Scribd
Upload
3K views7 pages

Huawei OLT Configuration Step by Step Guide 2023

Huawei OLT Configuration step by step Guide 2023 provides a 6 step guide to configure a Huawei OLT: 1. Access the OLT's default IP address of 10.11.104.2 through the ETH port. 2. Check the number of service boards detected and confirm them. 3. Assign an IP address of 192.168.2.100 to VLAN 100 for remote management. 4. Configure GPON ports by creating DBA, line, and service profiles and enabling auto-discovery of ONUs. 5. Find the serial number of an ONU to authorize and add it, assigning its VLAN and other settings. 6. Create

Uploaded by

Aitsam Younas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
3K views7 pages

Huawei OLT Configuration Step by Step Guide 2023

Huawei OLT Configuration step by step Guide 2023 provides a 6 step guide to configure a Huawei OLT: 1. Access the OLT's default IP address of 10.11.104.2 through the ETH port. 2. Check the number of service boards detected and confirm them. 3. Assign an IP address of 192.168.2.100 to VLAN 100 for remote management. 4. Configure GPON ports by creating DBA, line, and service profiles and enabling auto-discovery of ONUs. 5. Find the serial number of an ONU to authorize and add it, assigning its VLAN and other settings. 6. Create

Uploaded by

Aitsam Younas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

Huawei OLT Configuration step by step Guide 2023

Huawei is a well-known brand for networking equipment like switch routers and lots of products. If
you are planning to deploy your secured network for your ISP telecom operator you need OLT (Optical
Line Terminal). Huawei olt is the best solution for your network. Do you have a Huawei OLT, do you
face problems with the initial configuration?

Don’t worry, in this article, you will learn details about Huawei olt configuration step by step guide
also Huawei OLT configuration commands.

Let’s start

Step 1 : Access huawei olt default ip address


In this step, we will connect our computer to Huawei olt via telnet. By default, Huawei OLT has a default
IP address 10.11.104.2. To access IP we need to connect an ethernet cable from the computer to the
Huawei olt ETH port. At the command line interface, you will find this port named meth0.
ETH port is designed only for management; you can’t use this port for passing traffic to customers. This
ETH port is isolated from other ports.
After connecting cable from ETH port to Computer need to change computer IP to 10.11.104.1
255.255.255.0
Now you can reach the IP address 10.11.104.2. Using ping command from pc we can make sure the
connectivity
Ping 10.11.104.1
Now will log in to olt via telnet using putty software
User name: root
User password: admin or admin123

MA5608T>
MA5608T> enable
MA5608T#config

IF you are interested to know more about the best wireless routers, Don’t forget to check our latest
article regarding wireless router review.
Step 2 : Service board Confirmation
In this step, we will check how many service boards are attached with the olt. Service board normally
EPON and GPON available. By default the Huawei 5608T has the option to add 2 service boards, 5800 x7
model support 7 pcs service board, 5800×17 support 17 pcs service board.
First, we will check how many service boards are detected by OLT and confirm those boards for
workable.
MA5608T>
MA5608T> enable
MA5608T# config
MA5608T(config)# display board 0
Using this command a list of attached boards will display with auto_find status. now we will confirm
those board
MA5608T(config)# board confirm 0/0
MA5608T(config)# board confirm 0/1
MA5608T(config)# display board 0
MA5608T(config)# save
That’s all now olt board show in normal or Active_normal status

Step 3 : Assign IP Address to vlan Huawei


In this step, we will allocate an IP address to VLAN Huawei olt for our remote management. We will
assign 192.168.2.100/24 IP address to VLAN 100 and the gateway/router IP address is 192.168.2.1 (Ip
address will change according to your network).
First, we will create VLAN 100 and assign this VLAN 100 to uplink port 3.
MA5608T>enable
MA5608T#config
MA5608T(config)#vlan 100 smart
MA5608T(config)#vlan name 100 management
MA5608T(config)#port vlan 100 0/2 2
MA5608T(config)#quit
MA5608T#save
That’s all we have successfully created VLAN and assign it to uplink port 3. Now we will assign the IP
address
MA5608T>enable
MA5608T#config
MA5608T(config)#interface VLAN 100
MA5608T(config-if-vlanif100)#ip address 192.168.2.100 255.255.255.0
MA5608T(config)#ip route-static 0.0.0.0 0.0.0.0 192.168.2.1

Ip address setup complete. Now we can reach Huawei olt by 192.168.2.100 using this IP address from
our local network. If you want to access from a remote network you need to assign a public IP address
using the same procedure

Step 4 : Gpon Huawei Configuration


In this step, we will configure the gpon pon ports for the passing service using onu. Assume we will pass
traffic using VLAN 101 to all pon ports using the below step.
Enable PON Ports
DBA Profile
Line Profile
Service Profile
how to add ont in huawei olt
Creating Service Port
All types of GPON OLT like VSOL Gpon OLT need to create DBA, LINE, Service profiles.

1. Enable PON Ports


In this step, we will enable pon ports for automatically found onu. When you connect onu to your
network ONU will automatically be recognized by OLT.
Assume we are using 5608T OLT with GPBD Service board where has 16 pon ports. We will enable pon
port using the below command
MA5608T>enable
MA5608T#config
MA5608T(config)#interface gpon 0/1
MA5608T(config-if-gpon-0/1)#port 0 ont-auto-find enable
MA5608T(config-if-gpon-0/1)#port 1 ont-auto-find enable
MA5608T(config-if-gpon-0/1)#port 2 ont-auto-find enable
MA5608T(config-if-gpon-0/1)#port 3 ont-auto-find enable
MA5608T(config-if-gpon-0/1)#port 4 ont-auto-find enable
MA5608T(config-if-gpon-0/1)#port 5 ont-auto-find enable
MA5608T(config-if-gpon-0/1)#port 6 ont-auto-find enable
MA5608T(config-if-gpon-0/1)#port 7 ont-auto-find enable
MA5608T(config-if-gpon-0/1)#port 8 ont-auto-find enable
MA5608T(config-if-gpon-0/1)#port 9 ont-auto-find enable
MA5608T(config-if-gpon-0/1)#port 10 ont-auto-find enable
MA5608T(config-if-gpon-0/1)#port 11 ont-auto-find enable
MA5608T(config-if-gpon-0/1)#port 12 ont-auto-find enable
MA5608T(config-if-gpon-0/1)#port 13 ont-auto-find enableMA5608T(config-if-gpon-0/1)#port 14 ont-
auto-find enable
MA5608T(config-if-gpon-0/1)#port 15 ont-auto-find enable
Using above command we have successfully enable all pon ports
MA5608T(config-if-gpon-0/1)#display ont autofind 0
Using this command you can check if there any onu is attached to the olt

2. DBA Profile
In this step we will create a DBA (Dynamic Bandwidth Allocation) Profile. In this profile we will declare
ONU maximum bandwidth 1 GB
MA5608T>enable
MA5608T#config
MA5608T(config)#dba-profile add profile-id 10 profile-name maxbw type4 max 1024000
Here profile ID is 10 and Profile name maxbw. You have to keep in knowledge DBA Profile ID 10 for
future configuration
You May also like
Does A Router Crashes With Too Many Connections
Can An Old Router Cause Slow Internet
Why Do Routers Have Multiple Antennas
What Is MTU In Networking
3. Line Profile
In this step we will create a line for vlan 101 . Here profile ID will 10 and profile name line_vlan_101
First we will create vlan 101 and assign to uplink port 3
huawei olt vlan configuration
MA5608T>enable
MA5608T#config
MA5608T(config)#vlan 101 smart
MA5608T(config)#vlan name 101 PON
MA5608T(config)#port vlan 101 0/2 2
MA5608T(config)#quit
MA5608T#save
VLAN 101 Created successfully now we will make Line profile
MA5608T>enable
MA5608T#config
MA5608T(config)#ont-lineprofile gpon profile-id 10 profile-name line_vlan_101
MA5608T(config-gpon-lineprofile-10)#tcont 1 dba-profile-id 10
MA5608T(config-gpon-lineprofile-10)#gem add 0 eth tcont 1
MA5608T(config-gpon-lineprofile-10)#gem mapping 0 0 vlan 101
MA5608T(config-gpon-lineprofile-10)#commit
Line profile creation complete

4. Service Profile
In this step we will create a service profile for vlan 101.
Let’s start
MA5608T(config)#ont-srvprofile gpon profile-id 10 profile-name Srv_vlan_101
MA5608T(config-gpon-srvprofile-10)#ont-port eth 1
MA5608T(config-gpon-srvprofile-10)#port vlan eth 1 translation 101 user-vlan 101
MA5608T(config-gpon-srvprofile-10)#ring check enable
MA5608T(config-gpon-srvprofile-10)#ring check resume-interval 120
MA5608T(config-gpon-srvprofile-10)#commit
Here service profile is is 10 and service profile name Srv_vlan_101
we have almost complete Huawei OLT Configuration step by step and have a few step for how to add
ont in Huawei olt lets start

5. How to add ont in Huawei OLT/Huawei Ont Configuration


For adding ont / onu to huawei olt first need to find out onu serial number using below command

MA5608T>enable
MA5608T#config
MA5608T(config)#interface gpon 0/1
MA5608T(config-if-gpon-0/1)#display ont info 0 all
using this command we find out onu seriel number and the number is 48575443522C499D
now we will authorize onu to Huawei olt
MA5608T>enable
MA5608T#config
MA5608T(config)#interface gpon 0/1
MA5608T(config-if-gpon-0/1)#display ont info 0 all
MA5608T(config-if-gpon-0/1)#ont add 0 0 sn-auth 48575443522C499D omci ont-lineprofile-id 10 ont-
srvprofile-id 10 desc test
MA5608T(config-if-gpon-0/1)#ont port native-vlan 0 0 eth 1 vlan 101 priority 0
Onu address successfully now onu PON/REG led will stop blinking.

6. Creating Service Port


Now we will create service port for ONU using below command
MA5608T>enable
MA5608T#config
MA5608T(config)#service-port 0 vlan 101 gpon 0/1/0 ont 0 gemport 0 multi-service user-vlan 101 tag-
transform translate
MA5608T(config)#quit
MA5608T#save
Thats all onu adding complete.
If you need to delete ONT in Huawei olt have a look how to delete ONT in Huawei OLT

Conclusion
Huawei Gpon OLT configuration from command-line interface its a little bit difficult. But this article we
described Huawei OLT Configuration step by step. Now you can easily configure Huawei olt
configuration. If you have any queries regarding Huawei olt configuration you may contact us.

If you have interested to know more about home network setup diagram or wireless router or poe
switch have a look my website

You might also like