Scribd
Upload
36 views2 pages

TE-24100 AMP Read Me

This document provides instructions for building an amp to practice scoring game pieces using wood, plywood, screws and cable ties. It includes CAD files and drawings of the assembly. A shopping list outlines the materials needed, including 3 pieces of 2x4 lumber, 1 sheet of 1/2" plywood, wood screws in two lengths and cable ties. Notes provide information on material quality and an example cut list.

Uploaded by

ayberkyurtsever22
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
36 views2 pages

TE-24100 AMP Read Me

This document provides instructions for building an amp to practice scoring game pieces using wood, plywood, screws and cable ties. It includes CAD files and drawings of the assembly. A shopping list outlines the materials needed, including 3 pieces of 2x4 lumber, 1 sheet of 1/2" plywood, wood screws in two lengths and cable ties. Notes provide information on material quality and an example cut list.

Uploaded by

ayberkyurtsever22
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TE-24100 AMP

Description: This is an Amp, designed so that


teams can practice scoring game pieces.

FILES INCLUDED

In this compressed folder, you will find all of


the drawings, CAD Files and STEP Files for
this design.

Drawings: For your convenience, all drawing


files have been exported to PDF Format. Each
major field assembly will have both assembly
drawings and component drawings.

CAD Files: All SOLIDWORKS files required to


build or modify the assembly.

STEP files: STEP files of the assembly are


included for the convenience of non-
SOLIDWORKS users.

SHOPPING LIST

Plywood and Lumber (Example Cut List is at end of Readme):

- 2” x 4” x 8’ Lumber – 3 Pieces
- 4’ x 8’ x 1/2” Thick Plywood – 1 Sheet

Hardware:

- #8 Wood Screws x 2.5” long – Approximately 16 Pieces


- #8 Wood Screws x 1” long – Approximately 10 Pieces
- 50lb Cable Ties – 4 Pieces

NOTE ON HARDWARE: All wood screws can be replaced with nuts and bolts of your choosing to make
the design easier to disassemble and store. If this is not a concern for your team, wood screws will make
for a sturdier assembly.

OTHER NOTES:

TE-24101 can be a tricky part to make depending on what tools are available. This part can be split into
multiple panels to be broken down into simpler cuts.

Notes about materials:

- Plywood and Hardboard Sheets – quality of plywood is up to the user. Plywood of lower
qualities may contain voids and may warp more than high quality plywood. All dimensions
listed are “nominal”. For example, ½” plywood is typically 15/32”.
- Lumber - quality of lumber is up to the user. Please keep in mind that lumber of lower
qualities may warp more than high quality lumber. All dimensions below are the “mill cut”
dimensions. For example, 2” x 4” lumber is really 1½” x 3½”.

Example Cut List (All units are Inches):

2x4 Lumber:

1/2” Plywood:

You might also like