . . . . . . . . . . . ............ PMI Test Report, 3 Valve
-PM I R 5 . . . . . . . . . . . . . . . . . . . . . . . . ............ PMI Test Report, 5 Valve
-SRPBN . . . . . . . . . . . . . . . . . . . . . . . . ............ Seal Ring, PTFE, IEC B
Seal Ring, Reinforced PTFE,
-SRPYN . . . . . . . . . . . . . . . . . . . . . . . . ............
Special Connection for High Pressure Type
-SRGBN . . . . . . . . . . . . . . . . . . . . . . . . ............ Seal Ring, Graphite, IEC B

Ordering Information – Accessory 23

Products are designed and manufactured by Armaturenfabrik Franz Schneider (AS-Schneider)
for Yokogawa Electric Corporation.

Armaturenfabrik Franz Schneider GmbH + Co. KG AS-Schneider Asia-Pacific Pte. Ltd.

World Headquarters 970 Toa Payoh North, #02-12/14/15, Singapore 318992,
Bahnhofplatz 12, 74226 Nordheim, Germany Singapore
Tel: +49 7133 101-0 Tel: +65 62 51 39 00
http://www.as-schneider.com   http://www.as-schneider.sg

Armaturenfabrik Franz Schneider SRL AS-Schneider America, Inc.

Str. Basarabilor, Nr. 7, 100036 Ploiesti, Romania 17471 Village Green Dr, Houston, TX 77040, U.S.A.
Tel: +40 244 384 963 Tel: +1 281 760 1025
http://www.as-schneider.ro http://www.as-schneider.com

AS-Schneider Middle East FZE

P.O. Box 18749, Dubai, United Arab Emirates
Tel: +971 4 880 85 75
http://www.as-schneider.ae YS-2601-EN I April 2017 / 2nd Edition

are registered trademarks of Yokogawa Electric Corporation.

Other company names and product names used in this material are registered trademarks or trademarks of their respective owners.

YOKOGAWA ELECTRIC CORPORATION

World Headquarters
2-9-32, Nakacho, Musashino-shi, Tokyo 180-8750, Japan
http://www.yokogawa.com

YOKOGAWA CORPORATION OF AMERICA

2 Dart Road, Newnan, GA30265, U.S.A.
http://www.yokogawa.com/us/

YOKOGAWA EUROPE B.V.

Euroweg 2, 3825 HD Amersfoort, The Netherlands
http://www.yokogawa.com/eu/

YOKOGAWA ENGINEERING ASIA PTE. LTD.

5 Bedok South Road, Singapore 469270 Represented by:
http://www.yokogawa.com/sg/

YOKOGAWA CHINA CO., LTD.

3F TowerD Cartelo Crocodile Building, No. 568 West Tianshan Road,
Shanghai 200335, China
http://www.yokogawa.com/cn/

YOKOGAWA MIDDLE EAST B.S.C.(c)

P.O. Box 10070, Manama
Building 577, Road 2516, Busaiteen 225, Muharraq, Bahrain
http://www.yokogawa.com/bh/