BQ Floor Finish
BQ Floor Finish
BQ Floor Finish
Cement and sand (1:3) screed with floor hardener (FH); finished with a
steel trowelled as described to
A To floor m2 120 -
Cement and sand (1:3) screed with floor hardener (FH); finished with a
steel trowelled as described to
B To floor m2 163 -
Cement and sand (1:3) screed with floor hardener with heavy duty
exposy coating (EP); finished with a steel trowelled as described to
C To floor m2 80 -
Cement and sand (1: 3) backing screed to receive floor tiles (measured
separately) :-
D To floor m2 336 -
G To floor m2 89 -
H To floor m2 247 -
To collection RM -
Supply and lay approved vinyl floor or other equivalent laid to floor
with acrylic adhesive as described inclusive of heat welding rod all
seams and joint in welding rod of matching / constrast in colour and
described:-
D 150mm high skirting to wall complete with cove and capping strip m 1,966 -
F 150mm high skirting to wall complete with cove and capping strip m 18 -
H 150mm high skirting to wall complete with cove and capping strip m 16 -
Prepare and apply vapour sealer followed by 50mm thick mineral foam
of 2.0Ibs/ft2 density P.U Foam to slab
J To floor m2 4,907 -
To collection RM -
COLLECTION PAGE ;